The equipment has been tested and found to comply with the limits for a Class B device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy, and, if not installed and used in accordance with instructions, may cause
harmful interference with radio communications. However, there is no guarantee that radio
interference will not occur in particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to contact the dealer or an experienced Radio/TV technician for
help.
You are cautioned that any changes or modifications not expressly approved in this manual could
void your authority to operate this equipment.
CAUTION
l The use of optical instruments with this product will increase eye hazard.
l Because the invisible laser beam in this compact disc player is harmful to the eyes, do not
attempt to disassemble this cabinet. Refer servicing to qualified personnel only.
SAFETY CERTIFICATION
This Compact Disc Player is made and tested to meet exacting safety standards. It meets FCC
requirements and complies with safety performance standards of the US Department of Health and
Human Services.
Owner’s Record
The model and warranty numbers are located on the top of the unit. Record the warranty (serial)
number in the space provided below. Refer to these numbers whenever you call upon your
Blaupunkt dealer regarding this product.
Warranty Number
Attach Sales Receipt Here
2
Table of Contents
English
FCC Warning
Owner’s
Features ...........................................................4
Precautions
Detachable
Electrical Connections and Installation
Installation
Maintenance
Specifications
Location of
instructions-General
Audio
Radio Operation
CD
Auxiliary Input Jack
Troubleshooting
Avertissement
Archive du Proprietaire
Caracteristiques
Precautions
Face
Specifications
Mode General..
Fonctionnement de
Guide de Depannage
Operation
Player Operation
Avant Amovible
Raccordements et Installation..
Installation
Entretien
Congratulations on your purchase of this Blaupunkt CD Receiver. Its III-US FM/AM Tuner
and Laser/Anti-Vibration Anti-Shock CD Player mechanism provide the ultimate in sound
reproduction. Its high-power amplifier and preamp output provide you with tremendous
system configuration flexibility. Its auxiliary input jack lets you easily incorporate portable audio
equipment, such as a cassette or DAT player, into your car’s sound system.
l III-US Tuner Features:
Multipath Management
ASU Electrical Impulse Noise Reduction
Superior AM Frequency Response
15 AM Presets, Including 5 FM
5 AM Travelstore Presets
-Station Scan
-Local/Distant Seek Manual Tuning
l CD Player Features
-Track Up/Down
Scan, Mix, Repeat
-Cue/Review Pause/Play
-CD IN Indicator
-Last Position Memory
3-Beam Laser Pick-Up
1 Bit/8 Times Oversampling Digital Filter
Silicone-Oil Dampened Anti-Vibration and
Anti-Shock CD Mechanism
Your unit’s detachable front faceplate makes the unit useless to would-be thieves.
l Audio Features:
35 Watts x 4 Channel Integrated Amplifier
Dual-Level Fader
-Over 3 Volts of Distortion-Free Preamp Output
Low lmpendance (100 Preamplifier
RCA Preamp Output Harness Included
Balance, Fader Controls
-Adjustable Maximum Turn-On Volume
Loudness Button
-Mute Button
-Auxiliary Input
l
Other Features:
-Detachable Face
-Display Priority Control
-Temporary Display Change Control
-Clock/Ignition-Off Clock Recall
Chassis
-Detachable Wire Harness
-Snap-In DIN Sleeve Mounting Hardware
-Side-Mount Compatible
Engineered and Manufactured By Blaupunkt.
Traffic Safetv and Precautions
l Do not adjust your unit in difficult driving conditions that demand your full attention.
l As the driver of a motor vehicle, it is your responsibility to pay attention to the traffic situation at all
times. Never use your unit in a way that could distract you.
l Always make sure that you are still able to hear any warning signals coming from outside of the
vehicle, such as police or fire engine sirens, so that you can react accordingly.
l If your vehicle was parked in direct sunlight resulting in a considerable rise in temperature inside
the vehicle, allow the unit to cool off before operating your unit.
l The use of optical instruments with this product will increase eye hazard.
l Because the invisible laser beam in this compact disc player is harmful to the eyes, do not
attempt to disassemble this cabinet. Refer servicing to qualified personnel only.
l You are cautioned that any changes or modifications not expressly approved in this manual could
void your warranty.
l Car Wash precaution If you have a motorized antenna, make sure to turn off the unit not just
the tuner so that the antenna is lowered and antenna damage is prevented.
Face
Detaching Attaching the Face:
The face of this unit can be detached and taken with you to prevent it from being stolen.
Detaching the Face:
Press the REL (Release) Button and detach the face by gently pulling it off as illustrated.
Note: Do not pull it straight out from the chassis. Be sure not to drop the face when detaching it
from the chassis.
Attaching the Face:
Apply the right hand side of the face to the chassis by sliding (part B) of the face to (part A) at the
front of the chassis. Gently push the left side of the face against the front of the chassis until it
snaps into place.
Note: Make sure that the face is inserted right side up. Do not press against the display window.
Do not press hard against the face when attaching it to the chassis, it may be easily attached with
gentle pressure. Do not expose the face to direct sunlight, heat sources such as hot air ducts or
leave it in a humid place. Never leave it on the dash board of a vehicle parked in direct sunlight,
where there may be a considerable rise in temperature inside the vehicle.
Affixing Faceplate For Retail Display:
The faceplate can be affixed to the unit’s chassis, which is desirable for a display, for
example.
To affix the faceplate:
Insert the black bolt into the hole at the left front of the top of the radio. See* below.
Connections and Installation
To avoid the aggravation of costly mistakes and serious damage that could make
you feel this way, please carefully read all of the instructions before you begin. Carefully follow all
instructions. You’ll be glad you did!
GENERAL RECOMMENDATIONS
l If you’re not confident that you can install the unit correctly, have it installed by a qualified
Blaupunkt installation technician.
l Use this unit only with negative ground 12 Volt (11-16 Volt) direct current (DC).
l Be sure to detach the faceplate before you start to connect or install the unit.
l Don’t assume a seemingly matching wire harness in the vehicle has leads are compatible with the
unit’s wire harnesses.
l We recommend making and testing all electrical connections before installing the unit. Connect
the leads (wires) according to instructions and diagram below.
ELECTRICAL CONNECTION INSTRUCTIONS
1.
Disconnect the vehicle battery’s negative terminal before making connections.
Connect the speakers and/or external amplifiers (if you have any) following the guidelines in
2.
the SPEAKER CONNECTION section below.
Connect the blue (trigger output) lead to the amplifier’s trigger input terminal and/or antenna
3.
motor trigger input terminal (if you have either or both of these items). The combined total
amperage required for triggering the antenna motor and/or amplifier must not exceed 300
DO NOT connect the blue lead to the antenna’s and/or amplifier’s power supply input.
4.
Connect the black (power ground) lead to a grounded metal part on the vehicle. We
recommend grounding all audio system black ground leads (head unit, external amplifier, etc.)
to a common grounding point, preferably a non-painted surface under the instrument panel.
5.
Connect the yellow (constant power) input lead to a source of constant battery power,
preferably a terminal to an appropriate slot in the fuse box.
6.
Connect the red (turn-on power) input lead only after the other leads are connected. Be sure to
connect the red lead to a positive (+) 12 Volt power terminal that is energized only when the
ignition key is set to the on position or accessory position.
7.
Cover the ends of any unused leads with electrical tape. This will prevent them from touching
the vehicle or each other and causing a short-circuit and damage to the radio or vehicle.
a.
Reconnect the vehicle’s battery.
9.
Verify that no fuses have blown.
10.
Plug the harness into the unit.
11.
Attach the faceplate and test the unit.
Once the connections have been successfully made, you can begin to mount the unit.
SPEAKER CONNECTIONS
The unit’s Dual-Level Fader allows you to fade between the front and the rear channels using either
the front and/or rear speaker leads and/or the rear preamp outputs, providing you tremendous
flexibility in configuring your speaker arrangement:
l You can connect a speaker (regular, co-axial or tri-axial speakers or component speaker system,
all hereafter referred to simply as “speaker”) to each of the units’ four pairs of speaker leads.
l You can connect the 2 RCA preamp outputs to multiple external amplifiersand power multiple
speakers or speaker systems through the amplifiers. (Blaupunkt amplifiers and speakers available
separately). To add front preamp output, purchase Blaupunkt part 6634494216. (See page 11)
l You can use either or both of these two methods.
Connecting the Speaker Leads
To prevent short circuits or serious damage to the unit and/or speakers:
l Connect the speaker leads only as indicated in the wiring diagram. Disconnect the vehicle
battery’s negative terminal before making connections.
l Only use speakers that have impedance ratings of 4 ohms or higher and have power-handling
capabilities greater than the receiver’s stated power level.
l The unit’s internal amplifier is designed to handle a 4-ohm load on each pair of speaker leads.
6
Loading...
+ 11 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.