To release the detachable panel (theft
protection).
Press this knob and remove the
release panel.
2 ON - Power up/down
Press this button to turn the equipment
on. It will play at the preset volume. If
you press this button briefly during radio reception, the volume will turn
down instantly (MUTE).
This function is cancelled by pressing
the ON button again. You can programme the mute volume (refer to
“DSC programming”).
Press the button for about 2 seconds
to turn the unit off.
Switching on/off via the ignition:
If the set has been connected correspondingly, it can also be turned on
and off with the vehicle ignition.
Press the ON button to keep on operating the set when the ignition is
switched off.
The set will switch on. To avoid that
the battery goes flat, the system will be
turned off automatically after one hour
of playback.
3 Volume knob
Turn the knob to set the volume.
4
Eject
Press this button to eject the cassette.
5 Cassette slot
Insert the tape into the slot with the
open side showing to the right. The
tape will be played in the direction previously selected.
6 Display
Displays all settings, operating modes
and functions.
7 FR Fast Rewind
To fast rewind the tape.
8 FF Fast Forward
To fast forward the tape.
7 + 8 Reversing the tape (PROG)
Press both buttons simultaneously.
9 Rocker switch
Radio mode
/ Seek tuning
Up
Down
<</>> Up/down in short intervals
(on FM only if „AF“ is off)
For FM only:
<</>> Scrolling through the broadcasting
networks, if AF is on. Example:
NDR 1, 2, 4, N-Joy, FFN ...
Changer mode
Optional:
Freiburg RCM 148, Siena RCM 148,
Louisiana RCM 148
Included:
Kingston DJ, St. Louis DJ
Select CD
Up
Down
ENGLISHDEUTSCHFRANÇAISITALIANO
NEDERLANDS
SVENSKAESPAÑOL
25
PORTUGUÊS
Select title
Up: press briefly
CUE - fast forward (audible): hold
button down.
Down: press two or more times
briefly
Repeat title: press briefly.
REVIEW - fast reverse (audible):
hold button down.
Extra function of rocker switch:
For additional settings use
AUDF
DSC-MODE E
PTY<
Requirement: The respective function
is activated.
: SRC/SC
(SRC = audio source, SC = scan)
Press button briefly to select the operating mode (tuner, cassette, changer).
The active mode appears in the display.
Press SRC/SC longer to select the
SCAN function (samples radio stations
and titles).
Use DSC programming to set the scan
time.
Radio mode
Press SRC/SC longer.
The radio will scan all receivable FM
stations. “SCAN” and the station name
appear on the display one after another.
PTY Scan
PTY Scan can be started if PTY is on
(“PTY” will be displayed).
The radio will scan all stations broadcasting the selected programme type.
Changer mode
Press SRC/SC longer.
“SCAN” will be displayed.
To stop CD Scan: Press SRC/SC
again.
; AF·TA
Alternative Frequency in RDS mode:
TA (Traffic Announcement = priority
for traffic programs)
If “AF” is displayed, the radio will automatically search for a radio frequency
offering the same programme in a better quality (using RDS).
TA on/off:
Press AF·TA briefly: “TA” will be displayed, priority for traffic programs activated.
Press AF·TA briefly: TA off.
“TP” will be displayed when a traffic
programme is played.
AF on/off:
Press AF·TA longer: a beep will be
emitted; “AF” appears.
Press AF·TA longer: a beep will be
emitted; “AF” disappears.
< PTY (Programme Type)
You can select among various programme types. Using the rocker switch
<< >> it is possible to recall all PTY
programme types, if PTY is activated
(“PTY” lights up in the display).
= BA/TS
Switches between the wavebands/
memory banks FM1, FM2, FMT
(Travelstore), MW and LW
(Freiburg
RCM 148, Kingston DJ without MW,
LW)
.
Extra function: Travelstore
To store the six most powerful radio
stations in the Travelstore bank:
Press BA/TS until a beep sounds and
“T-STORE” appears.
26
>...C - Preset buttons 1 to 6
Radio mode
You can store six stations in each
memory bank (1, 2, and “T”).
On MW and LW you can store six stations each
148, Kingston DJ)
(except for Freiburg RCM
.
Store station - hold down a preset
button in radio mode until a beep is
emitted.
Recall station - select a waveband
and also the memory bank on FM;
press the relevant preset button briefly.
The selected preset button will briefly
appear in display field 1 (e.g. P1).
Changer mode
3/ - Pause
Interrupts CD play. “PAUSE” appears.
Press button again to restart CD play.
4/RPT
Repeat title: press 4/RPT. “REPEAT-T”
appears briefly. The title will be repeated until 4/RPT is pressed again.
Repeat CD: select “REPEAT-D”.
Switch REPEAT-D on:
•Hold 4/RPT down until a beep is
emitted.
5/MIX
“MIX CD” plays the titles of one CD in
random order.
“MIX ALL” plays the titles of all CDs of
one changer magazine in random order.
To turn MIX on/off:
Press 5/MIX briefly.
The current setting is briefly indicated
in the display: “MIX-CD”.
Switch MIX-ALL on:
•Hold 5/MIX down until a beep is
emitted.
DIS - clock display
D
Radio mode
Press this button briefly and the time
will be displayed for a while.
Changer mode
Press this button to switch the display
between CD number and CD time indication.
Cassette mode
Press this button to switch the display
between the cassette direction and
clock indication.
E DSC Direct Software Control
Adjusts programmable basic settings.
Refer to “DSC programming”.
F AUD
Default settings for treble and bass
You can store different settings for the
FM, MW, LW, cassette and CD mode
(Freiburg RCM 148, Kingston DJ without MW, LW)
.
Setting the tone:
Select the audio mode. Press AUD
once and set the tone using the rocker
switch.
Treble:
Treble +
Treble –
Bass:
Bass –
Bass +
Press AUD twice and set the fader
using the rocker switch.
Fader front
Fader rear
Balance left
Balance right
The selected values will appear in the
display. The last setting is stored automatically.
ENGLISHDEUTSCHFRANÇAISITALIANO
NEDERLANDS
SVENSKAESPAÑOL
27
PORTUGUÊS
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.