Radio / Cassette
Chicago RCM 169
Hannover 2000 DJ
Kansas DJ
Montreal RCM 169
Paris RCM 169
Operating instructions
1 |
2 |
3 |
4 |
5 |
13 |
12 |
11 |
10 |
9 |
8 |
7 |
6 |
19
|
|
14 |
18 |
Chicago RCM 169 |
|
|
|
||
|
|
|
2 |
Option / Optional / |
|
|
15 |
Tilval / Optie / |
|
|
|
|
||
|
|
|
Opcional / Opção: |
|
|
|
|
|
|
|
|
|
20 |
Hannover 2000 DJ |
|
|
1 |
21 |
Kansas DJ |
|
|
|
||
3 |
17 |
16 |
|
Montreal RCM 169 |
|
Paris RCM 169 |
|||
|
|
2
Table of contents
Quick Reference ........................... |
45 |
RC 08 remote control unit ........... |
53 |
Important notes ............................ |
54 |
What you need to know ........................ |
54 |
Traffic safety ......................................... |
54 |
Installation ............................................. |
54 |
Telephone mute .................................... |
54 |
Accessories .......................................... |
54 |
Guarantee ............................................. |
54 |
International telephone information ...... |
54 |
KeyCard theft protection system 55 |
|
Putting the unit into operation .............. |
55 |
Removing the KeyCard ........................ |
55 |
“Training” a second KeyCard/ |
|
Replacing a KeyCard ............................ |
55 |
Displaying the radio pass data ............. |
56 |
Short Additional Memory (S.A.M.) ........ |
56 |
Turn On Message (T.O.M.) .................. |
56 |
Optical display as theft protection ........ |
56 |
Care of your KeyCard ........................... |
57 |
Lost or damaged KeyCard ................... |
57 |
Training the new KeyCard .................... |
57 |
Selecting the operating mode ..... |
58 |
Optimising display legibility ....... |
58 |
Radio operation with RDS ........... |
59 |
AF - Alternative frequency .................... |
59 |
REG - regional program ....................... |
59 |
Selecting a waveband .......................... |
60 |
Station tuning ........................................ |
60 |
Storing stations ..................................... |
61 |
Selecting the seek tuning sensitivity .... |
62 |
Switching from stereo to mono (FM) .... |
63 |
Automatic bandwidth adjustment |
|
(SHARX) ............................................... |
63 |
PTY - Program Type ............................. |
63 |
Program type ........................................ |
63 |
Traffic information station |
|
reception with RDS-EON ............. |
66 |
Traffic announcement priority on/off .... |
66 |
Warning beep ....................................... |
66 |
Switching the warning beep off ............ |
66 |
Automatic search function .................... |
66 |
Adjusting the volume for traffic |
|
announcements and the warning beep .. |
66 |
Cassette operation ....................... |
67 |
Dolby B NR* .......................................... |
67 |
Selecting the display mode .................. |
67 |
Track reverse ........................................ |
68 |
Scanning cassette titles with SCAN ..... |
68 |
Selecting titles with S-CPS ................... |
68 |
Repeating titles with RPT ..................... |
69 |
Fast tape forward/rewind ...................... |
69 |
Listening to the radio while fast forwarding |
|
or rewinding the tape with Radio Monitor 69 |
|
Automatically skipping over blank portions |
|
of the tape with Blank Skip (BLS) ........... |
69 |
Care instructions ................................... |
69 |
Changer operation ....................... |
70 |
Switching on CD changer operation ..... |
70 |
Selecting the display mode .................. |
70 |
Selecting CDs and tracks ..................... |
70 |
Repeat tracks/CDs with RPT ................ |
71 |
TPM (Track Program Memory) ............. |
71 |
MIX ........................................................ |
72 |
SCAN .................................................... |
72 |
Entering CD names .............................. |
72 |
Deleting CD names/TPM with DSC |
|
UPDATE ............................................... |
73 |
Clock - Time .................................. |
74 |
Correcting the clock after the power |
|
has been disconnected ......................... |
74 |
Deactivating the hour correction |
|
function ................................................. |
74 |
Setting the equaliser .................... |
75 |
Notes on making the settings ............... |
75 |
Setting recommendations on the |
|
Internet .................................................. |
75 |
Assistance in setting your equaliser ..... |
76 |
DSC programming ....................... |
77 |
Overview of the DSC factory settings .. |
80 |
Specifications ............................... |
80 |
Glossary - |
|
Technical Terminology ................ |
81 |
Index .............................................. |
83 |
Installation and |
|
connection instructions ............ |
333 |
44
Quick Reference
1Unlocking the fold-down operating panel
It is possible to insert or remove the KeyCard and the cassette when the
operating panel is unlocked.
To unlock the panel press 1, the operating panel will fold down. The operating panel cannot be removed. Do not use the panel as a rest or shelf.
To lock the panel, push it back into its starting position (arrow 3).
2
1
3
For safety’s sake, the operating panel must remain locked when the vehicle is in motion.
When you leave the vehicle, unlock the panel and remove the KeyCard to protect the equipment against theft.
2ON
Switching the unit on:
With the KeyCard inserted, press ON briefly.
The unit will begin to play in the operating mode selected last at the pre-set volume.
To switch off the unit:
Press ON for approx. 1 second.
The viewing angle of the display can be adjusted individually to ensure optimum legibility. If necessary, refer to the section on “Optimising the display legibility”.
Switching the sound on/off:
Press ON briefly. When the sound has been switched off, “MUTE” will appear in the display.
The sound can be switched on again by turning the volume knob 3.
Switching the unit on/off with the KeyCard:
The unit switches on or off when the KeyCard is inserted or removed. Refer to section @ in the Quick Reference on the KeyCard theft protection system.
Switching the unit on/off with the ignition:
If the unit has been connected accordingly, it can be switched on and off with the car ignition.
After you switch off the ignition, a double beep will sound to remind you to remove the KeyCard and take it with you.
Switching the unit on with the ignition switched off:
After you have switched off the ignition (KeyCard is inserted in the unit), you can continue to operate the unit as follows:
After the double beep press ON. The unit will switch on.
After the unit has played for an hour it will switch off automatically to prevent the car battery from running down.
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS
45
Quick Reference
3Adjusting the volume
Turn the knob to adjust the volume as desired.
The volume level selected will appear in the display. When the unit is switched on, it will automatically play at the pre-set volume (ON VOL).
It is possible to adjust the ON VOL (refer to “DSC programming - ON VOL”).
4Softkeys / Display
Softkey = key with different functions The functions which appear in the display can be selected.
Radio operation
While listening to the radio you can press TU to switch between menu level 1 and menu level 2.
The unit will return to menu level 1 automatically 8 seconds after the last key is pressed.
Menu level 1
Station keys and memory levels
NEXT - FM
Switches between the memory levels for FM I, FM II, FM T.
NEXT - AM (MW, LW)
Switches between the MW and LW wavebands.
ST1 - ST6
On this memory level it is possible to store radio stations on the FM levels I, II and “T” on the keys marked ST1 to ST6. 6 stations each can be stored for the MW and LW wavebands.
Storing a radio station - Press one of the station keys from ST1 to ST6 until it is possible to hear the program again (beep).
Recalling a radio station - Select the desired waveband. For FM press NEXT to select the memory level required and press the corresponding station key briefly.
Menu level 2
Adjusting the radio functions
NEXT - FM
Switches between the memory levels for FM I, FM II, FM T.
NEXT - AM (MW, LW)
Switches between the MW and LW wavebands.
BND
Selects the waveband and memory level (FM I, FM II, FM T, MW, LW).
SCA - Scan
a) PTY is switched off
(lettering is lit normally, not highlighted in the display)
Press SCA briefly (Radio Scan) - “SCAN” will flash in the display alternately with the abbreviation for the station being scanned. All of the radio stations within reception range will be scanned.
46
Quick Reference
Press SCA for approx. 1 second (Preset Scan) -
You will hear a beep and “SCAN” will flash in the display alternately with the abbreviation for the station being scanned. The radio stations which have been stored on the station keys and which are currently within reception range will be scanned.
Stopping Radio Scan / Preset Scan: Press SCA or the rocker switch once again.
b) PTY is switched on
(lettering is highlighted in the display)
Press SCA -
the stations broadcasting the programs for the PTY program type selected will be scanned.
AF (Alternative Frequency for RDS operation)
If “AF” is highlighted in the display, the radio will automatically search for a
frequency with better reception for the station you are tuned into.
AF on/off: Press TU to select menu level 2 and press AF briefly.
EXIT
Press this key briefly to end or cancel an adjustment.
ENT (Enter)
Press this key briefly to accept or store an adjustment.
TS (Travelstore)
If you press TS, the radio will switch to FMT from any other waveband. The six stations with the strongest reception will be stored automatically. After the stations have been stored, the radio will tune into the station with the best reception and begin to play.
PTY
(Program Type)
With PTY the station keys become program type keys.
“PTY” must be highlighted in the display (press PTY if necessary).
Now it is possible to select a program type such as NEWS, SPORT, POP, and store it on one of the station keys.
Press << >> to activate the PTY program types and press the station keys to store them (press the key for approx. 2 seconds, until you hear a beep).
REG (Regional function)
This function is active when “REG” is highlighted in the display.
REG on/off: Press TU to select menu level 2 and press REG briefly.
If necessary, refer to the section on REG - Regional in the more detailed instructions.
Cassette operation
In the cassette mode, the softkeys can be used to select the corresponding cassette functions.
REVerse
Switches to the opposite track (side). The display indicates which track is currently playing (Side A/B).
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS
47
Quick Reference
SCA (Scan)
Briefly scans the cassette titles. Starting/ending Scan: Press SCA. When the function is active, “SCAN” will appear in the display.
RPT (Repeat)
To repeat the scanned or the next title. The title will repeat until RPT is switched off.
The Repeat function will end automatically when the cassette is removed or the set is switched off.
Switching Repeat on/off: Press RPT, the activated function will appear briefly in the display to indicate whether it is switched on or off.
Dolby B NR*
Cassettes recorded using Dolby B NR will playback in the best quality when the symbol appears on a highlighted background.
*The noise reduction system is manufactured under licence by the Dolby Laboratories Licensing Corporation. The word DOLBY and the dou- ble-D symbol are trademarks of the DOLBY Laboratories.
RM (Radio Monitor)
To listen to the radio while fast forwarding or rewinding the tape. When “RM” appears highlighted in the display, it is possible to listen to the radio while the tape is rewinding or forwarding.
Switching Radio Monitor on/off: Press RM, the activated function will appear briefly in the display to indicate whether it is switched on or off.
BLS (Blank Skip)
The set skips over blank portions of
the tape when “BLS” appears highlighted in the display. As soon as there is a break of more than 10 sec. during cassette playback, the fast forward function will be activated to move to the next title.
Switching Blank Skip on/off: Press BLS, the activated function will appear briefly in the display to indicate whether it is switched on or off.
Changer operation
In the changer mode, the softkeys can be used to select the corresponding changer functions.
MIX
CD tracks will be played in random order.
Press the MIX key to select the following functions:
-MIX CD = the tracks on the CD will be played in random order.
If you are using a CD changer, the CDs will be selected in numerical order and the tracks in random order.
-MIX MAG = all of the tracks on all of the CDs in the magazine will be played in random order.
-MIX OFF = switches the function off.
SCA - Scan
Scans all of the tracks on a CD.
48
Quick Reference
Start Scan:
Press SCA. The tracks will be scanned in ascending order one after the other. The scan time can be adjusted (see “DSC programming - SCANTIME”).
Stop Scan:
Press SCA. The track scanned last will begin to play.
RPT - Repeat
CD tracks or CDs in the CD changer can be repeated as often as desired. Press the RPT key to select one of the following functions:
-REP TRCK = Repeat track
-REP CD = Repeat CD
-RPT OFF = switches the function off
TPM - Track Program Memory
Stores and plays your favourite tracks. It is possible to manage up to 99 CDs with up to 40 tracks. (Refer to the section on “TPM programming”.)
5TA (Traffic Announcement = priority for traffic information)
“TP” will appear in the display when the radio is tuned into a traffic information station.
“TA” will appear in the display when the priority for traffic information has been activated.
The radio will then play traffic information radio stations only.
Priority on/off: Press TA.
Interrupt an announcement: Press TA or EXIT.
6Rocker switch
Radio operation
If you press the rocker switch when the unit is on menu level 2, it will automatically return to menu level 1.
CLR |
|
To clear the TPM memory. (See the |
/ Station seek tuning |
section on “TPM - Deleting the memo- |
up |
ry”) |
down |
|
<< / >> down/up in short intervals |
|
(for FM only when AF and PTY are |
|
switched off) |
For FM only:
<< / >> Pages through the station chain with AF on and PTY off
e.g.: NDR 1, 2, 3, 4, N-JOY, ...
Cassette operation
/ Select title (S-CPS)
forwards back
>> fast forward
<<fast rewind
Changer operation
<< / >> Select CD
>> up: Press briefly
<<down: Press briefly
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS
49
Quick Reference
/ Select track
up: Press briefly
CUE - fast forward (audible):
Hold pressed down
down: Press twice or repeatedly briefly
To restart the track: Press briefly
REVIEW - fast reverse (audible):
Hold pressed down
Additional functions for the rocker switch:
Other adjustments are possible with
AUD 8
DSC-MODE 7
PTY
as long as the corresponding function is activated.
7DSC (Direct Software Control)
Using DSC it is possible to adjust the programmable basic settings. Further information: “DSC programming”.
8AUD
Adjusts treble, bass, balance (left/ right), fader (front/rear) and Loudness. Loudness = Boosts low frequency for more bass and a better adjustment to the human ear.
Kansas DJ, Chicago RCM 169:
For FM, AM, CD, AUX and TA it is possible to store different treble, bass and loudness settings.
How to make the settings:
Select the operating mode.
Press AUD once, “BASS” and the level currently selected will appear in the display.
Use << / >> to select the different modes.
Use / to make the corresponding settings.
The settings selected will appear in the display. The setting selected last will be stored automatically.
Special Loudness feature:
Press / to select the setting from LOUD 6 to LOUD OFF.
Switching off AUD:
Press EXIT.
If you do not alter any of the settings, AUD will switch off automatically after 8 seconds.
Additional feature
Switching the equaliser on/off (DPE ON/OFF):
Press AUD for approx. 2 seconds. “DPE ON” or “DPE OFF” will appear briefly in the display.
For more information on the equaliser: Refer to “Setting the equaliser”.
9DIS
Selects different display modes. Radio operation
Press DIS briefly:
-Name of the current radio station
-Current frequency
-PTY code
This will not work properly unless the radio is able to receive an RDS station in adequate reception quality.
50
Quick Reference
Press DIS for approx. 2 seconds: Display will alternate between the clock and the waveband (incl. the memory level for FM).
Cassette operation
Press DIS briefly:
The display mode selected will appear briefly in the display.
“COUNTER” - tape counter “CLOCK” - time
“ELAPSED” - elapsed playing time for the tape side
“REMAIN” - remaining playing time on the tape side
Changer operation
Press DIS briefly:
-CD number, track number, clock
-CD number, track number, time played
-CD name, track number
: Display
NDR2 |
- |
station name |
FM |
- |
waveband |
I, II, T |
- memory level I, II or Travel- |
|
|
|
store |
TP, TA |
- TP = Traffic Program |
|
|
- TA = Priority for traffic infor- |
|
|
|
mation is activated |
PTY |
- Program type is activated |
|
AF |
- |
Alternative frequency for |
|
|
RDS |
lo |
- Seek tuning sensitivity ad- |
|
|
|
justable with DSC |
EQ |
- Equaliser is switched on |
|
CC-IN |
- |
Cassette is inserted |
SIDE A |
- |
Side (track) A is playing |
REV |
- |
Reverse (tape side reverse) |
SCA |
- Scans cassette titles briefly |
RPT |
- Title repeat function for cas- |
|
sette operation |
|
- Dolby B NR is active |
RM |
- Radio listening during fast |
|
tape forwarding or rewind |
BLS |
- Blank tape portions will be |
|
skipped automatically |
CD 10 T3 |
- CD number and track number |
|
or |
|
|
VIVALDI |
- |
CD name |
MIX |
- CD tracks can be played in |
|
|
|
random order |
SCA |
- CD tracks are being scanned |
|
RPT |
- Repeat function for changer |
|
|
|
operation |
TPM |
- Store and play favourite CD |
|
|
|
tracks |
CLR |
- |
Delete TPM memory |
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS
51
Quick Reference
FM I, II, T |
- |
FM memory level |
or |
|
|
MW, LW |
- |
Waveband |
or |
|
|
00:20 |
- |
Time played |
or |
|
|
12:50 |
- |
Clock |
;CDC
Switches to changer operation (only if a changer is connected).
If there is no changer, the system will switch to AUX as long as AUX ON is switched on in the DSC menu.
<CC
Switches to cassette operation
=TU (TUNER)
Switches to radio operation. Switches to the memory levels/wavebands FM I, FM II, TS (Travelstore), MW and LW.
>Cassette slot
Insert cassette (Side A or 1 facing up; opening to the right).
? Visual theft protection |
Perform these steps in the reverse or- |
The following conditions must be ful- |
der to remove the KeyCard. |
filled before the light diode will flash as |
Make sure to read the information in |
a visual indication of theft protection: |
the section on “KeyCard theft protec- |
The unit is switched off; |
tion system”. |
The operating panel is folded down; |
|
The KeyCard has been removed; |
A Eject |
The DSC menu settings is switched to |
Press the Eject button briefly to eject |
LED ON (factory setting). |
the cassette. |
For more information, refer to “DSC |
|
programming, LED ON/OFF”. |
|
@ KeyCard theft protection system |
|
The KeyCard must be inserted before |
|
the unit can be operated. |
|
KeyCard
Inserting the KeyCard
Press 1 to unlock the operating panel; it will fold down forwards.
Insert the KeyCard with the contact points facing down (see illustration). Lock the operating panel.
2
1
For safety’s sake, the operating panel must remain locked when the vehicle is in motion.
When you leave the vehicle, unlock the panel and remove the KeyCard to protect the equipment against theft.
52 |
3 |
|
RC 08 remote control unit
Included with package:
Optional:
18
21
Chicago RCM 169 D << / >>, /
Hannover 2000 DJ
Kansas DJ
Montreal RCM 169
Paris RCM 169
19
20
Radio operation
Station seek tuning up
down
<< / >> down/up in short intervals (for FM only when AF and PTY are switched off)
For FM only:
<< / >> Pages through the station chain with AF on and PTY off e.g.: NDR 1, 2, 3, 4, N-JOY, ...
Cassette operation
/ Select title (S-CPS) forwards
back
BV- / V+
Volume control
CSRC (Source)
Switches operating modes
-Radio
-CC (Cassette)
-Changer (if a changer is connected)
>> fast forward
<<fast rewind
Changer operation
<< / >> Select CD
>> up: Press briefly
<<down: Press briefly
/ Select track
up: Press briefly
CUE - fast forward (audible):
Hold pressed down
down: Press twice or repeatedly briefly
To restart the track: Press briefly
REVIEW - fast reverse (audible): Hold pressed down
E
Sound mute on/off:
Press briefly. When the sound has been switched off “MUTE” will appear in the display.
Cassette operation
Switching sound on/off: Press briefly.
Track switch:
Press for approx. 1 sec.
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS
53
Important notes
What you need to know
Before using your new car audio system, please read through the following information carefully.
Traffic safety
As the driver of a motor vehicle, it is your responsibility to pay attention to the traffic situation at all times. Never use your car audio system in a way that could distract you.
Please keep in mind that you travel a distance of 14 m per second at a speed of only 50 km/h.
Should the traffic situation become particularly demanding, we advise you not to use the audio system.
Always make sure that you are still able to hear any warning signals coming from outside the vehicle, such as police or fire engine sirens, so that you can react accordingly.
Consequently, you should always select a moderate volume for playing your car audio system while you are driving.
Installation
If you would like to install your new car stereo yourself or add other audio components to existing ones, then please read the enclosed instructions on installation and connection carefully.
Telephone mute
If a car phone has been installed, it is possible to mute radio, cassette and CD playback automatically during a telephone call (telephone mute). “PHONE” will then appear in the display.
Traffic announcements continue to have priority if you have activated TA. You can interrupt traffic messages by pressing TA.
Amplifiers
All Blaupunkt amplifiers
CD changers
The following CD changers can be connected directly: CDC A 06, A 072, A 08.
The A 05 and the A 071 can be connected with the adapter cable 7 607 889 093. The CDC-A 08 is included with the Hannover 2000 DJ / Kansas DJ.
Accessories
Use only Blaupunkt-approved accessories and spare parts.
You can use the following Blaupunkt products with this unit:
RC 08 remote control unit
The RC 08 infrared remote control unit allows you to conveniently operate the most important functions from the steering wheel. This remote control unit is included with the Chicago RCM 169 and can be ordered optionally for the other units.
Guarantee
The scope of the guarantee is determined by the laws in the country where the unit was purchased.
Regardless of the legal guarantee regulations, Blaupunkt affords a 12-month guarantee.
If you have any questions about the guarantee, please contact your dealer. Your cash register receipt is a valid guarantee coupon.
International telephone information
Have you got any questions on the operation of this equipment or do you require more information?
Give us a call!
You will find the international telephone and fax number on the last page of this manual.
54
KeyCard theft protection system
This car radio comes equipped with one KeyCard, but it can also be operated with a second card.
If you have lost your KeyCard or if it was damaged, you can buy a new one from your specialised dealer.
If you use two KeyCards, the settings stored on the first card will be transmitted to the second. However, you can individually store the following functions:
Preset button assignments, bass, treble, balance and fader settings, Loudness, TA (traffic announcement volume), beep volume, LOW-EQ, HIGH-EQ.
In addition, the settings activated before the radio is switched off, such as the waveband, station, TA priority, AF, REG ON/OFF, SCANTIME, seek tuning sensitivity, ON VOL and SHARX will also remained stored.
This ensures that you will find your basic settings re-adjusted automatically as soon as you have inserted your KeyCard.
Putting the unit into operation
•Turn on the set with ON.
To insert the KeyCard, unlock the operating panel by
•pressing 1, the operating panel will fold down.
•Insert the KeyCard with the contacts facing down as shown in the illustration (arrow 1).
2
1
3
•Push the card in the direction of the arrow (2) and lock the operating panel back into position (arrow 3).
The car radio is now ready for operation.
If a wrong KeyCard is inserted, then “CARD ERR” will appear in the display.
The system will switch off after approximately ten seconds.
If another card type is inserted (e.g. phone or credit card), the display will show “WRONG KC” for approximately two seconds.
Remove the wrong card and insert the correct KeyCard.
•Press ON to turn on the set.
Removing the KeyCard |
|
|
DEUTSCH |
|
|
|
|||
To unlock the operating panel: |
|
|
||
|
|
|
||
• Press 1, the operating panel will fold |
ENGLISH |
|||
down forwards. |
||||
|
||||
• Push the card in to the right as far as |
|
|||
possible and remove it to the front. |
|
|||
|
||||
FRANÇAIS |
||||
• Push the operating panel back into po- |
||||
|
||||
sition. |
|
|||
For safety’s sake, the operating |
|
|||
|
||||
|
||||
panel must remain locked when |
ITALIANO |
|||
the vehicle is in motion. |
||||
|
||||
When you leave the vehicle, un- |
|
|||
lock the panel and remove the |
|
|||
KeyCard to protect the equipment |
NEDERLANDS |
|||
|
||||
against theft. |
|
|||
“Training” a second KeyCard/ |
|
|||
Replacing a KeyCard |
|
|||
SVENSKA |
||||
When the unit is in operation with the first |
||||
|
||||
KeyCard, you can “train” a second one to |
|
|||
be also used with the set. |
|
|||
|
||||
If you want to “train” a second KeyCard: |
|
ESPAÑOL |
||
• Insert the first KeyCard and turn on the |
|
|||
|
|
|||
set. |
|
|
||
• Press the DSC button and press / |
|
|
||
|
|
|||
to select “LEARN KC”. |
PORTUGUÊS |
|||
|
||||
• Press << or >>. |
|
|||
The display will switch to “CHANGE”. |
|
|||
|
|
|
|
55