Blaupunkt FRANKFURT 100 Operating And Installation Instructions

Download

Page 1

CAR RADIO

FRANKFURT 100

Operating and Installation Instructions

Page 2

CAUTIONS

Use only a dry or slightly moistened cloth for cleaning the car sound system. If necessary, clean the contacts of the control panel regularly using a soft cloth moistened with cleaning alcohol.

Do not dispose of your old unit in the household trash!

1 Car radio 1 Operating & installation instructions 1 Remote control (incl. battery) 1 Connecting cable chamber A 1 Connecting cable chamber B 1 Installation kits 2 Removal key

CLEANING NOTES

Solvents, cleaning and scouring agents as well as dashboard spray & plastics care product may contain ingredients that will damage the surface of the car sound system.

•

DISPOSAL NOTES

Use the return and collection systems available to dispose of the old device.

SCOPE OF DELIVERY

The scope of delivery includes:

PLACING THE DEVICE IN OPERATION Caution! Vehicle screws

Ensure vehicle screws are removed before installation. (See "Installation” instructions).

DAMAGE CONTROL

Do not drop control panel. Protect the control panel during transportation to avoid encountering with impacts and dirt.

Do not expose the control panel to direct sunlight or high temperature. Avoid direct contact with the control panel’s electrical parts.

NOTE

The car sound system will automatically turn o as soon as the control panel is removed.

DISCLAIMER

In no events shall Blaupunkt be liable for any direct, indirect, punitive, incidental, special consequential damages, to property of life, improper storage, whatsoever arising out of or connected with the use or misuse of our products.

USA & CANADA : Products not intended for sales in the United States and Canada. If purchased in the U.S. or Canada, this product is purchases as-is. No warranty, express or implied is provided in the U.S. and Canada.

Page 3

1 3 5

2 4 6

STRUCTURE

10.

11.

VOLUME/MODE

Turn knob left or right to increase/decrease volume or press continuously to select FLAT/POP/ROCK/CLASS/BASS/TRE/BAL/FAD

BND/AMS

Radio mode : Press to change radio band (18FM) or press & hold to preset button 1~6 with auto memory stations. USB/SD mode : Press into song to select mode, turn VOLUME knob to select song and press VOLUME knob to start playing.

Power/MUTE

Press to mute sound output, press & hold to power on/o

LCD SCREEN DISPLAY

I<<

Radio mode : Press to auto seek down or press & hold for manual seek down USB/SD mode : Press to return to previous song or press & hold to Fast Rewind

EQ : Equalizer IR SENSOR USB PORT RESET MOD/CLK

Press to select mode of media RADIO-USB-SD-AUXIN or press & hold for clock

1/>II

Radio mode : Press & hold to preset stations USB/SD mode : Function as PAUSE/PLAY button

12.

13.

14.

15.

16.

17.

18.

19.

2/INT

Radio mode : Press & hold to preset stations USB/SD mode : Function as introduction, playback each song for 10seconds

3/RPT

Radio mode : Press & hold to preset stations USB/SD mode : Function as repeat, repeat current song playback

4/RDM

Radio mode : Press & hold to preset stations USB/SD mode : Function as random, playback song in shue mode

5/-10

Radio mode : Press & hold to preset stations USB/SD mode : Press to playback previous 10th song or press & hold to return to previous folder

6/+10

Radio mode : Press & hold to preset stations USB/SD mode : Press to skip to 10th song or press & hold to skip to next folder

>>I

Radio mode : Press for auto seek up or press & hold for manual seek up USB/SD mode : Press to skip to next 10th song or press & hold to Fast Forward

SD SLOT AUX-IN PORT

Page 4

STRUCTURE

FEATURE

10.

11.

12.

13.

14.

15.

16.

17.

18.

Select mode of media Power : On / O Select stations band Return to previous / fast rewind Select equalizer Pause / play Introduction / song preview (USB/SD) Repeat song Random / shue play Return to 10th song / previous folder Skip to 10th song / next folder Press & hold to adjust clock setting Volume down Skip to next / fast forward Select Treble/Bass/Fader/Balance Press & hold to search stations Volume up Mute

5 8

6 7

10 9

Media Playback

• MP3/WMA/WAV Playback

• USB 2.0 / SD Playback

• SDHC (Support up to 32GB)

• Front Aux input

• Repeat (Disc/Title)

Accessories

• Remote control

Display

• White Display Key with LED Backlight

• Fixed Panel

Audio

• 4 x 40W Built-in amplier

• RCA Rear Preout

• Auto Equalizer

Tuner

• Menu/ID3 Tag

• 18 FM Preset Station

• Local Seek Tuning

Page 5

OPERATION

General

Power supply : 13.8V DC Load impedance : 4 ohms Max. output power : 4 x 40W Tone control : ±8dB (bas 100Hz, treble 10KHz)

USB

Signal-to-noise ratio : 65dB Separation : 60dB (1KHz) Distortion : 0.1%

Tuner

Range : 87.5 ~ 108MHz IF range : 10.7MHz Usable sensitivity (-30dB) : 15dB Signal-to-noise ratio : 60dB Stereo separation : 30db Frequency response : 50~12000Hz

Page 6

INSTALLATION INSTRUCTION

SAFETY

•

CAUTION

•

When installing amplier, rst connect the device ground connections before connecting the plugs for the line-out jacks. Ground connection of external devices may not be connected to ground of car sound system (housing).

Assign a mounting location that will not obstruct driver in any circumstances. Or cause injuries to drivers and passengers in case emergency brake or accidents.

Ensure all wires are connected properly, and that the unit is functioning well before tting the unit into the mount.

Any unauthorized installation and modication may cause malfunction to the unit. Always use the parts that are included with the units only.

Disconnect the negative terminal of the battery (Refer to vehicle manufacturer’s safety instructions). Be wary to not damage vehicle components when drilling holes.

Make sure you do not damage vehicle components when drilling any holes.

The cross sections of the positive and negative cables must not be less than 1.5 mm2.

Do not connect the vehicle’s plug connectors to the radio!

Your vehicle may dier from the description provided here. Blaupunkt is not liable in case any damage caused by incorrect installation or connection.

Please contact Blaupunkt dealers or vehicle’s manufacturer if information provided here does not t your specic installation requirement.

Supplied mounting hardware

Available as optional accessories

Installation kit

Page 7

INSTALLATION INSTRUCTION

0° - 30°

+/– 10°

Page 8

DISMANTLE INSTRUCTION

4.1.

Page 9

WIRING DIAGRAM

1 3 5 7

A1 : A2 : MUTE A3 : A4 : B+ (YELLOW) A5 : ANT (BLUE) A6 : ILL A7 : ACC (RED) A8 : GND (BLACK)

B1 : REAR RIGHT + B2 : REAR RIGHT B3 : FRONT RIGHT + B4 : FRONT RIGHT B5 : FRONT LEFT + B6 : FRONT LEFT B7 : FRONT LEFT + B8 : REAR LEFT -

RADIO ANTENNA

RCA OUT

WHTE : REAR RIGHT

RED : REAR LEFT

WHITE : FRONT RIGHT RED : FRONT LEFT

•

This unit is desgined for 12V DC negative ground operation system only. Before installating the unit, ensure vehicle is connected to 12V negative ground electrical system

The negative battery terminal must be disconnected before making connections. This will help to prevent device from being damaged by short-circuit.

Ensure to connect the colour coded leads correctly according to the diagram. Incorrect connections may cause unit to malfunction and may damage vehicle’s electrical system.

Ensure to connect the speaker (-) leads to the speaker (-) terminal. Do not connect the left and right channel speaker cables to each other or the vehicle.

Do not block vents or radiator panels. Ensure good ventilation to prevent overheating.

Page 10

TROUBLESHOOTING

SUPPORTED AUDIO FORMAT

Before going through the checklist, check wiring connection. If any of the problem continues after checklist has been made, consult an authorized dealer.

SYMPTOM

No power supply

No sound output

Breaking/skipping

sound

Operating keys failed

to function

Unable to connect to

radio station and

automatic selection is

not functioning

CAUSE

Car ignition turned o

Broken fuse

Low volume

Wiring connection

Installation angle is

more than 30 degree

Defective disc or

dirty disc

Chipset technical error

Antenna cable

connection

Weak signals

FILE FORMAT

MP3 WMA WAV

BIT RATE

32Kbps - 320Kbps 32Kbps - 320Kbps 32Kbps - 320Kbps

SOLUTION

Switch the key position to “ACC”

to turn on ignition.

Replace the fuse.

Adjust volume to desire level.

Check if wire is connected correctly.

Adjust installation angle to less than

30 degree.

Clean the disc or insert new disc.

Press reset button to reset unit.

Connect antenna cable correctly.

Select stations manually.

Page 11

Designed and engineered by Blaupunkt