Blaupunkt CD52 User Manual
Radio / CD
Casablanca CD52
Heidelberg CD52
US version
Operating instructions
http://www.blaupunkt.com
Open here
Ouvrir s.v .p.
Por favor, abrir
Favor abrir
2
ENGLISH
FRANÇAIS
2
4
1
3
5
6
798
10
11
1213141516
ESPAÑOL
PORTUGUÊS
3
CONTROLS
1 button - unlatches the flip/
release panel
2 Volume control
3 Button - switches the radio and
mute function on/off
4 RDS button, to switch the RDS
function on/off (Radio Data System).
5 FM button, to select the FM ra-
dio mode source and select the
FM memory banks
TS, to start the Travelstore function
6 Display (display field)
7 DIS, change display contents
button - indicates the time on
the display
8 MENU button - selects the menu
for basic settings
9
button - opens the flip/release
panel
: Arrow-key block
; OK button - confirms menu en-
tries and starts the scan function
< DEQ button (digital equalizer) -
switches the equalizer on/off
= AUDIO button - adjusts bass,
treble, X-BASS, balance and
fader
> Key block 1 - 6
? AM button, to select the AM ra-
dio mode source and select the
AM memory banks
@ SRC button - selects between
CD, CD changer/Compact Drive
MP3 (if connected) and AUX
sources
4
TABLE OF CONTENTS
Notes and accessories ............ 6
Flip/release panel .................... 7
Switching on/off ...................... 8
Volume adjustment .................. 9
Radio mode ............................ 10
Setting the tuner ............................ 10
Switching to radio mode ................ 11
Switching the RDS function
on/off ............................................ 11
Selecting the waveband /
memory bank................................. 11
Tuning into a station ....................... 11
Setting the sensitivity of station
seek tuning.................................... 11
Storing stations ............................. 12
Storing stations automatically
(Travelstore) .................................. 12
Listening to stored stations ............ 12
Scanning receivable stations
(SCAN) ......................................... 12
Setting the scantime ...................... 12
Programme type (PTY) .................. 13
Optimising radio reception............. 13
Displaying scrolling text ................. 14
Setting the display ......................... 14
CD Mode ................................ 15
Starting CD mode ......................... 15
Selecting a track ........................... 15
Quick track selection ..................... 15
Fast search (audible) ..................... 15
Random play (MIX) ........................ 16
Scanning tracks (SCAN) ............... 16
Repeating a track (REPEAT) .......... 16
Interrupting play (PAUSE).............. 16
Changing the display ..................... 16
Naming CDs ................................. 17
Displaying CD text ......................... 17
Removing a CD ............................. 18
CD changer mode .................. 18
Starting CD changer mode ............ 18
Selecting a CD.............................. 18
Selecting a track ........................... 18
Fast search (audible) ..................... 18
Changing the display ..................... 18
Repeating individual tracks or
whole CDs (REPEAT).................... 19
Random play (MIX) ........................ 19
Scanning all tracks on all CDs
(SCAN) ......................................... 19
Interrupting Play (PAUSE) ............. 19
Naming CDs ................................. 20
CLOCK - Time ........................ 21
Tone and volume balance ...... 22
Equalizer ................................ 23
Notes on adjusting the equalizer .... 23
Switching the equalizer on/off ........ 24
Setting the equalizer ...................... 24
Selecting sound presets ................ 24
Selecting car presets..................... 24
Setting the level indicator............... 25
Setting aid for the equalizer ........... 25
External audio sources .......... 26
Technical data ........................ 26
Installation instructions ........ 101
ENGLISH
FRANÇAIS
ESPAÑOL
PORTUGUÊS
5
NOTES AND ACCESSORIES
Notes and accessories
Thank you for deciding to use a Blaupunkt product. We hope you enjoy using this new piece of equipment.
Please read these operating instructions before using the equipment for
the first time.
The Blaupunkt editors are constantly
working on making the operating instructions clearer and easier to understand. However, if you still have any
questions on how to operate the equipment, please contact your dealer or the
telephone hotline for your country . You
will find the telephone numbers printed
at the back of this booklet.
We provide a manufacturer guarantee
for our products bought within the European Union. You can view the guarantee conditions at www.blaupunkt.de
or ask for them directly at:
Blaupunkt GmbH
Hotline
Robert Bosch Str. 200
D-31 139 Hildesheim
Road safety
Road safety has priority . Only operate your car radio if road and traffic conditions allow. Familiarise yourself with the unit before setting off on
your journey.
You should always be able to hear
police, fire and ambulance sirens in
good time. For this reason, set the
volume of your car radio at a suitable level.
Installation
If you would like to install your car radio
yourself, please read the installation and
connection instructions at the end of the
manual.
Accessories
Please use only Blaupunkt-approved
accessories.
Remote controls
The most important functions of your car
radio can be selected safely and conveniently from the steering wheel using
the remote controls RC 08, RC 10 or
RC 10H (available as an optional extra).
The radio cannot be switched on/off via
remote control.
Amplifiers
All Blaupunkt amplifiers are suitable for
use with the radio.
6
NOTES AND ACCESSORIES
FLIP/RELEASE PANEL
CD changer
The following Blaupunkt CD changers
can be connected to the radio:
CDC A 02, CDC A 08 and IDC A 09.
Compact Drive MP3
As an alternative to a CD changer, you
can connect a Compact Drive MP3 to
access MP3 music tracks. If you connect a Compact Drive MP3, you will first
need to use a computer to store the MP3
music tracks on the Microdrive™ hard
disk inside the Compact Drive MP3.
Then, when the Compact Drive MP3 is
connected to the car radio, you can play
the tracks like normal CD music tracks.
The Compact Drive MP3 is operated in
the same way as a CD changer. Most
of the CD changer functions can also
be used with the Compact Drive MP3.
Amplifier / sub-out
(only Casablanca CD52)
The car radio provides connections for
connecting external amplifiers and a
subwoofer.
We recommend you use well-matched
products from the Blaupunkt or Velocity
product ranges.
Flip/release panel
Theft protection
Your car radio is fitted with a flip/release
panel to guard against theft. Without this
panel, the unit is worthless to the thief.
Protect your unit from theft by taking the
flip/release panel with you every time
you leave the car. Do not leave the panel
behind in the car, even if it is out of sight.
The constructive design of the panel
makes for simple handling.
Note:
● Do not drop the flip/release panel.
● Do not expose the flip/release pan-
el to direct sunshine or other sources of heat.
● Keep the flip/release panel in the
case provided.
● Avoid direct skin contact with the
flip/release panel. Please clean it
when necessary with some white
spirit on a lint-free cloth.
Removing the flip/release panel
1
ENGLISH
FRANÇAIS
ESPAÑOL
PORTUGUÊS
7
FLIP/RELEASE PANEL SWITCHING ON/OFF
➮ Press the button 1.
This unlatches the flip/release panel.
➮ First pull the flip/release panel
straight and then to the left out of
the unit.
● After removing the flip/release pan-
el, the unit switches itself off.
● All the current settings are saved.
● If there is a CD in the unit, it re-
mains there.
Attaching the flip/release panel
➮ Slide the flip/release panel from left
to right into the unit guide.
➮ Press the left side of the panel into
the unit until it slots into place.
Note:
● Do not press against the display
while attaching the flip/release panel.
If the device was still switched on when
you removed the control panel, it will
automatically switch on again with the
last settings activated (i.e. radio, CD, CD
changer/Compact Drive MP3 or AUX)
when the panel is replaced.
Switching on/off
There are various ways of switching the
car radio on and off, as described below.
Switching on/off using the ignition
If the car radio is correctly connected to
the ignition and has not been switched
off using the button 3, it is switched
on/off simultaneously with the ignition.
You can also switch on your car radio
when the vehicle ignition is off.
➮ To do so, press the button 3.
Note:
To protect the vehicle battery, the unit
switches off automatically after one
hour.
Switching on/off using the flip/
release panel
➮ Remove the flip/release panel.
The unit switches itself off.
➮ Replace the flip/release panel once
more.
The car radio is switched on. The last
settings (radio, CD, CD changer/Compact Drive MP3 or AUX) are activated.
Switching on/off using the button
3
➮ To switch the unit on, press the but-
ton 3.
➮ To switch the unit off, hold the but-
ton 3 down for more than two
seconds.
The car radio is now switched off.
8
VOLUME ADJUSTMENT
Volume adjustment
The system volume can be adjusted in
steps from 0 (off) to 66 (maximum).
➮ To raise the system volume, turn
the volume control 2 to the right.
➮ To lower the system volume, turn
the volume control 2 to the left.
Setting the switch-on volume
You can set the volume at which you
wish the car radio to play when switched
on.
➮ Press the MENU button 8.
➮ Press the or button : repeat-
edly until “ON VOLUME” appears
on the display.
➮ Use the buttons : to set the
switch-on volume.
If you select “LAST VOL”, the volume
played before the unit was last switched
off will be reactivated.
Note:
● To protect your hearing, the maxi-
mum switch-on volume under the
“LAST VOL” setting is “38”. If the
volume was higher before the unit
was switched off and “LAST VOL”
has been selected, the volume will
be set at “38” the next time the radio is switched on.
When you have completed setting the
volume,
➮ press the MENU button 8.
Mute setting
This feature enables you to lower the
system volume instantaneously (mute).
➮ Briefly press button 3.
“MUTE” appears on the display.
Telephone Audio/Navigation
Audio
If your car radio is connected to a mobile telephone or a navigation system,
the volume will be muted as soon as
you “pick up” the telephone or the radio
relays voice output from the navigation
system and the conversation or voice
output is heard through the radio's loudspeakers. In order for this to work, the
mobile telephone or navigation system
has to be connected to the car radio as
described in the instructions. For this,
you need adapter cable Blaupunkt no.
7 607 001 503.
To find out which navigation systems are
compatible with your car radio, please
consult your Blaupunkt dealer.
The volume at which telephone conversations and voice output from the navigation system are switched on is adjustable.
➮ Press the MENU button 8.
➮ Press the button : repeatedly
until “TEL/NAVI VOL” appears on
the display .
➮ Use the buttons : to set the
desired volume.
➮ When you have completed the set-
tings, press either the MENU button 8 or OK ;.
ENGLISH
FRANÇAIS
ESPAÑOL
PORTUGUÊS
9
VOLUME ADJUSTMENT RADIO MODE
Note:
You can adjust the volume for telephone
conversations and voice output while
they are being heard by using the volume control 2.
Automatic Sound
(only Casablanca CD52)
This function adjusts the volume of your
car radio automatically to your driving
speed. This requires your device to be
connected as described in the installation guide.
The automatic volume booster can be
set in six stages (0-5).
➮ Press the MENU button 8.
➮ Press the button : until “AUTO
SOUND” appears in the display.
➮ Set the volume adjustment with the
buttons :.
➮ When the setting process is com-
plete, press the MENU button 8
or OK ;.
Note:
The right speed-adjusted volume setting depends on noise levels inside your
car. Try various values (0-5) until you
find the best setting.
Radio mode
This unit is equipped with an RDS radio
receiver. Many of the receivable FM stations transmit a signal that not only carries the programme but also additional
information such as the station name
and programme type (PTY).
The station name appears in the display as soon as the radio is able to receive it and the RDS function is activated. You can optionally display the programme type. For further details, please
read the section entitled “Programme
type (PTY)”.
Setting the tuner
To ensure that the tuner works properly, the device must be configured for
your region. You can choose between
Europe (EUROPE) and the USA (N
AMERICA). By default, the tuner is set
to the region in which the device was
sold. If you experience problems with
radio reception, please check this setting.
These operating instructions refer to the
“N AMERICA” setting.
➮ Press the MENU button 8.
➮ Keep pressing the button :
until “TUNER AREA” appears in
the display .
➮ Press the or button : for
longer than two seconds to switch
between “EUROPE” and “N
AMERICA”.
➮ Press the MENU button 8 or OK
;.
10
RADIO MODE
Switching to radio mode
If you are in CD, CD changer/Compact
Drive MP3 or AUX mode,
➮ press the FM TS button 5 for FM
radio mode.
or
➮ press the AM button ? for AM ra-
dio mode.
Switching the RDS function on/
off
➮ To use the RDS functions, press
the RDS button 4.
The RDS function is active when RDS
lights up in the display with a symbol.
Selecting the waveband /
memory bank
This unit can receive programmes
broadcast over the FM and AM wavebands. There are three memory banks
(FM1, FM2 and FMT) for the FM waveband and two memory banks (AM and
AMT) for the AM waveband.
Six stations can be stored in each memory bank.
To switch between the FM memory
banks,
➮ briefly press the FM TS button 5
repeatedly until the required memory bank appears in the display .
To switch between the AM memory
banks,
➮ briefly press the AM button ? re-
peatedly until the required memory
bank appears in the display.
Tuning into a station
There are various ways of tuning into a
station.
Automatic seek tuning
➮ Press the or button :.
The unit tunes into the next receivable
station.
Tuning into stations manually
You can also tune into stations manually .
➮ Press the or button :.
Note:
You can only tune into stations manually on the FM waveband if the RDS and
PTY functions are deactivated.
Setting the sensitivity of station
seek tuning
You can choose whether to only tune
into stations with a strong reception or
to also tune into those with a weak reception.
➮ Press the MENU button 8.
➮ Keep pressing the button : un-
til “SENS” appears in the display.
➮ Press the button :.
The display shows the currently set sensitivity level. “SENS 6” means that the
tuner is set to the highest sensitivity
setting. “SENS 1” is the lowest setting.
➮ Set the required sensitivity using
the or button :.
ENGLISH
FRANÇAIS
ESPAÑOL
PORTUGUÊS
11
Loading...