Blaupunkt BPV755 Owner's Manual

Service numbers / Numéros du service après-vente / Números de servicio / Número de serviço

Country: Phone: Fax: WWW:

Germany (D) 0180-5000225 05121-49 4002 http://www.blaupunkt.com

Austria (A) 01-610 390 01-610 393 91 Belgium (B) 02-525 5454 02-525 5263 Denmark (DK) 44 898 360 44-898 644 Finland (FIN) 09-435 991 09-435 99236 France (F) 01-4010 7007 01-4010 7320 Great Britain (GB) 01-89583 8880 01-89583 8394 Greece (GR) 0800-550 6550 01-576 9473 Ireland (IRL) 01-4149400 01-4598830 Italy (I) 02-369 6331 02-369 6464 Luxembourg (L) 40 4078 40 2085 Netherland (NL) 023-565 6348 023-565 6331 Norway (N) 66-817 000 66-817 157 Portugal (P) 01-2185 00144 01-2185 11111 Spain (E) 902-120234 916-467952 Sweden (S) 08-7501500 08-7501810 Switzerland (CH) 01-8471644 01-8471650

Czech. Rep. (CZ) 02-6130 0441 02-6130 0514 Hungary (H) 01-333 9575 01-324 8756 Poland (PL) 0800-118922 022-8771260

Turkey (TR) 0212-3350677 0212-3460040

USA (USA) 800-2662528 708-6817188

Brasil (Mercosur) (BR) +55-19 3745 2769 +55-19 3745 2773

Malaysia (Asia Pacific) (MAL) +604-6382 474 +604-6413 640

Radio / CD

BPV755

Operating and installation instructions Notice d’emploi et de montage Instrucciones de manejo e instalación Instruções de serviço e de montagem

http://www.blaupunkt.com

01/03 288F0700

BPV755_Cover 2/5/03, 5:35 PM1

Blaupunkt GmbH

FCC WARNING

Precautions

Handling the Front Panel

This equipment has been tested and found to comply with the limits for a Class B device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with instructions, may cause harmful interference with radio communications. However, there is no guarantee that radio interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to consult the dealer or an experienced radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

Features

• Detachable Flip Down Front Panel

• CD-R/RW available

• Built-in power amplifier (max. output : 50W ✕ 4ch)

• FM/AM PLL Synthesizer tuner

• 30 Station preset memory

• Travel Store / Scan tuning

• Optional IR Remote Controls

• Avoid installing the unit where it would be subject to high temperatures, such as in direct sunlight or a hot air stream from the heater, or where it would be subject to dust, dirt, or excessive vibration.

• Do not turn on the unit if the temperature inside the car is very high. Always cool down the unit before usage. Parking your car in direct sunlight will result in a temperature rise.

• If the unit does not turn on, check the connections first. Then check whether the fuse at the back of the unit is blown.

• Carefully read this manual before using the unit. If you encounter any problems that are not covered in this manual, please consult the dealer where you purchased the unit or the dealer nearest to you.

• This unit has been designed specifically for playback of compact discs bearing the following mark. Other discs cannot be played.

Handling Compact Discs

• Be careful when removing a compact disk after the playback is completed because the disk may be extremely hot.

• Do not use non-conventional discs such as heart-shaped, octangonal discs, etc. The player could be damaged.

• Do not expose compact discs to direct sunlight or any heat source.

• Check all compact discs before playing, and discard cracked, scratched or warped discs.

• Wipe dirty or damp discs outward from the centre with a soft cloth.

• Do not use any solvents such as commercially available cleaners, antistatic spray, or thinner to clean the compact discs.

Attaching the Front Panel

Place hole A of the front panel onto the spindle B on the unit, then lightly push the right side in.

Detaching the Front Panel

Remove the CD from the unit, if any, and turn off the power of the unit.

Press the Release button , then slide the front panel to the left, and gently pull out the right end of the front panel.

Notes

• Do not handle the unit roughly when opening/closing the front panel.

• Do not put any object or use it like a tray when the front panel is open in a lying position.

• Do not put too much force to the operation buttons or the display window as it may cause damage or deform the unit.

• Do not press hard on the front panel when affixing it to the unit. No more than light to moderate pressure should be needed.

• Be sure to use this unit with the front panel closed.

• Be careful not to pinch your finger or hands when opening and closing the front panel.

• Make sure there is no dust or dirt on the electrical terminals on the back of the front panel as this could cause intermittent operation or other malfunctions.

• Connectors on the unit and front panel are vital parts transmitting the signal. Do not touch, push or scratch them.

E-1

ENGLISH

BPV755_Eng 2/5/03, 4:14 PM1

Identification of Controls

Front Panel

156

ENGLISH

AUDIOAUDIO

MUTE/

SENS

VOLVOL

SENS

BPV755BPV755

BAND CD

4 x 50W

RPT

MIX

456

SC/

1 MUTE/SENS button

Mutes the sound. Switches the seek sensitivity between local and distance.

2 RELEASE button

Open the flip down front panel.

3 AUDIO button

Audio control selector; Bass, Treble, Loudness, X-BASS, Balance etc,.

4 Infrared Sensor (behind acrylic facia)

Permits wireless remote control of AM/FM/CD with RC823 credit card style remote.

5 LCD Display window 6 SC/PS button

Scan tuning. Preset scan tuning. Scan play in CD mode.

7 DISP button

Display selector. Display priority setting.Clock adjustment.

8 PWR button

Turns the power of the unit on or off.

9 TUN/TRK dial

Used to tune in to the desired station.

DISPDISP

PWRPWR

TUN

/TRK

9101113

10 PRESET MEMORY button

During radio reception :

- 6; For Preset memory

During CD mode :

4/MIX

; For Mix play

5/RPT

; For Repeat play

11 CD button

Selects the CD mode.

12 BAND button

Selects the AM/FM band & Travel store.

13 VOL dial

; For Pause

Adjusts the volume level and audio control.

14 Eject button

Ejects the CD. Reset the unit.

Remote Control (Optional)

You can operate your receivers basic AM, FM, CD features via an optional IR Remote Control. Optional Credit Card type and Steering Wheel mounted remotes are available.

LCD Display

1 SUB DISPLAY 2 MAIN DISPLAY 3 Equalizer indicator 4 RPT Mode indicator 5 CD running indicator 6 DISC IN indicator 7 R-ch Level Meter 8 X-BASS/BAS indicator 9 L-ch Level Meter 10 STEREO signal indicator

234

810

E-2

BPV755_Eng 2/5/03, 4:14 PM2

General Operations

Turning the power On/Off

Press the

Tip

When you turn on the unit, “HELLO” will be displayed then “WELCOME” will momentarily be displayed before actual

power on. When you turn off the unit, “SEE YOU” will be displayed then “GOOD-BYE” will momentarily be displayed before actual power off. You can edit these messages. (See “Turn on/off message edit”).

PWR

to turn the unit On or Off.

Volume Control

Rotate the VOL dial to adjust the volume.

Volume up

Volume down

Muting the sound

MUTE / SENS

Press To restore the previous volume level, press Mute level can be adjustable. (See “

Characteristics

VOLVOL

”)

MUTE / SENS

again.

Adjusting the Sound

Setting the Clock

The clock uses a 12-hour display system.

1. Turn the ignition key to the ON position.

2. Press the

3. Repeatedly press the

4. Use the following buttons and dial to set the clock. (The blink-

ing section can be adjusted.)

5. Press the

ting mode.

Ignition-off Clock Recall

The display will illuminate showing the time and then automatically shut off after 5 seconds.

Press the sition.

PWR

to turn on the unit.

DISP

to display “CLK ADJ.

SC/PS

: To switch Hour/Minute blink

VOLVOL

: Adjust the Hour and minute

DISP

momentarily to complete the Clock set-

DISP

while the ignition switch is in the “ OFF ” po-

Adjusting the Sound Characteristics

1. Each time you press the

justment mode as table below. After pressing the TRK dial or

2. Rotate the VOL dial to adjust the selected item.

Use the following tables as a guide for adjusting the settings in each mode. Adjust within 5 seconds after selecting the item. After 5 seconds, the unit returns to previous indication.

bAS

B 0 (BASS) B –5~

TRE

T 0 (TREBLE) T –5~

LOUD LOUD

bAS

X-BASS X-BASS

bAL

B 0 (BALANCE) B L9 ~

FAd

F 0 (FADER) F R9 ~

LMt

LEVEL 0~

MUt

LEVEL 0~

DISP

AUDIO

to select the desired ad-

AUDIO

, you can also select with TUN/

VOLVOL

Adjustment Range

B 0

~B +5

T 0

~T +5

OFF

– LOUD ON

~ X-BASS 4

B 0

~B R9

F 0

~F F9

~80

•A italicized letter is an initial value.

ENGLISH

BPV755_Eng 2/5/03, 4:14 PM3

E-3

Tips

• EQ disp *

Displays the current setting of equalizer curve, if the equalizer has been set. (See “

Setting the equalizer

bAS

•

X-BASS

For enhanced bass centered @ 72 Hz, Blaupunkt’s X-BASS

ENGLISH

function can be set for either each band and CD mode. Reduce X-BASS level if your combination of speakers and add on amplifires sound distorted at the preferred sound level.

LMt

•

LEVEL (Limit volume)

Adjust the volume at the time of power on. You can adjust with the actual sound.

MUt

•

LEVEL (Mute level)

You can adjust the mute level with the actual sound.

• Settings for BASS, TREBLE, LOUDNESS and X-BASS can be made to each of the following modes independently: FM/AM/CD

”)

Setting the equalizer

You can select an equalizer curve for 4 music types (Rock, Pop, Classic, Jazz).

Selecting the equalizer curve

1. Press the

2. Press the preset button

equalizer curve. “

Adjusting the equalizer curve

You can store and adjust the equalizer settings for frequency and level.

1. Press the

2. Adjust the desired sound characteristics with BAS/TRE/

LOUD/X-BASS.

3. Press the

the equalizer curve.

Cancelling the equalizer curve

1. Press the

2. Press the

blinking to cancel the equalizer curve. The “EQ OFF” will blinking for few seconds.

AUDIO

to select the BAS/TRE adjustment mode.

to select the desired

” will light on the display window.

•

4/MIX

5/RPT

ROCK

POP

CLASSIC

JAZZ

USER 1

USER 2

AUDIO

to select the BAS/TRE adjustment mode.

5/RPT

for more than 2 seconds to store

USER 1

USER 2

AUDIO

to display the current equalizer curve.

MUTE / SENS

while the name of equalizer curve

Setting the sound stage

You can select/adjust the position of sound stage to best serve a particular seat.

Selecting the sound stage

1. Press the

2. Press the preset button

sound stage as follows.

Adjusting the sound stage

1. Press the

2. Adjust the desired sound stage.

3. Press the desired preset button

2 seconds to store the desired sound stage.

AUDIO

to select the BAL/FAD adjustment mode.

POS 1 (For the left seat) B R2 F R4

•

POS 2 (For the front seat) B 0 F R4

•

POS 3 (For the right seat) B L2 F R4

•

4/MIX

POS 4 (For the rear seat) B 0 F F4

•

5/RPT

POS 5 (For all the seat) B 0 F 0

•

POS 6 (For all the seat) B 0 F 0

•

AUDIO

to select the BAL/FAD adjustment mode.

to select the desired

for more than

E-4

BPV755_Eng 2/5/03, 4:14 PM4

Adjusting the Display Items

1. Press the

2. Repeatedly press the

ment mode as table below. After pressing the TRK dial or

3. Rotate the VOL dial to adjust the selected item.

Use the following tables as a guide for adjusting the settings in each mode. Adjust within 5 seconds after selecting the item. After 5 seconds, the unit returns to previous indication.

ST-CALL (See page 8)

MAIN DISP (See right column)

SUB DISP

D-SPEED

D-TYPE

L SENS 0 /

MESG

CLK ADJ (See page 3)

DEMO ON

AREA SET *

DISP

to indicates the Clock temporaliry.

DISP

to select the desired adjust-

DISP

AUDIO

, you can also select with TUN/

VOLVOL

Adjustment Range

MODE

/ CLOCK

FAST

/ SLOW

PAUSE

/ ROLLING

/ 2

MESG ON

DEMO ON

USA

/ MESG OFF

/ DEMO OFF

/ EURO

•A italicized letter is an initial value.

Tips

• ST-CALL (Radio mode only)

You can search for the memorized FM & AM station names. (See page 8)

• MAIN DISP

You can adjust with which priority items are to be displayed in the Main display. Display priority can be set for the following items in each mode.

Radio

FREQ : Frequency indication. (Initial value) CLOCK : Clock indication. ST-NAME : Memorized station name.

SCROLL : Scrolls MUSIC, ALBUM and ARTIST. (Ini-

CLOCK : Clock indication. TRK/TIME : Track No,/Elapsed time. MUSIC : Music title. ALBUM : Album name. ARTIST : Artist name.

The items supported for display priority for each media are as shown in the table below. When an item that is not supported is selected, “NO NAME” is displayed, following which TRK/TIME is displayed.

DISP Priority

SCROLL

TRK/TIME

SONG

ALBUM ✕

ARTIST ✕

Media

tial value)

✕✕

TEXT

• SUB DISP

You can adjust with which priority items are to be displayed in the Sub display. Display priority can be set for the following 2 items ;

MODE : Mode indication (FM/AM/CD etc,.). CLOCK : Clock indication.

• D-SPEED (Display speed)

The scroll speed of the display indication can be switched.

FAST : Fast. SLOW : Slow.

• D-TYPE (Display type)

The scroll type of the display indication can be switched.

PAUSE : Scrolls across the display with pause. ROLLING : Scrolls across the display.

• L-SENS (Level sens)

The sensitivity of the level meter display can be switched.

0 : Off. 1 : Lo (Normal sensitivity). 2 : Hi (High sensitivity).

• MESG (Message)

Turn on/off message can be switched.

MESG ON : A message is displayed when power on/

MESG OFF : No message is diplayed.

• CLK ADJ

Adjust the clock. (See page 3)

• DEMO

The demonstration of each function is repeatedly shown on the display screen. The demonstration starts about few seconds after power off.

DEMO ON : The demonstration is displayed after

DEMO OFF : The demonstration is not displayed after

• AREA SET *

This unit is supplied pre-set at the factory for reception of North American radio stations. Use in other areas of the world may require different channel spacing. Rotate the VOL dial to select the desired area, then press

SC/PS

the

USA : For North America. EURO : For Europe.

off.

power off.

ENGLISH

BPV755_Eng 2/5/03, 4:14 PM5

E-5

Turn on/off message edit

You can edit the turn on/off message and store it in memory. Following four messages can be edit with 8 characters each.

Turn-on message

• HELLO (MESG 1) / WELCOME (MESG 2)

ENGLISH

Turn-off message

• SEE YOU (MESG 3) / GOOD-BYE (MESG 4)

1. Repeatedly press the

the display window.

2. Press the

SC/PS

DISP

to display the “MESG ON” on

to flash the “HELLO”.

3. Rotate the VOL dial to select the desired message you

want to edit.

HELLO ➜ WELCOME ➜ SEE YOU ➜ GOOD- BYE

4. Press the

SC/PS

A. Rotate the VOL dial in a clockwise direction to select

the desired characters. (A➜ B ➜ C➜ ...Z➜ ➜0➜1➜2➜ 3...9➜“ ”Space )

B. Rotate the TUN/TRK dial to move the flashing cur-

sor.

C. Repeat steps A. and B. to complete entering the en-

tire message 8 characters max.

, then enter the character.

< ➜ > ➜ ∗ ➜ + ➜

➜ − ➜ ′ ➜ /

′

Tips

• To erase /correct a message, press the 2 seconds to clear the character and re-enter.

• If you make no button input or dial operation in 20 seconds, the message edit mode will turn off automatically.

• Make sure the “MESG” will be “ON” .

• When entering a name, pressing the following buttons af-

fects the display of characters as follows.

: Changes to inputting letters. (Starts with “A”.)

: Changes to inputting numbers. (Starts with “0”.)

: Changes to inputting characters. (Starts with “<”.)

: Enters a space (blank).

5. Press the

The new message flashes.

SC/PS

to store the message.

6. To return to the normal radio reception, Press

DISP

for more than

DISP

Erasing the turn on/off message

You can erase the turn on/off message if so desired.

1. Repeatedly press the

on the display window.

2. Press the

desired message you want to erase.

3. Press the

seconds.

SC/PS

4. To return to the normal radio reception, Press

Repeat steps 2. and 3. if you want to erase other message.

DISP

to display the “MESG ON”

, then rotate the VOL dial to select the

, then press the

DISP

for more than 2

DISP

E-6

BPV755_Eng 2/5/03, 4:15 PM6

Radio Reception

Seek Tuning

1. Press the

FM 1 ➜ FM 2 ➜ FM 3 ➜ AM 1 ➜ AM 2 (FM 3 & AM 2 are Travel Store bands.)

BAND

to select the desired AM or FM band.

2. Rotate the TUN/TRK dial to tune in stations. Tuning au-

tomatically stops at a broadcasting frequency. When tuned in to FM stereo broadcasting stations, the “

” stereo signal indicator will appear on the display

window.

: Lower Frequency.

TUN

/TRK

Higher Frequency.

Manual Tuning

1. Press the

2. Rotate and hold the TUN/TRK dial for more than 0.5 sec-

ond to activate the manual tuning mode. “ MA Rotate again to tune in to stations. After 4 seconds of completing Manual Tuning, the tuning control will revert to the Seek Tuning mode.

BAND

to select the desired AM or FM band.

n ” indicator will appear on the sub display.

Scan Tuning

1. Press the

2. Hold the

The unit will scan the selected band for stations and the unit will stop at each station for 10 seconds, before continuing to the next station. Press the this on the selected frequency.

BAND

to select the desired AM or FM band.

SC/PS

pressed for less than 2 seconds.

SC/PS

again to stop Scan Tuning and remain

Preset Scan Tuning

1. Press the

2. Hold the

The unit will scan preset memory for the 12 stations from the AM 1/AM 2 band or the 18 stations from the FM 1/FM 2/FM 3 bands. The unit will stop at each preset station for 10 seconds, before continuing to the next preset station. Press the remain this on the selected frequency.

BAND

to select the desired AM or FM band.

SC/PS

pressed for more than 2 seconds.

SC/PS

again to stop Preset Scan Tuning and

Memorizing Stations Automatically (Travel Store)

1. Press the

2. Hold the

Up to 6 stations will be automatically stored in preset memory for the selected band. If the radio is in FM 1 or FM 2, it switches to FM 3. If the radio is in AM 1, it switches to AM 2.

Note

This function is available for FM 3 and AM 2.

BAND

to select the desired AM or FM band.

BAND

pressed for longer than 2 seconds.

Memorizing Only the Desired Stations

You can store up to 6 stations on each band (18 for FM 1, FM 2 and FM 3, 12 for AM 1 and AM 2) in the order of your choice.

1. Press the

BAND

to select the desired band.

2. Rotate the TUN/TRK dial to tune in stations.

3. Press and hold the desired preset memory button

for about 2 seconds until the frequency indicator flashes twice. The number of the pressed preset memory button appears on the display window.

Note

If when you store another station on the same preset number button, the previously stored station is replaced with new one.

Receiving the Memorized Stations

1. Press the

2. Press the

BAND

to select the desired AM or FM band.

- 6 momentarily.

Local/Distant (LO/DX) Selection

This feature is used to select the signal strength at which the radio will stop during Seek Tuning.

Press the Local setting and only strong (local) stations will be received. The “ SENS LO ” appears on the display window. Pressing for more than 2 seconds again will select the Distant setting and the radio will stop at a wider range of signals, including weaker more distant stations. The “ SENS DX ” appears on the display window. DX is the suggested default setting.

MUTE / SENS

for more than 2 seconds to select the

ENGLISH

BPV755_Eng 2/5/03, 4:15 PM7

E-7

Storing the station names

You can assign a name to each radio station and store it in memory. As much as 30 station names can be stored composed with 8 characters each.

Storing the station names

ENGLISH

1. Tune in a station whose name you want to store.

2. Press the

The “EDIT” will light then the “_ _ _ _ _ _ _ _” on the display window. The first “ _ ” flashes.

DISP

for more than 2 seconds.

3. Enter the characters.

A. Rotate the VOL dial in a clockwise direction to select

the desired characters. (A➜ B ➜ C ➜ ...Z➜ ➜0➜1➜2➜3...9➜“ ”Space )

B. Rotate the TUN/TRK dial to move the flashing cur-

sor.

C. Repeat steps A. and B. to complete entering the en-

tire name 8 characters max.

Tips

• To erase/correct a name, press the seconds to clear the character and re-enter.

• If you try to store more than 30 station names, “**FULL**” will be displayed.

• When entering a name, pressing the following buttons affects the display of characters as follows.

: Changes to inputting letters. (Starts with “A”.)

: Changes to inputting numbers. (Starts with “0”.)

: Changes to inputting characters. (Starts with “<”.)

: Enters a space (blank).

4. Press the

The station name flashes.

SC/PS

5. To return to the normal radio reception, Press

< ➜ > ➜ ∗ ➜ + ➜

DISP

for more than 2

to store the station name.

➜ − ➜ ′ ➜ /

′

DISP

Direct Access to Memorized Stations via STCALL

You can search for the memorized AM & FM station names in the memory.

1. Press the

window.

DISP

to display the “ST-CALL” on the display

2. Rotate the VOL dial to select the desired station name.

3. Press the

Erasing the station names

1. Tune in any station and press the

seconds.

2. Press the

The station name or “ _ _ _ _ _ _ _ _ ” flashing.

3. Rotate the VOL dial to select the name of the station that

you want to erase. To erase all the names of the stations, display “ ALL DEL ”.

4. Press the

seconds. Repeat steps 3. and 4. if you want to erase other names.

SC/PS

to tune in the desired station.

SC/PS

, then press the

DISP

5. To return to the normal radio reception, Press

for more than 2

DISP

E-8

BPV755_Eng 2/5/03, 4:15 PM8

CD Operations

Playing the CD player

Loading Discs

1. Press the Release button and insert the disc into the

CD insertion slot with the labeled side facing up.

2. Close the front panel.

Playback begins automatically.

Labeled side up

NEVER Insert a 3-inch CD!

This unit is designed for playback of standard 5-inch CD’s only. Do not attempt to use 3-inch CD singles in this unit, either with or without an adaptor, as damage to the player and/or disc may occur.

Listening to a disc that is already loaded

Press the CD to select the CD mode. Playback begins automatically.

Pausing Playback

Press the To resume playback, press the

Stopping Playback

Press the 3 or AM 1, AM 2).

BAND

to select the radio reception (FM 1,FM 2, FM

again.

Ejecting Discs

Press the to eject the disc located behind flip-down front panel.

Notes

• The unit will turn on automatically when a CD is inserted if the ignition switch is ‘‘ON’’.

• When the disc is ejected from the CD slot, remove it within 10 seconds; otherwise, the disc will be reloaded automatically.

Track Search

Rotate the TUN/TRK dial during CD mode. Track numbers appear in the display window.

: Playback starts from the beginning of the

current track. Rotate again to play the pre-

TUN

vious track.

/TRK

: Playback starts from the beginning of the

next track.

Cue / Review

Rotate and hold the TUN/TRK dial. Release when you have found the desired point.

: To search backward.

TUN

/TRK

: To search forward.

Scan Play

Press the The ‘‘ SCAN ON ’’ appears in the display window. This will play the first 10 seconds of all the tracks on the disc. Press the

SC/PS

during CD mode.

SC/PS

again to cancel this feature.

Repeat Play

Press the The ‘‘ RPT ON ’’ and “ RPT ” indicator appears in the display window and the current track is played repeatedly. Press the

5/RPT

during CD mode.

5/RPT

again to cancel this feature.

Mix Play

Press the The ‘‘ MIX ON ’’ appears in the display window. All the tracks on the current disc are played in random order. Press the

4/MIX

during CD mode.

4/MIX

again to cancel this feature.

ENGLISH

BPV755_Eng 2/5/03, 4:15 PM9

E-9

Installations

Supplied Mounting Hardware

ENGLISH

Sleeve

Bushing, Locking Mounting Strap Release Screw screw and Screw Keys

Precautions

• Be sure to detach the front panel before you start installing the unit.

• Choose the mounting location carefully so that the unit will not interfere with the normal driving operations of the driver.

• Use only the supplied mounting hardware for a safe and secure installation.

• When mounting the unit in a car, keep the unit as level as possible. If the unit must be mounted at an angle, due to the design of the vehicle, make sure that the unit does not tilt upward by more than 30°.

Mounting Example

Installation in the dashboard.

1. Install the sleeve in the dashboard.

2. Select and bend the appropriate tabs to hold the sleeve

firmly in place.

Mounting Strap Use

3. Attaching the Mounting Strap to the underside of the

dash board, using screw. Attach the back of the unit to the Mounting Strap using the support stem bolt and hardware.

Fire wall

Removal trim ring (Supplied)

Bushing Use

3. As shown in the figure below, securely fasten the

screw, which has been inserted into the bushing to the rear of the set.

Fire wall

The distance to the fire wall varies due to the type of the car. Be sure to secure the unit by properly inserting the bushing.

Removal trim ring (Supplied)

Caution

Insufficient fastening of the screw may cause some CD’s to skip.

* Warning

Failure to properly install the Mounting Strap or rear support Bushing is a major cause of CD skipping. Without these securing devices, the chassis of the CD receiver is able to move up & down whenever the road has imperfections and CD skipping results.

E-10

BPV755_Eng 2/5/03, 4:15 PM10

Note

Some Japanese/Asian vehicles such as TOYOTA & NISSAN do not require use of the sleeve and trim ring assembly. To secure the replacement radio use the O.E.M. brackets and mounting screws. These brackets will align with the threaded screw holes found on each side of the new radio.

Connections

Warning

• To prevent short circuit, remove the key from the ignition

and disconnect the battery’s (-) terminal.

• This unit is designed for negative ground 12 V DC opera-

tion only. You can not use it for 24 V or other types of car batteries.

Connection procedure

Caution

• DO NOT connect any speaker wires to the metal body or chassis of the vehicle.

• DO NOT connect the speaker common (-) wires to each other.

• Connect each speaker wire directly to each speaker terminal.

• All speaker common (-) wires must remain floating. ie. No common connections or connection to vehicle grd.

• Connect each pair of speaker leads only to a single speaker (or speaker system) that has an impedance of least 4 ohms, as well as 50-watt power-handling capability.

• Do not connect speaker leads to any inputs on external amplifiers. This will cause damage to the internal amplifier of this unit.

1 Make sure the car’s ignition key has been removed. 2 Disconnect the negative(-) terminal of the car’s bat-

tery.

3 Connect the wiring harness wires in the following

order : Ground wire (Black), +12V Constant Power Supply (Yellow), +12V Accessory/Switched (Red) and Power Antenna/Amplifier Turn On (Blue), and tape each so they do not come in contact with each other.

4 Connect the speaker wires of the wiring harness. 5 Connect the car’s antenna terminal to the antenna

socket of the unit.

6 Connect the detachable wire harness to the unit. 7 Reconnect the negative(-) terminal of the car’s bat-

tery.

8 Start the car’s engine. 9 Make sure the unit operates properly.

Connection procedure

Preamp Out/Line Out Connections

• Since this unit has Line Level Outputs, you can use an amplifier to upgrade your vehicle stereo system.

RCA Line-out Jacks

White (Left)

Red (Right)

RCA Line-out Jacks (For Rear Speakers)

• Connect a patch cable (not supplied) from the White (left rear channel) and Red (right rear channel) RCA line output jacks of the unit to the line input terminals of the external amplifier.

External Amplifier

Rear Speaker

E-11

ENGLISH

BPV755_Eng 2/5/03, 4:15 PM11

Maintenance

Replacing the Fuse

If the fuse is blown, check the power connection first and then replace the fuse. If the fuse blows again under normal conditions, the unit may be defective.

ENGLISH

Back of the unit

Warning

Use only a fuse with the specified amperage (10 A). Use of another type of fuse can result in a fire or unit damage.

Cleaning the Connectors

If the connectors of the unit and the front panel are contaminated, malfunctions may occur. Detach the front panel and clean the connectors with an alcohol dampened cotton swab as shown below.

Main unit Back of the front panel

Returning to the Initial Settings

When the Eject button is pressed for more than 10 seconds, the microcomputer of the unit returns to the initial settings. If the display window is not properly shown or the unit malfunctions, press the Eject button for more than 10 seconds.

Removing the Unit

Use the supplied release keys when you need to remove the unit from the car. Insert them into the unit as shown below. This will unlock the unit from the sleeve, allowing for removal of the unit.

Note

• Handle the release keys carefully to avoid injuring your fin-

gers.

• Keep the release keys in a safe place for future use.

E-12

BPV755_Eng 2/5/03, 4:15 PM12

Troubleshooting Guide

Specifications

The following check will assist in the correction of most problems which you may encounter with your unit. Before going through the check list below, refer back to the connection and operating procedures.

General

Trouble

• Memorized stations and correct time are erased.

• The fuse has blown.

• Radio works when the igni-

tion key is the ON, ACC and OFF positions.

• No power is being supplied to the unit.

• The power is continuously supplied to the unit.

Cause/Solution

Leads are not matched correctly with the car’s accessory power connector.

Check wiring for short circuits.

The car doesn't have an ACC position.

Radio reception

Trouble

Preset stations are not receivable.

Seek tuning is not possible

Travel Store feature does not complete storing of six stations.

Also make sure that antenna is connected, extended and dry inside.

If the above mentioned solutions do not help to improve the situation, consult your nearest Blaupunkt dealer or in the United States call 1-800-266-2528 for technical assistance, parts and service. Call 1-800-950-2528 for dealer referral or to request product brochure.

Cause/Solution

The broadcast signal is too weak.

The broadcast signal is too weak. → Use manual tuning.

Not enough broadcast frequencies are receivable.

CD Player Troubleshooting

When problems occur with CD playback, an error message appears in the display window. Refer to the table below to identify the problem, then take the suggested corrective action. If the error persists, contact your nearest Blaupunkt dealer.

Message Possible cause Recommended action

FOCUS ERR

SERVO ERR

MECHA ERR

TOC ERR

DATA TRACK

Dirty disc. Scrached disc. Up-side-down.

Data and focus error.

Mchanical problem.

The disc cannot read properly.

Plays the data track of MIX mode CD or CD-ROM.

Clean the disc. Replace the disc. Check the disc.

Eject and re-insert.

Eject and re-insert. Insert anothert disc.

You can not play a CDROM. Skip the music track with TUN/TRK dial.

GENERAL

Dimensions : Approx. 178 mm × 50 mm × 155 mm

Power requirements : 12 volts DC car battery

Output Power : RMS and Peak Power ratings

Output Wiring : Floating-ground type designed for 4

Output Impedance : Compatible with 4-8 ohm speakers. Low - Level Output : 2 V.

(W × H × D) *excluding Front panel.

(negative ground)

(188watts) 200 watts RMS/50 peak × 4 ch

speaker use. RCA low-level outputs (2 channels).

TUNER

Tuning Range : AM : 530 - 1,710 kHz (10 kHz step)

Sensitivity : AM : 20 µV

FM Stereo Separation : 35 dB

FM : 87.5 - 107.9 MHz (200 kHz step)

FM : 9.1 dBf mono sensitivity

CD PLAYER

Frequency Response : 20 - 20,000 Hz S/N Ratio : 98 dB Wow & Flutter : Below the measurable limit

OTHER

Remote Control options : RC-823 Credit Card Remote

ENGLISH

BPV755_Eng 2/5/03, 4:15 PM13

E-13

BPV755_Eng 2/5/03, 4:15 PM14

AVERTISSEMENT DE LA FCC

Précautions

Manipulations de la face avant

Cet appareil a été testé et déclaré conforme aux limitations d’un dispositif de classe B, conformément à la section 15 des règlements de la FCC. Ces limitations ont été conçues afin de fournir une protection adéquate contre toute interférence nuisible lors d’une installation pour une utilisation non professionnelle. Cet appareil génère, utilise et peut émettre de l’énergie de radiofréquence; par conséquent, lors d’une installation et d’une utilisation contraires aux instructions, il risquerait d’interférer de façon nuisible avec les communications radio. Toutefois, il n’est pas garanti qu’aucune interférence radio ne se manifeste dans certains cas. Si cet appareil interfère de façon nuisible avec les réceptions radio ou télévision, ce qui peut être déterminé en allumant et en éteignant l’appareil, il est recommandé de consulter le revendeur ou un technicien radio/TV qualifié pour toute assistance nécessaire. Nous souhaitons vous avertir du fait que toute modification ou tout changement non conforme à ce manuel annulera votre droit d’utiliser cet appareil.

Caractéristiques

• Façade inclinable amovible

• Accepte les CD-R/RW

• Amplificateur de puissance intégré (Sortie max.: 50W

• Syntoniseur / Synthétiseur PLL FM/AM

• Mémoire de présélection de 30 stations

• Mémorisation automatique de voyage / Recherche par balayage

• Télécommandes IR en option

××

× 4 Voies)

××

• Eviter d’exposer l’appareil à de hautes températures, par exemple à la lumière directe du soleil ou au flux d’air chaud d’un chauffage, ou de l’installer dans des endroits poussiéreux, sales ou soumis à des vibrations excessives.

• Ne pas allumer l’appareil si la température à l’intérieur du véhicule est très élevée. Toujours laisser refroidir l’appareil avant utilisation. Si vous garez votre voiture en plein soleil, la température intérieure augmentera.

• Si l’appareil ne se met pas en marche, vérifier en premier les connexions. Vérifier ensuite que le fusible situé à l’arrière de l’appareil n’a pas sauté.

• Lire soigneusement cette notice avant d’utiliser l’appareil. Si vous rencontrez des problèmes autres que ceux qui y sont expliqués, veuillez consulter votre revendeur ou le revendeur le plus proche.

• Le présent appareil a été conçu tout spécialement pour la lecture des disques compacts qui portent la marque suivante. Il ne permet pas d’écouter d’autres disques.

Manipulation des disques compacts

• Faire attention lors du retrait d’un disque compact après sa lecture car il se peut qu’il soit extrêmement chaud.

• Ne jamais utiliser de disques non traditionnels, comme des disques en forme de cœur, des disques octogonaux, etc. Ils pourraient endommager le lecteur.

• Ne pas laisser les disques compacts en plein soleil ou les exposer à une source de chaleur.

• Vérifier chaque disque compact avant d’en effectuer la lecture et jeter les disques fêlés, rayés ou gondolés.

• Nettoyer les disques humides ou sales avec un chiffon doux en décrivant un mouvement du centre vers l’extérieur.

• Ne pas utiliser de solvants, notamment les produits de nettoyage disponibles dans le commerce, de vaporisateurs antistatiques ou de dissolvants pour nettoyer les disques compacts.

Fixation de la face avant

Placer l’orifice A de la façade sur l’axe B de l’appareil, puis appuyer légèrement sur le côté droit pour l’enfoncer.

Retrait de la face avant

Retirer le CD du lecteur, le cas échéant, et mettre l’appareil hors tension. Appuyer sur la touche de dégagement çade vers la gauche et tirer délicatement sur le bord droit de la façade.

Remarques

• N’agissez pas brutalement à l’ouverture/ fermeture de la façade.

• Ne placez pas d’objet sur la façade ouverte en position horizontale et ne l’utilisez pas comme plateau.

• N’appuyez pas trop fort sur les touches de fonctionnement ou sur l’écran d’affichage, cela pourrait endommager ou déformer l’appareil.

• N’appuyez pas trop fort sur la façade lorsque vous l’installez. Une pression légère ou modérée est suffisante.

• Bien utiliser l’appareil avec la façade fermée.

• Faites attention de ne pas vous pincer les doigts ou les mains lors de l’ouverture ou de la fermeture de la façade amovible.

• Vérifiez s’il n’y a pas de saletés ou de poussières sur les contacts électriques situés à l’arrière de la façade car cela pourrait provoquer un fonctionnement erratique de l’appareil ou d’autres problèmes.

• Les connecteurs de l’appareil et de la façade sont des parties vitales transmettant le signal. Evitez de les toucher, de les enfoncer ou de les griffer.

, puis glisser la fa-

F-1

FRANÇAIS

BPV755_Fre 2/5/03, 4:17 PM1

Identification des touches

Face avant

156

AUDIOAUDIO

MUTE/

SENS

VOLVOL

SENS

BPV755BPV755

BAND CD

4 x 50W

RPT

MIX

456

SC/

FRANÇAIS

1 Touche MUTE/SENS (ARRET DU SON/SENSIB.)

Coupe le son. Commute entre la sensibilité de recherche locale et distante.

2 Touche RELEASE

Ouvre la façade inclinable amovible.

3 Touche AUDIO

Sélecteur de commande audio: Bass, Treble, Loudness, X-BASS, Balance, etc.

4 Capteur d'infrarouge (derriere la facade en acrylique)

Permet la telecommande sans fil du combine AM/FM/CD avec la telecommande RC-823 de type carte de credit.

5 Ecran d’affichage à cristaux liquides (LCD) 6 Touche SC/PS (BALAYAGE/BALAYAGE PREREGLE)

Recherche par balayage. Recherche par balayage des stations mémorisées. Lecture par balayage en mode CD/CDC.

7 Touche DISP

Affiche le sélecteur. Réglage de la priorité d'affichage. Ajustement de l’horloge.

8 Touche PWR (MARCHE)

Allume et éteint l’appareil.

9 Bouton rotatif TUN/TRK

Pour localiser la station de votre choix.

DISPDISP

PWRPWR

TUN

/TRK

9101113

Touche PRESET MEMORY (MEMOIRE DE PRESELECTIONS) Durant la réception radio :

- 6; pour la mémoire de présélections

En mode CD :

4/MIX

; pour une lecture aléatoire

5/RPT

; pour répéter la lecture

11 Touche CD

Sélectionne la mode CD.

12 Touche BAND (BANDE)

Sélectionne la bande AM/FM et la mémorisation automatique de voyage.

13 Bouton rotatif VOL (VOLUME)

Règle le niveau du volume et la commande audio.

14 Touche EJECT

; pour effectuer une pause

Ejecter un CD. Réinitialise l’appareil.

Télécommande (option)

Vous pouvez piloter les fonctions de base AM, FM, CD de votre récepteur avec une télécommande IR en option. Il existe des télécommandes de type carte de crédit et des télécommandes à fixation sur le volant.

Affichage à cristaux liquides (LCD)

1 AFFICHAGE AUXILIAIRE 2 Affichage principal 3 Témoin Equalizer 4 Témoin de mode RPT 5 Témoin de marche du CD 6 Témoin DISC IN (DISC inséré) 7 Compteur de niveau du canal droit 8 Témoin X-BASS/BAS 9 Compteur de niveau du canal gauche

234

810

10 Témoin du signal STEREO

F-2

BPV755_Fre 2/5/03, 4:17 PM2

Utilisation générale

Mise sous et hors tension

Appuyez sur la touche hors tension.

Astuce

Quand vous mettez l’appareil sous tension, “HELLO” s’affiche, puis “WELCOME” s’affiche momentanément avant que l’appareil ne soit réellement sous tension. Quand vous mettez l’appareil hors tension, “SEE YOU” s’affiche, puis “GOOD-BYE” s’affiche momentanément avant que l’appareil ne soit réellement hors tension. Vous pouvez modifier ces messages. (Voir “Modification des messages qui apparaissent à la mise sous/hors tension”.)

PWR

pour mettre l’appareil sous ou

Commande de volume

Tourner le bouton rotatif VOL pour régler le volume.

MUTE / SENS

VOLVOL

“Réglage

”.)

Augmentation du volume

Diminution du volume

Arrêt du son

Appuyer sur la touche Pour rétablir le niveau de volume précédent, réappuyer sur la touche Vous pouvez régler le niveau d’arrêt du son *. (Voir

des caractéristiques sonores

MUTE / SENS

Réglage de l’horloge

L’horloge utilise un système d’affichage avec un cycle de 12 heures.

1. Tournez la clé de contact sur la position ON.

SC/PS

PWR

pour mettre l’appareil sous tension.

DISP

jusqu’à ce que

: Pour faire clignoter les heures / mi-

nutes

: Pour régler les heures et les minutes.

DISP

lorsque la clé de contact se trouve

pour vali-

2. Appuyez sur

3. Appuyer de manière répétitive sur

“CLK ADJ” apparaisse.

4. Utiliser les touches et le bouton rotatif suivants pour ré-

gler l’horloge. (La section clignotante est celle qui se rè- gle.)

VOLVOL

5. Appuyer momentanément sur la touche

der le réglage de l’horloge.

Rappel de l’heure lorsque le contact n’est pas mis

Cet affichage s’éclaire pour indiquer l’heure puis il s’éteint automatiquement après 5 secondes.

Appuyer sur la touche sur la position “OFF”.

Réglage des caractéristiques sonores

AUDIO

, vous pouvez

~B +5

~T +5

~B R9

~F F9

~80

AUDIO

, sé-

1. Chaque fois que vous appuyez sur la touche

lectionner le mode de réglage en fonction du tableau cidessous. Après avoir appuyé sur la touche aussi effectuer la sélection avec le bouton rotatif TUN/ TRK ou la touche

2. Tourner le bouton rotatif VOL pour régler l’élément sé-

lectionné. Utiliser les tableaux ci-dessous pour se guider dans les réglages de chaque mode. Effectuer le réglage dans les 5 secondes qui suivent la sélection de l’élément. Cinq secondes plus tard, l’appareil revient à l’indication précédente.

DISP

VOLVOL

Plage de Reglages

bAS

B 0 (BASS) B –5~

TRE

T 0 (TREBLE) T –5~

LOUD LOUD

bAS

X-BASS X-BASS

bAL

B 0 (BALANCE) B L9 ~

FAd

F 0 (FADER) F R9 ~

LMt

LEVEL 0~

MUt

LEVEL 0~

B 0

T 0

OFF

– LOUD ON

~ X-BASS 4

B 0

F 0

•Une lettre en italique représente une valeur initiale.

FRANÇAIS

BPV755_Fre 2/5/03, 4:17 PM3

F-3

+ 39 hidden pages