Black & Decker Pd1800el Instruction Manual

PD1800EL
A B
C D
E F
2
ENGLISH
(Original instructions)
Intended use
Your Black & Decker Dustbuster FlexiTM vacuum cleaner has been designed for dry vacuum cleaning purposes. This appliance is intended for household use only.
Safety instructions
Warning! Read all safety warnings and all
@
instructions. Failure to follow the warnings and instructions listed below may result in electric shock,
re and/or serious injury.
Warning! When using battery-powered appliances,
@
basic safety precautions, including the following,
should always be followed to reduce the risk of re, leaking batteries, personal injury and material dam-
age.
u Read all of this manual carefully before using the appli-
ance.
u The intended use is described in this manual. The use of
any accessory or attachment or the performance of any operation with this appliance other than those recom­mended in this instruction manual may present a risk of
personal injury.
u Retain this manual for future reference.
Using your appliance
u Do not use the appliance to pick up liquids or any materi-
als that could catch re.
u Do not use the appliance near water. u Do not immerse the appliance in water. u Never pull the charger lead to disconnect the charger from
the socket. Keep the charger lead away from heat, oil and sharp edges.
u This appliance is not intended for use by young or inrm
persons without supervision. Children must be supervised to ensure they do not play with the appliance.
After use
u Unplug the charger before cleaning the charger or charg-
ing base.
u When not in use, the appliance should be stored in a dry
place.
u Children should not have access to stored appliances.
Inspection and repairs
u Before use, check the appliance for damaged or defective
parts. Check for breakage of parts, damage to switches and any other conditions that may affect its operation.
u Do not use the appliance if any part is damaged or defec-
tive.
u Have any damaged or defective parts repaired or replaced
by an authorized repair agent.
u Regularly check the charger lead for damage. Replace the
charger if the lead is damaged or defective.
u Never attempt to remove or replace any parts other than
those specied in this manual.
Additional safety instructions - batteries and charg­ers
Batteries
u Never attempt to open for any reason. u Do not expose the battery to water. u Do not expose the battery to heat. u Do not store in locations where the temperature may
exceed 40°C.
u Charge only at ambient temperatures between 10°C and
40°C.
u Charge only using the charger provided with the appli-
ance/tool. Using the wrong charger could result in an
electric shock or overheating of the battery.
u When disposing of batteries, follow the instructions given
in the section "Protecting the environment".
u Do not damage/deform the battery pack either by puncture
or impact, as this may create a risk of injury and re.
u Do not charge damaged batteries. u Under extreme conditions, battery leakage may occur.
When you notice liquid on the batteries carefully wipe the liquid off using a cloth. Avoid skin contact.
u In case of skin or eye contact, follow the instructions
below.
Warning! The battery uid may cause personal injury or
damage to property. In case of skin contact, immediately rinse with water. If redness, pain or irritation occurs seek medical attention. In case of eye contact, rinse immediately with clean water and seek medical attention.
Chargers
Your charger has been designed for a specic voltage. Always
check that the mains voltage corresponds to the voltage on the rating plate. Warning! Never attempt to replace the charger unit with a regular mains plug.
u Use your Black & Decker charger only to charge the bat-
tery in the appliance/tool with which it was supplied. Other batteries could burst, causing personal injury and damage.
u Never attempt to charge nonrechargeable batteries. u If the supply cord is damaged, it must be replaced by the
manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard.
u Do not expose the charger to water. u Do not open the charger. u Do not probe the charger.
3
ENGLISH
(Original instructions)
u The appliance/tool/battery must be placed in a well venti-
lated area when charging.
Safety of others
u This appliance is not intended for use by persons (includ-
ing children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concern­ing the use of the appliance by a person responsible for their safety.
u Children should be supervised to ensure that they do not
play with the appliance.
Residual risks.
Additional residual risks may arise when using the tool which may not be included in the enclosed safety warnings. These risks can arise from misuse, prolonged use etc. Even with the application of the relevant safety regulations and the implementation of safety devices, certain residual risks can not be avoided. These include:
u Injuries caused by touching any rotating/moving
parts.
u Injuries caused when changing any parts, blades or
accessories.
u Injuries caused by prolonged use of a tool. When
using any tool for prolonged periods ensure you take regular breaks.
u Impairment of hearing. u Health hazards caused by breathing dust developed
when using your tool (example:- working with wood, especially oak, beech and MDF.)
Electrical safety
Your charger has been designed for a specic voltage. Always
check that the mains voltage corresponds to the voltage on the rating plate. Never attempt to replace the charger unit with a regular mains plug.
Symbols on the charger
This tool is double insulated; therefore no earth wire
#
is required. Always check that the power supply corresponds to the voltage on the rating plate.
Short circuit proof safety isolating transformer. The
mains supply is electrically separated from the transformer output.
Features
This appliance includes some or all of the following features.
1. On/off power switch
2. Removable hose/handle
3. Locking ring
4. Hose
5. Filter cleaning wheel
6. Transparent door
7. LED charging indicator
8. Door latch
9. 2-in-1 combi nozzle accessory
10. Accessory clip
11. Charging base Fig. A & B
12. Pet brush
13. Crevice tool
Assembly
Mounting accessories (g. A, B & C)
The 2-in-1 combi nozzle (9) has a brush that can be folded forward for dusting and upholstery cleaning. The crevice tool (13) allows for vacuuming in narrow and hard to-reach places. The pet brush head (12) is ideal for picking up pet hairs from cushions and furniture.
u To t an accessory press the accessory clip (10) and slide
the accessory onto the handle (2).
u To remove an accessory, press the accessory clip (10)
and remove the accessory. When not in use, accessories can be stored on the charger base (11). The handle (2) can be removed from the hose (4) allowing the accessories (9, 12 or 13) to be connected directly to the hose cuff (14) when required.
To remove the handle:
u Unclip the handle (2) from the appliance. u Rotate the locking ring (3) anti-clockwise to release the
clips.
u Pull the hose (4) away from the handle (2). u Fit the accessory directly to the hose cuff (15).
To ret the handle:
u Remove the accessory from the hose. u Push the hose (4) into the handle (2). Rotate the locking
ring (3) clockwise until it clicks into place.
The charging base is intended for indoor use only.
$
4
Loading...
+ 8 hidden pages