Black & Decker DV7215EL, DV1015EL, DV1815EL, DV1415EL User Manual

Download

DV7215EL DV1015EL

www.blackanddecker.co.uk

DV1415EL DV1815EL

ENGLISH

(Original instructions)

Intended use

Your Black & Decker Dustbuster® handheld vacuum cleaner has been designed for light dry vacuum cleaning purposes. This appliance is intended for household use only.

Safety instructions

Warning! Read all safety

warnings and all instructions.

the warnings and instructions listed below may result in electric shock, re and/or serious injury.

Failure to follow

Never pull the charger lead to disconnect the charger from the socket. Keep the charger lead away from heat, oil and sharp edges.

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the

Warning!

powered appliances, basic safety precautions, including the following, should always be followed to

When using battery-

hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

reduce the risk of re, leaking batteries, personal injury and material damage.

Read all of this manual carefully before using the appliance.

The intended use is described in this manual. The use of any accessory or attachment or the performance of any operation with this appliance other than those recommended in this instruction manual may present a risk of personal injury.

Retain this manual for future reference.

Inspection and repairs

Before use, check the appliance for damaged or defective parts. Check for breakage of parts, damage to switches and any other conditions that may affect its operation.

Do not use the appliance if any part is damaged or defective.

Have any damaged or defective parts repaired or replaced by an authorized repair agent.

Regularly check the charger lead for damage. Replace the charger if the lead is damaged or defective.

Using your appliance

Do not use the appliance to pick up liquids or any materials that could

Never attempt to remove or replace any parts other than those specied in this manual.

catch re.

Do not use the appliance near water.

Do not immerse the appliance in water.

(Original instructions)

ENGLISH

Additional safety instructions

After use

u Unplug the charger before cleaning the charger. u When not in use, the appliance should be stored in a dry

place.

u Children should not have access to stored appliances.

Residual risks.

Additional residual risks may arise when using the tool which may not be included in the enclosed safety warnings. These risks can arise from misuse, prolonged use etc. Even with the application of the relevant safety regulations and the implementation of safety devices, certain residual risks can not be avoided. These include:

u Injuries caused by touching any rotating/moving parts. u Injuries caused when changing any parts, blades or ac-

cessories.

u Injuries caused by prolonged use of a tool. When using

any tool for prolonged periods ensure you take regular breaks.

u Impairment of hearing. u Health hazards caused by breathing dust developed when

using your tool (example:- working with wood, especially oak, beech and MDF.)

Batteries and chargers

Batteries

u Never attempt to open for any reason. u Do not expose the battery to water. u Do not expose the battery to heat. u Do not store in locations where the temperature may

exceed 40°C.

u Charge only at ambient temperatures between 10°C and

40°C.

u Charge only using the charger provided with the appli-

ance/tool. Using the wrong charger could result in an electric shock or overheating of the battery.

u When disposing of batteries, follow the instructions given

in the section "Protecting the environment".

u Do not damage/deform the battery pack either by puncture

or impact, as this may create a risk of injury and re.

u Do not charge damaged batteries. u Under extreme conditions, battery leakage may occur.

When you notice liquid on the batteries carefully wipe the liquid off using a cloth. Avoid skin contact.

u In case of skin or eye contact, follow the instructions

below.

Warning! The battery uid may cause personal injury or damage to property. In case of skin contact, immediately rinse with water. If redness, pain or irritation occurs seek medical attention. In case of eye contact, rinse immediately with clean water and seek medical attention.

Chargers

Your charger has been designed for a specic voltage. Always check that the mains voltage corresponds to the voltage on the rating plate. Warning! Never attempt to replace the charger unit with a regular mains plug.

u Use your Black & Decker charger only to charge the bat-

tery in the appliance/tool with which it was supplied. Other batteries could burst, causing personal injury and damage.

u Never attempt to charge nonrechargeable batteries. u If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard.

u Do not expose the charger to water. u Do not open the charger. u Do not probe the charger. u The appliance/tool/battery must be placed in a well venti-

lated area when charging.

Electrical safety

Your charger has been designed for a specic voltage. Always check that the mains voltage corresponds to the voltage on the rating plate. Never attempt to replace the charger unit with a regular mains plug.

Symbols on the charger

This tool is double insulated; therefore no earth wire

is required. Always check that the power supply corresponds to the voltage on the rating plate.

Short circuit proof safety isolating transformer. The

mains supply is electrically separated from the transformer output.

The charging base is intended for indoor use only.

ENGLISH

(Original instructions)

Features

This tool includes some or all of the following features.

1. On/off switch

2. Bowl release button

3. Charging indicator

4. Dust bowl

5. Dust collector

6. Charger socket

7. Charger

Assembly

Accessories (g. A & B)

These models may be supplied with some of the following accessories:

u An Integrated brush tool (9) for furniture and stairs. u An Integrated crevice tool (10) for conned spaces.

The integrated brush tool (Fig. A)

u Flip down the brush tool (9) at the end of the dust collec-

tor.

The integrated crevice tool (Fig. B)

u Extend the crevice tool (10) by pulling the crevice tool (10)

until it locks into position.

u Retract the crevice tool (10) by pressing the area (11) and

pushing the crevice tool (10) back into the dust collector (5).

Installation

Wall Mounting (g. C)

The product can be attached to a wall to provide a convenient storage and charging point for the appliance. When xing to a wall, make sure that the xing method is suitable for the wall type and is appropriate to the weight of the appliance.

u Mark the location of the screw holes (within reach of an

electrical outlet for chargeing the vac while it is on the wall bracket).

u Insert the charger cord into the curved slot in the wall

mount bracket leaving approximately 8-9 inches excess.

u Hang the appliance on the wall by placing the opening

on the base of the vac over the hooks in the wall mount bracket.

Use

u Before rst use, the battery must be charged for at least 4

hours.

Charging the battery (Fig. D)

u Make sure that the appliance is switched off. The battery

will not be charged with the on/off switch in the on position.

u Plug the jack plug of the charger (7) into the charging

socket (6) of the appliance.)

u Plug in the charger. Switch on at the mains. The charging

indicator (3) will be lit.

u Leave the appliance to charge for at least 4 hours.

While charging, the charger may become warm. This is normal and does not indicate a problem. The appliance can be left connected to the charger indenitely. The charging indicator (3) will be lit as long as the appliance is connected to the plugged-in charger. Warning! Do not charge the battery at ambient temperatures below 10 °C or above 40 °C.

Switching on and off (g. E)

u To switch the appliance on, slide the on/off switch (1)

forward to position 1.

u To switch the appliance off, slide the on/off switch (1) back

to position 0.

Rotating the dust collector (g. F)

The nozzle can be rotated for better access in tight spots.

u Press the rotation release catch (12). u Rotate the nozzle to the left or right until it clicks into

place.

Optimising the suction force

In order to keep the suction force optimised, the lters must be cleared regularly during use.

Emptying and cleaning the product

Emptying the dust bowl (g. G)

u Press the release latch (13) and pull the dust collector (5)

straight off.

u Empty the contents of the bowl. u To replace the dust collector, place it back onto the handle

until it “clicks” rmly into position.

(Original instructions)

ENGLISH

Removing the dust bowl and lters (g. H & I)

Warning! The lters are re-usable and should be cleaned

regularly.

u Press the release latch (2) and pull the dust bowl (4)

straight off.

u While holding the dust bowl over a bin or sink, pull out the

lter (14) to empty the contents of the bowl.

u To replace the dust bowl, place it back onto the handle

until it “clicks” rmly into position. Warning! Never use the appliance without the lters. Optimum dust collection will only be achieved with clean lters.

Pre-lter (g. J)

The Filter and pre-lter can be separated to allow better cleaning.

u Twist the pre-lter (16) in a clockwise direction and lift

from the lter (15).

Cleaning the dust bowls and lters

u The dust bowls and lters can be washed in warm soapy

water.

u Make sure that the lters and the dust bowl are dry before

re-tting.

Replacing the lters

The lters should be replaced every 6 to 9 months and whenever worn or damaged. Replacement lters are available from your Black & Decker dealer: For models: DV7215EL, DV1015EL, DV1415EL and DV1815EL use lter part number VF110-XJ

Maintenance

Your Black & Decker corded/cordless appliance/tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning. Warning! Before performing any maintenance on corded/ cordless power tools:

u Switch off and unplug the appliance/tool. u Or switch off and remove the battery from the appliance/

tool if the appliance/tool has a separate battery pack.

u Or run the battery down completely if it is integral and then

switch off.

u Unplug the charger before cleaning it. Your charger does

not require any maintenance apart from regular cleaning.

u Regularly clean the ventilation slots in your appliance/tool/

charger using a soft brush or dry cloth.

u Regularly clean the motor housing using a damp cloth. Do

not use any abrasive or solvent-based cleaner.

Protecting the environment

Separate collection. This product must not be

disposed of with normal household waste.

Should you nd one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product available for separate collection.

Separate collection of used products and packaging

allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials.

Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product.

Black & Decker provides a facility for the collection and recycling of Black & Decker products once they have reached the end of their working life. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf.

You can check the location of your nearest authorised repair agent by contacting your local Black & Decker ofce at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com

Battery

If you want to dispose of the product yourself, the

battery must be removed as described below and disposed of in accordance with local regulations.

u Preferably discharge the battery by operating the appli-

ance until the motor stops.

u Press the release button (2) and remove the dust bowl (4). u Remove the seven screws holding the body of the appli-

ance together.

u Lift the housing cover away from the assembly. u Detach all lead connections from the battery pack. u Remove battery pack. u Place the battery in a suitable packaging to ensure that

the terminals cannot be short-circuited.

u Take the battery to your service agent or to a local recy-

cling station.

Once removed, the battery cannot be retted.

ENGLISH

(Original instructions)

Technical data

DV7215EL

(H1)

Voltage V

Battery

Weight kg

Charger

Input voltage V

Output voltage V

Current mA

Approximate

charge time

Weight kg 0.08 0.08

Voltage V

Battery

Weight kg

Charger

Input voltage V

Output voltage V

Current mA

Approximate

charge time

7.2 10.8

Li-Ion Li-Ion

Type

1.10 1.18

S010QV1400040

S010QB1400040

100-240 100-240

14 14

400 400

4 4

DV1415EL

(H1)

14.4 18

Li-Ion Li-Ion

Type

1.23 1.3

S010QV2300040

S010QB2300040

100-240 100-240

23 23

400 400

4 4

DV1015EL

(H1)

S010QV1400040

S010QB1400040

DV1815EL

(H1)

S010QV2300040

S010QB2300040

Guarantee

Black & Decker is condent of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.

If a Black & Decker product becomes defective due to faulty materials, workmanship or lack of conformity, within 24 months from the date of purchase, Black & Decker guarantees to replace defective parts, repair products subjected to fair wear and tear or replace such products to ensure minimum inconvenience to the customer unless:

u The product has been used for trade, professional or hire

purposes;

u The product has been subjected to misuse or neglect; u The product has sustained damage through foreign

objects, substances or accidents;

u Repairs have been attempted by persons other than

authorised repair agents or Black & Decker service staff.

To claim on the guarantee, you will need to submit proof of purchase to the seller or an authorised repair agent. You can check the location of your nearest authorised repair agent by contacting your local Black & Decker ofce at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our aftersales service and contacts are available on the Internet at: www.2helpU.com

Please visit our website www.blackanddecker.co.uk to register your new Black & Decker product and to be kept up to date on new products and special offers. Further information on the Black & Decker brand and our range of products is available at www.blackanddecker.co.uk

Weight kg 0.08 0.08