Black & Decker BDV090AU Instruction Manual

Page 1
8 1
prejudices your statutory rights under the Australian & New Zealand Consumer Law.
If a Baccus Worldwide LLC product becomes defective due to faulty materials, workmanship or lack of conformity, within 24 months from the date of purchase, Baccus Worldwide LLC guarantees to replace defective parts, repair products subjected to fair wear and tear or replace such products to make sure of the minimum inconvenience to the customer unless:
•The product has been used for trade, professional or hire purposes;
•The product has been subjected to misuse or neglect;
•The product has sustained damage through foreign objects, substances or accidents;
•Repairs have been attempted by persons other than Baccus Worldwide LLC service staff.
To claim on this warranty, you will need to submit proof of purchase and return the allegedly defective product to Baccus Worldwide LLC’s local market distributor, at your expense.
Please visit our website www.baccusworldwide.com to register your new Baccus Worldwide LLC product and to be kept up to date on new products and special offers. Further information on the Baccus Worldwide LLC brand and our range of products is available at www.baccusworldwide.com.
Distributed by: Directed Electronics Address: 44 Translink Drive, Keilor Park Victoria Australia 3042 PH: + 61 03 8331 4800 Email: service@directed.com.au
Baccus Worldwide LLC Weena 290, 3012 NJ Rotterdam or Postbus 819, 3000 AV Rotterdam +31(0)10 282 16 11
Cat. # BDV090AU September 2016 RD091216 Printed in China
6 VOLT/12 VOLT BATTERY CHARGER/MAINTAINER
INSTRUCTION MANUAL
BDV090AU_Manual_091216.indd 8-1 9/12/2016 11:43:45 AM
Page 2
32
INSTRUCTION MANUAL
INTENDED USE
Your Black & Decker battery charger is designed to charge any 6V or 12V battery, including Wet, GEL and AGM batteries. This product is intended for household, consumer use only.
SAFETY INSTRUCTIONS
IMPORTANT SPECIFICATION NOTE: B
attery capacity: lead acid type, maximum 6V DC or 12V DC, 60Ah.
Warning!
When using appliances, basic safety precautions, including the following, should always be followed to reduce the risk of fire, leaking batteries, personal injury and material damage.
•Read all of this manual carefully before using the
appliance.
•The intended use is described in this manual.
The use of any accessory or attachment or the performance of any operation with this appliance other than those recommended in this instruction manual may present a risk of personal injury.
•Retain this manual for future reference.
Using your appliance
Always take care when using the appliance.
•This appliance is not intended for use by persons
(including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
•The appliance is not to be used as a toy.
•Use in a dry location only. Do not allow the appliance
to become wet.
•Do not immerse the appliance in water.
•Do not open body casing. There are no user-
serviceable parts inside.
•Do not operate the appliance in explosive
atmospheres, such as in the presence of flammable liquids, gases or dust.
•To reduce the risk of damage to plugs and cords
never pull the cable to remove the plug from a socket outlet.
After use
•When not in use, the appliance should be stored in a
dry, well ventilated place out of the reach of children.
•Children should not have access to stored
appliances.
•When the appliance is stored or transported in a
vehicle it should be placed in the boot or restrained to prevent movement following sudden changes in speed or direction.
•The appliance should be protected from direct
sunlight, heat and moisture.
Inspection and repairs
•Before use, check the appliance for damaged or defective parts. Check for breakage of parts, damage to switches and any other conditions that may affect its operation.
•Do not use the appliance if any part is damaged or defective.
•Have any damaged or defective parts repaired or replaced by the manufacturer.
•Never attempt to remove or replace any parts other than those specified in this manual.
Power cord safety
Warning!
Never alter the mains cord or plug. If it will not fit, have a proper outlet installed by a qualified electrician. Improper connection may result in an electric shock.
The following symbols are marked on the appliance:
This unit is double insulated; therefore no earth wire is required.
Warning!
To reduce the risk of injury, the user must read the instruction manual.
The battery charger is intended for indoor use only.
Electrical safety
Always check that the power supply corresponds to the voltage on the rating plate.
•The supply cord cannot be replaced. If the cord is damaged the appliance should be scrapped.
Specific safety instructions for battery chargers
•Charge only lead-acid type (GEL, WET, AGM) rechargeable batteries.
•Never attempt to charge non-rechargeable batteries.
•Have defective cords replaced immediately.
•Do not expose the battery charger to water.
•Do not open the battery charger.
•Do not probe the battery charger.
•Never allow the red and black clamps or ring
terminals to touch each other or another common metal conductor. This could cause damage to the appliance and/or create a spark/explosion hazard.
BATTERIES
Warning!
Never attempt to charge a frozen battery.
•Under extreme conditions, battery leakage may occur. When you notice liquid on the batteries, carefully wipe the liquid off using a cloth. Avoid skin contact.
31 2
4
7
8
9
65
BDV090AU_Manual_091216.indd 2-3 9/12/2016 11:43:45 AM
Page 3
4 5
•In case of skin or eye contact, follow the instructions below.
Warning!
Battery fluid is a diluted sulphuric acid and may cause personal injury or damage to property. In case of skin contact, immediately rinse with water. If redness, pain or irritation occurs seek medical attention. In case of eye contact, rinse immediately with clean water and seek immediate medical attention.
•When disposing of batteries, follow the instructions given in the section “Protecting the environment”.
•Add distilled water in each cell until the battery acid reaches the level specified by the battery manufacturer. This helps to purge excess gas from the cells. Do not overfill. For a battery without cell caps (maintenance free), carefully follow the manufacturer’s charging instructions.
•Study all the battery manufacturer’s specific precautions, such as removing or not removing cell caps while charging, and the recommended charging rates.
•Make sure that the initial charging rate does not exceed the battery manufacturer’s requirement.
•
Warning!
Risk of explosive gas mixtures. Working in the vicinity of a lead-acid battery is dangerous. Batteries generate explosive gases during normal battery operation. For this reason, it is of utmost importance that each time, before using your battery charger, you read this manual and follow the instructions exactly.
•Use of an attachment not recommended or sold by Black & Decker may result in a risk of fire, electric shock, or injury to persons.
•An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in a risk of fire and electric shock, and will void the warranty.
Dc accessory plug safety
•
Warning!
NEVER connect this unit to a positive
grounded vehicle by the dc accessory plug.
•Make sure that the vehicle’s accessory socket is clean and free of debris before connecting the unit.
•
Warning – risk of fire!
If the vehicle accessory socket fuse opens (blows) when plugging in this battery charger, do not use this battery charger with this vehicle accessory socket.
– Do not repeatedly replace the fuse. – Do not replace the vehicle accessory socket fuse
with one of a higher amperage rating.
– Never attempt to patch the fuse with tin foil or wire.
Any of these actions may cause serious
electrical damage and/or a fire.
Personal safety
Wear complete eye protection and suitable clothing to give protection from contact with battery fluid.
Avoid touching the eyes while working with a battery. Acid, acid particles or corrosion may get into the eyes.
Remove personal metal items such as rings, bracelets, necklaces and watches when working with a lead-acid battery. A lead-acid battery can produce a short circuit current high enough to cause a severe burn.
Be extra cautious to reduce the risk of dropping a metal object onto the battery. This might cause sparks or short-circuit the battery or other electrical part, which can cause an explosion.
FEATURES
1. Fault LED indicator
2. Charging indicators
3. Battery voltage selector switch
4. Mounting holes
5. In-line connector
6. Mains plug
7. Ring terminals
8. Battery clamps
9. Dc accessory plug
SETTING UP THE UNIT
Mounting Instructions
The battery charger is designed to be able to mount to flat surface. The unit has incorporated two mounting holes at the corners of the unit.
Note:
Always disconnect the maintainer at mains power source and at battery terminal when mounting the unit.
TO MOUNT THE UNIT :
1. Make sure the surface is flat and free of obstruction so the unit can rest flat on the surface.
2. Make sure the unit is disconnected from both Mains socket and the battery.
3. Use 8/32 inches (6.35mm) wood screw to mount the unit through the mounting hole.
4. Do not over tighten the screw, it will damage the housing.
Warning!
Do not put the screw through the plastic housing as this will permanently damage the unit and cause a potential electrical hazard.
PREPARATION BEFORE CHARGING
The appliance must only be connected to a 6V or 12V lead-acid battery. Before charging, confirm that the voltage of the battery is eitther 6V or 12V by referring to the label on the battery or from the information available relating to its application e.g. car user manual.
Do not use the appliance for charging dry-cell batteries that are commonly used with home appliances. These
batteries may burst and cause injury to persons and damage to property.
Warning!
Explosive gas may be vented from lead acid batteries when charging. The battery must be placed in a well-ventilated area and you must remove any sources of ignition when conducting charging procedures.
•Never place the battery charger directly above the
battery; gases from the battery will corrode and damage the battery charger.
•Never allow battery acid to drip on the battery
charger.
•Position the battery charger as far away from the
battery as the leads will allow. The battery charger contains switches that may create a spark.
•Do not set a battery on top of the charger.
•Explosive gases may collect near the ground. Locate
the battery charger as high as possible above ground level.
•Do not use power tools in the charging area.
•Do not smoke or have a naked flame in the charging
area.
•Follow the instructions for connecting and
disconnecting the battery charger leads or battery terminals.
Warning!
A marine (boat) battery must be removed and charged on shore. To charge it on board requires equipment specially designed for marine use. This appliance is NOT designed for such use.
Vehicles may have electrical and electronic systems (e.g. engine management systems, mobile phones) that may be damaged if subjected to high starting voltages and voltage peaks. Before connecting the appliance to the vehicle, read the vehicle’s owner’s manual to confirm that external charging is allowed.
•Follow these instructions and those published by the
battery manufacturer and vehicle manufacturer.
•Only connect and disconnect the dc output clamps
or ring terminals after removing the supply cord from the electric socket. Never allow clamps to touch each other.
•Check the polarity of the vehicle battery terminals
before connecting the appliance. Always disconnect the negative (black) cable first: followed by the positive (red) cable.
When charging a battery installed in the circuit follow the manufacturers instructions for accessing the battery and the following:
•Do not charge the battery while the engine is
operating.
•Be aware that engine components e.g. the coolant
fan may start automatically. Keep hands and body away from engine components and position the battery charger and cables to prevent contact.
•Make sure that the battery charger and the cables are located to prevent damage from closure of doors and engine compartment covers.
•Make sure that the connections can be made without touching the metal body or components adjacent to the battery.
•When using this appliance in proximity to the vehicle’s battery and engine, stand the appliance on a flat, stable surface and be sure to keep all clamps, cords, clothing and body parts away from moving parts of the vehicle.
•If it is necessary to remove the battery from the vehicle to charge or to clean the terminals, make sure that all accessories in the vehicle are switched off, so as not to cause a spark.
•To reduce the risk of electric shock, disconnect the appliance from any power source before attempting maintenance or cleaning.
USE
When all the preparations for charging and personal safety have been completed, proceed as follows:
•For most automotive and similar applications the battery charger may be connected to the battery while it is connected to the dc circuit. Follow the instructions given in “Charging a battery installed in the circuit”.
•If the battery must be disconnected from the circuit before charging, follow the instructions given in “Charging a battery disconnected from the circuit”.
Warning!
A marine (boat) battery must be removed and charged on shore. To charge it on-board requires equipment specially designed for marine use.
Charging a battery installed in the circuit
Incorrect connection, battery short circuit, location of battery and location of the battery charger may create a hazard. Make sure that adequate preparation has been made before proceeding.
Warning!
If the battery posts cannot be accessed or the battery charger clamps or ring terminals will contact the bodywork or components adjacent to the battery, the battery must be removed before charging. Follow the manufacturer’s instructions to remove the battery.
•Check the polarity of the battery posts. A positive
(POS, P, +) battery post usually has a larger diameter than the negative (NEG, N, –) battery post.
•Follow the manufacturers’ instructions to remove any
insulating covers from the battery posts.
•Connect the positive (red) clamp or ring terminal
from the battery charger to the positive (POS, P, +) post of the battery.
•Connect the negative (black) clamp or ring terminal
from the battery charger to the negative (NEG, N, –) post of the battery or to the chassis.
BDV090AU_Manual_091216.indd 4-5 9/12/2016 11:43:45 AM
Page 4
6 7
When disconnecting the battery charger from the battery, always:
•Unplug the battery charger.
•Remove the negative (black) clamp or ring terminal
first.
•Remove the positive (red) clamp or ring terminal last.
•Refit any insulating covers to the battery posts.
Charging a battery disconnected from the circuit
Warning!
Incorrect connection, battery short circuit, location of battery and location of the battery charger may create a hazard. Make sure that adequate preparation has been made before proceeding.
•If the battery is not already removed from the circuit,
follow the manufacturers’ instructions to remove the battery before charging.
•Check the polarity of the battery posts. A positive
(POS,P, +) battery post usually has a larger diameter than the negative (NEG, N, –) battery post.
•Connect the positive (red) clamp or ring terminal
from the battery charger to the positive (POS, P, +) post of the battery.
•Connect the negative (black) clamp or ring terminal
from the battery charger to the negative (NEG, N, –) post of the battery.
When disconnecting the battery charger from the battery, always:
•Unplug the battery charger.
•Remove the negative (black) clamp or ring terminal
first.
•Remove the positive (red) clamp or ring terminal last.
•Refit any insulating covers to the battery posts.
Connecting the appliance with the battery clamps
Warning!
Always disconnect the mains plug from the mains socket before connecting or disconnecting the appliance to or from the battery.
Warning!
Never connect any of the accessory leads together as this will cause a hazard. The accessory leads should only ever be connected to the in-line connector.
•Connect the battery clamps to the battery charger
with the in-line connector.
•The appliance’s output leads have colour-coded
battery clamps (red-positive and black-negative). These connect directly to the corresponding connectors on the battery terminals.
•Follow the steps outlined in “Safety instructions” at
the front of this manual.
•Insert the mains plug of the battery charger into an
mains socket.
Connecting the appliance with the ring terminals
Warning!
Always disconnect the mains plug from the mains socket before connecting or disconnecting the appliance to or from the battery.
Warning!
Never connect any of the accessory leads together as this will cause a hazard. The accessory leads should only ever be connected to the in-line connector.
•Connect the ring terminals to the battery charger
with the in-line connector.
•The output leads have crimped, colour-coded ring
terminals (red-positive and black-negative). The terminals rings connect directly to the corresponding connectors on the battery terminals.
•Remove the nuts from the bolts of the battery
terminal’s connectors.
•Install the red ring terminal to the bolt of the positive
battery terminal connector and replace the nut.
•Install the black ring terminal to the bolt of the
negative terminal connector and replace the nut.
•Insert the mains plug of the battery charger into an
mains socket.
Connecting the appliance with the dc accessory plug
Warning!
Always disconnect the mains plug from the mains socket before connecting or disconnecting the appliance to or from the battery.
Warning!
Never connect any of the accessory leads together as this will cause a hazard. The accessory leads should only ever be connected to the in-line connector.
•Connect the dc accessory plug to the battery charger
with the in-line connector.
•Insert the dc accessory plug into the vehicle’s dc
accessory outlet.
•Insert the mains plug of the battery charger into an
mains socket.
Note:
Some vehicles require that the ignition be switched to the accessory socket position in order to power the accessory socket.
LED Indicators
The appliance has two LED indicators:
•Red fault LED –bad connection, the battery is
not able to accept charge or a reverse polarity connection has been detected.
•Flashing green charging status LED – good
connection and the battery is charging.
•Solid green charging status LED – the battery is fully
charged.
Charging the battery
•Slide the battery voltage selector switch to the 6V or 12V position as required.
•Leave the appliance on.
•Monitor the battery from time to time.
Note:
A clicking sound may occur during the charging process, this is normal.
•When the green charging status LED stops flashing, the battery is fully charged.
•Remove the mains plug from the mains socket.
•Remove the charging leads from the battery.
When the appliance is properly connected, the green charging status LED will flash indicating the unit is connected correctly and charging or light solid to indicate the battery is already fully charged.
The appliance is fully automatic; it will power on when needed and power off when the battery is fully­charged.
The appliance has built-in circuit protection which guards against overcharging or short circuits.
TROUBLESHOOTING
Problem
Solution
The battery is not charging
•Check that the battery charger is properly connected to a live mains outlet (the green charging status LED will flash or light solid).
•Make sure the output connections are secured and the polarity connection is correct.
•Check that the correct voltage has been selected for the battery being charged.
•If the voltage of the battery to be charged has fallen below 4 volts, the battery cannot be charged with this battery charger.
If the charger does not operate after following the above directions, contact the manufacturer.
MAINTENANCE
Your Black & Decker tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.
Warning!
Before performing any maintenance or cleaning of the tool, unplug the unit from the power supply.
•From time to time wipe the appliance with a damp cloth. Do not use any abrasive or solvent-based cleaner. Do not immerse the appliance in water.
Replacing the fuse in the dc accessory plug
•Remove the gold cap by turning it counter clockwise.
•Remove the rubber washer, centre pin and the spring.
•Remove the fuse.
•Fit a new fuse of the same type and size (5 A).
•Install the centre pin, spring and rubber washer.
•Install the gold cap by turning it clockwise onto the
plug.
PROTECTING THE ENVIRONMENT
Correct disposal of this product
This marking indicates that this product should not be disposed with other household waste. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.
Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials.
Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product.
TECHNICAL DATA
Input: 230-240V ac, 50Hz,
20W
Output: 6,3V / 12,6V dc, 1,2A
WARRANTY
Our goods come with guarantees that cannot be excluded under the Australian & New Zealand Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Baccus Worldwide LLC is confident of the quality of its products and offers an outstanding warranty. This warranty statement is in addition to and in no way
BDV090AU_Manual_091216.indd 6-7 9/12/2016 11:43:45 AM
Loading...