Black & Decker BDTF4200R User Manual

42” Tower Fan with Remote Control

Instruction Manual

MODEL NO.: BDTF-4200R

120V AC 60HZ 55W

PLEASE READ, FOLLOW AND

SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY

SAFETY INSTRUCTIONS

Thank you for purchasing this fan. This product has passed through an extensive quality assurance

process. Every care has been taken to ensure that it reaches you in perfect condition.

Warning! When using electric tools, basic safety precautions should be followed to reduce the risk of

fire, electric shock and personal injury, including the following:

Read all of these instructions before attempting to operate this product.

 Check the voltage indicated on the rating plate. This product is designed for a 120V-60Hz power

supply.

 Do not use an extension cord with this fan.
 Do not insert your fingers into the front case. Keep unsupervised children away from the fan.
 Keep hair, tablecloths, clothes or curtains away from the openings of the fan. They could be

caught by the fan’s blades, causing damage or injuries.

 Do not use the fan if the cord or plug are damaged, or if the fan is not working properly.
 Periodically check the fan’s cord. If the power cord is damaged, it must be replaced by the

manufacturer, a service agent or a similar qualified person in order to avoid hazards.

 Do not use this fan outside.
 Do not use this fan in a humid area such as the bathroom.
 Do not use this fan in a window.
 Do not use this fan with any semi-conductors speed control.
 The fan should not operate without the base or lying on its side.
 Do not place the power cord under a cover. Do not place any elements on the power cord. Place

the cord in an area where there is no risk of stumbling over it.

 Do not operate the fan in an area where gasoline, paint or any such flammable liquids are used

or stocked.

 Use this fan only as described in this manual.
 Do not disassemble the fan. None of the parts may be repaired by the user.
 No part of this fan must be replaced by the user.
 The fan should not be opened by user.
 Keep electrical appliances out of the reach of Children. Do not let them use the appliances

without supervision.

OPERATING INSTRUCTIONS:

PRE-OPERATING INSTRUCTIONS:

 Carefully remove your fan from the box (please keep the box for off-season storage).
 For shipping purposes, the fan is packed unassembled.
 Make sure the unit is in the OFF position before plugging it into the outlet.

ASSEMBLY INSTRUCTIONS:

 Carefully remove your fan from the box (please keep the box for off-season storage).
 Figure 1 shows you how the fan is assembled.
 Place the power cord inside the cord groove of column supports #2a and #2b. Snap column

supports #2a and #2b together firmly. (figure 1)

 Attach column support assembly #2 to motor base #3 and secure it with four 1/2״ long M5 screws.

(figure 1)

 Assemble base #1 by interlocking the basses of #1A and #1B together. Thread the power cord

through the large hole in the center. (figure 2)

 Attach base #1 with column support #2 and secure with four 1” M5 screws. Please note that the

power cord on the bottom of base #1 should face toward to the back of the fan. Gently pull any
slack from the power cord outward. (figure 3)

 Align the power cord inside the groove of the base as shown in figure 3 .

OPERATING INSTRUCTIONS:

Remote Control Instructions:

 Place two AAA batteries (included) in the remote control hand unit.
 Plug the power cord into any standard 120V AC, 60 HZ outlet.
 Apply power to the fan by pushing the Fan Speed button. This will activate your fan speed.

Speed Selection- You may now choose the desired fan speed by pressing the ON/OFF button. The fan

speed will rotate between low (1), medium (2) and high (3) speeds by continually pressing the SPEED
button. Press the ON/OFF button to stop the fan.

Oscillation Feature- Turn on the fan’s oscillation feature by pressing the OSC button. This button will

start or stop the oscillation feature. By gently turning the head and from side to side you may also
position the desired fan angle. This fan has 5 mechanism angle positions.

Timer Function- This fan is equipped with a timer that allows you to set the operating time from 1

hour to 12 hours. Each press of the TIMER+ button increases the length of operation by 1 hour, with a
maximum of 12 hours. Each press of the TIMER- button decreases the length of operation by 1 hour,
down to a 1 hour minimum.

Breeze Control- This fan is also equipped with a feature that enables you to choose from three types

of breeze speeds: Continuous, Natural or Sleep. Every time you turn the fan on, it operates in
continuous mode. You may press the MODE button to select the desired breeze speed. In Natural or
Sleep mode, the fan breeze will vary by switching from high to low speed automatically. Set your fan
speed on Low for a lighter breeze and Medium or High for a stronger breeze.

FND Display:

Control panel

Wind wheel

Front cover

Base

Wind entrance window

Back cover

Handle

Power cord

All of the operations described above will be displayed on the FND display screen at the front of the

unit, as figure 5 shown.

Figure 5

Specifications

1. Voltage: 120V~/60Hz

2. Power: 55Watt

3. Rotation Angle: 80°

4. 3 speed controls

5. Weight: 5kg

6. Dimensions: 310X310X1080mm

PART NAMES

WARNING!

 The fan must be placed on a flat area. If not the fan could fall, causing damage or injuries.
 When you disconnect the plug from the outlet, take hold of the plug and then pull it out. Do not

pull on the cord because this could damage it.

 Make sure that the fan does not come into contact with any obstructions while oscillating. This

may cause damage to the obstructions.

USA & Canada Customer Service Number:

1-888-773-8744

www.BlackandDecker.com

5870 NW 163th Street,

Miami Lakes, Florida 33014

USA

3 Year limited warranty: Covers all defective materials and workmanship under

normal household use.

MADE IN CHINA

Black & Decker and the Black and Decker logo are trademarks of the Black & Decker
Corporation and are used under license. All rights reserved. Product may differ
slightly from the picture on the cover of this instruction manual.

VENTILADOR DE TORRE DE 42"

MANUAL DE INSTRUCCIONES

MODELO Nº: BDTF-4200R

120V AC 60HZ 55W

LEA, SIGA Y CONSERVE

ESTAS INSTRUCCIONES

EXCLUSIVAMENTE PARA USO DOMÉSTICO