Bissell PET 13H8 User Manual

USER'S GUIDE
13H8-K
2
Thank You
3
Safety Instructions
4
Product View
5
Assembly
Operations
8-12
Maintenance and Care
13
Troubleshooting
14
Replacement Parts
15
Warranty
16
Product Registration
16
Consumer Care
Thanks for buying a BISSELL vacuum
We’re glad you purchased a BISSELL vacuum. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system.
Your vacuum is well made, and we back it with a limited one year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Care department, so, should you ever have a problem, you’ll receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your vacuum.
Mark J. Bissell Chairman & CEO
2
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical basic precautions should be observed, including the following:
appliance,
READ ALL INSTRUCTIONS BEFORE USING YOUR UPRIGHT VACUUM.
Always connect to a polarized outlet (left slot is wider than right). Unplug from outlet when not in use and before conducting maintenance.
!WARNING: To
reduce the risk of fire, electric shock, or injury:
■ Do not modify the polarized plug to t a non-polarized outlet or extension cord.
■ Do not leave vacuum cleaner unattended when it is plugged in.
■ Unplug from outlet when not in use and before servicing.
■ Do not use outdoors or on wet surfaces.
■ Do not allow children to operate vacuum cleaner or use as a toy.
■ Close attention is necessary when used by or near children.
■ Do not use for any purpose other than described in this User’s Guide.
■ Use only manufacturer’s recommended attachments.
■ Do not use with damaged cord or plug.
■ If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, have it repaired at an authorized service center.
■ Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
■ Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
■ Do not handle vacuum cleaner or plug with wet hands.
■ Do not put any object into openings. Do not use with any opening blocked; keep openings free of dust, lint, hair, and anything that may reduce air ow.
■ Keep hair, loose clothing, ngers, and all parts of body away from openings and moving parts.
■ Turn o all controls before plugging or unplugging vacuum cleaner.
■ Use extra care when cleaning stairs.
■ Do not pick up ammable materials (lighter uid, gasoline, kerosene, etc.) or use in the presence of explosive liquids or vapors.
■ Do not pick up toxic material (chlorine bleach, ammonia, drain cleaner, etc.).
■ Do not use vacuum cleaner in an enclosed space lled with vapors given o by oil base paint, paint thinner, some moth proong substances, ammable dust, or other explosive or toxic vapors.
■ Do not pick up hard or sharp objects such as glass, nails, screws, coins, etc.
■ Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
■ Do not use without lters in place.
■ Use only on dry, indoor surfaces.
■ Keep appliance on a level surface.
■ Do not carry the vacuum cleaner while it is running.
SAVE THESE INSTRUCTIONS FOR FUTURE USE
THIS APPLIANCE HAS A POLARIZED PLUG.
To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a proper outlet. Do not change the plug in any way.
This model is for household use only.
3
Product View
Handle
Pet TurboBrush® Tool
Carry Handle
Upper Tank
Easy Empty Dirt Container
HEPA Media Filter* & Foam Filter
Foot Window
Pet Hair Lifter
Power Switch
Cyclone
Lock ‘n Seal Lever
Quick Release Cord Wrap
Crevice Tool
Cord Hook
®
Hose Holder
Stretch Hose
Power Cord
Dusting/ Upholstery Tool
WARNING:
Do not plug in your vacuum cleaner until you are familiar with all instructions and operating procedures.
*The filter media, not the vacuum as a whole, complies with IEST-RP-CC001.5 HEPA standard.
4
Recline Pedal
Hose Wand
Hose Wand Base
Foot Hose
Assembly
The only tool you’ll need to assemble your vacuum cleaner is a Phillips screwdriver.
Attach handle to vacuum
1. Locate the vacuum handle and
remove the screw packet taped to the handle.
2. Stand the vacuum upright. From
the rear of the unit slide the base of the handle into the grooves at the top of the vacuum body.
3. Ensure the handle fits to the
vacuum body. If there are any gaps, continue to push firmly until the handle is fully seated.
4. Insert the screw into the existing
hole. Tighten with a screwdriver until secure.
2
4
Attach vacuum hose and tools
1. Slide the end of the hose into the
hose wand base. Snap the hose into the hose holder.
Note: The vacuum will not operate properly unless the hose wand is firmly attached.
2. Place the crevice tool on the stor-
age post on the left side of the tank (when viewing vacuum from rear).
3. Place the Pet TurboBrush tool on the
storage post located near the back of the upper handle.
4. Place the dusting brush on the
storage post located on the lower cord wrap.
5. Wrap power cord around
cord wraps.
1
3
5
2
4
5
Loading...
+ 11 hidden pages