Biostar A880GU3Z Setup Manual

A880GU3Z/A880GZ Setup Manual

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the contents here and specially disclaims any implied warranties of merchantability or fitness for any purpose. Further the vendor reserves the right to revise this publication and to make changes to the contents here without obligation to notify any party beforehand.

Duplication of this publication, in part or in whole, is not allowed without first obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and we will not be responsible for any mistakes found in this user’s manual. All the brand and product names are trademarks of their respective companies.

Dichiar azione di confor mità sintetica

Ai sensi dell’art. 2 comma 3 del D.M. 275 del 30/10/2002

Si dichiara che questo prodotto è conforme alle normative vigenti e soddisfa i requisiti essenziali richiesti dalle direttive

2004/108/CE, 2006/95/CE e 1999/05/CE

quando ad esso applicabili

Short De clarat ion of conf ormity

We declare this product is complying with the laws in force and meeting all the essential requirements as specified by the directives

2004/108/CE, 2006/95/CE and 1999/05/CE

whenever these laws may be applied

Table of Contents

Chapter 1: Introduction ........................................ 1

1.1 Before You Start ................................................................................ 1

1.2 Package Checklist............................................................................. 1

1.3 Motherboard Features...................................................................... 2

1.4 Rear Panel Connectors ..................................................................... 3

1.5 Motherboard Layout......................................................................... 4

Chapter 2: Hardware Installation .......................... 5

2.1 Installing Central Processing Unit (CPU)....................................... 5

2.2 FAN Headers...................................................................................... 7

2.3 Installing System Memory ................................................................ 8

2.4 Connectors and Slots....................................................................... 10

Chapter 3: Headers & Jumpers Setup ................... 13

3.1 How to Setup Jumpers .................................................................... 13

3.2 Detail Settings.................................................................................. 13

Chapter 4: RAID Functions.................................. 18

4.1 Operating System............................................................................ 18

4.2 Raid Arrays...................................................................................... 18

4.3 How RAID Works............................................................................. 18

Chapter 5: Useful Help ........................................ 22

5.1 Driver Installation Note.................................................................. 22

5.2 Software............................................................................................ 23

5.3 Extra Information............................................................................ 27

5.4 AMI BIOS Beep Code....................................................................... 29

5.5 Troubleshooting............................................................................... 30

Appendix: SPEC In Other Languages ................... 32

German.................................................................................................................. 32

French .................................................................................................................... 34

Ita lian..................................................................................................................... 36

Spanish ................................................................................................................... 38

Portugue se ............................................................................................................ 40

Polish...................................................................................................................... 42

Russian ................................................................................................................... 44

Arabic..................................................................................................................... 46

Japanese ................................................................................................................ 48

A880GU3Z/A880GZ

1

CHAPTER 1: INTRODUCTION

1.1 B

EFORE YOU START

Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below:

 Prepare a dry and stable working environment with

sufficient lighting.

 Always disconnect the computer from power outlet

before operation.

 Before you take the motherboard out from anti-static

bag, ground yourself properly by touching any safely grounded appliance, or use grounded wrist strap to remove the static charge.

 Avoid touching the components on motherboard or the

rear side of the board unless necessary. Hold the board on the edge, do not try to bend or flex the board.

 Do not leave any unfastened small parts inside the

case after installation. Loose parts will cause short circuits which may damage the equipment.

 Keep the computer from dangerous area, such as heat

source, humid air and water.

 The operating temperatures of the computer should be

0 to 45 degrees Celsius.

1.2 PACKAGE CHECKLIST

Serial ATA Cable X 2 Rear I/O Panel for ATX Case X 1 Installation Guide X 1 Fully Setup Driver CD X 1 (full version manual files inside) USB 2.0 Cable X1 (optional) Serial ATA Power Cable X 1 (optional)

Note : The package contents may be different due to area or your motherboard version.

Motherboard Manual

2

1.3 MOTHERBOARD FEATURES

A880GU3Z A880GZ

CPU

Socket AM3+ AMD Sempron/Athlon II/Phenom II/FX processors AMD 64 Architecture enables 32 and 64 b it computing Supports Hyper Transport 3.0 and Cool=n=Quiet (Maximum Watt: 125W)

FSB

Support HyperTransport 3.0 Supports up to 5.2 GT/s Bandwidth

Chipset

AMD 880G AMD SB850

Super I/O

ITE 8728 Prov ides the mos t co mmonly used lega cy Super I/O functionality Low Pin Count Interface En viro nment C o nt rol in it iatives H/W Mon ito r ITE's "S mart Guard ian" funct ion

ITE 8728 Prov ides the most common ly used lega cy Super I/O functionality Low Pin Count Interface En viro nment C o nt rol in it iatives H/W Mon ito r ITE's "S mart Guard ian" funct ion

Main Memory

DDR3 DIMM Slots x 2 Max Memory Capacity 8GB Each DIMM supports 512MB/1GB/2GB/4GB DDR3 Dual Channe l Mode DDR 3 me mory mo dule Supports DDR3 800/1066/1333/ 1600(OC)/1866(OC) Register ed DIMM and ECC DIMM is not supported

Graphics

Integrated in AMD 880G Chipset Max S hared V ideo Me mo ry is 512 MB DVI/HDMI/HDCP/UVD2 support

SATA 3

Integrated Serial ATA Controller Data transfer rates up to 6 Gb/s SATA Version 3.0 spe c if icat ion co mpl iant

LAN

Realtek RTL 8111E 10 / 100 / 1000 Mb/s auto negotiation Half / Full duplex capability

Sound

ALC662

5.1 channels audio out High Definition Audio

ALC662

5.1 channels audio out High Definition Audio

USB3.0

ASM1042 N/A PCI Express Gen2 x16 slot x1 PCI Express Gen2 x16 slot x1

Slots

PCI slot x2 PC I slot x2

A880GU3Z/A880GZ

3

A880GU3Z A880GZ

SATA Connector x4 SATA Connector x4 Front Panel Connector x1 Front Panel Connector x1 Front Audio Connector x1 Front Audio Connector x1 S/PDIF Out Connector x1 S/PDIF Out Connector x1 CPU Fan Header x1 CPU Fan Header x1 System Fan Header x1 System Fan Header x1 CMOS clear Header x1 CMOS clear Header x1 USB 2.0 Connector x2 USB 2.0 Connector x2 Power Connector (24pin) x1 Power Conn ector (24pin) x1 Power Connector (4pin) x1 Power Conn ector (4pin) x1 Consumer IR Connector x1 Consumer IR Connector x1 Printer Port Connect or x 1 Pr inter Port Connecto r x1

On Board Connector

Serial port Connector x1 Serial port Connector x1

Back Panel I/O

PS/2 Keyboard / Mouse x1 HDMI Port x 1 VGA Port x1 DVI-D Port x1 LAN Port x1 USB 2.0 Port (by SB850) x2 USB 3.0 Port (by ASM1042) x2 Audio Jack x3

PS/2 Keyboard / Mouse x1 HDMI Port x 1 VGA Port x1 DVI-D Port x1 LAN Port x1 USB 2.0 Port x4 Audio Jack x3

Board Size 200 mm(W) x 244 mm(L) 200 mm(W) x 244 mm(L) Special Features

RAID 0 / 1 / 5 / 10 support RAID 0 / 1 / 5 / 10 support

OS Support

Windows XP / Vista / 7 Biostar reserves the right to add or remove support for any OS With or without notice.

1.4 R

EAR PANEL CONNECTORS

USB3.0 X2 (For A 880GU3Z)

LAN

HDMI VGADVI -D

Line In/ Surround

Line Out

Mic In 1/ Bass/ Center

PS/2

Keyboard / Mouse

USB 2.0 X2

USB2.0 X2 (For A 880GZ)

NOTE: The HDMI and DVI-D ports both can provide digital video signals out-put function, but

these two interfaces canno t work at the same time. The chipset uses the same c hannel to control HDMI and DVI-D, so these ports ca nnot transmit video signal to different display panels simultaneous ly.

NOTE: USB3.0 ports are backward compatible with USB2.0/USB1.X devices. USB3.0 is

controlled by ASM1042, but, USB2.0/USB1.X is controlled by SB850. (For A880GU3Z)

Motherboard Manual

4

1.5 MOTHERBOARD LAYOUT

USBKBMS1

HDMI1

VGA1

DVI1

RJ45USB1

AUDI O1

JUSBV1

JU SBV3

LAN

Codec

Super I/O

F_AUD IO1

JSPDIFOUT1

CIR1 J_PRINT1 J_COM1 F_USB1

JUSBV2

F_USB2

SYS_FAN1

PAN EL1

SATA1

SATA2

BIOS

SATA3

SATA4

JCMOS1

BAT1

ATXP WR 1

D3_1DR A

D3_1

DR B

CPU_FAN1

PCI1

PCI2

PE X16_1

AMD

880G

AMD

SB 850

Socket AM 3+

ATXPW R2

Note: represents the 1■

st

pin.

A880GU3Z/A880GZ

5

CHAPTER 2: HARDWARE INSTALLATION

2.1 I

NSTALLING CENTRAL PROCESSING UNIT (CPU)

Step 1: Pull the lever toward direction A from the socket and then raise the

lever up to a 90-degree angle.

Step 2: Look for the white triangle on socket, and the gold triangle on

CPU should point towards this white triangle. The CPU will fit only in the correct orientation.

Motherboard Manual

6

Step 3: Hold the CPU down firmly, and then close the lever toward direct

B to complete the installation.

Step 4: Put the CPU Fan on the CPU and buckle it. Connect the CPU

FAN power cable to the CPU_FAN1. This completes the installation.

A880GU3Z/A880GZ

7

2.2 FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufact urer. Connect the fan cable to the connector while matching the black wire to pin#1.

CPU_FAN1: CPU Fan Header

Assignment

1 Ground 2 +12V 3

FAN RPM r at e sense

4

1

4 Smart Fan

Control (By Fan)

SYS_FAN1: System Fan Header

Assignment

1 Ground 2 +12V

13

3 FAN RPM rate

sense

Note:

CPU_FAN1 supports 4-pin head connector. SYS_FAN1 supports 3-pi n head connector. When connecting with wires onto connectors, please note that the red wire is the positive and should be co nnected to pin#2, and the black wire is Ground and should be connected to GND.

Motherboard Manual

8

2.3 INSTALLING SYSTEM MEMORY

A. Memory Modules

DDR B3_ 1

D3_A1RD

1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the Slot.

2. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated.

A880GU3Z/A880GZ

9

B. Memory Capacity

DIMM Socket

Location

DDR3 Module

Total M em ory

Size

DDR3_A1 512MB/1GB/2GB/4GB

DDR3_B1 512MB/1GB/2GB/4GB

Max is 8GB.

C. Dual Channel Memory installation

Please refer to the following requirements to activate Dual Channel function:

Install memory module of the same density in pairs, shown in the table

Dual Channel Status

DDR3_A1

DDR3_B1

Disabled X O

Disabled O X

Enabled O O

(O means memory installed, X means memory not installed.)

The DRAM bus width of the memory module must be the same (x8 or x16)

Motherboard Manual

10

2.4 CONNECTORS AND SLOTS

SATA1~SATA4: Serial AT A Connectors

The motherboard has a PCI to SATA Controller with 4 channels SATA interface, it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s.

Assignment

1 Ground 2 TX+ 3 TX4 Ground 5 RX6 RX+

147

SATA4 SATA3 SATA2

SATA1

7 Ground

ATXP W R2: AT X Power Source Connector

This connector will provide +12V to CPU power circuit.

Assignment

1 +12V 2 +12V 3 Ground

1

2

3

4

4 Ground

A880GU3Z/A880GZ

11

ATXP W R1: AT X Power Source Connector

This connector allows user to connect 24-pin power connector on the AT X power supply.

1

12

13

24

Pin Assignm ent Pin Assignm ent

13 +3.3V 1 +3.3V 14 -12V 2 +3.3V 15 Ground 3 Ground 16 PS_ON 4 +5V 17 Ground 5 Ground 18 Ground 6 +5V 19 Ground 7 Ground 20 NC 8 PW_OK 21 +5V 9 Standby Voltage+5V 22 +5V 10 +12V 23 +5V 11 +12V 24 Ground 12 +3.3V

Note:

Before you power on the system, please make sure that both ATXPWR1 and ATXPWR2 connectors have been plugged-in.

Motherboard Manual

12

PEX16_1: PCI-Express Gen2 x16 Slot

- PCI-Express 2.0 compliant.

- Maximum theoretical realized bandwidth of 8GB/s simultaneously per

direction, for an aggregate of 16GB/s totally.

PEX16_1

PCI1~PCI2: Peripheral Component Interconnect Slots

This motherboard is equipped with 2 standard PCI slots. PCI stands for Peripheral Component Interconnect, and it is a bus standard for expansion cards. This PCI slot is designated as 32 bits.

PCI1

PCI2

A880GU3Z/A880GZ

13

CHAPTER 3: HEADERS & JUMPERS SETUP

3.1 H

OW TO SETUP JUMPERS

The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”.

Pin opened Pin closed Pin1-2 closed

3.2 DETAIL SETTINGS

PANEL1: Front Panel Header

This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and speaker connection. It allows user to connect the PC case’s front panel switch functions.

1

8

16

PWR _LED

On/Off

RST

HLED

SPK

++

+

9

-

Pin Assignment Function Pin Assignment Function

1 +5V 9 N/A 2 N/A 10 N/A

N/A

3 N/ A 11 N/ A N/A 4 Speaker

Speaker Connector

12 Power LED (+) 5 HDD LED (+) 13 Power LED (+) 6 HDD LED (-)

Hard drive LED

14 Power LED (-)

Power LED

7 Ground 15 Power button 8 Reset control

Reset button

16 Ground

Power-on button

Motherboard Manual

14

F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel

This header allows user to connect additional USB cable on the PC front panel, and also can be connected with internal USB devices, like USB card reader.

Assignment

1 +5V (fused) 2 +5V (fused) 3 USB4 USB5 USB+ 6 USB+ 7 Ground 8 Ground 9 NC

102

91

FUSB F_1 _USB2

10 Key

JUSBV1/JUSBV2/JUSBV3: Power Source Headers for USB Ports

Pin 1-2 Close:

JUSBV1: +5V for USB ports at USBKBMS1. JUSBV2: +5V for USB ports at F_USB1/F_USB2.

JUSBV3: +5V for USB ports at RJ45USB1.

Pin 2-3 Close:

JUSBV1: +5V STB for USB ports at USBKBMS1.

JUSBV2: +5V STB for USB ports at F_USB1/F_USB2.

JUSBV3: +5V STB for USB ports at RJ45USB1.

13

Pin 1-2 close

13

JUSBV2

JUSBV1

JUSBV3

3

1

13

Pin 2-3 close

A880GU3Z/A880GZ

15

JSPDIFOUT1: Digital Audio-out Connector

This connector allows user to connect the PCI bracket SPDIF output header.

Assignment

1 +5V 2 SPDIF_OUT

13

3 Ground

F_AUDIO1: Front Panel Audio Header

This header allows user to connect the front audio output cable with the PC front panel. This header allows only HD audio front panel connector; AC’97 connector is not acceptable.

Pin Assignment

1 Mic Left in 2 Ground 3 Mic Right in 4 GPIO 5 Right line in 6 Jack Sense 7 Front Sense 8 Key 9 Left line in

19

210

10 Jack Sense

Motherboard Manual

16

JCMOS1: Clear CMOS Header

Placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and the CMOS data. Please carefully follow the procedures to avoid damaging the motherboard.

1

3

Pin 1-2 Close:

Normal Operation (default).

1

3

1

3

Pin 2-3 Close:

Clear CMOS data.

※ Clear CMOS Procedures:

1. Remove AC power line.

2. Set the jumper to “Pin 2-3 close”.

3. Wait for five seconds.

4. Set the jumper to “Pin 1-2 close”.

5. Power on the AC.

6. Reset your desired password or clear the CMOS data.

J_COM1: Serial Port Connector

The motherboard has a Serial Port Connector for connecting RS-232 Port.

Assignment

1 Carrier detect 2 Received data 3 Transmitted data 4 Data terminal ready 5 Signal ground 6 Data set ready 7 Request to send 8 Clear to send 9 Ring indicator

19

210

10 NC

A880GU3Z/A880GZ

17

J_PRINT1: Printer Port Connector

This header allows you to connector printer on the PC.

125

2

26

Pin Assignment Pin Assignment

1 -Strobe 14 Ground 2 -ALF 15 Data 6 3 Data 0 16 Ground 4 -Error 17 Data 7 5 Data 1 18 Ground 6 -Init 19 -ACK 7 Data 2 20 Ground 8 -Scltin 21 Busy

9 Data 3 22 Ground 10 Ground 23 PE 11 Data 4 24 Ground 12 Ground 25 SCLT 13 Data 5 26 Key

CIR1: Consumer IR Connector

This header is for infrared remote control and communication.

Pin Assignment

1 IrDA serial input 2 Ground 3 Ground 4 Key 5 IrDA serial output 6 IR Power

125

6

Motherboard Manual

18

CHAPTER 4: RAID FUNCTIONS

4.1 O

PERATING SYSTEM

Supports Windows XP, Windows Vista, and Windows 7.

4.2 RAID ARRAYS

RAID supports the following types of RAID arrays:

RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for

many applicat ions.

RAID 1: RAID 1 defines techniques for mirroring data.

RAID 10: RAID 10 combines the techniques used in RAID 0 and RAID 1.

RAID 5: RAID 5 provides fault tolerance and better utilization of disk capacity.

4.3 HOW RAID WORKS

RAID 0:

The controller “str ipes” data across multip le drives in a RAID 0 array system. It breaks up a large file into smaller blocks and performs disk reads and writes across multiple drives in para llel. The size of each block is determined by the stripe size parameter, which you set during the creation of the RAID set based on the system environment. This technique reduces overall disk access time and offers high bandwidth.

Features and Benefits

- Drives: Minimum 2, and maximum is up to 6 or 8. Depending on the platform.

- Uses: Intended for non-critical data requiring high data throughput, or any environment that does not require fault tolerance.

- Benefits: provides increased data throughput, especially for large files. No capacity loss penalty for parity.

- Drawbacks: Does not deliver any fault tolerance. If any drive in the array fails, all data is lost.

- Fault Tolerance: No.

Block 1 Block 3 Block 5

Block 2 Block 4 Block 6

A880GU3Z/A880GZ

19

RAID 1:

Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1 array system. The mirrored (backup) copy of the data can reside on the same disk or on a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the active volume or drive is corrupted or becomes unavailable because of a hardware failure.

RAID techniques can be applied for high-availability solutions, or as a form of automatic backup that eliminates tedious manual backups to more expensive and less reliable media.

Features and Benefits

- Drives: Minimum 2, and maximum is 2.

- Uses: RAID 1 is ideal for small databases or any other application that

requires fault tolerance and minimal capacity.

- Benefits: Provides 100% data redundancy. Should one drive fail, the controller switches to the other drive.

- Drawbacks: Requires 2 drives for the storage space of one drive. Performance is impaired during drive rebuilds.

- Fault Tolerance: Yes.

Block 1 Block 2 Block 3

Motherboard Manual

20

RAID 10:

RAID 1 drives can be stripped using RAID 0 techniques. Resulting in a RAID 10 solution for improved resiliency, performance and rebuild performance.

Features and Benefits

- Drives: Minimum 4, and maximum is 6 or 8, depending on the platform.

- Benefits: Optimizes for both fault tolerance and performance, allowing for

automatic redundancy. May be si multaneously used with other RAID levels in an array, and allows for spare disks.

- Drawbacks: Requires twice the available disk space for data redundancy, the same as RAID level 1.

- Fault Tolerance: Yes.

Block 1 Block 3 Block 5

Block 2 Block 4 Block 6

Block 1 Block 3 Block 5

Block 2 Block 4 Block 6

A880GU3Z/A880GZ

21

RAID 5:

RAID 5 stripes both data and parity information across three or more drives. It writes data and parity blocks across all the drives in the array. Fault tolerance is maintained by ensuring that the parity information for any given block of data is placed on a different drive from those used to store the data itself.

Features and Benefits

 Drives: Mi nimu m 3.  Uses: RAID 5 is recommended for transaction processing and general

purpose service.

 Benefits: An ideal combination of good performance, good fault tolerance,

and high capacity and storage efficiency.

 Drawbacks: Individual block data transfer rate same as a single disk. Write

performance can be CPU intensive.

 Fault Tolerance: Yes.

Disk 1

DATA 3

PA RI T Y

DATA 7

DATA 1

DATA 9

PA RI T Y

Disk 2

PA RI T Y DATA 5 DATA 8

DATA 2

PA RI T Y

DATA 11

Disk 3

DATA 4 DATA 6

PA RI T Y

DATA 10 DATA 12

Motherboard Manual

22

CHAPTER 5: USEFUL HELP

5.1 D

RIVER INSTALLATION NOTE

After you installed your operating system, please insert the Fully Setup Driver CD into your optical drive and install the driver for better system performance.

You will see the following window after you insert the CD

The setup guide will auto detect your motherboard and operating system.

Note:

If this window didn’t show up after you insert the Driver CD, please use file browser to locate and execute the file SETUP.EXE under your optical drive.

A. Driver Installation

To install the driver, please click on the Driver icon. The setup guide will list the compatible driver for your motherboard and operating system. Click on each device driver to launch the installation program.

B. Software Installation

To install the software, please click on the Software icon. The setup guide will list the software available for your system, click on each software title to launch the installation program.

C. Manual

Aside from the paperback manual, we also provide manual in the Driver CD. Click on the Manual icon to browse for available manual.

Note:

You will need Acrobat Reader to open the manual file. Please download the latest version of Acrobat Reader so ftware from http://www.adobe.com/produ cts/acrobat/readstep2.html

A880GU3Z/A880GZ

23

5.2 SOFTWARE

Installing Software

1. Insert the Setup CD to the optical drive. The drivers installation program would appear if the Autorun function has been enabled.

2. Select Software In stallatio n, and then click on the respective software title.

3. Follow the on-screen instructions to complete the installation.

Launching Software

After the installation process, you will see the software icon “eHOT Line” / “BIOS Update” appears on the desktop. Double-click the icon to launch the utility.

eHot-Line (Optional)

eHot-Line is a convenient utility that helps you to contact with our Tech-Support system. This utility will collect the system information which is useful for analyzing the problem you may have encountered, and then send these information to our tech-support department to help you fix the problem.

Before you use this uti lity, please set Outlook E xp ress as your default e-mail client application prog ram.

This block will show the information which would be collected in the mail.

Provide the e-mail address t hat you would like to s end the copy to.

Provide the name of th e powe r su ppl y manufacturer and the model no.

Se nd th e mai l out .

Sav e the se info rma tion t o a .t xt fil

e

Exit this dialog.

Select your area or the area cl os e t o you.

*

Pr ovid e th e name of the memor y module manufacturer.

*

Describe conditi on of your system.

*

re pres ent s im port ant information that you must provide. Without this inf ormation, you may not be able to send out the mail.

Motherboard Manual

24

After filling up this informatio n, click “Send” to send the mail out. A warning dialog would appear asking for your confirmation; click “Send” to confirm or “Do Not Send” to cancel.

If you want to save this information to a .txt file, click “Save As…” and then you will see a saving dialog appears asking you to enter file name.

Enter the file name and then click “Save”. Your system information will be saved to a .txt file.

Open the saved .txt file, you will see your system information including motherboard/BIOS/CPU/video/ device/OS information. This information is also concluded in the sent mail.

We will not share customer ’s data with any other third parties, so please feel free to provide your system information while using eHot-Line service.

If you are not using Outlook Express as your default e-mail client application, you may need to save the system information to a .txt file and send the file to our tech support with other e-mail application. Go to the following web

http://www.biostar.com.tw/app/en-us/about/contact.php for getting

our contact information.

A880GU3Z/A880GZ

25

BIOS Update

BIOS Update is a convenient utility which allows you to update your motherboard BIOS under Windows system.

Update BIOS

with a BIOS file

Clear CMOS function

(Only for AWARD BIOS)

Show current BIOS information

Save cur rent B IOS

to a .bin file

AWARD BIOS AMI BIOS

Once click on this button, the saving

dialog will show. Choose the

position to save file and enter file

name. (We recommend that the file

name should be English/number

and no longer than 7 characters.)

Then click Save.

Motherboard Manual

26

Before doing this, please download the proper BIOS file from the website.

For AWARD BIOS, update BIOS procedure should be run with Clear CMOS function, so please check on Clear CMOS first.

Then click Update BIOS button, a dialog will show for asking you backup current BIOS. Click Yes for BIOS backup and refer to the Backup BIOS procedure; or click No to skip this procedure.

After the BIOS Backup procedure, the open dialog will show for requesting the BIOS file which is going to be updated. Please choose the proper BIOS file for updating, then click on Open.

The utility will update BIOS with the proper BIOS file, and this process may take minutes. Please do not open any other applications during this process.

After the BIOS Update process, click on OK to restart the system.

While the system boots up and the full screen logo shows, press <Delete> key to enter BIOS setup.

In the BIOS setup, use the Load Optimized Defaults function and then Save and Exit Setup to exit BIOS setup. BIOS Update is completed.

All the information and content above about the software are subject to be changed without notice. For better performance, the software is being continuously updated. The information and pictures described above are for your reference only. The actual information and settings on board may be slightly different from this manual.

A880GU3Z/A880GZ

27

5.3 EXTRA INFORMATION

CPU Overheated

If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated.

When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again.

In this case, please double check:

1. The CPU cooler surface is placed evenly with the CPU surface.

2. CPU fan is rotated normally.

3. CPU fan speed is fulfilling with the CPU speed.

After confirmed, please follow steps below to relief the CPU protection function.

1. Remove the power cord from power supply for seconds.

2. Wait for seconds.

3. Plug in the power cord and boot up the system.

Or you can:

1. Clear the CMOS data. (See “Close CMOS Header: JCMOS1” section)

2. Wait for seconds.

3. Power on the system again.

Motherboard Manual

28

BIO-Flasher

BIO-Flasher is a BIOS flashing utility providing you an easy and simple way to update your BIOS via USB pen drive or floppy disk.

The BIO-Flasher is built in the BIOS chip. To enter the utility, press <F12> during the Power-On Self Tests (POST) procedure while booting up.

Updating BIOS with BIO-Flasher

1. Go to the website to download the latest BIOS file for the motherboard.

2. Then, save the BIOS file into a USB pen drive or a floppy disk.

3. Insert the USB pen drive or the floppy disk that contains the B IOS file to the USB port or the floppy disk drive.

4. Power on or reset the computer and then press <F12> during the POST process. A select dialog as the picture on the right appears. Select the device contains the BIOS file and press <Enter> to enter the utility.

5. T he utility will show the BIOS files and their respective information. Select the proper BIOS file and press <Enter> then <Y> to perform the BIOS update process.

6. After the update process, the utility will ask you to reboot the syste m. Press <Y> to proceed. BIOS update completes.

z This utility only allows storage device with FAT32/16 format and single

parti tio n.

z Shutting down or resetting the system while updating the B IOS will lead to

system boot failure.

A880GU3Z/A880GZ

29

5.4 AMI BIOS BEEP CODE

Boot Block Beep Codes

Number of Beeps Description

1 No media present. (Insert diskette in floppy drive A:)

2

“AMIBOOT.ROM” file not found in root directory of diskette in

A: 3 Insert next diskette if multiple diskettes are used for recovery 4 Flash Programming successful 5 File read error 7 No Flash EPROM detected

10 Flash Erase error 11 Flash Program error 12 “AMIBOOT.ROM” file size error

13

BIOS ROM image mismatch (file layout does not match

image present in flash device)

POST BIOS Beep Codes

Number of Beeps Description

1 Memory refresh timer error 3 Base memory read/write test error 6 Keyboard controller BAT command failed 7 General exception error (processor exception interrupt error) 8 Display memory error (system video adapter)

Troubleshooting POST BIOS Beep Codes

Number of Beeps Troubleshooting Action

1, 3 Reseat the memory, or replace with known good modules.

6, 7

Fatal error indicating a serious problem with the system.

Consult your system manufacturer. Before declaring the

motherboard beyond all hope, eliminate the possibility of

interference by a malfunctioning add-in card. Remove all

expansion cards except the video adapter.

z If beep codes are generated when all other expansion

cards are absent, consult your system manufacturer’s technical support.

z If beep codes are not generated when all other expansion

cards are absent, one of the add-in cards is causing the malfunction. Insert the cards back into the system one at a time until the problem happens again. This will reveal the malfunctioning card.

8

If the system video adapter is an add-in card, replace or

reseat the

video adapter. If the video adapter is an integrated part of the

system board, the board may be faulty.

Motherboard Manual

30

5.5 TROUBLESHOOTING

Probable Solution

1. There is no power in the system. Power LED does not shine; the fan of the power supply does not work

2. Indicator light on keyboard does not shine.

1. Make sure power cable is securely plugged in.

2. Replace cable.

3. Contact technical support.

System is inoperative. Keyboard lights are on, power indicator lights are lit, and hard drives are running.

Using even pressure on both ends of the DIMM, press down firmly until the module snaps into place.

System does not boot from a hard disk drive, but can be booted from optical drive.

1. Check cable running from disk to disk controller board. Make sure both ends are securely plugged in; check the drive type in the standard CMOS setup.

2. Backing up the hard drive is extremely important. All hard disks are capable of breaking down at any time.

System only boots from an optical drive. Hard disks can be read, applications can be used, but system fails to boot from a hard disk.

1. Back up data and applications files.

2. Reformat the hard drive. Re-install applications and data using backup disks.

Screen message shows “Invalid Configuration” or “CMOS Failure.”

Review system’s equipment. Make sure correct information is in setup.

System cannot boot after user installs a second hard drive.

1. Set master/slave jumpers correctly.

2. Run SETUP program and select correct drive types. Call the drive manufacturers for compatibility with other drives.

A880GU3Z/A880GZ

31

This page is intentionally left blank.

Motherboard Manual

32

APPENDIX: SPEC IN OTHER LANGUAGES

G

ERMAN

A880GU3Z A880GZ

CPU

Sockel AM3+ AMD Sempron/Athlon II/Phenom II/FX Proz essoren Die A MD 64- Architekt ur unt erstütz t eine 3 2-Bitund 64-Bit-Datenverarbeitung Unterstützt Hyper Transport 3.0 und Cool’n’Quiet (Maximales Watt: 125W)

Sockel AM3+ AMD Sempron/Athlon II/Phenom II/FX Proz essoren Die AMD 64-Arch it ektur unterstützt eine 32-Bitund 64-Bit-Datenverarbeitung Unterstützt Hyper Transport 3.0 und Cool’n’Quiet (Maximales Watt: 125W)

FSB

Unterstützt HyperTransport 3.0 mit einer Bandbreite von bis zu 5.2 GT/s

Chipsatz

AMD 880G AMD SB850

Super E/A

ITE 8728 Biet et die h äuf ig v erwend eten a lten Sup er E/A-Funktionen. Low Pin Count-Schnittstelle Umgebungskontrolle, Hardware-Überwachung "Smart Guardian"-Funktion von ITE

Arbeitsspeich er

DDR3 DIMM-Steckplätze x 2 Max. 8GB Arbeitsspeicher Jeder DIMM unterstützt 512MB/ 1GB/2GB/4GB DDR3. Dual-Kanal DDR3 Speichermodul Unterstützt DDR3 800/1066/1333/ 1600(OC)/1866(OC) registrierte DIMMs. ECC DIMMs werden nicht unterstützt.

Grafik

Integrierter AMD 880G-Chipsatz Max. 512MB gemeinsam benutzter Videospeicher Unterstützt DVI/HDMI/HDCP/UVD2

SATA 3

Integrierter Serial ATA-Controller Datentransferrate b is zu 6 Gb /s Konform mit der SATA-Spezifikation Version

3.0.

Integrierter Serial ATA-Controller Datentransferrate b is zu 6 Gb /s Konform mit der SATA-Spezifikation Version

3.0.

LAN

Realtek RTL 8111E 10 / 100 / 1000 Mb/s Auto-Negotiation Halb-/ Vollduplex-Funktion

Realtek RTL 8111E 10 / 100 / 1000 Mb/s Auto-Negotiation

Halb-/ Vollduplex-Funktion HD Audio-Unters tützung

ALC662

5.1-Kanal-Audioausgabe Unterstützt High-Definit ion Audio

ALC662

5.1-Kanal-Audioausgabe

Unterstützt High-Definit ion Audio

USB3.0

ASM1042 N/A PCI Express Gen2 x16 Steckplatz x1 PCI Express Gen2 x16 Steckplatz x1

Steckplätz e

PCI-Steckp latz x 2 PC I-Steckp latz x2

A880GU3Z/A880GZ

33

A880GU3Z A880GZ

SATA-Anschluss x4 SATA-Anschluss x4 Fronttafelanschluss x1 Fronttafelanschluss x1 Front-Audioanschluss x1 Front-Audioanschluss x1 S/PDIF- Ausgangsanschluss x1 S/PDIF- Ausgangsanschluss x1 CPU-Lüfter-Sockel x1 CPU-Lüfter-Sockel x1 System-Lüfter-Sockel x1 System-Lüfter-Sockel x1 "CMOS löschen"-S ockel x1 "C MOS lös chen "- Socke l x1 USB 2.0-Anschluss x2 USB 2.0-Anschluss x2 Stromanschluss (24-polig) x1 Stromanschluss (24-polig) x1 St romans ch luss (4-po lig ) x1 St ro mansch luss (4-po lig) x 1 Verbraucher-IR Anschluss x1 Verbraucher-IR Ansch luss x1 Druckeranschluss Anschluss x1 Druckeranschluss Anschluss x1

Onboard-Ans chluss

Serieller Anschluss x1 Serieller Anschluss x1

Rückseiten-E /A

PS/2-Tastatur / Maus x1 HDMI-Anschluss x1 VGA-Anschluss x1 DVI-D-Anschluss x1 LAN-Anschluss x1 USB 2.0-Anschluss (durch SB850) x2 USB 3.0-Anschlus (durch ASM1042) x2 Audioanschluss x3

PS/2-Tastatur / Maus x1

HDMI-Anschluss x1

VGA-Anschluss x1

DVI-D-Anschluss x1

LAN-Anschluss x1

USB 2.0-Anschluss x4

Audioanschluss x3

Plat inengröß e

200 mm (B) X 244 mm (L) 200 mm (B) X 244 mm (L)

Sonderfunkti onen

Unterstützt RAID 0 / 1 / 5 / 10 Unterstützt RAID 0 / 1 / 5 / 10

OS-Unterstü tzung

Windows XP / Vista / 7 Biostar behält sich das Recht vor, ohne Ankündigung die Unterstützung für ein Betriebssystem hinzuzufügen oder zu entfern en.

Windows XP / Vista / 7

Biostar behält sich das Recht vor, ohne

Ankündigung die Unterstützung für ein

Betriebssystem hinzuzufügen oder zu

entfern en.

Motherboard Manual

34

FRENCH

A880GU3Z A880GZ

UC

Socket AM3+ Processeurs AMD Sempron/Athlon II/Phenom II/FX L'architecture AMD 64 permet le calcul 32 et 64 bits Prend en charge Hyp er Trans port 3.0 et Cool’n’Quiet (Watt maximum : 125W)

Bus frontal

Prend en charge Hyp er Transpo rt 3.0 jusqu'à une bande passante de 5.2 GT/s

Chipset

AMD 880G AMD SB850

Super E/S

ITE 8728 Fournit la fonctionnalité de Super E/S patrimoniales la plus utilisée. Int e rfa ce à f aib le co mpt e d e b roches Initiatives de contrôle environnementales, Mon iteur d e mat ériel Fonction "Gardien intelligent" de l'ITE

Mémoire principale

Fentes DDR3 DIMM x 2 Capacit é mé mo ir e max imale de 8 Go Chaque DIMM prend en charge des DDR3 de 256 Mo/512 Mo et 1Go/2Go/4Go Module de mémoire DDR3 à mode à doub le voie Prend en charge la DDR3 800/1066/1333/ 1600(OC)/1866(OC) Les DIMM à registres et DIMM avec code correcteurs d'erreurs ne so nt pas prises en charg e

Graphiques

Integré dans la chipset AMD 880G Mémoire vidéo partagée maximale de 512 Mo Prise en charge DVI/HDMI/HDCP/UVD2

SATA 3

Contrô leur Serial ATA int é gr é Taux de transfert jusqu'à 6 Go/s. Co nfo rme à la spécificat ion S ATA Vers ion 3 .0

LAN

Realtek RTL 8111E 10 / 100 / 1000 Mb /s négociation automatiqu e Half / Full duplex capability

Realtek RTL 8111E 10 / 100 / 1000 Mb /s négociation automatiqu e

Half / Full duplex capability Prise en charg e aud io HD

ALC662 Sortie aud io à 5 .1 vo ies Prise en charg e de l'aud io haut e déf inition

ALC662

Sortie aud io à 5 .1 vo ies

Prise en charg e de l'aud io haut e déf inition

USB3.0

ASM1042 N/A Fente PCI Express Gen2 x16 x1 Fente PCI Express Gen2 x16 x 1

Fentes

Fente PCI x2 Fente PCI x2

A880GU3Z/A880GZ

35

A880GU3Z A880GZ

Connecteur SATA x4 Connecteur SATA x4 Connecteur du panneau avant x1 Connecteur du panneau avant x1 Connecteur Audio du panneau avant x1 Connecteur Audio du panneau avant x1 Connecteur de sortie S/PDIF x1 Connecteur de sortie S/PDIF x1 Embase de ventilateur UC x1 Embase de ventilateur UC x1 Embase de ventilateur système x1 Embase de ventilateur système x1 Embase d'effacement CMOS x1 Embase d'effacement CMOS x1 Connecteur USB 2.0 x2 Connecteur USB 2.0 x2 Connecteur d' aliment ation x 1 (24 broches)

Connecteur d' aliment ation x 1

(24 broches)

Connecteur d' aliment ation x 1 (4 broch es)

Connecteur d' aliment ation x 1

(4 broch es)

Connecteur de IR du consommateur x1

Connecteur de IR du consommateur

x1

Connecteur de Port d'imprimante x1 Connecteur de Port d'imprimante x1

Connecteur embarqu é

Connecteur de Port série x1 Connecteur de Port série x1

E/S du panneau arrière

Clavier / Souris PS/2 x1 Port HD MI x1 Port VGA x1 Port DVI-D x1 Port LAN x1 Port USB 2.0 (par SB850 ) x2 Port USB 3.0 (par AS M1042) x2 Fiche aud io x3

Clavier / Souris PS/2 x1

Port HD MI x1

Port VGA x1

Port DVI-D x1

Port LAN x1

Port USB 2.0 x4

Fiche aud io x3

Dimension s de la cart e

200 mm (l) X 244 mm (H) 200 mm (l) X 244 mm (H)

Fonctionnal ité s spéciales

Prise en charg e RAID 0 / 1 / 5 / 10 Prise en charg e RA ID 0 / 1 / 5 / 10

Support SE

Windows XP / Vista / 7 Biostar se réserve le droit d'ajouter ou de supprimer le support de SE avec ou sans préavis.

Windows XP / Vista / 7

Biostar se réserve le droit d'ajouter ou de

supprimer le support de SE avec ou sans

préavis.

Motherboard Manual

36

ITALIAN

A880GU3Z A880GZ

CPU

Socket AM3+ Processori AMD Sempron/Athlon II/Phenom II/FX L’arch it et tur a A MD 64 abilit a la computazione 32 e 64 bit Supporto di Hyper Transport 3.0 e Cool’n’Quiet (Watt massimo : 125W)

FSB

Supporto di HyperTransport 3.0 fino a 5.2 GT/s di larghezza di banda

Chipset

AMD 880G AMD SB850

Super I/O

ITE 8728 Fo rnis ce le fun z ionalit à leg a cy Su per I/O usate più comunemente. Interfaccia LPC (Low Pin Count) Funzioni di controllo dell’ambiente: Monitoraggio hardware Funzione "Smart Guardian" di ITE

Memor ia principale

Alloggi DIMM DDR3 x 2 Capacità massima della memoria 8GB Ciascun DIMM supporta DDR3 512MB e 1GB/2GB/4GB Modulo di memoria DDR3 a canale doppio Supporto di DDR3 800/1066/1333/ 1600(OC)/1866(OC) DIMM r egistrati e DIMM ECC non sono supportati

Grafica

Integrata nel Chipset AMD 880G La memo ria video cond ivisa massima è di 512 MB Supporto DVI/HDMI/HDCP/UVD2

SATA 3

Co ntroller S er ia l ATA in t eg rato Velocità di trasferimento dei dati fino a 6 Gb/s. Co mp at ibile specifi che S ATA Vers io ne 3. 0.

LAN

Realtek RTL 8111E

Negoz iazione automatica 10 / 100 / 1000 Mb/s

Capacità Half / Full Dup lex

Realtek RTL 8111E Negoz iazione automatica 10 / 100 / 1000 Mb/s

Capacità Half / Full Dup lex

Supporto audio HD

ALC662 Uscita audio 5.1 canali Supporto audio High-Definition (HD)

USB3.0

ASM1042 N/A

Alloggio PCI Express Gen2 x16 x1 Alloggio PCI Express Gen2 x16 x1

Allo g gi

Allo g gio PC I x 2 Allogg io PC I x 2

A880GU3Z/A880GZ

37

A880GU3Z A880GZ

Connetto re SATA x4 Con nett ore SATA x 4 Connettore pannello frontale x1 Connettore pannello frontale x1 Connettore audio frontale x1 Connettore audio frontale x1 Connettore output SPDIF x1 Connettore output SPDIF x1 Co llet t o re ven t olina C PU x1 Collet tore ventolin a C PU x1 Co llet t o re ven t olina sistema x1 C o llet t ore ven tolina s is t ema x 1 Co llet t o re can ce l laz ione CMO S x1 Collet tore cance llaz io n e C MOS x 1 Connettore USB 2.0 x2 Connettore USB 2.0 x2 Connettore alimentazione x1 (24 pin)

Connettore alimentazione x1 (24 pin)

Connettore alimentazione x1 (4 pin)

Connettore IR del consumatore x1 Connettore IR del consumatore x1 Connettore Porta stampante x1 Connettore Porta stampante x1

Connettori su scheda

Connettore Porta s eriale x1 Co nnettore Porta seriale x1

I/O pannello posteriore

Tastiera / Mouse PS/2 x1 Port a HDMI x1 Port a VGA x1 Port a DV I-D x1 Port a LA N x 1 Porta USB 2.0 (da SB850) x2 Porta USB 3.0 (da ASM1042) x2 Connettore audio x3

Tastiera / Mouse PS/2 x1 Port a HDMI x1 Port a VGA x1 Port a DV I-D x1 Port a LA N x 1 Port a USB 2.0 x4 Connettore audio x3

Dimension i scheda

200 mm (larghezza) x 244 mm (altezza) 200 mm (larghezza) x 244 mm (altezza)

Caratterist iche speciali

Supporto RAID 0 / 1 / 5 / 10 Supporto RAID 0 / 1 / 5 / 10

Sistemi op er at ivi supportati

Windows X P / Vista / 7 Biostar si riserva il dir itto di aggiungere o rimuovere il supporto di qualsiasi sistema operativo senza preavviso.

Motherboard Manual

38

SPANISH

A880GU3Z A880GZ

CPU

Conector AM3+ Procesadores AMD Sempron/Athlon II/Phenom II/FX La arquitectura AMD 64 permite el procesado de 32 y 64 bits Soporta las tecnologías Hyper Transport 3.0 y Cool’n’Quiet (Vatio máximo: 125W)

Conector AM3+

Procesadores AMD Sempron/Athlon II/Phenom

II/FX

La arquitectura AMD 64 permite el procesado de

32 y 64 bits

Soporta las tecnologías Hyper Transport 3.0 y

Cool’n’Quiet

(Vatio máximo: 125W)

FSB

Admite HyperTransport 3.0 con un ancho de banda de hasta 5.2 GT/s

Admite HyperTransport 3.0 con un ancho de

banda de hasta 5.2 GT/s

Conjunto de chips

AMD 880G AMD SB850

Súper E/S

ITE 8728 Le ofrece las funcionalidades heredadas de uso más común Súper E/S. Interfaz de cuenta Low Pin In iciat iv as d e con tro l de ent o rno , Monitor hardware Función "Guardia inteligente" de ITE

ITE 8728

Le ofrece las funcionalidades heredadas de uso

más común Súper E/S.

Interfaz de cuenta Low Pin

In iciat iv as d e con tro l de ent o rno ,

Monitor hardware

Función "Guardia inteligente" de ITE

Memoria principal

Ranuras DIMM DDR3 x 2 Capacidad máxima de memoria de 8GB Cada DIMM admite DDR de 512MB y 1GB/2GB/4GB Módulo de memoria DDR3 de canal Doble Admite DDR3 de 800/1066/1333/ 1600(OC)/1866(OC) No admite DIMM registrados o DIMM comp atib les con ECC

Ranuras DIMM DDR3 x 2

Capacidad máxima de memoria de 8GB

Cada DIMM admite DDR de 512MB y

1GB/2GB/4GB

Módulo de memoria DDR3 de canal Doble

Admite DDR3 de 800/1066/1333/

1600(OC)/1866(OC)

No admite DIMM registrados o DIMM

comp atib les con ECC

Gráficos

Integrados en el conjunto de chips AMD 880G Memoria máxima de vídeo compartida de 512 MB Admite DVI/HDMI/HDCP/UVD2

Integrados en el conjunto de chips AMD 880G

Memoria máxima de vídeo compartida de 512

MB

Admite DVI/HDMI/HDCP/UVD2

SATA 3

Controlador ATA Serie Integrado Tasas de transferencia de hasta 6 Gb/s. Co mp at ible con la ve rsión S ATA 3.0.

Controlador ATA Serie Integrado

Tasas de transferencia de hasta 6 Gb/s.

Co mp at ible con la ve rsión S ATA 3.0.

Red Local

Realtek RTL 8111E Negociación de 10 / 100 / 1000 Mb/s Funciones Half / Full dúplex

Realtek RTL 8111E

Negociación de 10 / 100 / 1000 Mb/s

Funciones Half / Full dúplex

Soporte de sonido HD

ALC662 Salida de sonido de 5.1 canales Soporte de sonido Alta Definición

ALC662

Salida de sonido de 5.1 canales

Soporte de sonido Alta Definición

USB3.0

ASM1042 N/A Ranura PCI Express Gen2 x16 X1 Ranura PCI Express Gen2 x16 X1

Ranuras

Ranura PCI X2 Ranura PCI X2

A880GU3Z/A880GZ

39

A880GU3Z A880GZ

Conector SATA X4 Conector SATA X4 Conector de panel frontal X1 Conector de panel frontal X1 Conector de sonido frontal X1 Conector de sonido frontal X1 Conector de salida S/PDIF X1 Conector de salida S/PDIF X1 Cabecera de ventilador de CPU X1 Cabecera de ventilador de CPU X1 Cabecera de ventilador de sistema X1 Cabecera de ventilador de sistema X1 Cabecera de borrado de CMOS X1 Cabecera de borrado de CMOS X1 Conector USB 2.0 X2 Conector USB 2.0 X2 Conector de alimentación X1 (24 patillas)

Conector de alimentación X1

(24 patillas)

Conector de alimentación X1 (4 patillas)

Conector de alimentación X1

(4 patillas)

Conector de IR del consumidor X1 Conector de IR del consumidor X1 Conector Puerto de impresora X1 Conector Puerto de impresora X1

Conectores en p laca

Conector Puerto serie X1 Conector Puerto serie X1

Panel trasero de E/S

Teclado / R ató n PS/2 X1 Ratón HDMI X1 Puert o VGA X1 Puerto DV I-D X1 Puerto de red local X1 Puerto USB 2.0 (por SB850) X2 Puerto USB 3.0 (por AS M1042 ) X2 Conector de sonido X3

Teclado / R ató n PS/2 X1

Ratón HDMI X1

Puert o VGA X1

Puerto DV I-D X1

Puerto de red local X1

Puert o USB 2. 0 X4

Conector de sonido X3

Ta mañ o d e la placa

200 mm. (A) X 244 Mm. (H) 200 mm. (A) X 244 Mm. (H)

Funciones especiales

Admite RAID 0 / 1 / 5 / 10 Admite RAID 0 / 1 / 5 / 10

Soporte de sistema operativo

Windows XP / Vista / 7 Biostar se reserva el derecho de añadir o retirar el soporte de cualquier SO con o sin aviso previo.

Windows XP / Vista / 7

Biostar se reserva el derecho de añadir o retirar

el soporte de cualquier SO con o sin aviso previo.

Motherboard Manual

40

PORTUGUESE

A880GU3Z A880GZ

CPU

Socket AM3+ Processadores AMD Sempron/Athlon II/Phenom II/FX A arquitectura AMD 64 permite uma computação de 32 e 64 bits Sup orta as tecno log ias H ype r Transport 3.0 e Cool’n’Quiet (Watt máx imo: 12 5W )

Socket AM3+

Processadores AMD Sempron/Athlon II/Phenom

II/FX

A arquitectura AMD 64 permite uma

computação de 32 e 64 bits

Sup orta as tecno log ias H ype r Transport 3.0 e

Cool’n’Quiet

(Watt máx imo: 12 5W )

FSB

Suporta a tecnologia HyperTransport 3.0 com uma largura de banda até 5.2 GT/s

Suporta a tecnologia HyperTransport 3.0 com

uma largura de banda até 5.2 GT/s

Chipset

AMD 880G AMD SB850

Especificaç ão Super I/O

ITE 8728 Proporciona as funcionalidades mais utilizadas em termos da especificação Super I/O. Interface LPC (Low Pin Count). In iciat iv as p ar a cont ro lo do amb ien te Monitorização do hardware Função "S mart Gu ard ian" da ITE

ITE 8728

Proporciona as funcionalidades mais utilizadas

em termos da especificação Super I/O.

Interface LPC (Low Pin Count).

In iciat iv as p ar a cont ro lo do amb ien te

Monitorização do hardware

Função "S mart Gu ard ian" da ITE

Memória principal

Ranhuras DIMM DDR3 x 2 Capacidad e máx ima de me mória: 8 GB Cada módulo DIMM suporta uma memória DDR3 de 512 MB & 1 GB/2 GB/4 GB Módulo de memória DDR3 de canal duplo Suporta módulos DDR3 800/1066/1333/ 1600(OC)/1866(OC) Os módulos DIMM registados e os DIMM ECC não são suportados

Ranhuras DIMM DDR3 x 2

Capacidad e máx ima de me mória: 8 GB

Cada módulo DIMM suporta uma memória

DDR3 de 512 MB & 1 GB/2 GB/4 GB

Módulo de memória DDR3 de canal duplo

Suporta módulos DDR3 800/1066/1333/

1600(OC)/1866(OC)

Os módulos DIMM registados e os DIMM ECC

não são suportados

Placa gráf ica

Integrada no chipset A MD 880G Memória de vídeo máxima partilhada: 512 MB Suporta as funções DV I/HDMI/HDCP/UVD2

Integrada no chipset A MD 880G

Memória de vídeo máxima partilhada: 512 MB

Suporta as funções DV I/HDMI/HDCP/UVD2

SATA 3

Controlador Serial ATA integrado Velocidades de transmissão de dados até 6 Gb/s. Co mpat ib il idad e com a espe cifica ção S ATA versão 3.0 .

Controlador Serial ATA integrado

Velocidades de transmissão de dados até 6

Gb/s.

Co mpat ib il idad e com a espe cifica ção S ATA

versão 3.0 .

LAN

Realtek RTL 8111E Auto negociação de 10 / 100 / 1000 Mb/s Capacidade semi/full-duplex

Realtek RTL 8111E

Auto negociação de 10 / 100 / 1000 Mb/s

Capacidade semi/full-duplex

Suporte para áudio de alta definição

ALC662 Saída de áudio de 5.1 canais Suporta a especificação High-Definition Audio

ALC662

Saída de áudio de 5.1 canais

Suporta a especificação High-Definition Audio

USB3.0

ASM1042 N/A Ranhura PCI Express Gen2 x16 x1 Ranhura PCI Express Gen2 x16 x1

Ranhuras

Ranhura PCI x2 Ranhura PCI x2

A880GU3Z/A880GZ

41

A880GU3Z A880GZ

Conector SATA x4 Conector SATA x4 Conector do painel frontal x1 Conector do painel frontal x1 Conector de áudio frontal x1 Conector de áudio frontal x1 Conector de saída S/PDIF x1 Conector de saída S/PDIF x1 Conector da ventoinha da CPU x1 Conector da ventoinha da CPU x1 Conector da ventoinha do sistema x1 Conector da vento inha do sistema x1 Conector para limpeza do CMOS x1 Conector para limpeza do CMOS x1 Conector USB 2.0 x2 Conector USB 2.0 x2 Conector de alimentação x1 (24 pinos)

Conector de alimentação x1

(24 pinos)

Conector de alimentação x1 (4 p inos )

Conector de alimentação x1

(4 p inos )

Conector de IR do consumidor x1 Conector de IR do consumidor x1 Conector da para impressora x1 Conector da para impressora x1

Conectores na placa

Conector da Porta série x1 Conector da Porta série x1

Entradas/S aídas no painel traseiro

Teclado / R ato PS/2 x 1 Port a HD MI x1 Porta VGA x1 Port a DV I-D x1 Port a LA N x1 Porta USB 2.0 (por SB850) x2 Porta USB 3.0 (por ASM1042) x2 Tomada de áudio x3

Teclado / R ato PS/2 x 1

Port a HD MI x1

Porta VGA x1

Port a DV I-D x1

Port a LA N x1

Port a USB 2.0 x4

Tomada de áudio x3

Tamanho da placa

200 mm (L) X 244 mm (A) 200 mm (L) X 244 mm (A)

Característi cas especiais

Suporta as funções RA ID 0 / 1 / 5 / 10 Suporta as funções RA ID 0 / 1 / 5 / 10

Sistemas operativos suportados

Windows XP / Vista / 7 A Biostar reserva-se o direito de adicionar ou remover suporte para qualquer sistema operativo com ou sem aviso prévio.

Windows XP / Vista / 7

A Biostar reserva-se o direito de adicionar ou

remover suporte para qualquer sistema

operativo com ou sem aviso prévio.

Motherboard Manual

42

POLISH

A880GU3Z A880GZ

Procesor

Socket AM3+ AMD Sempron/Athlon II/Phenom II/FX Procesory Architektura AMD 64 umożliwia przetwarzanie 32 i 64 bitowe Obsługa Hyper Transport 3.0 oraz Cool’n’Quiet (Maksymalny Watt: 125W)

Socket AM3+

AMD Sempron/Athlon II/Phenom II/FX

Procesory

Architektura AMD 64 umożliwia przetwarzanie

32 i 64 bitowe

Obsługa Hyper Transport 3.0 oraz Cool’n’Quiet

(Maksymalny Watt: 125W)

FSB

Obsługa HyperTransport 3.0 o szerokości pas ma do 5.2 GT/s

Obsługa HyperTransport 3.0 o szerokości pas ma

do 5.2 GT/s

Chipset

AMD 880G AMD SB850

Pamięć główna

Gniazda DDR3 DIMM x 2 Maks. wielkość pamięci 8GB Każde gniazdo DIMM obsługuje moduły 512MB oraz 1GB/2GB/4GB DDR3 Mod uł pamięci DDR3 z trybem podwójnego kana łu Obsługa DDR3 800/1066/1333/ 1600(OC)/1866(OC) Brak obsług i Regist er ed D IMM oraz ECC DIMM

Gniazda DDR3 DIMM x 2

Maks. wielkość pamięci 8GB

Każde gniazdo DIMM obsługuje moduły 512MB

oraz 1GB/2GB/4GB DDR3

Mod uł pamięci DDR3 z trybem podwójnego

kana łu

Obsługa DDR3 800/1066/1333/

1600(OC)/1866(OC)

Brak obsług i Regist er ed D IMM oraz ECC DIMM

Super I/O

ITE 8728 Zapewnia najbardziej powszechne funkcje Super I/O. Interfejs Low Pin Count Funkcje kontroli warunków pracy, Mon itor H /W Funkcja ITE "Smart Guard ian"

ITE 8728

Zapewnia najbardziej powszechne funkcje

Super I/O.

Interfejs Low Pin Count

Funkcje kontroli warunków pracy,

Mon itor H /W

Funkcja ITE "Smart Guard ian"

Graf ika

Zintegrowana w chipsecie AMD 880G Maks. wielkość współdz ielonej pa mięci video wynosi 512 MB Obsługa DVI/HDMI/HDCP/UVD2

Zintegrowana w chipsecie AMD 880G

Maks. wielkość współdz ielonej pa mięci video

wynosi 512 MB

Obsługa DVI/HDMI/HDCP/UVD2

SATA 3

Zintegrowany kontroler Serial ATA Transfer danych do 6 Gb/s. Zgodność ze specyfikacją SATA w wersj i 3.0.

Zintegrowany kontroler Serial ATA

Transfer danych do 6 Gb/s.

Zgodność ze specyfikacją SATA w wersj i 3.0.

LAN

Realtek RTL 8111E 110 / 100 / 1000 Mb/s z automatyczną negocjacją szybkości Działanie w trybie połowicznego / pełnego dupleksu

Realtek RTL 8111E

110 / 100 / 1000 Mb/s z automatyczną

negocjacją szybkości

Działanie w trybie połowicznego / pełnego

dupleksu

Obsługa aud io HD

ALC662

5.1 kanałowe wyjście audio Obsługa H igh- Def in ition A ud io

ALC662

5.1 kanałowe wyjście audio

Obsługa H igh- Def in ition A ud io

USB3.0

ASM1042 N/A Gniazdo PCI Express Gen2 x16 x1 Gniazdo PCI Express Gen2 x16 x1

Gniazda

Gniazdo PCI x2 Gniazdo PCI x2

A880GU3Z/A880GZ

43

A880GU3Z A880GZ

Złącze SATA x4 Złącze SATA x4 Złącze panela przedniego x1 Złącze panela przedniego x1 Przedn ie złącze audio x1 Prz edn ie złącze aud io x1 Złącze wyjścia S/PDIF x1 Złącze wyjścia S/PDIF x1 Złącze głó wkowe wentylatora procesora x1 Złącze główkowe wentylatora procesora x1 Złącze głó wkowe wentylatora systemowego x1 Złącze głó wkowe wentylatora systemowego x1 Złącze głó wkowe kasowan ia CMOS x1 Złącze g łówkow e kaso wan ia CMOS x1 Złącze USB 2.0 x2 Złącze USB 2.0 x2 Złącze zasilania (24 pinowe) x1 Złącze zasilania (24 pinowe) x1 Złącze zas ilania (4 p ino we) x1 Złącze zas ilania (4 p ino we) x 1 Złącze Konsument IR x1 Złącze Konsument IR x1 Złącze Port drukarki x1 Złącze Port drukarki x1

Złącza wbud owan e

Złącze Port szeregowy x1 Złącze Port sz eregowy x 1

Back Panel I/O

Klaw iatura / Mysz PS/2 x 1 Port HD MI x1 Port VGA x1 Port DVI-D x1 Port LAN x1 Port USB 2.0 (przez SB850 ) x2 Port USB 3.0 (przez AS M1042) x2 Gniazdo audio x3

Klaw iatura / Mysz PS/2 x 1

Port HD MI x1

Port VGA x1

Port DVI-D x1

Port LAN x1

Port USB 2.0 x4

Gniazdo audio x3

Wymiary płyty

200 mm (S) X 244 mm (W) 200 mm (S) X 244 mm (W)

Funkcje specjalne

Obsługa RAID 0 / 1 / 5 / 10 Obsługa RAID 0 / 1 / 5 / 10

Obsluga systemu operacyjne go

Windows XP / Vista / 7 Biostar zastrzega sobie prawo dodawania lub odwoływ ania obsług i dowo lneg o s ys t emu operacyjnego b ez powiado mienia.

Windows XP / Vista / 7

Biostar zastrzega sobie prawo dodawania lub

odwoływ ania obsług i dowo lneg o s ys t emu

operacyjnego b ez powiado mienia.

Motherboard Manual

44

RUSSIAN

A880G U3Z A880GZ

CPU (центральны

й процессор)

Гнездо AM3+ Проц ессоры AMD Sempron/Athlon II/Phenom

II/FX

Арх итектура AMD 64 разрешать обработка данных на 32 и 64 бит Поддержка Hyper Transport 3.0 и Coo l’n’Qu iet (Макси мальн ый ватт: 125W)

Гнездо AM3+ Проц ессоры AMD Sempron/Athlon II/Phenom

II/FX

Арх итектура AMD 64 разрешать обработка данных на 32 и 64 бит Поддержка Hyper Transport 3.0 и Coo l’n’Qu iet

(Макси мальн ый ватт: 125W)

FSB

Поддержка HyperTransport 3.0 с пропускной способностью до 5.2 GT/s

Поддержка HyperTransport 3.0 с пропускной

способностью до 5.2 GT/s Набо р микросхем

AMD 880G AMD SB850

Основная память

Слоты DDR3 DIMM x 2 Максимальная ёмкость памяти 8 ГБ Каждый модуль DIMM поддерживает 512МБ & 1ГБ/2ГБ /4ГБ DDR3 Мод ул ь памяти с двухкан альным режимом

DDR3 Поддержка DDR3 800/1066/1333/ 1600(OC)/1866(OC)

Не поддерживает зарегистрированные модули DIMM and ECC DIMM

Слоты DDR3 DIMM x 2

Максимальная ёмкость памяти 8 ГБ

Каждый модуль DIMM поддерживает 512МБ

& 1ГБ/2ГБ /4ГБ DDR3

Мод ул ь памяти с двухкан альным режимом

DDR3

Поддержка DDR3 800/1066/1333/

1600(OC)/1866(OC)

Не поддерживает зарегистрированные

модули DIMM and ECC DIMM

Super I/O

ITE 8728

Обеспечивает наиболее используемые действующие фун кц ио наль ны е возможно сти Super I/O. Интерфейс с ни зким количеством выводов Инициативы по охране окружающей среды, Аппаратный монитор Функция ITE "Smart Guardian"

(Интеллектуальная защита)

ITE 8728

Обеспечивает наиболее используемые

действующие фун кц ио наль ны е

возможно сти Super I/O.

Интерфейс с ни зким количеством выводов

Инициативы по охране окружающей среды,

Аппаратный монитор

Функция ITE "Smart Guardian"

(Интеллектуальная защита)

Графика

Встроенная в набор микросхем AMD 880G Максимальная совместно используемая видео память составляет 512 МБ Поддержка DVI/HDMI/HDCP/UVD2

Встроенная в набор микросхем AMD 880G

Максимальная совместно используемая

видео память составляет 512 МБ

Поддержка DVI/HDMI/HDCP/UVD2

SATA 3

Встроенное последовательное устройство управлени я ATA скорость передачи данных до 6 гигабит/с. Соответствие специ фикации SATA версия

3.0.

Встроенное последовательное устройство

управлени я ATA

скорость передачи данных до 6 гигабит/с.

Соответствие специ фикации SATA версия

3.0.

Локальна я сеть

Realtek RTL 8111E Автоматическое согласование 10 / 100 / 1000 Мб /с Частичная / полная дуплексная способность

Realtek RTL 8111E

Автоматическое согласование 10 / 100 /

1000 Мб /с

Частичная / полная дуплексная способность Звуко вая поддержка жесткого диска

ALC662 Звуко вая поддержка H igh- Def inition

5.1канальный звуковой выход

ALC662

Звуко вая поддержка H igh- Def inition

5.1канальный звуковой выход

USB3.0

ASM1042 N/A

Слот PCI Express Gen2 x16 x1 Слот PCI Express Gen2 x16 x1

Слоты

Слот PCI x2 Слот PC I x2

A880GU3Z/A880GZ

45

A880G U3Z A880GZ

Разъ ём SATA x4 Разъ ём SATA x4 Разъ ём на лицевой панели x1 Разъём на лицевой панели x1 Входной звуковой разъём x1 Входной звуковой разъём x1 Разъ ём вывода для S/PDIF x1 Ра зъ ём вывода для S/PDIF x1 Контактирующее приспособление вентил ятора центрального процессора x1

Контактирующее приспособление

вентил ятора центрального

процессора x1

Контактирующее приспособление вентил ятора системы x1

Контактирующее приспособление

вентил ятора системы x1

Открытое контактирующее приспособление CMOS x1

Открытое контактирующее

приспособление CMOS x1

USB 2.0-разъём x2 USB 2.0-разъём x2 Разъ ем питания (24 вы вод ) x1 Разъем питания (24 вывод) x1 Разъ ем питания (4 вывод) x1 Ра зъ ем питания (4 вывод) x1 Разъ ём едока ИКЫЙ x1 Разъём едока ИКЫЙ x1 Разъ ём Порт подключения принтера x1

Разъ ём Порт подключения

принтера x1

Встроенный разъём

Разъ ём Последоват ельный порт x1 Ра зъём Последовательный порт x1

Задняя панель средств ввода-вывод а

Клавиатура / Мышь PS /2 x1 Порт HD MI x1 Порт VGA x1 Порт DVI-D x1 Порт LAN x1

USB 2.0-порт (по SB850) x2 USB 3.0-порт (по ASM1042) x2

Гнездо для подключения наушников x3

Клавиатура / Мышь PS /2 x1

Порт HD MI x1

Порт VGA x1

Порт DVI-D x1

Порт LAN x1

USB 2.0-порт x4

Гнездо для подключения

наушников x3

Размер панели

200 мм (Ш) X 244 мм (В) 200 мм (Ш) X 244 мм (В)

Специальные технические характеристи ки

Поддержка RAID 0 / 1 / 5 / 10 Поддержка RAID 0 / 1 / 5 / 10

Поддержка

OS

Windows XP / Vista / 7 Biostar сохраняет за собой право добавлять

или удалять средства обеспечения для OS с или без предварительного уведомления.

Windows XP / Vista / 7

Biostar сохраняет за собой право добавлять

или удалять средства обеспечения для OS с

или без предварительного уведомления.

Motherboard Manual

46

ARABIC

A880GZ A880GU3Z

ﺲﺒﻘﻣA ﺲﺒﻘﻣ AM3+

تﺎﺠﻟﺎﻌﻣAMD Sempron/Athlon II/Ph enom II/FX

ﺔﻴﻨﻘﺗ ﻦﻜﻤﺗAMD 64 ﺔﻋﺮﺴﺏ ﺔﻴﺏﻮﺳﺎﺤﻟ ا تﺎﻴﻠﻤﻌﻟا ءاﺮﺝإ 32 و64 ﺖﺏ

ﺔﻴﻨﻘ ﺗ ﻢﻋﺪﺗHyper Transp ort و 3.0 Cool’n’Quiet

(طاو ىﻮﺼﻗ: 125و)

ﺲﺒﻘﻣAM3+

تﺎﺠﻟﺎﻌﻣAMD Sempron/Athlon II/Ph enom II/FX

ﺔﻴﻨﻘﺗ ﻦﻜﻤﺗAMD 64 ﺔﻋﺮﺴﺏ ﺔﻴﺏﻮﺳﺎﺤﻟ ا تﺎﻴﻠﻤﻌﻟا ءاﺮﺝإ 32 و64 ﺖﺏ

ﺔﻴﻨﻘ ﺗ ﻢﻋﺪﺗHyper Transp ort و 3.0 Cool’n’Quiet

(طاو ىﻮﺼﻗ: 125و)

ةﺪﺡو ﺔﺠﻟﺎﻌﻤﻟا

ﺔیﺰآﺮﻤﻟا

ﺔﻴﻨﻘ ﺗ ﻢﻋﺪﺗHyperTransport ﻰﻟإ ﻞﺼی ددﺮﺘﺏ 3.0 5.2 GT/s ﺔﻴﻨﻘ ﺗ ﻢﻋﺪﺗHyperTransport ﻰﻟإ ﻞﺼی ددﺮﺘﺏ 3.0 5.2 GT/s

ﻞﻗﺎﻨﻟا ﻲﻣﺎﻣﻷا ﻲﺒﻥﺎﺠﻟا

AMD 880G

AMD SB850

AMD 880G

AMD SB850

ﺔﻋﻮﻤﺠﻣ ﺢﺋاﺮﺸﻟا

ITE 8728

ﺔﻔﻴﻇ و ﺮﻓﻮﺗSuper I/O ًﺎﻣ ا ﺪ ﺨﺘ ﺳ ا ﺮﺜآﻷا .

ﺗﻢﻋﺪ ﺔﻴﻨﻘ ﺗ Low Pin Count Interface

ﺔﺌﻴﺒﻟا ﻲﻓ ﻢﻜﺤﺘﻟا ﻞﺋﺎﺳو:

ﻤﻟ ﺐﻗاﺮﻣةﺰﻬﺝﻷا ﺔﻟﺎﺡ ﺔﻓﺮﻌ

ﺔﻔﻴﻇو"S mart Guard ian" ﻦﻣ IT E

ITE 8728

ﺔﻔﻴﻇ و ﺮﻓﻮﺗSuper I/O ًﺎﻣ ا ﺪ ﺨﺘ ﺳ ا ﺮﺜآﻷا .

ﺗﻢﻋﺪ ﺔﻴﻨﻘ ﺗ Low Pin Count Interface

ﺔﺌﻴﺒﻟا ﻲﻓ ﻢﻜﺤﺘﻟا ﻞﺋﺎﺳو:

ةﺰﻬﺝﻷا ﺔﻟﺎﺡ ﺔﻓﺮﻌﻤﻟ ﺐﻗاﺮﻣ

ﺔﻔﻴﻇو"S mart Guard ian" ﻦﻣ IT E

Super I/O

ﺔﺤﺘﻓDDR3 DIM M دﺪﻋ2

ﻮﺼﻗ ةﺮآاذ ﺔﻌﺳ ى8 ﺖیﺎﺏ ﺎﺠﻴﺝ

ﺔﺤﺘﻓ ﻞآ ﻢﻋﺪﺗDIMM عﻮﻥ ﻦﻣ ةﺮآاذ ﻢﻋﺪﺗ DDR3 ﺔﻌﺳ

512 ﺖیﺎﺏ ﺎﺠﻴﻣ

و1/و 2/و 4 ﺎﺠﻴﺝﺖیﺎﺏ

ةﺮآاذ ةﺪﺡوDDR3 ﻘﻟا ﺔﺝودﺰﻣةﺎﻨ

عﻮﻥ ﻦﻣ ةﺮآاﺬﻟا ﻢﻋﺪﺗDDR3 تﺎﻌﺳ

800/1066/1333/1600)OC/(1866)OC(ﺖیﺎﺏ ﺎﺠﻴﻣ

ةﺮآاﺬﻟا ﻖﺋﺎﻗر ﻢﻋﺪﺗ ﻻDIMM ﻊﻣ ﻖﻓاﻮﺘﺗ ﻻ ﻲﺘﻟا ﻚﻠﺗو ECC

ﺤﺘﻓ ﺔDDR3 DIM M دﺪﻋ2

ىﻮﺼﻗ ةﺮآاذ ﺔﻌﺳ8 ﺖیﺎﺏ ﺎﺠﻴﺝ

ﺔﺤﺘﻓ ﻞآ ﻢﻋﺪﺗDIMM عﻮﻥ ﻦﻣ ةﺮآاذ ﻢﻋﺪﺗ DDR3 ﺔﻌﺳ

512 ﺖیﺎﺏ ﺎﺠﻴﻣ

و1/و 2/و 4 ﺎﺠﻴﺝﺖیﺎﺏ

ةﺮآاذ ةﺪﺡوDDR3 ﻘﻟا ﺔﺝودﺰﻣةﺎﻨ

عﻮﻥ ﻦﻣ ةﺮآاﺬﻟا ﻢﻋﺪﺗDDR3 تﺎﻌﺳ

800/1066/1333/1600)OC/(1866)OC(ﺖیﺎﺏ ﺎﺠﻴﻣ

ةﺮآاﺬﻟا ﻖﺋﺎﻗر ﻢﻋﺪﺗ ﻻDIMM ﻊﻣ ﻖﻓاﻮﺘﺗ ﻻ ﻲﺘﻟا ﻚﻠﺗو ECC

ةﺮآاﺬﻟا ﺔﻴﺴﻴﺋﺮﻟا

ﻖﺋﺎﻗر ﻲﻓ ﺔﺠﻣﺪﻣ AMD 880G

ﻰﺼﻗأ ﺔﻌﺳ ةﺮآاﺬﻟ ﻮیﺪ ﻴﻔﻟا ﺔآﺮﺘﺸﻤﻟا 512 ﺎﺠﻴﻣ ﺖیﺎﺏ

ﺔﻴﻨﻘ ﺗ ﻢﻋﺪﺗDVI/HDMI/HDCP/UVD2

ﻖﺋﺎﻗر ﻲﻓ ﺔﺠﻣﺪﻣ AMD 880G

ﻰﺼﻗأ ﺔﻌﺳ ةﺮآاﺬﻟ ﻮیﺪ ﻴﻔﻟا ﺔآﺮﺘﺸﻤﻟا 512 ﺎﺠﻴﻣ ﺖیﺎﺏ

ﺔﻴﻨﻘ ﺗ ﻢﻋﺪﺗDVI/HDMI/HDCP/UVD2

ﺔﻗﺎﻄﺏ تﺎﻣﻮﺳﺮﻟا

ﻢﻜﺤﺘﻣ Serial ATA ﻞﻣﺎﻜﺘﻣ

ﻞﻘﻥ تﺎﻥﺎﻴﺒﻟا تﺎﻋﺮﺴﺏ ﻞﺼ ﺗ ﻰﻟإ 6 ﺖﺏﺎﺠﻴﺝ/ﺔﻴﻥﺎ ﺙ.

ﺔﻘﺏﺎﻄﻣ تﺎﻔﺹاﻮﻤﻟ SATA راﺪﺹﻹا 3.0.

ﻢﻜﺤﺘﻣ Serial ATA ﻞﻣﺎﻜﺘﻣ

ﻞﻘﻥ تﺎﻥﺎﻴﺒﻟا تﺎﻋﺮﺴﺏ ﻞﺼ ﺗ ﻰﻟإ 6 ﺖﺏﺎﺠﻴﺝ/ﺔﻴﻥﺎ ﺙ.

ﺔﻘﺏﺎﻄﻣ تﺎﻔﺹاﻮﻤﻟ SATA راﺪﺹﻹا 3.0.

SATA 3

Realtek RTL 8111E

ضوﺎﻔﺗ ﻲﺋ ﺎﻘﻠﺗ 10/100 ﺎﺠﻴﻣ ﺖیﺎﺏ /ﺔﻴﻥﺎﺙ و1ﺎﺠﻴﺝ ﺖﺏ/ﺔﻴﻥﺎﺙ

ﻞﻣﺎﻜﻟا جودﺰﻤﻟا ﻞﻘﻨﻟا ﺔﻴﻥﺎﻜﻣإ/ﻲﻔﺼﻨﻟا

Realtek RTL 8111E

ضوﺎﻔﺗ ﻲﺋ ﺎﻘﻠﺗ 10/100 ﺎﺠﻴﻣ ﺖیﺎﺏ /ﺔﻴﻥﺎﺙ و1ﺎﺠﻴﺝ ﺖﺏ/ﺔﻴﻥﺎﺙ

ﻞﻣﺎﻜﻟا جودﺰﻤﻟا ﻞﻘﻨﻟا ﺔﻴﻥﺎﻜﻣإ/ﻲﻔﺼﻨﻟا

ﺔﻜﺒﺵ ﺔﻴﻠﺥاد

ALC662

5.1 تاﻮ ﻨﻗ جﺮﺨﻟ تﻮﺼﻟا

ﻣ ﻒیﺮﻌﺘﻟا ﻲﻟﺎﻋ تﻮﺼﻟا ﺔﻴﻨﻘ ﺗ ﻢﻋﺪﺗﻦ

ALC662

5.1 تاﻮ ﻨﻗ جﺮﺨﻟ تﻮﺼﻟا

ﻦﻣ ﻒیﺮﻌﺘﻟا ﻲﻟﺎﻋ تﻮﺼﻟا ﺔﻴﻨﻘ ﺗ ﻢﻋﺪﺗ

ﻢﻋد تﻮﺼﻟا ﻲﻟﺎﻋ

ﻒیﺮﻌﺘﻟا

N/A

ASM1042

USB3.0

ﺔﺤﺘﻓGen2 x16 PCI Express دﺪﻋ1 ﺔﺤﺘﻓGen2 x16 PCI Express دﺪﻋ1 ﺔﺤﺘﻓPCI دﺪﻋ2 ﺔﺤﺘﻓPCI دﺪﻋ2

تﺎﺤﺘﻔﻟا

A880GU3Z/A880GZ

47

A880GZ A880GU3Z

ﺬﻔﻨﻣSATA دﺪﻋ4 ﺬﻔﻨﻣSATA دﺪﻋ4

ﺔﻴﻣﺎﻣﻷا ﺔﺡﻮ ﻠﻟا ﺬﻔﻨﻣ دﺪﻋ1 ﺔﻴﻣﺎﻣﻷا ﺔﺡﻮ ﻠﻟا ﺬﻔﻨﻣ دﺪﻋ1

ﻲﻣﺎﻣﻷا تﻮﺼﻟا ﺬﻔ ﻨﻣ دﺪﻋ1 ﻲﻣﺎﻣﻷا تﻮﺼﻟا ﺬﻔ ﻨﻣ دﺪﻋ1

جﺮﺥ ﺬﻔﻨﻣS/PDIF دﺪﻋ1 جﺮﺥ ﺬﻔﻨﻣS/PDIF دﺪﻋ1

ﺔیﺰآﺮﻤﻟا ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺡو ﺔﺡوﺮﻣ ﺔﻠﺹو دﺪﻋ1 ﺔیﺰآﺮﻤﻟا ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺡو ﺔﺡوﺮﻣ ﺔﻠﺹو دﺪﻋ1

ا ﺔﺡوﺮﻣ ﺔﻠﺹومﺎﻈﻨﻟ دﺪﻋ1 مﺎﻈﻨﻟا ﺔﺡوﺮﻣ ﺔﻠﺹو دﺪﻋ1

ﺢﺴﻣ ﺔﻠﺹوCMOS دﺪﻋ1 ﺢﺴ ﻣ ﺔﻠﺹوCMOS دﺪﻋ1

ﺬﻔﻨﻣUS B 2.0 دﺪﻋ2 ﺬﻔﻨﻣUSB 2.0 دﺪﻋ2 ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻣ)24سﻮﺏد( دﺪﻋ1 ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻣ)24سﻮﺏد( دﺪﻋ1 ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻣ)4سﻮ ﺏد( دﺪﻋ1 ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻣ)4سﻮ ﺏد( دﺪﻋ1

ﺬﻔﻨﻣ ﺔﻜﻠﻬﺘﺴﻣ ﺖﺤﺗ ﺮﻤﺡﻷا دﺪﻋ1 ﺬﻔﻨﻣ ﺔﻜﻠﻬﺘﺴﻣ ﺖﺤﺗ ﺮﻤﺡﻷا دﺪﻋ1

ﺔﻌﺏﺎﻃ ﺬﻔﻨﻣ دﺪﻋ1 ﺔﻌﺏﺎﻃ ﺬﻔﻨﻣ دﺪﻋ1

ﻲﻠﺴﻠﺴﺗ ﺬﻔ ﻨﻣ دﺪﻋ1 ﻲﻠﺴﻠﺴﺗ ﺬﻔ ﻨﻣ دﺪﻋ1

ﺬﻓﺎﻨﻤﻟا ﻰﻠﻋ ﺢﻄ ﺳ

ﺔﺡﻮﻠﻟا

ﺢﻴﺗﺎﻔﻣ ﺔﺡﻮﻟ / سوﺎﻣPS/2 دﺪﻋ1

ﺬﻓﺎﻨﻣHDMI دﺪﻋ1

ﺬﻓﺎﻨﻣVG A دﺪﻋ1

ﺬﻓﺎﻨﻣDVI- D دﺪﻋ1

ﺔﻴﻠﺤﻣ لﺎﺼﺗا ﺔﻜﺒﺵ ﺬﻔﻨﻣ دﺪﻋ 1

ﺬﻓﺎﻨﻣUSB 2.0 دﺪﻋ4

تﻮﺹ ﺲﺒﻘﻣ دﺪﻋ3

ﺢﻴﺗﺎﻔﻣ ﺔﺡﻮﻟ / سوﺎﻣPS/2 دﺪﻋ1

ﺬﻓﺎﻨﻣHDMI دﺪﻋ1

ﺬﻓﺎﻨﻣVG A دﺪﻋ1

ﺬﻓﺎﻨﻣDVI- D دﺪﻋ1

ﺔﻴﻠﺤﻣ لﺎﺼﺗا ﺔﻜﺒﺵ ﺬﻔﻨﻣ دﺪﻋ 1

ﺬﻓﺎﻨﻣ2.0US B(SB850 ﻦﻣ ﻞﺒﻗ ) دﺪﻋ2

ﺬﻓﺎﻨﻣSB3.0U(ASM104 2 ﻦﻣ ﻞﺒﻗ ) دﺪﻋ2

تﻮﺹ ﺲﺒﻘﻣ دﺪﻋ3

ﺬﻓﺎﻨﻡ ﻞﺧد/جﺮﺧ

ﺔﺡﻮﻠﻟا ﺔﻴﻔﻠﺨﻟا

200 ﻢﻣ )ضﺮﻋ (X 244 ﻢﻣ)عﺎﻔﺗرا( 200 ﻢﻣ)ضﺮﻋ (X 244 ﻢﻣ)عﺎﻔﺗرا(

ﻢﺠﺡ ﺔﺡﻮﻠﻟا

ﺔﻴﻨﻘ ﺗ ﻢﻋﺪﺗRAID 0 / 1 / 5 / 10

ﺔﺹﺎﺥ ﺎیاﺰﻣ

Windows XP / Vista / 7

ﻆﻔﺘﺤﺗBiostar وأ رﺎﻄﺥﺈﺏ ﻞﻴﻐﺸﺗ مﺎﻈﻥ يﻷ ﻢﻋﺪﻟا ﺔﻟازإ وأ ﺔﻓﺎﺿإ ﻲﻓ ﺎﻬﻘﺤﺏ

رﺎﻄﺥإ نوﺪﺏ.

Windows XP / Vista / 7

ﻆﻔﺘﺤﺗBiostar وأ رﺎﻄﺥﺈﺏ ﻞﻴﻐﺸﺗ مﺎﻈﻥ يﻷ ﻢﻋﺪﻟا ﺔﻟازإ وأ ﺔﻓﺎﺿإ ﻲﻓ ﺎﻬﻘﺤﺏ

رﺎﻄﺥإ نوﺪﺏ.

ﻢﻋد ﺔﻤﻈﻥأ ﻞﻴﻐﺸﺘﻟا

Motherboard Manual

48

JAPANESE

A880GU3Z A880GZ

CPU

Socket AM3+ AMD Sempron/Athlon II/Phenom II/FX プロセッサ AMD 64アーキテクチャでは、32ビットと64ビット計

算が可能ですハイパートランスポート 3.0とクールアンドクワイアットをサポートします

(最高のワット : 125W)

Socket AM3+ AMD Sempron/Athlon II/Phenom II/FX プロセッサ AMD 64アーキテクチャでは、32ビットと64ビット計

算が可能ですハイパートランスポート 3.0とクールアンドクワイアットをサポートします

(最高のワット : 125W)

FSB

5.2 GT/sのバンド幅までハイパートランスポート3.0 をサポートします

5.2 GT/sのバンド幅までハイパートランスポート3.0

をサポートします

チップセット

AMD 880G AMD SB850

メインメモリ

DDR3 DIMMスロット x 2 最大メモリ容量8GB 各DIMMは 512 MB & 1GB/2GB/4GB DDR3をサポートデュアルチャンネルモードDDR3メモリモジュール DDR3 800/1066/1333/1600(OC)/1866(OC) をサポート登録済みDIMMとECC DIMMはサポートされません

Super I/O

ITE 8728

もっとも一般に使用されるレガシーSuper I/O機能を採用しています。低ピンカウントインターフェイス環境コントロールイニシアチブ、

H/Wモニター ITE の「スマートガーディアン」機能

ITE 8728

もっとも一般に使用されるレガシーSuper I/O機能を採用しています。低ピンカウントインターフェイス環境コントロールイニシアチブ、

H/Wモニター ITE の「スマートガーディアン」機能

グラフィックス

AMD 880Gチップセットに統合最大の共有ビデオメモリは512MBです

DVI/HDMI/HDCP/UVD2 のサポート

AMD 880Gチップセットに統合最大の共有ビデオメモリは512MBです DVI/HDMI/HDCP/UVD2 のサポート

SATA 3

統合シリアルATA コントローラ最高6Gb/秒のデータ転送速度 SATAバージョン3.0仕様に準拠。

統合シリアルATA コントローラ最高6Gb/秒のデータ転送速度

SATAバージョン3.0仕様に準拠。

LAN

Realtek RTL 8111E 10 / 100 / 1000 Mb/秒のオートネゴシエーション半/全二重機能

HDオーディ

オのサポー

ト

ALC662

5.1チャンネルオーディオアウトハイデフィニションオーディオのサポート

ALC662

5.1チャンネルオーディオアウトハイデフィニションオーディオのサポート

USB3.0 ASM1042 N/A

PCI Express Gen2 x16スロット x1 PCI Express Gen2 x16スロット x1

スロット

PCIスロット x2 PCIスロット x2

A880GU3Z/A880GZ

49

A880GU3Z A880GZ

SATAコネクタ x4 SATAコネクタ x4 フロントパネルコネクタ x1 フロントパネルコネクタ x1 フロントオーディオコネクタ x1 フロントオーディオコネクタ x1

S/PDIFアウトコネクタ x1 S/PDIFアウトコネクタ x1 CPUファンヘッダ x1 CPUファンヘッダ x1 システムファンヘッダ x1 システムファンヘッダ x1 CMOSクリアヘッダ x1 CMOSクリアヘッダ x1 USB 2.0コネクタ x2 USB 2.0コネクタ x2

電源コネクタ (24 ピン) x1 電源コネクタ (24 ピン) x1 電源コネクタ (4ピン) x1 電源コネクタ (4ピン) x1 消費者IR コネクタ x1 消費者IR コネクタ x1 プリンタポートコネクタ x1 プリンタポートコネクタ x1

オンボード

コネクタ

シリアルポートコネクタ x1 シリアルポートコネクタ x1

背面パネル

I/O

PS/2キーボード / マウス x1 HDMIポート x1 VGAポート x1 DVI-Dポート x1 LANポート x1 USB 2.0ポート(で SB850) x2 USB 3.0ポート (で ASM1042) x2 オーディオジャック x3

PS/2キーボード / マウス x1 HDMIポート x1 VGAポート x1 DVI-Dポート x1 LANポート x1 USB 2.0ポート x4

オーディオジャック x3

ボードサイ

ズ

200 mm (幅) X 244 mm (高さ) 200 mm (幅) X 244 mm (高さ)

特殊機能 RAID 0 / 1 / 5 / 10 のサポート RAID 0 / 1 / 5 / 10 のサポート

OSサポート

Windows XP / Vista / 7 Biostarは事前のサポートなしにOSサポートを追加または削除する権利を留保します。

2011/07/07

Biostar A880GU3Z Setup Manual

Specifications and Main Features

Frequently Asked Questions

User Manual