Biostar A870U3, A870 Owner's Manual

A870U3/A870 Setup Manual

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.

Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.

Dichiar azione di co nform ità
sintetica

Ai sensi dell’art. 2 comma 3 del D.M.
275 del 30/10/2002

Si dichiara che questo prodotto è
conforme alle normative vigenti e
soddisfa i requisiti essenziali richiesti
dalle direttive

2004/108/CE, 2006/95/CE e
1999/05/CE

quando ad esso applicabili

Short De clar ation of c onformity

We declare this product is complying
with the laws in force and meeting all
the essential requirements as specified
by the directives

2004/108/CE, 2006/95/CE and
1999/05/CE

whenever these laws may be applied

Table of Contents

Chapter 1: Introduction ........................................ 1

1.1 Before You Start ................................................................................ 1

1.2 Package Checklist............................................................................. 1

1.3 Motherboard Features...................................................................... 2

1.4 Rear Panel Connectors ..................................................................... 3

1.5 Motherboard Layout......................................................................... 4

Chapter 2: Hardware Installation .......................... 5

2.1 Installing Central Processing Unit (CPU)....................................... 5

2.2 FAN Headers...................................................................................... 7

2.3 Installing System Memory ................................................................ 8

2.4 Connectors and Slots....................................................................... 10

Chapter 3: Headers & Jumpers Setup .................. 13

3.1 How to Setup Jumpers .................................................................... 13

3.2 Detail Settings.................................................................................. 13

Chapter 4: RAID Functions .................................. 17

4.1 Operating System............................................................................ 17

4.2 Raid Arrays...................................................................................... 17

4.3 How RAID Works............................................................................. 17

Chapter 5: Useful Help ........................................ 21

5.1 Driver Installation Note.................................................................. 21

5.2 Software............................................................................................ 22

5.3 Extra Information............................................................................ 26

5.4 AMI BIOS Beep Code....................................................................... 28

5.5 Troubleshooting............................................................................... 29

Appendix: SPEC In Other Languages ................... 30

German.................................................................................................................. 30

French .................................................................................................................... 32

Italian ..................................................................................................................... 34

Spanish ................................................................................................................... 36

Portuguese ............................................................................................................ 38

Polish...................................................................................................................... 40

Russian ................................................................................................................... 42

Arabic..................................................................................................................... 44

Japane se ................................................................................................................ 46

CHAPTER 1: INTRODUCTION

A870U3/A870

1.1 B

EFORE YOU START

Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:

 Prepare a dry and stable working environment with

sufficient lighting.

 Always disconnect the computer from power outlet

before operation.

 Before you take the motherboard out from anti-static

bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.

 Avoid touching the components on motherboard or the

rear side of the board unless necessary. Hold the board
on the edge, do not try to bend or flex the board.

 Do not leave any unfastened small parts inside the

case after installation. Loose parts will cause short
circuits which may damage the equipment.

 Keep the computer from dangerous area, such as heat

source, humid air and water.

 The operating temperatures of the computer should be

0 to 45 degrees Celsius.

1.2 PACKAGE CHECKLIST

Serial ATA Cable X 2
Serial ATA Power Cable X 1
Rear I/O Panel for ATX Case X 1
User’s Manual X 1
Fully Setup Driver CD X 1
USB 2.0 Cable X1 (optional)
S/PDIF out Cable X 1 (optional)

Note : The package contents may be different due to area or your motherboard version.

1

Motherboard Manual

1.3 MOTHERBOARD FEATURES

A870U3 A870

CPU

FSB

Chipset

Super I/O

Main
Memory

SATA 3

LAN

Sound

Socket AM3
AMD Phenom II/Athlon II/Sempron processors

AMD 64 Architecture enables 32 and 64 b it
computing

Supports Hyper Transport 3.0 and Cool=n=Quiet
(Maximum Watt: 125W)

Support HyperTransport 3.0

Supports up to 5.2 GT/s Bandwidth

AMD 870

AMD SB850

ITE 8728
Prov ides the most common ly used legacy Super

I/O functionality
Low Pin Count Interface

En viro nm en t Co nt rol in it iatives
H/W Mon ito r
ITE's "S mart Guard ian " funct ion

DDR3 DIMM Slots x 4
Max Memory Capacity 16GB

Each DIMM supports 512MB/1GB/2GB/
4GB DDR3
Dual Cha nnel Mode DDR3 me mory mo du le

Supports DDR3 800 / 1066 / 1333
Supports DDR3 1600 (OC)

Register ed D IMM and ECC DIMM is not
supported

Integrated Serial ATA Controller

Data transfer rates up to 6 Gb/s
SATA Vers io n 3 .0 spe c if ic at ion co mp liant

Realtek RTL 8111E
10 / 100 / 1000 Mb/s auto negotiation
Half / Full duplex capability

ALC662

5.1 channels audio out

High Definition Audio

PCI Express Gen2 x16 slot x2 PCI Express Gen2 x16 slot x2
PCI Express Gen2 x 1 slot x2 PCI Express Gen2 x 1 slot x2 Slots

PCI slot x2 PC I slot x2

Socket AM3
AMD Phenom II/Athlon II/Sempron processors

AMD 64 Architecture enables 32 and 64 b it
computing

Supports Hyper Transport 3.0 and Cool=n=Quiet
(Maximum Watt: 125W)

Support HyperTransport 3.0

Supports up to 5.2 GT/s Bandwidth

AMD 870

AMD SB850

ITE 8728
Prov ides the most com mon ly used legacy Supe r

I/O functionality
Low Pin Count Interface

En viro nm en t Co nt rol in it iatives
H/W Mon ito r
ITE's "S mart Guard ian " funct ion

DDR3 DIMM Slots x 4
Max Memory Capacity 16GB

Each DIMM supports 512MB/1GB/2GB/
4GB DDR3
Dual Cha nnel Mode DDR3 me mory mo du le

Supports DDR3 800 / 1066 / 1333
Supports DDR3 1600 (OC)

Register ed D IMM and ECC DIMM is not
supported

Integrated Serial ATA Controller

Data transfer rates up to 6 Gb/s
SATA Vers io n 3 .0 spe c if ic at ion co mp liant

Realtek RTL 8111E
10 / 100 / 1000 Mb/s auto negotiation
Half / Full duplex capability

ALC662

5.1 channels audio out

High Definition Audio

2

A870U3 A870

SATA Connector x6 SATA Connector x6
Front Panel Connector x1 Front Panel Connector x1
Front Audio Connector x1 Front Audio Connector x1
S/PDIF Out Connector x1 S/PDIF Out Connector x1

On Board
Connector

Back Panel
I/O

Board Size 205 mm(W) x 305 mm(L) 205 mm(W) x 305 mm(L)
Special
Features

OS Support

CPU Fan Header x1 CPU Fan Header x1
System Fan Header x1 System Fan Header x1
CMOS clear Header x1 CMOS clear Header x1
USB 2.0 Connector x2 USB 2.0 Connector x2
Power Connector (24pin) x1 Power Connector (24pin) x1
Power Connector (4pin) x1 Power Connector (4pin) x1
Printer Po rt Connecto r x 1 Printer Port Connector x1
PS/2 Keyboard x1
PS/2 Mous e x1
Serial Port x1
LAN Port x1
USB 2.0 Port (by SB850) x2
USB 3.0 Port (by ASM1042) x2
Audio Jack x3

RAID 0 / 1 / 10 / 5 support RAID 0 / 1 / 10 / 5 support

Windows XP / Vista / 7
Biostar reserves the right to add or remove
support for any OS With or without notice.

PS/2 Keyboard x1
PS/2 Mous e x1
Serial Port x1
LAN Port x1
USB 2.0 Port x4
Audio Jack x3

Windows XP / Vista / 7
Biostar reserves the right to add or remove
support for any OS With or without notice.

A870U3/A870

1.4 REAR PANEL CONNECTORS

PS/2
Mouse

COM1

PS/2
Keyboard

(A870U3)

USB2.0X2

(A870)

NOTE: Since the audio chip supports High Definition Audio Specification, the function of each

audio jack can be defi ned by software. The input / output function of each audio jack listed
above represents the default setting. However, when connecting external microphone to
the audio port, please use the Line In (blue) and Mic In (Pink) audio jack.

NOTE: USB3.0 ports are backward compatible with USB2.0/USB1.X devices. USB3.0 is

controlled by Asmedia ASM1042, but, USB2.0/USB1.X is controlled by SB850.

USB2 .0X2USB3.0X2

LAN

Line In/
Surround

Line Out

Mic In 1/
Bass/ Center

3

Motherboard Manual

1.5 MOTHERBOARD LAYOUT

KBMS1

ATXPWR2

COM 1

USB3_0

USB2_0

R J45US B1

AUDIO1

(A870U 3)

(A870)

JUSBV1

ATXPWR1

PEX1_1

PEX16_1

AMD

870

CPU_FAN1

Socket AM 3

DDR3_A 1

DDR3_A 2

DDR3_B 2

DDR3_B 1

JCMOS1

BIOS

4

LAN

Codec

F_AUDIO1

Note: represents the 1■

JSPDI FOU T1

PEX1_2

J_ PR I N T 1

PEX16_2

PCI1

PCI2

JUSBV2

st

F_USB1F_USB2

pin.

BAT

Super I/O

SYS_FA N1

AMD

SB850

SATA1

SATA2

PAN EL 1

SATA3

SATA4

SATA5

SATA6

CHAPTER 2: HARDWARE INSTALLATION

A870U3/A870

2.1 I

NSTALLING CENTRAL PROCESSING UNIT (CPU)

Step 1: Pull the lever toward direction A from the socket and then raise the

lever up to a 90-degree angle.

Step 2: Look for the white triangle on socket, and the gold triangle on

CPU should point towards this white triangle. The CPU will fit only
in the correct orientation.

5

Motherboard Manual

Step 3: Hold the CPU down firmly, and then close the lever toward direct

B to complete the installation.

Step 4: Put the CPU Fan on the CPU and buckle it. Connect the CPU

FAN power cable to the CPU_FAN1. This completes the
installation.

6

A870U3/A870

2.2 FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.

CPU_FAN1: CPU Fan Header

4

1

SYS_FAN1: System Fan Header

Pin

Assignment

1 Ground
2 +12V
3

FAN RPM r at e
sense

4 Smart Fan

Control (By Fan)

Pin Assignment

1 Ground
2 +12V
3

FAN RPM
rate sense

31

Note:

CPU_FAN1, SYS_FAN1/2 support 4-pin and 3-pin head connectors. When connecting
with wires onto connectors, please note that the red wire is the positive and should be
connected to pin#2, and the black wire is Ground and should be connected to GND.

7

Motherboard Manual

2.3 INSTALLING SYSTEM MEMORY

A. DDR3 Modules

DDR 3_A1

DDR 3_A2

DDR 3_B1

DB2DR 3_

1. Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.

2. Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.

8

B. Memory Capacity

A870U3/A870

DIMM Socket

Location

DDR3_A1 512MB/1GB/2GB/4GB

DDR3_A2 512MB/1GB/2GB/4GB

DDR3_B1 512MB/1GB/2GB/4GB

DDR3_B2 512MB/1GB/2GB/4GB

DDR3 Module

Total M em ory

Size

Max is 16GB.

C. Dual Channel Memory installation

Please refer to the following requirements to activate Dual Channel function:

Install memory module of the same density in pairs, shown in the table.

Dual Channel Status

Enabled O X O X

Enabled X O X O

Enabled O O O O

(O: memory i nstalled; X: memory not installed)

The DRAM bus width of the memory module must be the same (x8 or
x16)

DDR3_A1

DDR3_A2 DDR3_B1 DDR3_B2

9

Motherboard Manual

2.4 CONNECTORS AND SLOTS

SATA1~SATA6: Serial ATA Connectors

The motherboard has a PCI to SATA Controller with 6 channels SATA interface,
it satisfies the SATA 3.0 spec and with transfer rate of 6.0Gb/s.

ATXP W R2: AT X Power Source Connector

This connector provides +12V to CPU power circuit.

41

SATA1 SATA3
SATA2 SATA4

SATA5
SATA6

741

23

Pin

Pin Assignment

1 +12V
2 +12V
3 Ground
4 Ground

Assignment

1 Ground
2 TX+
3 TX­4 Ground
5 RX­6 RX+
7 Ground

10

A870U3/A870

ATXP W R1: AT X Power Source Connector

This connector allows user to connect 24-pin power connector on the AT X
power supply.

13

1

24

Pin Assignment Pin Assignment

13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 Ground 3 Ground
16 PS_ON 4 +5V
17 Ground 5 Ground
18 Ground 6 +5V
19 Ground 7 Ground
20 NC 8 PW_OK
21 +5V 9 Standby Voltage+5V
22 +5V 10 +12V
23 +5V 11 +12V
24 Ground 12 +3.3V

12

Note:

Before you power on the s ystem, please make sure that both ATXPWR1 and ATXPWR2
connectors have been plugged-in.

PCI1/PCI2: Peripheral Component Interconnect Slots

PCI stands for Peripheral Component Interconnect, and it is a bus standard for
expansion cards. This PCI slot is designated as 32 bits.

PCI1

PCI2

11

Motherboard Manual

PEX16_1: PCI-Express Gen2 x16 Slot

- PCI-Express 2.0 compliant.

- Maxi mum theoretical realized bandwidth of 8GB/s simultaneously per

direction, for an aggregate of 16GB/s totally.

- PCI-Express Gen2 supports a raw bit-rate of 5.0Gb/s on the data pins.

PEX16_2: PCI-Express Gen2 x4 Slot

- PCI-Express 2.0 compliant.

- Data transfer bandwidth up to 2GB/s per direction;4GB/s in total.

- PCI-Express Gen2 supports a raw bit-rate of 2.5Gb/s on the data pins.

PEX1_1/PEX1_2: PCI-Express Gen2 x1 Slot

- PCI-Express 2.0 compliant.

- Data transfer bandwidth up to 250MB/s per direction; 500MB/s in total.

PEX1_1

PEX16_1

12

PEX1_2

PEX16_2

A870U3/A870

CHAPTER 3: HEADERS & JUMPERS SETUP

3.1 H

OW TO SETUP JUMPERS

The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.

Pin opened Pin closed Pin1-2 closed

3.2 DETAIL SETTINGS

PANEL1: Front Panel Header

This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and
speaker connection. It allows user to connect the PC case’s front panel switch
functions.

D

E

L

_

P

R

W

O

n

/

O

f

f

-

+

916
1

+

8

-

+

R

S

S

P

K

T

D

E

L

H

Pin Assignment Function Pin Assignment Function

1 +5V 9 N/A
2 N/A 10 N/A
3 N/ A 11 N/A N/A
4 Speaker
5 HDD LED (+) 13 Power LED (+)
6 HDD LED (-)
7 Ground 15 Power button
8 Reset control

Speaker
Connector

Hard drive
LED

Reset button

12 Power LED (+)

14 Power LED (-)

16 Ground

N/A

Power LED

Power-on button

13

Motherboard Manual

JCMOS1: Clear CMOS Header

Placing the jumper on pin2-3 allows user to restore the BIOS safe setting and
the CMOS data. Please carefully follow the procedures to avoid damaging the
motherboard.

※ Clear CMOS Procedures:

1. Remove AC power line.

2. Set the jumper to “Pin 2-3 close”.

3. Wait for five seconds.

4. Set the jumper to “Pin 1-2 close”.

5. Power on the AC.

6. Reset your desired password or clear the CMOS data.

3

1

3

1

Pin 1-2 Close:

Normal Operation
(default).

3

1

Pin 2-3 Close:

Clear CMOS data.

F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel

These headers allow user to connect additional USB cable on the PC front panel,
and also can be connected with internal USB devices, like USB card reader.

F_USB1 F_USB2

2

10

1

14

9

Pin

Assignment

1 +5V (fused)
2 +5V (fused)
3 USB­4 USB­5 USB+
6 USB+
7 Ground
8 Ground
9 Key

10 NC

A870U3/A870

JUSBV1/JUSBV2: Power Source Headers for USB Ports

Pin 1-2 Close:

JUSBV1: +5V for USB ports at USB3_0 (USB2_0)/RJ45USB1.
JUSBV2: +5V for USB ports at F_USB1/F_USB2.

Pin 2-3 Close:

JUSBV1: +5V STB for USB ports at USB3_0 (USB2_0)/RJ45USB1.
JUSBV2: +5V STB for USB ports at F_USB1/F_USB2.

3

1

JUSBV1

JUSBV2

13

Pin 1-2 close

13

Pin 2-3 close

F_AUDIO1: Front Panel Audio Header

This header allows user to connect the front audio output cable with the PC front
panel. This header allows only HD audio front panel connector; AC’97 connector
is not acceptable

131

2

1

10

Pin Assignment

1 Mic Left in
2 Ground
3 Mic Right in
4 GPIO
5 Right line in
6 Jack Sense
7 Front Sense
8 Key
9 Left line in

10 Jack Sense

9

15

Motherboard Manual

JSPDIFOUT1: Digital Audio-out Connector

This connector allows user to connect the PCI bracket SPDIF output header.

J_PRINT1: Printer Port Connector

This header allows you to connector printer on the PC.

Pin

Assignment

1 +5V
2 SPDIF_OUT
3 Ground

31

16

2

1

Pin Assignment Pin Assignment

1 -Strobe 14 Ground

2 -ALF 15 Data 6

3 Data 0 16 Ground

4 -Error 17 Data 7

5 Data 1 18 Ground

6 -Init 19 -ACK

7 Data 2 20 Ground

8 -Scltin 21 Busy

9 Data 3 22 Ground

10 Ground 23 PE

11 Data 4 24 Ground

12 Ground 25 SCLT

13 Data 5 26 Key

26

25

CHAPTER 4: RAID FUNCTIONS

A870U3/A870

4.1 O

Supports Windows XP, Windows Vista, and Windows 7.

PERATING SYSTEM

4.2 RAID ARRAYS

RAID supports the following types of RAID arrays:

RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for

many applicat ions.

RAID 1: RAID 1 defines techniques for mirroring data.

RAID 10: RAID 10 combines the techniques used in RAID 0 and RAID 1.

RAID 5: RAID 5 provides fault tolerance and better utilization of disk capac ity.

4.3 HOW RAID WORKS

RAID 0:

The controller “stripes” data across multiple drives in a RAID 0 array system. It breaks
up a lar ge file into sma ller blocks and performs disk reads and writes across multip le
drives in parallel. The size of each block is determined by the stripe size parameter,
which you set durin g the creation of the RAID set based on the system environment. This
technique reduces overall disk access time and offers high bandwidth.

Features and Benefits

 Drives: Minimum 2, and maximum is up to 6 or 8. Depending on the

platform.

 Uses: Intended for non-critical data requiring high data throughput, or any

environment that does not require fault tolerance.

 Benefits: provides increased data throughput, especially for large files. No

capacity loss penalty for parity.

 Drawbacks: Does not deliver any fault tolerance. If any drive in the array

fails, all data is lost.

 Fault Tolerance: No.

Block 1
Blo ck 3
Blo ck 5

Block 2
Blo ck 4
Blo ck 6

17

Motherboard Manual

RAID 1:

Every read and write is actua lly carried out in parallel across 2 disk drives in a RAID 1
array system. The mirrored (backup) copy of the data can reside on the same disk or on a
second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the
active volume or drive is corrupted or becomes unavailable because of a hardware failure.

RAID techniques can be applied for high-availability solut ions, or as a form of automatic
backup that eliminates tedious manual backups to more expensive and less reliable
media.

Features and Benefits

 Drives: Minimum 2, and maximum is 2.
 Uses: RAID 1 is ideal for small databases or any other application that

requires fault tolerance and minimal capacity.

 Benefits: Provides 100% data redundancy. Should one drive fail, the

controller switches to the other drive.

 Drawbacks: Requires 2 drives for the storage space of one drive.

Performance is impaired during drive rebuilds.

 Fault Tolerance: Yes .

18

Block 1
Block 2
Block 3

Block 1
Block 2
Block 3

A870U3/A870

RAID 10:

RAID 1 drives can be stripped using RAID 0 techniques. Resulting in a RAID 10
solution for improved resiliency, performance and rebuild performance.

Features and Benefits

 Drives: Minimum 4, and maximum is 6 or 8, depending on the platform.
 Benefits: Optimizes for both fault tolerance and performance, allowing for

automatic redundancy. May be si multaneously used with other RAID levels
in an array, and allows for spare disks.

 Drawbacks: Requires twice the available disk space for data redundancy,

the same as RAID level 1.

 Fault Tolerance: Yes .

Block 1
Block 3
Block 5

Block 1
Block 3
Block 5

Block 2
Block 4
Block 6

Block 2
Block 4
Block 6

19

Motherboard Manual

RAID 5:

RAID 5 stripes both data and parity information across three or more drives. It writes
data and parity blocks across all the drives in the array. Fault tolerance is maintained by
ensuring that the parity information for any given block of data is placed on a different
drive from those used to store the data itself.

Features and Benefits

 Drives: Mini mum 3.
 Uses: RAID 5 is recommended for transaction processing and general

purpose service.

 Benefits: An ideal combination of good performance, good fault tolerance,

and high capacity and storage efficiency.

 Drawbacks: Individual block data transfer rate same as a single disk. Write

performance can be CPU intensive.

 Fault Tolerance: Yes.

Disk 1

DATA 1

DATA 3

PA RI T Y

DATA 7
DATA 9

PA RI T Y

20

Disk 2

DATA 2

PA RI T Y
DATA 5
DATA 8
PA RI T Y

DATA 11

Disk 3

PA RI T Y
DATA 4
DATA 6

PA RI T Y
DATA 10
DATA 12

CHAPTER 5: USEFUL HELP

A870U3/A870

5.1 D

RIVER INSTALLATION NOTE

After you installed your operating system, please insert the Fully Setup
Driver CD into your optical drive and install the driver for better system
performance.

You will see the following window after you insert the CD

The setup guide will auto detect your motherboard and operating system.

Note:

If this window didn’t show up after you insert the Driver CD, please use file browser to
locate and execute the file SETUP.EXE under your optical drive.

A. Driver Installation

To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.
Click on each device driver to launch the installation program.

B. Software Installation

To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title
to launch the installation program.

C. Manual

Aside from the paperback manual, we also provide manual in the Driver
CD. Click on the Manual icon to browse for available manual.

Note:

You will need Acrobat Reader to open the manual file. Please download the latest version
of Acrobat Reader so ftware from
http://www.adobe.com/produ cts/acrobat/readstep2.html

21

Motherboard Manual

e

5.2 SOFTWARE

Installing Software

1. Insert the Setup CD to the optical drive. The drivers installation program
would appear if the Autorun function has been enabled.

2. Select Software In stallation, and then click on the respective software
title.

3. Follow the on-screen instructions to complete the installation.

Launching Software

After the installation process, you will see the software icon “eHOT Line” /
“BIOS Update” appears on the desktop. Double-click the icon to launch the
utility.

eHot-Line (Optional)

eHot-Line is a convenient utility that helps you to contact with our
Tech-Support system. This utility will collect the system information which is
useful for analyzing the problem you may have encountered, and then send
these information to our tech-support department to help you fix the problem.

Before you use this uti lity, please set Outlook Express as your default e-mail client application program.

re pr esen ts i mpor ta nt

*

information that you
must provide. Without
this inf ormation, you may
not be able to send out
the mail.

This block will show
the information which
would be collected in
the mail.

Describe conditi on

*

of your system.

Select your area or

*

the area cl os e to you.

Provide the e-mail
address t hat you would
like to s end the copy to.

Pr ovid e the na me of

*

the memor y module
manufacturer.

Provide the name of
th e powe r su ppl y
manufacturer and the
model no.

Se nd th e mai l out .

Sav e the se info rmati on to a .t xt fi l

Exit this dialog.

22

A870U3/A870

After filling up this information, click “Send”
to send the mail out. A warning dialog would
appear asking for your confirmation; click

“Send” to confirm or “Do Not Send” to cancel.

If you want to save this information to a .txt file, click “Save As…” and then you
will see a saving dialo g appears asking you to enter file name.

Enter the file name and then click
“Save”. Your system information

will be saved to a .txt file.

Open the saved .txt file, you will see
your system information including
motherboard/BIOS/CPU/video/
device/OS information. This
information is also concluded in the
sent mail.

We will not share customer’s data with any other third parties,
so please feel free to provide your system information while using
eHot-Line service.

If you are not using Outlook Express as your default e-mail client
application, you may need to save the system information to a .txt file
and send the file to our tech support with other e-mail application.
Go to the following web

http://www.biostar.com.tw/app/en-us/about/contact.php for getting

our contact information.

23

Motherboard Manual

BIOS Update

BIOS Update is a convenient utility which allows you to update your
motherboard BIOS under Windows system.

AWARD BIOS AMI BIOS

Clear CMOS function

(Only for AWARD BIOS)

Show current BIOS information

Save cur rent BIOS

to a .bin file

Update BIOS

with a BIOS file

<Backup BIOS>

Once click on this button, the saving

dialog will show. Choose the

position to save file and enter file

name. (We recommend that the file

name should be English/number

and no longer than 7 characters.)

Then click Save.

24

A870U3/A870

<Update BIOS>

Before doing this, please download the proper BIOS file from the website.

For AWARD BIOS, update BIOS procedure
should be run with Clear CMOS function, so
please check on Clear CMOS first.

Then click Update BIOS button, a
dialog will show for asking you backup
current BIOS. Click Yes for BIOS
backup and refer to the Backup BIOS
procedure; or click No to skip this
procedure.

After the BIOS Backup procedure, the
open dialog will show for requesting the
BIOS file which is going to be updated.
Please choose the proper BIOS file for
updating, then click on Open.

The utility will update BIOS with the
proper BIOS file, and this process may
take minutes. Please do not open any
other applications during this process.

After the BIOS Update process, click on
OK to restart the system.

While the system boots up and the full screen logo shows, press <Delete>
key to enter BIOS setup.

In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. BIOS Update is completed.

All the information and content above about the software are subject to be changed
without notice. For better performance, the software is being continuously updated.
The information and pictures described above are for your reference only. The actual
information and settings on board may be slightly different from this manual.

25

Motherboard Manual

5.3 EXTRA INFORMATION

CPU Overheated

If the system shutdown automatically after power on system for
seconds, that means the CPU protection function has been activated.

When the CPU is over heated, the motherboard will shutdown
automatically to avoid a damage of the CPU, and the system may not
power on again.

In this case, please double check:

1. The CPU cooler surface is placed evenly with the CPU surface.

2. CPU fan is rotated normally.

3. CPU fan speed is fulfilling with the CPU speed.

After confirmed, please follow steps below to relief the CPU protection
function.

1. Remove the power cord from power supply for seconds.

2. Wait for seconds.

3. Plug in the power cord and boot up the system.

Or you can:

1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)

2. Wait for seconds.

3. Power on the system again.

26

BIO-Flasher

BIO-Flasher is a BIOS flashing utility providing you an easy and simple way to
update your BIOS via USB pen drive or floppy disk.

The BIO-Flasher is built in the BIOS chip. To enter the utility, press <F12>
during the Power-On Self Tests (POST) procedure while booting up.

Updating BIOS with BIO-Flasher

1. Go to the website to download the latest BIOS file for the motherboard.

2. Then, save the BIOS file into a USB pen drive or a floppy disk.

3. Insert the USB pen drive or the floppy disk that contains the BIOS file to the
USB port or the floppy disk drive.

4. Power on or reset the computer and then
press <F12> during the POST process.
A select dialog as the picture on the right
appears.
Select the device contains the BIOS file and
press <Enter> to enter the utility.

A870U3/A870

5. T he utility will show the BIOS
files and their respective
information. Select the proper
BIOS file and press <Enter>
then <Y> to perform the BIOS
update process.

6. After the update process, the utility will ask you to reboot the system.
Press <Y> to proceed. BIOS update completes.

z This utility only allows storage device with FAT32/16 format and single

parti tion.

z Shutting down or resetting the system while updating the B IOS will lead to

system boot failure.

27

Motherboard Manual

5.4 AMI BIOS BEEP CODE

Boot Block Beep Codes

Number of Beeps Description

1 No media present. (Insert diskette in floppy drive A:)

2

3 Insert next diskette if multiple diskettes are used for recovery
4 Flash Programming successful
5 File read error

7 No Flash EPROM detected
10 Flash Erase error
11 Flash Program error
12 “AMIBOOT.ROM” file size error

13

POST BIOS Beep Codes

Number of Beeps Description

1 Memory refresh timer error

3 Base memory read/write test error

6 Keyboard controller BAT command failed

7 General exception error (processor exception interrupt error)

8 Display memory error (system video adapter)

“AMIBOOT.ROM” file not found in root directory of diskette in
A:

BIOS ROM image mismatch (file layout does not match
image present in flash device)

Troubleshooting POST BIOS Beep Codes

Number of Beeps Troubleshooting Action

1, 3 Reseat the memory, or replace with known good modules.

Fatal error indicating a serious problem with the system.
Consult your system manufacturer. Before declaring the
motherboard beyond all hope, eliminate the possibility of
interference by a malfunctioning add-in card. Remove all
expansion cards except the video adapter.

6, 7

8

28

z If beep codes are generated when all other expansion

cards are absent, consult your system manufacturer’s
technical support.

z If beep codes are not generated when all other expansion

cards are absent, one of the add-in cards is causing the
malfunction. Insert the cards back into the system one at a
time until the problem happens again. This will reveal the
malfunctioning card.

If the system video adapter is an add-in card, replace or
reseat the
video adapter. If the video adapter is an integrated part of the
system board, the board may be faulty.

5.5 TROUBLESHOOTING

Probable Solution

1. There is no power in the system.
Power LED does not shine; the
fan of the power supply does not
work

2. Indicator light on keyboard does
not shine.

System is inoperative. Keyboard lights
are on, power indicator lights are lit,
and hard drives are running.

System does not boot from a hard disk
drive, but can be booted from optical
drive.

System only boots from an optical
drive. Hard disks can be read,
applications can be used, but system
fails to boot from a hard disk.

Screen message shows “Invalid
Configuration” or “CMOS Failure.”

System cannot boot after user installs a
second hard drive.

A870U3/A870

1. Make sure power cable is
securely plugged in.

2. Replace cable.

3. Contact technical support.

Using even pressure on both ends of
the DIMM, press down firmly until the
module snaps into place.

1. Check cable running from disk to
disk controller board. Make sure
both ends are securely plugged
in; check the drive type in the
standard CMOS setup.

2. Backing up the hard drive is
extremely important. All hard
disks are capable of breaking
down at any time.

1. Back up data and applications
files.

2. Reformat the hard drive.
Re-install applications and data
using backup disks.

Review system’s equipment. Make sure
correct information is in setup.

1. Set master/slave jumpers
correctly.

2. Run SETUP program and select
correct drive types. Call the drive
manufacturers for compatibility
with other drives.

29

Motherboard Manual

APPENDIX: SPEC IN OTHER LANGUAGES

G

ERMAN

A870U3 A870

CPU

FSB

Chipsatz

Super E/A

Arbeitsspeich
er

SATA 3

LAN

HD
Audio-Unters
tützung

Sockel AM3
AMD Phenom II/Athlon II/Sempron Prozessoren
Die AMD 64-Archit ektur unt erstützt eine 32-Bit­und 64-Bit-Datenverarbeitung
Unterstützt Hyper Transport 3.0 und Cool’n’Quiet
(Maximales Watt: 125W)

Unterstützt HyperTransport 3.0 mit einer
Bandbreite von bis zu 5.2 GT/s
AMD 870
AMD SB850
ITE 8728
Biet et die häufig ver wend eten a lten Sup er
E/A-Funktionen.
Low Pin Count-Schnittstelle
Umgebungskontrolle,
Hardware-Überwachung
"Smart Guardian"-Funktion von ITE

DDR3 DIMM-Steckplätze x 4
Max. 16GB Arbeitsspeicher
Jeder DIMM unterstützt 512MB/ 1GB/2GB/
4GB DDR3.
Dual-Kanal DDR3 Speichermodul
Unterstützt DDR3 800 / 1066 / 1333
Unterstützt DDR3 1600 (OC)
registrierte DIMMs. ECC DIMMs werden nicht
unterstützt.

Integrierter Serial ATA-Controller
Datentransferrate b is zu 6 Gb /s
Konform mit d er SATA-Spezif ikation Version 3.0.

Realtek RTL 8111E
10 / 100 / 1000 Mb/s Auto-Negotiation
Halb-/ Vollduplex-Funktion

ALC662

5.1-Kanal-Audioausgabe
Unterstützt High-Definition Audio
PCI Express Gen2 x16 Steckplatz x2 PCI Express Gen2 x16 Steckplatz x2
PCI Express Gen2 x 1-Steckplatz x2 PCI Express Gen2 x 1-Steckplatz x2 Steckplätze
PCI-Steckp latz x2 PCI-Steckp latz x2

Sockel AM3
AMD Phenom II/Athlon II/Sempron Prozessoren
Die AMD 64-Archit ektur unt erstützt eine 32-Bit­und 64-Bit-Datenverarbeitung
Unterstützt Hyper Transport 3.0 und Cool’n’Quiet
(Maximales Watt: 125W)

Unterstützt HyperTransport 3.0 mit einer
Bandbreite von bis zu 5.2 GT/s
AMD 870
AMD SB850
ITE 8728
Biet et die häufig ver wend eten a lten Sup er
E/A-Funktionen.
Low Pin Count-Schnittstelle
Umgebungskontrolle,
Hardware-Überwachung
"Smart Guardian"-Funktion von ITE

DDR3 DIMM-Steckplätze x 4
Max. 16GB Arbeitsspeicher
Jeder DIMM unterstützt 512MB/ 1GB/2GB/
4GB DDR3.
Dual-Kanal DDR3 Speichermodul
Unterstützt DDR3 800 / 1066 / 1333
Unterstützt DDR3 1600 (OC)
registrierte DIMMs. ECC DIMMs werden nicht
unterstützt.

Integrierter Serial ATA-Controller
Datentransferrate b is zu 6 Gb /s
Konform mit d er SATA-Spezif ikation Version 3.0.

Realtek RTL 8111E
10 / 100 / 1000 Mb/s Auto-Negotiation

Halb-/ Vollduplex-Funktion

ALC662

5.1-Kanal-Audioausgabe
Unterstützt High-Definition Audio

30

A870U3 A870

SATA-Anschluss x6 SATA-Anschluss x6
Fronttafelanschluss x1 Fronttafelanschluss x1
Front-Audioanschluss x1 Front-Audioanschluss x1
S/PDIF- Ausgangsanschluss x1 S/PDIF- Ausgangsanschluss x1

Onboard-Ans
chluss

Rückseiten-E
/A

Platinengröße

Sonderfunkti
onen

OS-Unterstüt
zung

CPU-Lüfter-Sockel x1 CPU-Lüfter-Sockel x1
System-Lüfter-Sockel x1 System-Lüfter-Sockel x1
"CMOS lös chen "- So ckel x1 "C MOS löschen"-Socke l x1
USB 2.0-Anschluss x2 USB 2.0-Anschluss x2
Stromanschluss (24-polig) x1 Stromanschluss (24-polig) x1
St romans ch luss (4- pol ig ) x1 St romans ch luss (4- pol ig ) x1
Druckeranschluss Anschluss x1 Druckeranschluss Anschluss x1

PS/2-Tastatur x1
PS/2-Maus x1
Serieller Anschluss x1
LAN-Anschluss x1
USB 2.0-Anschluss (durch SB850 ) x2
USB 3.0-Anschlus
(durch ASM1042) x2
Audioanschluss x3
205 mm (B) X 305 mm (L) 205 mm (B) X 305 mm (L)

Unterstützt RAID 0 / 1 / 10 / 5 Unterstützt RAID 0 / 1 / 10 / 5

Windows XP / Vista / 7
Biostar behält sich das Recht vor, ohne
Ankündigung die Unterstützung für ein
Betriebssystem hinzuzufügen oder zu
entfernen.

PS/2-Tastatur x1
PS/2-Maus x1
Serieller Anschluss x1
LAN-Anschluss x1
USB 2.0-Anschluss x4
Audioanschluss x3

Windows XP / Vista / 7
Biostar behält sich das Recht vor, ohne
Ankündigung die Unterstützung für ein
Betriebssystem hinzuzufügen oder zu
entfernen.

A870U3/A870

31

Motherboard Manual

j

j

FRENCH

A870U3 A870

UC

Bus frontal

Chipset

Super E/S

Mémoire
principale

SATA 3

LAN

Prise en
charg e
aud io HD

32

Socket AM3
Processeurs AMD Phenom II/Athlon II/Sempron
L'architecture AMD 64 permet le calcul 32 et 64
bits
Prend en charge Hyp er Transport 3.0 et
Cool’n’Quiet
(Watt maximum : 125W)
Prend en ch arge Hype r Transp ort 3.0
bande passante de 5.2 GT/s
AMD 870
AMD SB850

ITE 8728
Fournit la fonctionnalité de Super E/S
patrimoniales la plus utilisée.
Int e rf ace à f a ib le co mpte de b roches
Initiatives de contrôle environnementales,
Mon iteur d e mat ériel
Fonction "Gardien intelligent" de l'ITE

Fentes DDR3 DIMM x 4
Capac ité mémoire max ima le de 16 Go
Chaque DIMM prend en charge des DDR3 de 512
Mo et 1Go/2Go/4Go
Module de mémoire DDR3 à mode à double voie
Prend en charge la DDR3 800 / 1066 / 1333
Prend en charge la DDR3 1600 (OC)
Les DIMM à registres et DIMM avec code
correcteurs d'err eurs ne so nt pas prises en
charg e

Contrô leur Serial ATA int ég r é
Taux de transfert jusqu'à 6 Go/s.
Co nfo rme à la spécif icat ion SATA Vers ion 3.0

Realtek RTL 8111E
10 / 100 / 1000 Mb/s négociation auto matique
Half / Full duplex capability
ALC662
Sortie aud io à 5 .1 voies
Prise en charge de l' aud io haut e déf inition
Fente PCI Express Gen2 x16 x2 Fente PCI Express Gen2 x16 x2
Fente PCI Express Gen2 x1 x2 Fente PCI Express Gen2 x1 x2 Fentes
Fente PCI x2 Fente PCI x2

usqu'à une

Socket AM3
Processeurs AMD Phenom II/Athlon II/Sempron
L'architecture AMD 64 permet le calcul 32 et 64
bits
Prend en charge Hyp er Transport 3.0 et
Cool’n’Quiet
(Watt maximum : 125W)
Prend en ch arge Hype r Transp ort 3.0
bande passante de 5.2 GT/s
AMD 870
AMD SB850

ITE 8728
Fournit la fonctionnalité de Super E/S
patrimoniales la plus utilisée.
Int e rf ace à f a ib le co mpte de b roches
Initiatives de contrôle environnementales,
Mon iteur d e mat ériel
Fonction "Gardien intelligent" de l'ITE

Fentes DDR3 DIMM x 4
Capac ité mémoire max ima le de 16 Go
Chaque DIMM prend en charge des DDR3 de 512
Mo et 1Go/2Go/4Go
Module de mémoire DDR3 à mode à double voie
Prend en charge la DDR3 800 / 1066 / 1333
Prend en charge la DDR3 1600 (OC)
Les DIMM à registres et DIMM avec code
correcteurs d'err eurs ne so nt pas prises en
charg e

Contrô leur Serial ATA int ég r é
Taux de transfert jusqu'à 6 Go/s.
Co nfo rme à la spécif icat ion SATA Vers ion 3.0

Realtek RTL 8111E
10 / 100 / 1000 Mb/s négociation auto matique
Half / Full duplex capability
ALC662
Sortie aud io à 5 .1 voies
Prise en charge de l' aud io haut e déf inition

usqu'à une

A870U3 A870

Connecteur SATA x6 Connecteur SATA x6
Connecteur du panneau avant x1 Connecteur du panneau avant x1
Connecteur Audio du panneau avant x1 Connecteur Audio du panneau avant x1
Connecteur de sortie S/PDIF x1 Connecteur de sortie S/PDIF x1
Embase de vent ilateur UC x1 Embase de ventilateur UC x1

Connecteur
embarqué

E/S du
panneau
arrière

Dimensions
de la carte
Fonctionnali
tés
spéciales

Support SE

Embase de ventilateur système x1 Embase de ventilateur système x1
Embase d'effacement CMOS x1 Embase d'effacement CMOS x1
Connecteur USB 2.0 x2 Connecteur USB 2.0 x2
Connecteur d' aliment at ion x1
(24 broches)
Connecteur d' aliment at ion x1
(4 broch es)
Connecteur de Port d'imprimante x1 Connecteur de Port d'imprimante x1

Clavier PS/2 x1
Souris PS/2 x1
Port série x1
Port LA N x 1
Port USB 2.0 (par SB850 ) x2
Port USB 3.0 (par AS M1042) x2
Fiche aud io x3

205 mm (l) X 305 mm (H) 205 mm (l) X 305 mm (H)

Prise en charge RAID 0 / 1 / 10 / 5 Prise en charg e RAID 0 / 1 / 1 0 / 5

Windows XP / Vista / 7
Biostar se réserve le droit d'ajouter ou de
supprimer le support de SE avec ou sans préavis.

Connecteur d' aliment at ion x1
(24 broches)
Connecteur d' aliment at ion x1
(4 broch es)

Clavier PS/2 x1
Souris PS/2 x1
Port série x1
Port LA N x 1
Port USB 2.0 x4
Fiche aud io x3

Windows XP / Vista / 7
Biostar se réserve le droit d'ajouter ou de
supprimer le support de SE avec ou sans préavis.

A870U3/A870

33

Motherboard Manual

ITALIAN

A870U3 A870

CPU

FSB

Chipset

Super I/O

Memoria
principale

SATA 3

LAN

Supporto
audio HD

34

Socket AM3
Processori AMD Pheno m II/Athlon II/Sempron
L’arch itettura AMD 64 abilit a la
computazione 32 e 64 bit
Supporto di Hyper Transport 3.0 e
Cool’n’Quiet
(Watt massimo : 125W)

Supporto di HyperTransport 3.0 fino a 5.2
GT/s di larghezza di banda

AMD 870
AMD SB850
ITE 8728
Fo rn isce le funz ionalit à legacy Super I/O
usate più comunemente.
Interfaccia LPC (Low Pin Count)
Funzioni di controllo dell’ambiente:
Monitoraggio hardware
Funzione "Smart Guardian" di ITE
Alloggi DIMM DDR3 x 4
Capacità massima della memor ia 16GB
Ciascun DIMM supporta DDR3 512MB e
1GB/2GB/4GB
Modulo di memoria DDR3 a canale doppio
Supporto di DDR3 800 / 1066 / 1333
Supporto di DDR3 1600 (OC)
DIMM registrati e DIMM ECC non sono
supportati

Co ntro ller Serial ATA in tegrat o
Velocità di trasferimento dei dati fino a 6
Gb/s.
Co mpatibi le s pecifiche SATA Vers io ne 3.0.
Realtek RTL 8111E
Negoz iazione automatica 10 / 100 / 10 00 Mb/s
Capacità Half / Full Dup lex

ALC662
Uscita audio 5.1 canali
Supporto audio High-Definition (HD)

Alloggio PCI Express Gen2 x16 x2 Alloggio PCI Express Gen2 x16 x2
Alloggio PCI Express Gen2 x1 x2 Alloggio PCI Express Gen2 x1 x2 A llogg i

Allo ggio PC I x 2 Allo ggio PC I x 2

Socket AM3
Processori AMD Pheno m II/Athlon II/Sempron
L’arch itettura AMD 64 abilit a la
computazione 32 e 64 bit
Supporto di Hyper Transport 3.0 e
Cool’n’Quiet
(Watt massimo : 125W)

Supporto di HyperTransport 3.0 fino a 5.2
GT/s di larghezza di banda

AMD 870
AMD SB850
ITE 8728
Fo rn isce le funz ionalit à legacy Super I/O
usate più comunemente.
Interfaccia LPC (Low Pin Count)
Funzioni di controllo dell’ambiente:
Monitoraggio hardware
Funzione "Smart Guardian" di ITE
Alloggi DIMM DDR3 x 4
Capacità massima della memor ia 16GB
Ciascun DIMM supporta DDR3 512MB e
1GB/2GB/4GB
Modulo di memoria DDR3 a canale doppio
Supporto di DDR3 800 / 1066 / 1333
Supporto di DDR3 1600 (OC)
DIMM registrati e DIMM ECC non sono
supportati

Co ntro ller Serial ATA in tegrat o
Velocità di trasferimento dei dati fino a 6
Gb/s.
Co mpatibi le s pecifiche SATA Vers io ne 3.0.
Realtek RTL 8111E
Negoz iazione automatica 10 / 100 / 10 00 Mb/s
Capacità Half / Full Dup lex

ALC662
Uscita audio 5.1 canali
Supporto audio High-Definition (HD)

A870U3 A870

Connettore SATA x6 Connettore SATA x 6
Connettore pannello frontale x1 Connettore pannello frontale x1
Connettore audio frontale x1 Connettore audio frontale x1
Connettore output SPDIF x1 Connettore output SPDIF x1
Co llet tore vent olina CPU x1 Collett ore vento lina C PU x 1

Connettori
su scheda

I/O
pannello
posteriore

Dimension
i scheda
Caratterist
iche
speciali

Sistemi
oper ativi
supportati

Co llet tore vent olina sis t em a x1 Collett o re vento lina sistema x 1
Co llet tore cancel laz ione CMO S x 1 C olletto re can ce llaz io ne CMO S x 1
Connettore USB 2.0 x2 Connettore USB 2.0 x2
Connetto re alimentazione x1
(24 pin)
Connetto re alimentazione x1
(4 pin)
Connettore Porta stampante x1 Connettore Porta stampante x1

Tas tiera P S /2 x1
Mou se PS /2 x 1
Porta seriale x1
Porta LAN x1
Porta USB 2.0 (da SB850) x2
Porta USB 3.0 (da ASM1042) x2
Connettore audio x3

205 mm (larghezza) x 305 mm (altezza) 205 mm (larghezza) x 305 mm (altezza)

Supporto RAID 0 / 1 / 10 / 5 Supporto RAID 0 / 1 / 10 / 5

Windows XP / Vist a / 7
Biostar si riserva il diritto di aggiungere o
rimuovere il supporto di qualsiasi sistema
operativo senza preavviso.

Connetto re alimentazione x1
(24 pin)
Connetto re alimentazione x1
(4 pin)

Tas tiera P S /2 x1
Mou se PS /2 x 1
Porta seriale x1
Porta LAN x1
Porta USB 2.0 x4
Connettore audio x3

Windows XP / Vist a / 7
Biostar si riserva il diritto di aggiungere o
rimuovere il supporto di qualsiasi sistema
operativo senza preavviso.

A870U3/A870

35

Motherboard Manual

SPANISH

A870U3 A870

CPU

FSB

Conjunto de
chips

Súper E/S

Memoria
principal

SATA 3

Red Local

Soporte de
sonido HD

Ranuras

36

Conector AM3
Procesadores AMD Phenom II/Athlon
II/Sempron
La arquitectura AMD 64 permite el procesado de
32 y 64 bits
Soporta las tecnologías Hyper Transport 3.0 y
Cool’n’Quiet
(Vatio máximo: 125W )
Admite HyperTransport 3.0 con un ancho de
banda de hasta 5.2 GT/s
AMD 870
AMD SB850

ITE 8728
Le ofrece las funcionalidades heredadas de uso
más común Súper E/S.
Interfaz de cuenta Low Pin
In ic iativas de co ntrol de entorno ,
Monitor hardware
Función "Guardia inteligente" de ITE

Ranuras DIMM DDR3 x 4
Capacidad máxima de memoria de 16GB
Cada DIMM admite DDR de 512MB y
1GB/2GB/4GB
Módulo de memoria DDR3 de canal Doble
Admite DDR3 de 800 / 1066 / 1333
Admite DDR3 de 1600 (OC)
No admite DIMM registrados o DIMM
comp atibles con ECC
Controlador ATA Serie Integrado
Tasas de transferencia de hasta 6 Gb/s.
Co mpat ible co n la ve rsió n SATA 3 .0.
Realtek RTL 8111E
Negociación de 10 / 100 / 1000 Mb/s
Funciones Half / Full dúplex

ALC662
Salida de sonido de 5.1 canales
Soporte de sonido Alta Definición

Ranura PCI Express Gen2 x16 X2 Ranura PCI Express Gen2 x16 X2
Ranura PCI Express Gen2 x 1 X2 Ranura PCI Express Gen2 x 1 X2

Ranura PCI X2 Ranura PCI X2

Conector AM3
Procesadores AMD Phenom II/Athlon
II/Sempron
La arquitectura AMD 64 permite el procesado de
32 y 64 bits
Soporta las tecnologías Hyper Transport 3.0 y
Cool’n’Quiet
(Vatio máximo: 125W )
Admite HyperTransport 3.0 con un ancho de
banda de hasta 5.2 GT/s
AMD 870
AMD SB850

ITE 8728
Le ofrece las funcionalidades heredadas de uso
más común Súper E/S.
Interfaz de cuenta Low Pin
In ic iativas de co ntrol de entorno ,
Monitor hardware
Función "Guardia inteligente" de ITE

Ranuras DIMM DDR3 x 4
Capacidad máxima de memoria de 16GB
Cada DIMM admite DDR de 512MB y
1GB/2GB/4GB
Módulo de memoria DDR3 de canal Doble
Admite DDR3 de 800 / 1066 / 1333
Admite DDR3 de 1600 (OC)
No admite DIMM registrados o DIMM
comp atibles con ECC
Controlador ATA Serie Integrado
Tasas de transferencia de hasta 6 Gb/s.
Co mpat ible co n la ve rsió n SATA 3 .0.
Realtek RTL 8111E
Negociación de 10 / 100 / 1000 Mb/s
Funciones Half / Full dúplex

ALC662
Salida de sonido de 5.1 canales
Soporte de sonido Alta Definición

A870U3 A870

Conector SATA X6 Conector SATA X6
Conector de panel frontal X1 Conector de panel frontal X1
Conector de sonido frontal X1 Conector de sonido frontal X1
Conector de salida S/PDIF X1 Conector de salida S/PDIF X1
Cabecera de ventilador de CPU X1 Cabecera de ventilador de CPU X1

Conectores
en p laca

Panel
trasero de
E/S

Ta mañ o de
la placa
Funciones
especiales

Soporte de
sistema
operativo

Cabecera de ventilador de sistema X1 Cabecera de ventilador de sistema X1
Cabecera de borrado de CMOS X1 Cabecera de borrado de CMOS X1
Conector USB 2.0 X2 Conector USB 2.0 X2
Conector de alimentación X1
(24 patillas)
Conector de alimentación X1
(4 patillas)
Conector Puerto de impresora X1 Conector Puerto de impresora X1

Tec lad o P S /2 X 1
Ratón PS/2 X1
Puert o s er ie X1
Puerto de red local X1
Puerto USB 2.0 (por SB850) X2
Puerto USB 3.0 (por AS M1042) X2
Conector de sonido X3

205 mm. (A) X 305 Mm. (H) 205 mm. (A) X 305 Mm. (H)

Admite RAID 0 / 1 / 10 / 5 Admite RAID 0 / 1 / 10 / 5

Windows XP / Vista / 7
Biostar se reserva el derecho de añadir o retirar
el soporte de cualquier SO con o s in aviso previo.

Conector de alimentación X1
(24 patillas)
Conector de alimentación X1
(4 patillas)

Tec lad o P S /2 X 1
Ratón PS/2 X1
Puert o s er ie X1
Puerto de red local X1
Puert o USB 2.0 X4
Conector de sonido X3

Windows XP / Vista / 7
Biostar se reserva el derecho de añadir o retirar
el soporte de cualquier SO con o s in aviso previo.

A870U3/A870

37

Motherboard Manual

PORTUGUESE

A870U3 A870

CPU

FSB

Chipset

Especificaçã
o Super I/O

Memória
principal

SATA 3

LAN

Suporte
para áudio
de alta
definição

Ranhuras

Socket AM3
Processadores AMD Phenom II/Athlon

II/Sempron
A arq uite ctura A MD 64 p erm ite uma computação
de 32 e 64 bits
Suporta as tecnologias Hyper Transport 3.0 e
Cool’n’Quiet
(Watt máx imo: 125W)
Suporta a tecnologia HyperTransport 3.0 com
uma largura de banda até 5.2 GT/s
AMD 870
AMD SB850
ITE 8728
Proporciona as funcionalidades mais utilizadas
em termos da especificação Super I/O.
Interface LPC (Low Pin Count).
In ic iativas par a cont ro lo do amb ient e
Monitorização do hardware
Função "Smart Guardian" d a ITE
Ranhuras DIMM DDR3 x 4
Capac idade máxima d e memór ia: 16 GB

Cada módulo DIMM suporta uma memória
DDR3 de 512 MB & 1 GB/2 GB/4 GB
Módulo de memória DDR3 de canal duplo
Suporta módulos DDR3 800 / 1066 / 1333
Suporta módulos DDR3 1600 (OC)
Os módulos DIMM registados e os DIMM ECC
não são suportados

Controlador Serial ATA integrado
Velocidades de transmissão de dados até 6 Gb/s.
Co mpat ibilidade co m a espe cific ação SATA
versão 3.0 .
Realtek RTL 8111E
Auto negociação de 10 / 100 / 1000 Mb/s
Capacidade semi/full-duplex

ALC662
Saída de áudio de 5.1 canais
Suporta a especificação High-Definition Audio

Ranhura PCI Express Gen2 x16 x2 Ranhura PCI Express Gen2 x16 x2
Ranhura PCI Express Gen2 x 1 x2 Ranhura PCI Express Gen2 x 1 x2
Ranhura PCI x2 Ranhura PCI x2

Socket AM3
Processadores AMD Phenom II/Athlon

II/Sempron
A arq uite ctura A MD 64 p erm ite uma computação
de 32 e 64 bits
Suporta as tecnologias Hyper Transport 3.0 e
Cool’n’Quiet
(Watt máx imo: 125W)
Suporta a tecnologia HyperTransport 3.0 com
uma largura de banda até 5.2 GT/s
AMD 870
AMD SB850
ITE 8728
Proporciona as funcionalidades mais utilizadas
em termos da especificação Super I/O.
Interface LPC (Low Pin Count).
In ic iativas par a cont ro lo do amb ient e
Monitorização do hardware
Função "Smart Guardian" d a ITE
Ranhuras DIMM DDR3 x 4
Capac idade máxima d e memór ia: 16 GB

Cada módulo DIMM suporta uma memória
DDR3 de 512 MB & 1 GB/2 GB/4 GB
Módulo de memória DDR3 de canal duplo
Suporta módulos DDR3 800 / 1066 / 1333
Suporta módulos DDR3 1600 (OC)
Os módulos DIMM registados e os DIMM ECC
não são suportados

Controlador Serial ATA integrado
Velocidades de transmissão de dados até 6 Gb/s.
Co mpat ibilidade co m a espe cific ação SATA
versão 3.0 .
Realtek RTL 8111E
Auto negociação de 10 / 100 / 1000 Mb/s
Capacidade semi/full-duplex

ALC662
Saída de áudio de 5.1 canais
Suporta a especificação High-Definition Audio

38

A870U3 A870

Conector SATA x6 Conector SATA x6
Conector do painel frontal x1 Conector do painel frontal x1
Conector de áudio frontal x1 Conector de áudio frontal x1
Conector de saída S/PDIF x1 Conector de saída S/PDIF x1
Conector da ventoinha da CPU x1 Conector da vento inha da CPU x1

Conectores
na placa

Entradas /S
aídas no
painel
traseiro

Tamanho
da placa
Característi
cas
especiais

Sistemas
operativos
suportados

Conector da ventoinha do s istema x1 Conector da vento inha do sistema x1
Conector para limpeza do CMOS x1 Conector para limpeza do CMOS x1
Conector USB 2.0 x2 Conector USB 2.0 x2
Conector de alimentação x1
(24 pinos)
Conector de alimentação x1
(4 p inos )
Conector da para impressora x1 Conector da para impressora x1

Tec lad o P S /2 x 1
Rato PS/2 x1
Porta série x 1
Porta LAN x 1
Porta USB 2.0 (por SB850) x2
Porta USB 3.0 (por ASM1042) x2
Tomada de áudio x3

205 mm (L) X 305 mm (A) 205 mm (L) X 305 mm (A)

Suporta as funções RA ID 0 / 1 / 10 / 5 Suporta as funções RAID 0 / 1 / 10 / 5

Windows XP / Vista / 7
A Biostar reserva-se o direito de adicionar ou
remover suporte para qualquer sistema
operativo com ou sem aviso prévio.

Conector de alimentação x1
(24 pinos)
Conector de alimentação x1
(4 p inos )

Tec lad o P S /2 x 1
Rato PS/2 x1
Porta série x 1
Porta LAN x 1
Porta USB 2.0 x4
Tomada de áudio x3

Windows XP / Vista / 7
A Biostar reserva-se o direito de adicionar ou
remover suporte para qualquer sistema
operativo com ou sem aviso prévio.

A870U3/A870

39

Motherboard Manual

POLISH

A870U3 A870

Procesor

FSB

Chipset

Pamięć
główna

Super I/O

SATA 3

LAN

Obsługa
aud io HD

40

Socket AM3
AMD Phenom II/Athlon II/Sempron Procesory
Architektura AMD 64 umożliwia przetwarzanie
32 i 64 bitowe
Obsługa Hyper Transport 3.0 oraz Cool’n’Quiet
(Maksymalny Watt: 125W)
Obsługa HyperTransport 3.0 o szerokości pasma
do 5.2 GT/s
AMD 870
AMD SB850

Gniazda DDR3 DIMM x 4
Maks. wielkość pamięci 16GB
Każde gniazdo DIMM obs ługuje moduły 512MB
oraz 1GB/2GB/4GB DDR3
Mod uł pamięci DDR3 z trybem podwójnego
kana łu
Obsługa DDR3 800 / 1066 / 1333
Obsługa DDR3 1600 (OC)
Brak obsług i Registered DIMM oraz ECC D IMM

ITE 8728
Zapewn ia najbardziej powszechne funkcje Super
I/O.
Interfejs Low Pin Count
Funkcje kontroli warunków pracy,
Mon itor H /W
Funkcja ITE "Smart Guardian"
Zintegrowany kontroler Serial ATA
Transfer danych do 6 Gb/s.
Zgodność ze specyfikacją SATA w wersj i 3. 0.

Realtek RTL 8111E
110 / 100 / 1000 Mb/s z automatyczną
negocjacją szybkości
Działanie w trybie połowicznego / pełnego
dupleksu

ALC662

5.1 kanałowe wyjście audio
Obsługa H igh- Defin ition A ud io

Gniazdo PCI Express Gen2 x16 x2 Gniazdo PCI Express Gen2 x16 x2
Gniazdo PCI Express Gen2 x 1 x2 Gniazdo PCI Express Gen2 x 1 x2 Gniazda
Gniazdo PCI x2 Gniazdo PCI x2

Socket AM3
AMD Phenom II/Athlon II/Sempron Procesory
Architektura AMD 64 umożliwia przetwarzanie
32 i 64 bitowe
Obsługa Hyper Transport 3.0 oraz Cool’n’Quiet
(Maksymalny Watt: 125W)
Obsługa HyperTransport 3.0 o szerokości pasma
do 5.2 GT/s
AMD 870
AMD SB850

Gniazda DDR3 DIMM x 4
Maks. wielkość pamięci 16GB
Każde gniazdo DIMM obs ługuje moduły 512MB
oraz 1GB/2GB/4GB DDR3
Mod uł pamięci DDR3 z trybem podwójnego
kana łu
Obsługa DDR3 800 / 1066 / 1333
Obsługa DDR3 1600 (OC)
Brak obsług i Registered DIMM oraz ECC D IMM

ITE 8728
Zapewn ia najbardziej powszechne funkcje Super
I/O.
Interfejs Low Pin Count
Funkcje kontroli warunków pracy,
Mon itor H /W
Funkcja ITE "Smart Guardian"
Zintegrowany kontroler Serial ATA
Transfer danych do 6 Gb/s.
Zgodność ze specyfikacją SATA w wersj i 3. 0.

Realtek RTL 8111E
110 / 100 / 1000 Mb/s z automatyczną
negocjacją szybkości
Działanie w trybie połowicznego / pełnego
dupleksu

ALC662

5.1 kanałowe wyjście audio
Obsługa H igh- Defin ition A ud io

A870U3 A870

Złącze SATA x6 Złącze SATA x6
Złącze panela przedniego x1 Złącze panela przedniego x1
Przedn ie z łącze aud io x1 Przedn ie złącze audio x1
Złącze wyjścia S/PDIF x1 Złącze wyjścia S/PDIF x1

Złącza
wbud owan e

Back Panel
I/O

Wymiary
płyty
Funkcje
specjaln e

Obsluga
systemu
operacyjne
go

Złącze główkowe wentylatora procesora x1 Złącze g łówkowe wentylatora procesora x1
Złącze główkowe wentylatora systemowego x1 Złącze głó wkowe wentylatora systemowego x1
Złącze głó wkowe kasowan ia CMOS x 1 Złącze główkowe kasowan ia CMOS x 1
Złącze USB 2.0 x2 Złącze USB 2.0 x2
Złącze zasilania (24 pinowe) x1 Złącze zasilania (24 pinowe) x1
Złącze zas ilania (4 p ino we) x1 Złącze zas ilania (4 p ino we) x1
Złącze Port drukarki x1 Złącze Port drukarki x1

Klawiatura PS/2 x1
Mys z PS /2 x1
Port sz erego wy x 1
Port LA N x 1
Port USB 2.0 (przez SB850 ) x2
Port USB 3.0 (przez AS M1042) x2
Gniazdo audio x3

205 mm (S) X 305 mm (W) 205 mm (S) X 305 mm (W)

Obsługa RAID 0 / 1 / 10 / 5 Obsługa RAID 0 / 1 / 10 / 5

Windows XP / Vista / 7
Biostar zastrzega sobie prawo dodawania lub
odwoływania obs ług i dowo ln ego systemu
operacyjnego b ez powiado mienia.

Klawiatura PS/2 x1
Mys z PS /2 x1
Port sz erego wy x 1
Port LA N x 1
Port USB 2.0 x4
Gniazdo audio x3

Windows XP / Vista / 7
Biostar zastrzega sobie prawo dodawania lub
odwoływania obs ług i dowo ln ego systemu
operacyjnego b ez powiado mienia.

A870U3/A870

41

Motherboard Manual

RUSSIAN

A870U3 A870

Гнездо AM3
Процессоры AMD Phenom II/Athlon

CPU
(центральный
процессор)

FSB

Набо р
микросхем

Основная
память

Super I/O

SATA 3

Локальна я
сеть

Звуко вая
поддержка
жестког о
диска

Слоты

II/Sempron

Арх итектура A MD 64 разрешать обработка
данных на 32 и 64 бит
Поддержка Hyper Transport 3.0 и Cool’n’Quiet
(Макси мальный ватт: 125W)
Поддержка HyperTransport 3.0 с пропус кной
способностью до 5.2 GT/s

AMD 870
AMD SB850

Слоты DDR3 DIMM x 4
Максимальная ёмкость памяти 16 ГБ
Каждый модуль DIMM поддерживает 512МБ
& 1ГБ/2ГБ /4ГБ DDR3
Мод ул ь памяти с двух канальн ым режимом

DDR3

Поддержка DDR3 800 / 1066 / 1333
Поддержка DDR3 1600 (OC)
Не поддерживает зарегистрированн ые
модули DIMM and ECC DIMM

ITE 8728

Обеспечивает наиболее используемые
действующие фун кц и он альные
возможно сти Super I/O.
Интерфейс с ни зким количеством выводов
Инициативы по охране окружающей среды,
Аппаратный монитор
Функция ITE "S mart Guardian"
(Интеллектуальная защита)
Встроенное послед оват ельное ус тро йство
упра влени я ATA
скорость передачи данных до 6 гигабит/с.
Соответствие специ фикации SATA верс ия

3.0.
Realtek RTL 8111E
Автоматическо е согласо вани е 10 / 100 /
1000 Мб /с
Частичная / полна я дуплексная способность

ALC662
Звуко вая поддержка High-Def in ition

5.1канальный звуковой выхо д

Слот PCI Express Gen2 x16 x2 Слот PCI Express Gen2 x16 x2
Слот PCI Express Gen2 x 1 x2 Слот PCI Express Gen2 x 1 x2
Слот PCI x2 Слот PC I x2

Гнездо AM3
Процессоры AMD Phenom II/Athlon

II/Sempron

Арх итектура A MD 64 разрешать обработка
данных на 32 и 64 бит
Поддержка Hyper Transport 3.0 и Cool’n’Quiet
(Макси мальный ватт: 125W)
Поддержка HyperTransport 3.0 с пропус кной
способностью до 5.2 GT/s

AMD 870
AMD SB850

Слоты DDR3 DIMM x 4
Максимальная ёмкость памяти 16 ГБ
Каждый модуль DIMM поддерживает 512МБ
& 1ГБ/2ГБ /4ГБ DDR3
Мод ул ь памяти с двух канальн ым режимом

DDR3

Поддержка DDR3 800 / 1066 / 1333
Поддержка DDR3 1600 (OC)
Не поддерживает зарегистрированн ые
модули DIMM and ECC DIMM

ITE 8728

Обеспечивает наиболее используемые
действующие фун кц и он альные
возможно сти Super I/O.
Интерфейс с ни зким количеством выводов
Инициативы по охране окружающей среды,
Аппаратный монитор
Функция ITE "S mart Guardian"
(Интеллектуальная защита)
Встроенное послед оват ельное ус тро йство
упра влени я ATA
скорость передачи данных до 6 гигабит/с.
Соответствие специ фикации SATA верс ия

3.0.
Realtek RTL 8111E
Автоматическо е согласо вани е 10 / 100 /
1000 Мб /с
Частичная / полна я дуплексная способность

ALC662
Звуко вая поддержка High-Def in ition

5.1канальный звуковой выхо д

42

A870U3 A870

Разъ ём SATA x6 Разъём SATA x6
Разъ ём на лицевой панели x1 Разъём на лицевой панели x1
Входной звуковой разъём x1 Входной звуковой разъём x1
Разъ ём вывода для S/PDIF x1 Разъём вывод а для S/PDIF x1

Встроенный
разъём

Задняя
панель
средств
ввода-вывода

Разм ер
панели
Специальные
технические
характеристи
ки

Поддержка

OS

Контактирующее приспособление
вентил ятора центрального
процессора x1
Контактирующее приспособление
вентил ятора системы x1
Открытое контактирую ще е
приспособление CMOS x1
USB 2.0-разъём x2 USB 2.0-разъём x2
Разъ ем питания (24 вывод) x1 Ра зъ ем питания (24 выво д) x1
Разъ ем питания (4 вывод) x1 Разъем питания (4 выво д) x1
Разъ ём Порт подклю чения
принтера x1
Клавиатура PS/2 x1
Мышь PS /2 x1
Последо вательны й порт x1
Пор т LAN x1

USB 2.0-порт (по SB850) x2
USB 3.0-порт (по ASM1042) x2

Гнездо для подключени я
наушников x3

205 мм (Ш) X 305 мм (В) 205 мм (Ш) X 305 мм (В)

Поддержка RAID 0 / 1 / 10 / 5 Поддержка RAID 0 / 1 / 10 / 5

Windows XP / Vista / 7
Biostar сохраняет за собой право добавлять

или удалять средства обеспечения для OS с
или без предварительного уведомления.

Контактирующее приспособление
вентил ятора центрального
процессора x1
Контактирующее приспособление
вентил ятора системы x1
Открытое контактирую ще е
приспособление CMOS x1

Разъ ём Порт подклю чения
принтера x1

Клавиатура PS/2 x1
Мышь PS /2 x1
Последо вательны й порт x1
Пор т LAN x1
USB 2.0-порт x4
Гнездо для подключени я
наушников x3

Windows XP / Vista / 7
Biostar сохраняет за собой право добавлять

или удалять средства обеспечения для OS с
или без предварительного уведомления.

A870U3/A870

43

Motherboard Manual

ARABIC

A870 A870U3

ﺲﺒﻘﻣA ﺲﺒﻘﻣ AM3

تﺎﺠﻟﺎﻌﻣAMD Phenom II/Athlon II/Sempron

ﺔﻴﻨﻘﺗ ﻦﻜﻤﺗAMD 64 ﺔﻋﺮﺴﺏ ﺔﻴﺏﻮ ﺳﺎﺤﻟ ا تﺎﻴﻠﻤﻌﻟا ءاﺮﺝإ 32 و64 ﺖﺏ

ﺔﻴﻨﻘ ﺗ ﻢﻋﺪﺗHyper Trans po rt و 3. 0 Cool’n’Quiet

(طاو ىﻮﺼﻗ: 125و)

ﺔﻴﻨﻘ ﺗ ﻢﻋﺪﺗHyperTransport ﻰﻟإ ﻞﺼی ددﺮﺘﺏ 3.0 5.2 GT/s ﺔﻴﻨﻘ ﺗ ﻢﻋﺪﺗHyperTransport ﻰﻟإ ﻞﺼی ددﺮﺘﺏ 3.0 5.2 GT/s

AMD 870

AMD SB850

ITE 8728

ﺔﻔﻴﻇ و ﺮﻓﻮﺗSuper I/O ًﺎﻣ ا ﺪ ﺨ ﺘﺳا ﺮﺜآﻷا .

ﺗﻢﻋﺪ ﺔﻴﻨﻘﺗ Low Pin Co unt Interface

ا ﻞﺋﺎﺳوﺔﺌﻴﺒﻟا ﻲﻓ ﻢﻜﺤﺘﻟ:

ةﺰﻬﺝﻷا ﺔﻟﺎﺡ ﺔﻓﺮﻌﻤﻟ ﺐﻗاﺮﻣ

ﺔﻔﻴﻇو"S mart Gu ard ian" ﻦﻣ ITE

ﺔﺤﺘﻓDDR3 DIM M دﺪﻋ4

ىﻮﺼﻗ ةﺮآاذ ﺔﻌﺳ16 ﺖیﺎﺏ ﺎﺠﻴﺝ

ﺔﺤﺘﻓ ﻞآ ﻢﻋﺪﺗDIMM عﻮﻥ ﻦﻣ ةﺮآاذ ﻢﻋﺪﺗ DDR3 ﺔﻌﺳ

ةﺮآاذ ةﺪﺡوDDR3 ﻘﻟا ﺔﺝودﺰﻣةﺎﻨ

عﻮﻥ ﻦﻣ ةﺮآاﺬﻟا ﻢﻋﺪﺗDDR3 تﺎﻌﺳ 800 / 1066 / 1333ﺖیﺎﺏ ﺎﺠﻴﻣ

عﻮﻥ ﻦﻣ ةﺮآاﺬﻟا ﻢﻋﺪﺗDDR3 تﺎﻌﺳ 1600) OC(ﺠﻴﻣ ﺖیﺎﺏ ﺎ

ةﺮآاﺬﻟا ﻖﺋﺎﻗر ﻢﻋﺪﺗ ﻻDIMM ﻊﻣ ﻖﻓاﻮﺘﺗ ﻻ ﻲﺘﻟا ﻚﻠ ﺗو ECC

ﺔﻘﺏﺎﻄﻣ تﺎﻔﺹاﻮﻤﻟ SATA راﺪﺹﻹا 3.0.

ﻦﻣ ﻒیﺮﻌﺘﻟا ﻲﻟﺎﻋ تﻮﺼﻟا ﺔﻴﻨﻘ ﺗ ﻢﻋﺪﺗ

512 ﺖیﺎﺏ ﺎﺠﻴﻣ

ﻢﻜﺤﺘﻣ Serial ATA ﻞﻣﺎﻜﺘﻣ

ﻞﻘﻥ تﺎﻥﺎﻴﺒﻟا تﺎﻋﺮﺴﺏ ﻞﺼﺗ ﻰﻟإ 6 ﺖﺏﺎﺠﻴﺝ/ﺔﻴﻥﺎﺙ.

Realtek RTL 8111E

ضوﺎﻔﺗ ﻲﺋﺎﻘﻠﺗ 10/100 ﺎﺠﻴﻣ ﺖیﺎﺏ /ﺔﻴﻥﺎﺙ و1ﺎﺠﻴﺝ ﺖﺏ/ﺔﻴﻥﺎﺙ

ﻞﻣﺎﻜﻟا جودﺰﻤﻟا ﻞﻘﻨﻟا ﺔﻴﻥﺎﻜﻣإ/ﻲﻔﺼﻨﻟا

ALC662

5.1 تاﻮ ﻨﻗ جﺮﺨﻟ تﻮﺼﻟا

ﺔﺤﺘﻓGen2 x16 PCI Express دﺪ ﻋ2 ﺔﺤﺘﻓGen2 x16 PCI Express دﺪ ﻋ2

ﺔﺤﺘﻓPCI Express Gen2 x 1 دﺪﻋ2 ﺔﺤﺘﻓPCI Express Gen2 x 1 دﺪﻋ2

ﺔﺤﺘﻓPCI دﺪﻋ2 ﺔﺤﺘﻓPCI دﺪﻋ2

تﺎﺠﻟﺎﻌﻣAMD Phenom II/Athlon II/Sempron

ﺔﻴﻨﻘﺗ ﻦﻜﻤﺗAMD 64 ﺔﻋﺮﺴﺏ ﺔﻴﺏﻮ ﺳﺎﺤﻟ ا تﺎﻴﻠﻤﻌﻟا ءاﺮﺝإ 32 و64 ﺖﺏ

ﺔﻴﻨﻘ ﺗ ﻢﻋﺪﺗHyper Trans po rt و 3. 0 Cool’n’Quiet

(طاو ىﻮﺼﻗ: 125و)

AMD SB850

ﺔﻔﻴﻇ و ﺮﻓﻮﺗSuper I/O ًﺎﻣ ا ﺪ ﺨ ﺘﺳا ﺮﺜآﻷا .

ﺗﻢﻋﺪ ﺔﻴﻨﻘﺗ Low Pin Co unt Interface

ﺔﺌﻴﺒﻟا ﻲﻓ ﻢﻜﺤﺘﻟا ﻞﺋﺎﺳو:

ةﺰﻬﺝﻷا ﺔﻟﺎﺡ ﺔﻓﺮﻌﻤﻟ ﺐﻗاﺮﻣ

ﺔﻔﻴﻇو"S mart Gu ard ian" ﻦﻣ ITE

ىﻮﺼﻗ ةﺮآاذ ﺔﻌﺳ16 ﺖیﺎﺏ ﺎﺠﻴﺝ

ﺔﺤﺘﻓ ﻞآ ﻢﻋﺪﺗDIMM عﻮﻥ ﻦﻣ ةﺮآاذ ﻢﻋﺪﺗ DDR3 ﺔﻌﺳ

و1/و 2/و 4 ﺎﺠﻴﺝﺖیﺎﺏ

ةﺮآاذ ةﺪﺡوDDR3 ﻘﻟا ﺔﺝودﺰﻣةﺎﻨ

عﻮﻥ ﻦﻣ ةﺮآاﺬﻟا ﻢﻋﺪﺗDDR3 تﺎﻌﺳ 800/ 1066 / 1333ﺖیﺎﺏ ﺎﺠﻴﻣ

عﻮﻥ ﻦﻣ ةﺮآاﺬﻟا ﻢﻋﺪﺗDDR3 تﺎﻌﺳ 1600) OC(ﺖیﺎﺏ ﺎﺠﻴﻣ

ةﺮآاﺬﻟا ﻖﺋﺎﻗر ﻢﻋﺪﺗ ﻻDIMM ﻊﻣ ﻖﻓاﻮﺘﺗ ﻻ ﻲﺘﻟا ﻚﻠ ﺗو ECC

ﻜﺤﺘﻣﻢ Serial ATA ﻞﻣﺎﻜﺘﻣ

ﻞﻘﻥ تﺎﻥﺎﻴﺒﻟا تﺎﻋﺮﺴﺏ ﻞﺼﺗ ﻰﻟإ 6 ﺖﺏﺎﺠﻴﺝ/ﺔﻴﻥﺎﺙ.

ﺔﻘﺏﺎﻄﻣ تﺎﻔﺹاﻮﻤﻟ SATA راﺪﺹﻹا 3.0.

Realtek RTL 8111E

ﻞﻣﺎﻜﻟا جودﺰﻤﻟا ﻞﻘﻨﻟا ﺔﻴﻥﺎﻜﻣإ/ﻲﻔﺼﻨﻟا

5.1 تاﻮ ﻨﻗ جﺮﺨﻟ تﻮﺼﻟا

ﻦﻣ ﻒیﺮﻌﺘﻟا ﻲﻟﺎﻋ تﻮﺼﻟا ﺔﻴﻨﻘ ﺗ ﻢﻋﺪﺗ

ﺲﺒﻘﻣAM3

AMD 870

ITE 8728

ﺔﺤﺘﻓDDR3 DIM M دﺪﻋ4

512 ﺖیﺎﺏ ﺎﺠﻴﻣ

ضوﺎﻔﺗ ﻲﺋﺎﻘﻠﺗ 10/100 ﺠﻴﻣﺎ ﺖیﺎﺏ /ﺔﻴﻥﺎﺙ و1ﺎﺠﻴﺝ ﺖﺏ/ﺔﻴﻥﺎﺙ

ALC662

و1/و 2/و 4 ﺎﺠﻴﺝﺖیﺎﺏ

ةﺪﺡو ﺔﺠﻟﺎﻌﻤﻟا

ﺔیﺰآﺮﻤﻟا

ﻞﻗﺎﻨﻟا ﻲﻣﺎﻣﻷا ﻲﺒﻥﺎﺠﻟا

ﺔﻋﻮﻤﺠﻣ ﺢﺋاﺮﺸﻟا

Super I/O

ةﺮآاﺬﻟا ﺔﻴﺴﻴﺋﺮﻟا

SATA 3

ﺔﻜﺒﺵ ﺔﻴﻠﺥاد

ﻢﻋد تﻮﺼﻟا ﻲﻟﺎﻋ

ﻒیﺮﻌﺘﻟا

تﺎﺤﺘﻔﻟا

44

A870U3/A870

A870 A870U3

ﺬﻔﻨﻣSATA دﺪﻋ6 ﺬﻔﻨﻣSATA دﺪﻋ6

ﺔﻴﻣﺎﻣﻷا ﺔﺡﻮﻠﻟا ﺬﻔﻨﻣ دﺪﻋ1 ﺔﻴﻣﺎﻣﻷا ﺔﺡﻮﻠﻟا ﺬﻔﻨﻣ دﺪﻋ1

ﻟا ﺬﻔﻨﻣﻲﻣﺎﻣﻷا تﻮﺼ دﺪﻋ1 ﻲﻣﺎﻣﻷا تﻮﺼﻟا ﺬﻔﻨﻣ دﺪﻋ1

جﺮﺥ ﺬﻔﻨﻣS/PDIF دﺪﻋ1 جﺮﺥ ﺬﻔﻨﻣS/PDIF دﺪﻋ1

ﺔیﺰآﺮﻤﻟا ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺡو ﺔﺡوﺮﻣ ﺔﻠﺹو دﺪﻋ1 ﺔیﺰآﺮﻤﻟا ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺡو ﺔﺡوﺮﻣ ﺔﻠﺹو دﺪﻋ1

مﺎﻈﻨﻟا ﺔﺡوﺮﻣ ﺔﻠﺹو دﺪﻋ1 مﺎﻈﻨﻟا ﺔﺡوﺮﻣ ﺔﻠﺹو دﺪﻋ1

ﺢﺴﻣ ﺔﻠﺹوCMOS دﺪﻋ1 ﺢﺴ ﻣ ﺔﻠﺹوCMOS دﺪﻋ1

ﺬﻔﻨﻣUSB 2.0 دﺪﻋ2 ﺬﻔﻨﻣUSB 2.0 دﺪﻋ2

ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻣ)24سﻮﺏد( دﺪﻋ1 ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻣ)24سﻮﺏد( دﺪﻋ1

ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻣ)4سﻮﺏد( دﺪﻋ1 ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻣ)4سﻮﺏد( دﺪﻋ1

ﺔﻌﺏﺎﻃ ﺬﻔﻨﻣ دﺪ ﻋ1 ﺔﻌﺏﺎﻃ ﺬﻔﻨﻣ دﺪ ﻋ1

ﺬﻓﺎﻨﻤﻟا ﻰﻠﻋ ﺢﻄ ﺳ

ﺔﺡﻮﻠﻟا

ﻆﻔﺘﺤﺗBiostar ﻈﻥ يﻷ ﻢﻋﺪﻟا ﺔﻟازإ وأ ﺔﻓﺎﺿإ ﻲﻓ ﺎﻬﻘﺤﺏ وأ رﺎﻄﺥﺈﺏ ﻞﻴﻐﺸﺗ مﺎ

ﺢﻴﺗﺎﻔﻣ ﺔﺡﻮﻟPS/2 دﺪﻋ1

سوﺎﻣ PS/2 دﺪﻋ1

ﻲﻠﺴﻠﺴﺗ ﺬﻔ ﻨﻣ دﺪﻋ1

ﺔﻴﻠﺤﻣ لﺎﺼﺗا ﺔﻜﺒﺵ ﺬﻔﻨﻣ دﺪﻋ 1

ﺬﻓﺎﻨﻣUSB 2.0 دﺪﻋ4

تﻮﺹ ﺲﺒﻘﻣ دﺪﻋ3

205 ﻢﻣ)ضﺮﻋ (X 305 ﻢﻣ)عﺎﻔﺗرا( 205 ﻢﻣ)ضﺮﻋ (X 305 ﻢﻣ)عﺎﻔﺗرا(

ﺔﻴﻨﻘ ﺗ ﻢﻋﺪﺗRAID 0 / 1 / 10 / 5

Windows XP / Vista / 7

رﺎﻄﺥإ نوﺪﺏ.

ﺢﻴﺗﺎﻔﻣ ﺔﺡﻮﻟPS/2 دﺪﻋ1

سوﺎﻣ PS/2 دﺪﻋ1

ﻲﻠﺴﻠﺴﺗ ﺬﻔ ﻨﻣ دﺪﻋ1

ﺔﻴﻠﺤﻣ لﺎﺼﺗا ﺔﻜﺒﺵ ﺬﻔﻨﻣ دﺪﻋ 1

ﺬﻓﺎﻨﻣ2.0US B(SB850 ﻦﻣ ﻞﺒﻗ ) دﺪﻋ2

ﺬﻓﺎﻨﻣSB3.0U(ASM104 2 ﻦﻣ ﻞﺒﻗ ) دﺪﻋ2

تﻮﺹ ﺲﺒﻘﻣ دﺪﻋ 3

ﺔﻴﻨﻘ ﺗ ﻢﻋﺪﺗRAID 0 / 1 / 10 / 5

Windows XP / Vista / 7

ﻆﻔﺘﺤﺗBiostar وأ رﺎﻄﺥﺈﺏ ﻞﻴﻐﺸﺗ مﺎﻈﻥ يﻷ ﻢﻋﺪﻟا ﺔﻟازإ وأ ﺔﻓﺎﺿإ ﻲﻓ ﺎﻬﻘﺤﺏ

رﺎﻄﺥإ نوﺪﺏ.

ﺬﻓﺎﻨﻣ ﻞﺥد/جﺮﺥ

ﺔﺡﻮﻠﻟا ﺔﻴﻔﻠﺨﻟا

ﻢﺠﺡ ﺔﺡﻮﻠﻟا

ﺔﺹﺎﺥ ﺎیاﺰﻣ

ﻢﻋد ﺔﻤﻈﻥأ ﻞﻴﻐﺸﺘﻟا

45

Motherboard Manual

JAPANESE

A870U3 A870

Socket AM3
AMD Phenom II/Athlon II/Sempron プロセッサ
AMD 64アーキ テクチャで は、32ビ ットと64ビッ ト計

算が可能です
ハイパートラ ンス ポート3.0と クールアン ドクワイア

ットをサポー トし ます

(最高 のワット : 125W)

5.2 GT/sのバンド 幅まで ハイパート ランスポー ト3.0
をサポートし ます

AMD 870

AMD SB850

DDR3 DIMMスロット x 4

最大メモリ容 量16GB
各DIMMは 512 MB & 1GB/2GB/4GB DDR3をサポ
ート

デュアル チ ャン ネルモードDDR3メモリモジ ュール

DDR3 800 / 1066 / 1333 をサポート
DDR3 1600 (OC) をサ ポート
登録済みDIMMとECC D IMMはサポート されま せん

ITE 8728

もっとも一般 に使 用されるレ ガシーSuper I/O機能を
採用していま す。
低ピンカウン トイ ンターフェ イス
環境コントロ ール イニシアチ ブ、

H/Wモニター

ITE の「スマート ガー ディアン」 機能

統合シリアルATA コントロー ラ
最高6Gb/秒の データ転送 速度

SATAバージョン3.0仕様に準拠。

Realtek RTL 8111E

10 / 100 / 1000 Mb/秒のオート ネゴシ エーション
半/全二重機能

ALC662

5.1チャンネル オーディオ アウ ト
ハイデフィニ ショ ンオーディ オのサポー ト

CPU

FSB

チップセット

メインメモリ

Super I/O

SATA 3

LAN

HDオ ーディ

オのサポート

スロット

Socket AM3
AMD Phenom II/Athlon II/Sempron プロセッサ
AMD 64アーキ テクチャで は、32ビ ットと64ビッ ト計

算が可能です
ハイパートラ ンス ポート3.0と クールアン ドクワイア

ットをサポー トし ます

(最高 のワット : 125W)

5.2 GT/sのバンド 幅まで ハイパート ランスポー ト3.0
をサポートし ます

AMD 870

AMD SB850

DDR3 DIMMスロット x 4

最大メモリ容 量16GB
各DIMMは 512 MB & 1GB/2GB/4GB DDR3をサポ
ート

デュアル チ ャン ネルモードDDR3メモリモジ ュール

DDR3 800 / 1066 / 1333 をサポート
DDR3 1600 (OC) をサ ポート
登録済みDIMMとECC D IMMはサポート されま せん

ITE 8728

もっとも一般 に使 用されるレ ガシーSuper I/O機能を
採用していま す。
低ピンカウン トイ ンターフェ イス
環境コントロ ール イニシアチ ブ、

H/Wモニター

ITE の「スマート ガー ディアン」 機能

統合シリアルATA コントロー ラ
最高6Gb/秒の データ転送 速度

SATAバージョン3.0仕様に準拠。

Realtek RTL 8111E

10 / 100 / 1000 Mb/秒のオート ネゴシ エーション
半/全二重機能

ALC662

5.1チャンネル オーディオ アウ ト
ハイデフィニ ショ ンオーディ オのサポー ト

PCI Express Gen2 x16スロット x2 PCI Express Gen2 x16スロット x2
PCI Express Gen2 x1スロット x2 PCI Express Gen2 x1スロット x2
PCIスロット x2 PCIスロット x2

46

A870U3/A870

A870U3 A870

SATAコネクタ x6 SATAコネクタ x6
フロントパネ ルコ ネクタ x1 フロントパネ ルコネクタ x1
フロントオー ディ オコネクタ x1 フロン トオーディ オコネ クタ x1
S/PDIFアウトコネ クタ x1 S/PDIFアウトコネ クタ x1

オンボードコ

ネクタ

背面パネル

I/O

ボードサイズ 205 mm (幅) X 305 mm (高さ) 205 mm (幅) X 305 mm (高さ)

特殊機能 RAID 0 / 1 / 10 / 5 のサポ ート RAID 0 / 1 / 10 / 5 のサポ ート

OSサポー ト

CPUファンヘッダ x1 CPUファンヘッダ x1
システムファ ンヘ ッダ x1 システムファ ンヘ ッダ x1
CMOSクリアヘッダ x1 CMOSクリアヘッダ x1
USB 2.0コネクタ x2 USB 2.0コネクタ x2

電源コネクタ (24 ピン) x1 電源コネクタ(24ピン ) x1
電源コネクタ (4ピン) x1 電源コ ネクタ (4ピン) x1
プリンタポー トコ ネクタ x1 プリンタポー トコネクタ x1

PS/2キーボード x1
PS/2マウス x1
シリアルポー ト x1
LANポート x1
USB 2.0ポート(で SB850) x2
USB 3.0ポート (で ASM1042) x2
オーディオジ ャッ ク x3

Windows XP / Vista / 7
Biostarは事前の サポートな しにOSサ ポー トを追加ま
たは削除する 権利 を留保しま す。

PS/2キーボード x1
PS/2マウス x1
シリアルポー ト x1
LANポート x1
USB 2.0ポート x4
オーディオジ ャッ ク x3

Windows XP / Vista / 7
Biostarは事前の サポートな しにOSサ ポー トを追加ま
たは削除する 権利 を留保しま す。

2011/01/17

47