Binatone Spirit 110 User Manual

Spirit 110

Unpacking your phone

Corded Telephone

1. Where to find it

2. Installation

1. Locating the Base unit

The Base unit should be placed on a level surface, in a position where:

 the telephone line cable will reach your telephone line socket or extension socket.

 it is not close to a sink, bath or shower, or anywhere else where

 it is not close to other electrical equipment - fridges, washing

machines, microwave ovens, TVs, fluorescent lights, etc.

2. Plug the coiled handset cord into the Handset. Plug the other end into the jack on the left side of the Base unit.

3. Place the Handset in the Base unit.

Lift the Handset and check for Dial tone

in the earpiece.

Always use the telephone line cord supplied

with your Spirit 110 phone. Other telephone line cords may not work.

Make sure the plugs click into place.

to Modular Wall jack

2. Installation

it might get wet.

Making a

Lift the Handset, listen for a dial tone.

2 Dial the telephone number you wish to call.

To end the call, return the Handset to the

call

Lift the handset to answer call.

To answer a

call

Replace the Handset on the Base unit cradle.

To end a call

3. Telephone Operation

Base unit.

Last Number

Lift the Handset to redial the last number.

Press LNR button.

Redial

Ö The phone automatically dials the last

number you called (maximum of 32 digits).

Mute

During a call press and hold the

(MUTE)

button.

Function

When the mouthpiece is muted, the person at the other end of the call cannot hear you but you can hear his side.

To get back to the call, release the

button.

Use on PBX

Press R (RECALL) button on your

If you are using your Spirit 110 phone on a

RECALL

;

(MUTE)

Spirit 110 phone.

PBX,and the PBX user guide tells you to press

Inserting a

Pressing PAUSE button immediately after the

Pause in

For some switchboard system, an access

the dialing

sequence

access number, a pause of about 3.6 seconds will be entered, and the desired number can

Press PAUSE button to insert a pause when dialing or storing Long Distance Access Codes.

Telphone Operation continue...

be dialed immediately.

number must be dialed (usually an 8 or 9) to get another dial tone and an outside line.

In the box you will find:

• Base Unit

• Handset

• Coiled Handset cord

• Telephone line cord

for Base unit

• User manual

Keep the packing

materials in a safe place in case you later need to transport

Keep your sales (till) receipt, which is your guarantee.

the unit.

3. STO (Store)button

4. MEM button

4 5 6

1. is ringing

for an incoming call.

Ringer light

- This flashes when the phone

2. M1,M2 and M3 one -Touch Memory Buttons

5. LNR(Last Number Redial) button

6. Mute button

7. R(Recall) button

8. P(Pause) button

Plug one end of the telephone line cord the jack at the back of the

base unit and the other end into modular wall jack.

Storing a

Number in

M1,M2,M3 one-touch

Dial out Stored

Lift up Handset, press M1,M2,M3 buttons.

number

Press MEM and then the 0-9 button to

Replace the Handset on the Base unit cradle.

memories

Storing a Number in (0-9) two-touch memor

ies

selected memory.

Connection and conditions for use

You can connect your Spirit 110 phone to a direct exchange line (DEL)

Spirit 110 phone as an

The ringer equivalence numbers (RENs) of all instruments (phones, fax machines, etc.) connected to an exchange line must not add up to more

- otherwise, one or more of them may not ring and/or answer calls

The Spirit 110 phone has a REN of 1, and most other telephones have

Contents of this User Guide

UK Argos(VALUE) Ver4 .0

05-Nov,2009

store the number in the

4. Guarantee and service

This product is guaranteed against manufacturing defects for a period of 1

This does not cover the product where the fault is due to misuse, abuse, use in contravention of the instructions, or where the product has been

In the event of a problem with the product within the guarantee period please return it to your nearest Argos store.

If the item is shown to have had an inherent defect present at the time of

Your statutory rights remain unaffected.

Guarantor; Argos Ltd

489 - 499 Avebury Boulevard

Central Milton Keynes

MK9 2NW

Year.

subject of commercial use.

the subject of unauthorised modifications or alterations, or has been the

sale, the store will provide you with a replacement.

Standard Spirit 110 Telephone

Temperature range Operating 0 ºC to 40 ºC

Storage -20 ºC to 60 ºC

PBX compatibility Timed break recall: 100 ms. Pause length: 3.6

Signalling type: DTMF (dual-tone multifrequency)

Network connection This equipment is intended to be used in the UK

Operation on other countries’ PSTN termination

5. Technical details

seconds.

also called tone dialing.

points cannot be guaranteed

only.

than 4

correctly.

- a line connected to a local exchange, with its own phone number; an extension socket connected to a DEL; or to an extension on an approved compatible PBX. Do not connect the extension to a pay phone.

a REN of 1 unless marked otherwise.

1. Where to find it

2. Installation

Telephone operation

Pressing buttons on your phone

 When the instructions in this user guide tell you simply to ‘press ’ a

button, this means that you should press the button briefly, then

 When the instructions tell you to ‘press and hold’ a button, this

keep the button pressed until the display changes

Guarantee and service Technical details

release it

means you should and / or you hear a tone.

Pd Y^Va V cjbWZg hidgZY ^c Pld1idjX] bZbdgn .41=/

C C

The number dials automatically.

Dial out Stored number

(0-9) two-touch memories

Lift up the handset.

w:-;; <0-

`Y`bdj

*=<<76Ztmt[

-A 16 <0- 5-57:A 47+~ <176 6=5*-: Z_]h[

Lift up Handset, press STO (store) button

Ö If you try to store more than 16 digits,

only the first 16 digits will be saved.

Press M1,M2 or M3 button to store the

Key in the telephone number you wish to

Lift up Handset, press STO (store) button

Key in the telephone number you wish to

number in the selected memory.

Up to a maximum 16 digits.

store.

The number dials automatically.

Waste electricalproducts must not

be disposedof with household waste.

This equipmentshould be taken to

your localrecycling centre for safe

treatment.

EC Declaration of Conformity

We the manufacturer / Importer : Binatone Telecom Plc 1 Apsley Way London

NW2 7HF, United Kingdom.

Declare under our sole responsibility that the following product Type of equipment:

Corded Phone

Model Name:

Spirit 110

Country of Origin:

China

Brand:

Value

complies with the essential protection requirements of R&TTE Directive 1999/5/EC on the approximation of the laws of the Council Directive 2004/108/EC on the approximation of the laws of the Member States relating to electromagnetic compatibility (EMC) and the European Community Directive 2006/95/EC relating to Electrical Safety. Assessment of compliance of the product with the requirements relating to the essential requirements according to Article 3 R&TTE was based on Annex III of the Directive 1999/5/EC and the following standard:

EMC:

Electrical Safety:

The product is labelled with the European Approval Marking CE as show. Any Unauthorized modification of the product voids this Declaration.

Manufacturer / Importer (signature of authorized person)

London, Signature: Place & Date: 18th Sep, 2009

EN55022:2006

EN55024:1998 + A1+A2 EN 60950-1:2001+A11 : 2004

Binatone Spirit 110 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual