BiPAC 7402(G)X(L)
Series
3G/ADSL2+ (802.11g) (VPN) Firewall Router
User Manual
Version Release: 6.24b.dm2
Last Revision July 04.2012
Table of Contents |
|
Chapter 1: Introduction ............................................................................................................. |
1 |
Introduction to your Router....................................................................................................... |
1 |
Features ................................................................................................................................... |
1 |
Chapter 2: Installing the Router................................................................................................ |
4 |
Important note for using this router........................................................................................... |
4 |
Package Contents .................................................................................................................... |
4 |
The Front LEDs........................................................................................................................ |
5 |
The Rear Ports ......................................................................................................................... |
6 |
Cabling ..................................................................................................................................... |
7 |
Chapter 3: Basic Installation..................................................................................................... |
8 |
Connecting Your Router ........................................................................................................... |
9 |
Network configuration............................................................................................................. |
10 |
Configuring PCs in Windows 7 ........................................................................................... |
10 |
Configuring PCs in Windows Vista ..................................................................................... |
12 |
Configuring PCs in Windows 2000 ..................................................................................... |
15 |
Configuring PC in Windows 95/98/ME................................................................................ |
16 |
Configuring PC in Windows NT4.0 ..................................................................................... |
17 |
Factory Default Settings ......................................................................................................... |
18 |
Information from your ISP ...................................................................................................... |
19 |
Configuring with your Web Browser ....................................................................................... |
20 |
Chapter 4: Configuration......................................................................................................... |
21 |
Status ..................................................................................................................................... |
22 |
ADSL Status ....................................................................................................................... |
22 |
3G Status............................................................................................................................ |
23 |
EWAN Status...................................................................................................................... |
24 |
iBurst Status ....................................................................................................................... |
25 |
ARP Table........................................................................................................................... |
26 |
DHCP Table ........................................................................................................................ |
27 |
Routing Table...................................................................................................................... |
28 |
NAT Sessions ..................................................................................................................... |
29 |
UPnP Portmap.................................................................................................................... |
29 |
PPTP Status ....................................................................................................................... |
30 |
IPSec Status ....................................................................................................................... |
30 |
L2TP Status ........................................................................................................................ |
31 |
Email Status........................................................................................................................ |
31 |
Event Log ........................................................................................................................... |
32 |
Error Log............................................................................................................................. |
33 |
Diagnostic........................................................................................................................... |
34 |
Quick Start.............................................................................................................................. |
35 |
Configuration.......................................................................................................................... |
39 |
LAN - Local Area Network .................................................................................................. |
40 |
Bridge Interface............................................................................................................... |
40 |
Ethernet .......................................................................................................................... |
41 |
IP Alias ............................................................................................................................ |
41 |
IPv6 Autoconfig ............................................................................................................... |
42 |
Ethernet Client Filter ....................................................................................................... |
43 |
Wireless (Wireless Router only)...................................................................................... |
44 |
Wireless Security (Wireless Router only) ........................................................................ |
46 |
Wireless Client / MAC Address Filter (Wireless Router only) .......................................... |
48 |
|
1 |
WPS (Wireless Router only) ........................................................................................... |
49 |
Port Setting ..................................................................................................................... |
59 |
DHCP Server .................................................................................................................. |
60 |
WAN - Wide Area Network ................................................................................................. |
61 |
WAN Interface................................................................................................................. |
61 |
WAN Profile..................................................................................................................... |
64 |
ADSL Mode..................................................................................................................... |
81 |
System................................................................................................................................ |
82 |
Time Zone ....................................................................................................................... |
82 |
Remote Access ............................................................................................................... |
83 |
Firmware Upgrade .......................................................................................................... |
84 |
Backup / Restore............................................................................................................. |
85 |
Restart Router................................................................................................................. |
86 |
User Management........................................................................................................... |
87 |
Mail Alert ......................................................................................................................... |
89 |
Firewall and Access Control ............................................................................................... |
90 |
General Settings ............................................................................................................. |
91 |
Packet Filter .................................................................................................................... |
92 |
Intrusion Detection .......................................................................................................... |
99 |
URL Filter ...................................................................................................................... |
101 |
IM / P2P Blocking.......................................................................................................... |
103 |
Firewall Log................................................................................................................... |
104 |
VPN - Virtual Private Networks......................................................................................... |
105 |
PPTP (Point-to-Point Tunneling Protocol) ..................................................................... |
105 |
IPSec (IP Security Protocol).......................................................................................... |
113 |
L2TP (Layer Two Tunneling Protocol) ........................................................................... |
122 |
QoS - Quality of Service ................................................................................................... |
134 |
Prioritization .................................................................................................................. |
134 |
Outbound IP Throttling (LAN to WAN)........................................................................... |
136 |
Inbound IP Throttling (WAN to LAN) ............................................................................. |
137 |
Virtual Server (known as Port Forwarding) ....................................................................... |
143 |
Add Virtual Server ......................................................................................................... |
144 |
Edit DMZ Host............................................................................................................... |
146 |
Edit One-to-One NAT (Network Address Translation) ................................................... |
147 |
Wake on LAN.................................................................................................................... |
150 |
Time Schedule.................................................................................................................. |
151 |
Configuration of Time Schedule .................................................................................... |
152 |
Advanced.......................................................................................................................... |
153 |
Static Route................................................................................................................... |
153 |
Static ARP ..................................................................................................................... |
153 |
Dynamic DNS................................................................................................................ |
153 |
Check Email.................................................................................................................. |
155 |
Device Management ..................................................................................................... |
156 |
IGMP............................................................................................................................. |
159 |
MLD .............................................................................................................................. |
159 |
VLAN Bridge ................................................................................................................. |
160 |
Logout .................................................................................................................................. |
160 |
Chapter 5: Troubleshooting .................................................................................................. |
161 |
Problems starting up the router ............................................................................................ |
161 |
Problems with the WAN Interface......................................................................................... |
161 |
Problems with the LAN Interface.......................................................................................... |
161 |
APPENDIX A: Product Support and Contact Information .................................................. |
162 |
|
2 |
Chapter 1: Introduction
Welcome to the 3G/ADSL2+ (802.11g) (VPN) Firewall Router. The router is an “all-in-one” ADSL router, combining an ADSL modem, ADSL router and Ethernet network switch functionalities, providing everything you need to get the machines on your network connected to the Internet over your ADSL broadband connection. With features such as an ADSL Quick-Start wizard and DHCP Server, you can be online in no time at all and with a minimum of fuss and configuration, catering for first-time users to the guru requiring advanced features and control over their Internet connection and network.
Express Internet Access
The router complies with ADSL worldwide standards. It supports downstream rate up to 12/24 Mbps with ADSL2/2+, 8Mbps with ADSL. Users enjoy not only high-speed ADSL services but also broadband multimedia applications such as interactive gaming, video streaming and real-time audio much easier and faster than ever. It is compliant with Multi-Mode standard (ANSI T1.413, Issue 2; G.dmt (ITU G.992.1); G.lite (ITU G.992.2); G.hs (ITU G994.1); G.dmt.bis (ITU G.992.3); G.dmt.bis.plus (ITU G.992.5)).
Virtual Private Network (VPN) (VPN model only)
It allows user to make a tunnel with a remote site directly to secure the data transmission among the connection. User can use embedded PPTP and L2TP client/server, IKE and IPSec which are supported by this router to make a VPN connection or users can run the PPTP client in PC and the router already provides IPSec and PPTP pass through function to establish a VPN connection if the user likes to run the PPTP client in his local computer.
3G
With 3G-based Internet connection (requires an additional 3G USB modem), user can access internet through 3G - whether you're seated at your desk or taking a cross-country train trip.
EWAN
Besides using 3G/ADSL to get connected to the Internet, the router offers its Ethernet port 1 as a WAN port to be used to connect to Cable Modems and fiber optic lines. This alternative, yet faster method to connect to the internet will provide users more flexibility to get online.
Dual WAN
Dual WAN is a new way of getting connected to the internet which is to use each two of the 3G/ADSL/EWAN to deal with the unexpected case and balance traffic load. That is a way of improving greatly the robustness.
802.11g Wireless AP with WPA Support (Wireless Router only)
With integrated 802.11g Wireless Access Point in the router, the device offers a quick and easy access among wired network, wireless network and broadband connection (ADSL) with single device simplicity, and as a result, mobility to the users. In addition to 54 Mbps 802.11g data rate, it also interoperates backward with existing 802.11b equipment. The Wi-Fi Protected Access (WPA1 and WPA2) and Wired Equivalent Privacy (WEP) supported features enhance the security level of data protection and access control via Wireless LAN.
Fast Ethernet Switch
A 4-port 10/100Mbps fast Ethernet switch is built in with automatic switching between MDI and MDI-X for 10Base-T and 100Base-TX ports. An Ethernet straight or crossover cable can be used directly for auto detection.
1
Multi-Protocol to Establish a Connection
It supports PPPoA (RFC 2364 - PPP over ATM Adaptation Layer 5), RFC 1483 encapsulation over ATM (bridged or routed), PPP over Ethernet (RFC 2516), and IPoA (RFC1577) to establish a connection with the ISP. The product also supports VC-based and LLC-based multiplexing.
Quick Installation Wizard
It supports a WEB GUI page to install this device quickly. With this wizard, end users can enter the information easily which they get from their ISP, then surf the Internet immediately.
Universal Plug and Play (UPnP) and UPnP NAT Traversal
This protocol is used to enable simple and robust connectivity among stand-alone devices and PCs from many different vendors. It makes network simple and affordable for users. UPnP architecture leverages TCP/IP and the Web to enable seamless proximity networking in addition to control and data transfer among networked devices. With this feature enabled, users can now connect to Net meeting or MSN Messenger seamlessly.
Network Address Translation (NAT)
Allows multi-users to access outside resources such as the Internet simultaneously with one IP address/one Internet access account. Many application layer gateway (ALG) are supported such as web browser, ICQ, FTP, Telnet, E-mail, News, Net2phone, Ping, NetMeeting, IP phone and others.
SOHO Firewall Security with DoS and SPI
Along with the built-in NAT natural firewall feature, the router also provides advanced hacker pattern-filtering protection. It can automatically detect and block Denial of Service (DoS) attacks. The router is built with Stateful Packet Inspection (SPI) to determine if a data packet is allowed through the firewall to the private LAN.
Domain Name System (DNS) Relay
It provides an easy way to map the domain name (a friendly name for users such as www.yahoo.com) and IP address. When a local machine sets its DNS server with this router’s IP address, every DNS conversion request packet from the PC to this router will be forwarded to the real DNS in the outside network.
Dynamic Domain Name System (DDNS)
The Dynamic DNS service allows you to alias a dynamic IP address to a static hostname. This dynamic IP address is the WAN IP address. For example, to use the service, you must first apply for an account from a DDNS service like http://www.dyndns.org/. More than 5 DDNS servers are supported.
Quality of Service (QoS)
QoS gives you full control over which types of outgoing data traffic should be given priority by the router, ensuring important data like gaming packets, customer information, or management information move through the router ay lightning speed, even under heavy load. The QoS features are configurable by source IP address, destination IP address, protocol, and port. You can throttle the speed at which different types of outgoing data pass through the router, to ensure P2P users don’t saturate upload bandwidth, or office browsing doesn’t bring client web serving to a halt. In addition, or alternatively, you can simply change the priority of different types of upload data and let the router sort out the actual speeds.
IPv6 supported
Internet Protocol version 6 (IPv6) is a version of the Internet Protocol that is designed to succeed IPv4.
IPv6 has a vastly larger address space than IPv4. This results from the use of a 128-bit address, whereas IPv4 uses only 32 bits. The new address space thus supports 2128 (about 3.4×1038) addresses. This expansion provides flexibility in allocating addresses and routing traffic and eliminates the primary need for network address translation (NAT), which gained widespread deployment as an effort to alleviate IPv4 address exhaustion.
IPv6 also implements new features that simplify aspects of address assignment (stateless address autoconfiguration) and network renumbering (prefix and router announcements) when changing
2
Internet connectivity providers. The IPv6 subnet size has been standardized by fixing the size of the host identifier portion of an address to 64 bits to facilitate an automatic mechanism for forming the host identifier from Link Layer media addressing information (MAC address).
Network security is integrated into the design of the IPv6 architecture. Internet Protocol Security (IPsec) was originally developed for IPv6, but found widespread optional deployment first in IPv4 (into which it was back-engineered). The IPv6 specifications mandate IPsec implementation as a fundamental interoperability requirement.
Virtual Server (“port forwarding”)
Users can specify some services to be visible from outside users. The router can detect incoming service requests and forward either a single port or a range of ports to the specific local computer to handle it. For example, a user can assign a PC in the LAN acting as a WEB server inside and expose it to the outside network. Outside users can browse inside web servers directly while it is protected by NAT. A DMZ host setting is also provided to a local computer exposed to the outside network, Internet.
Rich Packet Filtering
Not only filters the packet based on IP address, but also based on Port numbers. It will filter packets from and to the Internet, and also provides a higher level of security control.
Dynamic Host Configuration Protocol (DHCP) Client and Server
In the WAN site, the DHCP client can get an IP address from the Internet Service Provider (ISP) automatically. In the LAN site, the DHCP server can allocate a range of client IP addresses and distribute them including IP address, subnet mask as well as DNS IP address to local computers. It provides an easy way to manage the local IP network.
Static and RIP1/2 Routing
It has routing capability and supports easy static routing table or RIP1/2 routing protocol.
Simple Network Management Protocol (SNMP)
It is an easy way to remotely manage the router via SNMP.
Web based GUI
It supports web based GUI for configuration and management. It is user-friendly and comes with on-line help. It also supports remote management capability for remote users to configure and manage this product.
Firmware Upgradeable
Device can be upgraded to the latest firmware through the WEB based GUI.
Rich Management Interfaces
It supports flexible management interfaces with local console port, LAN port, and WAN port. Users can use terminal applications through the console port to configure and manage the device, or Telnet, WEB GUI, and SNMP through LAN or WAN ports to configure and manage the device.
3
Chapter 2: Installing the Router
3G/ADSL2+ (802.11g) (VPN) Firewall Router CD containing the online manual
RJ-11 ADSL/telephone Cable Ethernet Cable
Console tool kit Power adapter
A detachable antenna Quick Start Guide
4
Chapter 2: Installing the router
LED |
Meaning |
|
|
1Power
LAN Port
21X - 4X
(RJ-45 connector)
3USB
4Wireless(Wireless Router only)
5 Mail
6 DSL
7Internet
Both red and green LEDs lit together when power is ON.
Lit red means system failure. Restart the device or contact support. Lit green when the device is ready.
Lit when one of LAN ports connected to an Ethernet device.
The speed of transmission hits 100Mbps appears Green; The speed of transmission hits 10Mbps appears Orange.
Blinking when data is Transmitted / Received.
Lit when the device connected to a USB device. Flash when the device is sending/receiving data.
Lit green when the wireless connection is established. Flashes when the device is sending/receiving data.
Flash once per second while wi-fi protected setup is in progress.
Lit green when there are emails in the Inbox.
Lit Green when the device is successfully connected to an ADSL DSLAM. (“line sync”).
Lit red when WAN port fails to get IP address.
Lit green when WAN port gets IP address successfully.
Lit off when the device is in bridge mode or when WAN connection is absent.
5
Chapter 2: Installing the router
The Ethernet Port # 4 can be used as a console port. You need a special console tool which already includes in the package to connect with LAN port 4 and PC’s RS-232 port (9-pin serial port).
Port
Antenna
1(Wireless Router only)
2 DSL
3 USB
LAN
41X - 4X
(RJ-45 connector)
5WPS (Wireless Router only)
6RESET
7 Power
8 Power Switch
Meaning
Connect the detachable antenna to this port.
Connect the supplied RJ-11 (“telephone”) cable on this port when connecting to the ADSL/telephone network.
Connect the USB cable on this port.
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the LAN ports when connecting to a PC or an office/home network of 10Mbps or 100Mbps.
Caution: Port 4 can be either a LAN or Console port at a time but not both.
Push WPS button for less than 5 sec to trigger Wi-Fi Protected Setup function; push WPS button for more than 5 sec to enable/disable WLAN Service.
To be sure the device is being turned on. Press RESET button for:
1-3 seconds: quick reset the device.
6 seconds above, and power off, power on the device: restore to factory default settings. (Cannot login to the router or forgot your Username/Password. Press the button for more than 6 seconds).
Caution: After pressing the RESET button for more than 6 seconds, to be sure you power cycle the device again.
Connect the supplied power adapter to this jack. Power ON/OFF switch
6
Chapter 2: Installing the router
One of the most common causes of problems is the bad cabling or ADSL line(s). Make sure that all connected devices are turned on. On the front of the product is a bank of LEDs. Verify that the LAN Link and ADSL line LEDs are lit. If they are not, verify that you are using the proper cables.
Ensure that all other devices connected to the same telephone line as your router (e.g. telephones, fax machines, analogue modems) have a line filter connected between them and the wall socket (unless you are using a Central Splitter or Central Filter installed by a qualified and licensed electrician), and ensure that all line filters are correctly installed and the right way around. Missing line filters or line filters installed the wrong way around can cause problems with your ADSL connection, including causing frequent disconnections.
7
Chapter 2: Installing the router
(802.11g) ADSL2+ (VPN) Firewall Router
Chapter 3: Basic Installation
The router can be configured with your web browser. A web browser is included as a standard application in the following operating systems: Windows 7, Linux, Mac OS, Windows 98/NT/2000/XP/Me, etc. The product provides an easy and user-friendly interface for configuration.
Please check your PC’s network components. The TCP/IP protocol stack and Ethernet network adapter must be installed. If not, please refer to your Windows-related or other operating system manuals.
There are ways to connect with the router, either through an external repeater hub to the router or directly connecting with PCs. However, to be sure PCs have an Ethernet interface installed properly prior to connecting to the router device. You ought to configure your PCs to obtain an IP address through a DHCP server or a fixed IP address that must be in the same subnet as the router. The default IP address of the router is 192.168.1.254 and the subnet mask is 255.255.255.0 (i.e. any attached PC must be in the same subnet, and have an IP address in the range of 192.168.1.1 to 192.168.1.253). The best and easiest way is to configure the PC to get an IP address automatically from the router using DHCP. If you encounter any problem accessing the router’s web interface it may also be advisable to uninstall any kind of software firewall on your PCs, as they can cause problems accessing the 192.168.1.254 IP address of the router. Users should make their own decisions on how to best protect their network.
Please follow the steps below for your PC’s network environment installation.
Any TCP/IP capable workstation can be used to communicate with or through the router. To configure other types of workstations, please consult the manufacturer’s documentation.
8
Chapter 3: Basic Installation
(802.11g) ADSL2+ (VPN) Firewall Router
1.Connect this router to a LAN (Local Area Network) and the ADSL/telephone (ADSL) network.
2.Power on the device.
3.Make sure the Power is lit steadily and that the LAN LED is lit.
4.Connect RJ-11 cable to LINE Port when connecting to the telephone wall jack.
5.Connect USB 2.0 cable.
9
Chapter 3: Basic Installation
(802.11g) ADSL2+ (VPN) Firewall Router
1. Go to Start. Click on Control Panel. Then click on Network and Internet.
2.When the Network and Sharing Center window pops up, select and click on Change adapter settings on the left window panel.
3.Select the Local Area Connection, and right click the icon to select
Properties.
10
Chapter 3: Basic Installation
(802.11g) ADSL2+ (VPN) Firewall Router
4. Select Internet Protocol Version 4 (TCP/IPv4) then click Properties.
5.In the TCP/IPv4 properties window, select the Obtain an IP address automatically and Obtain DNS Server address automatically radio buttons. Then click OK to exit the setting.
6.Click OK again in the Local Area Connection Properties window to apply the new configuration.
11
Chapter 3: Basic Installation
(802.11g) ADSL2+ (VPN) Firewall Router
1.Go to Start. Click on Network.
2.Then click on Network and Sharing Center at the top bar
3.When the Network and Sharing Center window pops up, select and click on Manage network connections on the left window column.
4.Select the Local Area Connection, and right click the icon to select Properties.
12
Chapter 3: Basic Installation
(802.11g) ADSL2+ (VPN) Firewall Router
5. Select Internet Protocol Version
4 (TCP/IPv4) then click Properties.
6.In the TCP/IPv4 properties window, select the Obtain an IP address automatically and
Obtain DNS Server address automatically radio buttons. Then click OK to exit the setting.
7.Click OK again in the Local Area Connection Properties window to apply the new configuration
13
Chapter 3: Basic Installation
(802.11g) ADSL2+ (VPN) Firewall Router
1.Go to Start / Control Panel (in Classic View). In the Control Panel, double-click
Network Connections.
2.Double-click Local Area Connection.
(See Figure 3.1)
Figure 3.1: LAN Area Connection
3. In the LAN Area Connection Status window, click Properties. (See Figure 3.2)
Figure 3.2: LAN Connection Status
4. Select Internet Protocol (TCP/IP) and click Properties. (See Figure 3.3)
Figure 3.3: TCP / IP
5.Select the Obtain an IP address automatically and Obtain DNS server address automatically radio buttons. (See Figure 3.4)
6.Click OK to finish the configuration.
Figure 3.4: IP Address & DNS Configuration
14
Chapter 3: Basic Installation
(802.11g) ADSL2+ (VPN) Firewall Router
1.Go to Start / Settings / Control Panel. In the Control Panel, double-click Network and Dial-up Connections.
2.Double-click Local Area (“LAN”) Connection. (See Figure 3.5)
Figure 3.5: LAN Area Connection
3.In the LAN Area Connection Status window, click Properties. (See Figure
3.6)
Figure 3.6: LAN Connection Status
4.Select Internet Protocol (TCP/IP) and click Properties. (See Figure 3.7)
5.Select the Obtain an IP address automatically and Obtain DNS server address automatically radio buttons. (See Figure 3.8)
6.Click OK to finish the configuration.
Figure 3.7: TCP / IP
Figure 3.8: IP Address & DNS Configuration
15
Chapter 3: Basic Installation
(802.11g) ADSL2+ (VPN) Firewall Router
1.Go to Start / Settings / Control Panel. In the Control Panel, double-click Network and choose the
Configuration tab.
2.Select TCP / IP -> NE2000 Compatible, or the name of any Network Interface Card (NIC) in your PC. (See Figure 3.9)
3.Click Properties.
Figure 3.9: TCP / IP
4.Select the IP Address tab. In this page, click the Obtain an IP address automatically radio button. (See
Figure 3.10)
Figure 3.10: IP Address
5.Then select the DNS Configuration tab. (See Figure 3.11)
6.Select the Disable DNS radio button and click OK to finish the configuration.
Figure 3.11: DNS Configuration
16
Chapter 3: Basic Installation
(802.11g) ADSL2+ (VPN) Firewall Router
1.Go to Start / Settings / Control Panel. In the Control Panel, double-click Network and choose the
Protocols tab.
2.Select TCP/IP Protocol and click
Properties. (See Figure 3.12)
Figure 3.12: TCP / IP
3.Select the Obtain an IP address from a DHCP server radio button and click
OK. (See Figure 3.13)
Figure 3.13: IP Address
17
Chapter 3: Basic Installation
(802.11g) ADSL2+ (VPN) Firewall Router
Before configuring your router, you need to know the following default settings.
Web Interface (Username and Password)
Username: admin
Password: admin
The default username and password are “admin” and “admin” respectively.
|
If you ever forget the username/password to login to the router, you may |
|
press the RESET button up to 6 seconds to restore the factory default |
|
settings. |
|
Caution: After pressing the RESET button for more than 6 seconds, to be sure you power |
Attention |
cycle the device again. |
Device LAN IP settings
IP Address: 192.168.1.254
Subnet Mask: 255.255.255.0
ISP setting in WAN site
PPPoE
DHCP server
DHCP server is enabled.
Start IP Address: 192.168.1.100
IP pool counts: 100
LAN and WAN Port Addresses
The parameters of LAN and WAN ports are pre-set in the factory. The default values are shown below.
LAN Port
IP address |
192.168.1.254 |
Subnet Mask |
255.255.255.0 |
DHCP server function |
Enabled |
|
|
IP addresses for |
100 IP addresses continuing from |
distribution to PCs |
192.168.1.100 through 192.168.1.199 |
WAN Port
The PPPoE function is enabled to automatically get the WAN port configuration from the ISP.
18
Chapter 3: Basic Installation
(802.11g) ADSL2+ (VPN) Firewall Router
Before configuring this device, you have to check with your ISP (Internet Service Provider) to find out what kind of service is provided such as DHCP (Obtain an IP Address Automatically, Static IP (Fixed IP Address) and PPPoE.
Gather the information as illustrated in the following table and keep it for reference.
PPPoE(RFC2516)
PPPoA(RFC2364)
MPoA(RFC1483/RF
C2684)
IPoA(RFC1577)
VPI/VCI, VC / LLC-based multiplexing, Username, Password, Service Name, and Domain Name System (DNS) IP address (it can be automatically assigned by your ISP when you connect or be set manually).
VPI/VCI, VC / LLC-based multiplexing, Username, Password and Domain Name System (DNS) IP address (it can be automatically assigned by your ISP when you connect or be set manually).
VPI/VCI, VC / LLC-based multiplexing, IP address, Subnet mask, Gateway address, and Domain Name System (DNS) IP address (it is a fixed IP address).
VPI/VCI, VC / LLC-based multiplexing, IP address, Subnet mask, Gateway address, and Domain Name System (DNS) IP address (it is a fixed IP address).
Pure Bridge |
VPI/VCI, VC / LLC-based multiplexing to use Bridged Mode. |
|
|
19
Chapter 3: Basic Installation
(802.11g) ADSL2+ (VPN) Firewall Router
Open your web browser, enter the IP address of your router, which by default is 192.168.1.254, and click “Go”, a user name and password window prompt will appear. The default username and password are “admin” and “admin” respectively. (See Figure 3.14)
Figure 3.14: User name & Password Prompt Window
Congratulations! You are now successfully logon to the Router!
20
Chapter 3: Basic Installation
(802.11g) ADSL2+ (VPN) Firewall Router
Chapter 4: Configuration
At the configuration homepage, the left navigation pane where bookmarks are provided links you directly to the desired setup page, including:
Status
-ADSL Status
-3G Status
-EWAN Status
-iBurst Status
-ARP Table
-DHCP Table
-Routing Table
-NAT Sessions
-UPnP Portmap
-PPTP Status
-IPSec Status
-L2TP Status
-Email Status
-Event Log
-Error Log
-IDS Log
-Diagnostic
Quick Start
Configuration
-LAN
-WAN
-System
-Firewall
-VPN
-QoS
-Virtual Server
-Wake on LAN
-Time Schedule
-Advanced
Language (provides user interface in English and French languages)
21
Chapter 4: Configuration
(802.11g) ADSL2+ (VPN) Firewall Router
This section displays the ADSL overall status, which shows a number of helpful information such as DSP firmware version.
22
Chapter 4: Configuration
(802.11g) ADSL2+ (VPN) Firewall Router
This section displays the 3G Card’s overall status, which shows you a number of helpful information such as the current signal strength and statistics on current and total bytes transferred and received.
Status: The current status of the 3G card.
Signal Strength: The signal strength bar indicates current 3G signal strength. Network Name: The network name that the device is connected to.
Card Name: The name of the 3G card.
Card Firmware: The current firmware for the 3G card.
Current TX Bytes / Packets: The statistics of transmission, count for this call. Current RX Bytes / Packets: The statistics of receive, count for this call.
Total TX Bytes / Packets: The statistics of transmission, count from system ready. Total RX Bytes / Packets: The statistics of receive, count from system ready. Current Connection Time: The duration for the current connection.
Total Connection Time: The cumulative connection time.
23
Chapter 4: Configuration
(802.11g) ADSL2+ (VPN) Firewall Router
Amount used: Show the traffic or hours has been used.
Billing period: The day from which the fee is charged.
Note: Only after you have checked to enable Usage Allowance, the following information will be shown.
Besides using 3G/ADSL to get connected to the Internet, the router offers its Ethernet port 1 as a WAN port to be used to connect to Cable Modems and fiber optic lines. This alternative, yet faster method to connect to the internet will provide users more flexibility to get online.
Total TX Bytes / Packets: The statistics of total data transmission in bytes / packets since system ready.
Total RX Bytes / Packets: The statistics of total data received in bytes / packets since system ready.
24
Chapter 4: Configuration
(802.11g) ADSL2+ (VPN) Firewall Router
Displays additional information of the 3G status when iBurst function is enabled in the 3G configuration such as its signal strength, card name, connection status and port class Ethernet.
Card Name: The name of the card.
Signal Strength: The signal strength bar indicates the current signal strength.
Current TX Bytes / Packets: The statistics of data transmission in bytes / packets during a call. Current RX Bytes / Packets: The statistics of data received in bytes / packets during a call.
Total TX Bytes / Packets: The statistics of total data transmission in bytes / packets since system ready. Total RX Bytes / Packets: The statistics of total data received in bytes / packets since system ready.
25
Chapter 4: Configuration
(802.11g) ADSL2+ (VPN) Firewall Router
This section displays the router’s ARP (Address Resolution Protocol) Table, which shows the mapping of Internet (IP) addresses to Ethernet (MAC) addresses. This is useful as a quick way of determining the MAC address of the network interface of your PCs to use with the router’s Firewall - MAC Address Filter function. See the Firewall section of this manual for more information on this feature.
IP Address: A list of IP addresses of devices on your LAN (Local Area Network).
MAC Address: The MAC (Media Access Control) addresses for each device on your LAN. Interface: The interface name (on the router) that this IP Address connects to.
Static: Static status of the ARP table entry:
“no” for dynamically-generated ARP table entries. “yes” for static ARP table entries added by the user.
26
Chapter 4: Configuration
(802.11g) ADSL2+ (VPN) Firewall Router
Leased: The DHCP assigned IP addresses information.
Expired: The expired IP addresses information.
Permanent: The fixed host mapping information
Leased Table
IP Address: The IP address that assigned to client.
MAC Address: The MAC address of client.
Client Host Name: The Host Name (Computer Name) of client.
Expiry: The current lease time of client.
27
Chapter 4: Configuration