Bifinett KH 1220 User Manual [hu]

4A

KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM

www.kompernass.com

ID-Nr.: KH1220-05/08-V2

WINE COOLER

KH1220

WINE COOLER

Operating instructions

CHŁODZIARKA DO WINA

Instrukcja obsługi

BORTEMPERÁLÓ SZEKRÉNY

Használati utasítás

KH 1220

0

1

2

3

4

5

6

7

8

9

q

w

CONTENT PAGE

Intended Use 2
Safety instructions 2
Technical data 3
Description of the appliance 3
Before the First Use 3

Assembling the adjustable feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Assembling the spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Placement of the bottle grill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Operation 4

Temperature control of wine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Illumination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Recommended temperatures 5
Cleaning and Care 5
Troubleshooting 6
Disposal 7
Importer 7
Warranty and Service 7

Read the operating instructions carefully before using the appliance for the first time and preserve this
booklet for later reference. Pass the manual on to whomsoever might acquire the appliance at a later date.

- 1 -

WINE COOLER KH1220

Intended Use

This appliance is intended exclusively for the cooling
of sealed bottles of wine, or similar beverages in
bottles, in the indoor rooms of domestic households.
The appliance is not designed for use in commercial
or industrial applications.

Please take note that this wine cooler is to be used
exclusively for the storing of sealed bottles of wine.
The appliance is not suitable for storing unsealed
bottles of wine and unpacked or opened food
products!

Safety instructions

Risk of electric shock!

• Do not use the appliance outdoors.

NEVER submerse the appliance in water or
other liquids!

• Arrange for defective power plugs and/or cables
to be replaced at once by qualified technicians
or our Customer Service Department.

• Do not fold or crush the power cable. Keep the
power cable well away from sources of heat.

• NEVER grasp the power cable or the power
plug with wet hands.

Risk of personal injury!

• So that you can disconnect the appliance quickly in
the event of an emergency, do not use extension
cables.

• This appliance is not intended for use by individuals
(including children) with restricted physical,
physiological or intellectual abilities or deficiences
in experience and/or knowledge unless they
are supervised by a person responsible for their
safety or receive from this person instruction in
how the appliance is to be used.

• Children should be supervised to ensure that
they do not play with the appliance..

Important! Appliance Damage!

• Do NOT place vases or other containers filled
with liquids on the appliance!

• Ensure that the ventilation slits of the appliance
are not covered when it is in use. Risk of over­heating! Maintain a clear distance of approx.
15 cm between the ventilation slits and other
objects.

• Do NOT operate the appliance in areas with
high humidity (bathrooms etc.) or in spaces where
explosive or easily inflammable materials or gases
are stored. Rooms which may have poor air
circulation, e.g. garages, are also unsuitable.

• Transport the cooler cabinet ONLY when it is
empty. Remove all bottles before the transportation.

• Do NOT place the appliance close to open flames
or other sources of heat (heating, direct sunlight,
gas stoves etc.).

• NEVER place the appliance in a built-in cupboard,
recesses or similar.

• This appliance is equipped with non-slip rubber
feet. As furniture surfaces are made of a variety
of materials and are treated with many different
types of cleaning agents, it cannot be completely
ruled out that some of these substances may
contain ingredients which could corrode the rubber
rests and soften them. If possible place an anti­slip material under the feet of the device.

- 2 -

Technical data

Assembling the spacer

Rated voltage: 220 - 240 V ~50Hz
max. Power consumption: 70 W
Temperature range : 4 - 22°C
LED-Class: 1

Description of the appliance

1 Display
2 Temperature increase button
3 Temperature decrease button
4 Light button
5 ON/OFF button
6 Door
7 Grip
8 Power cable with power plug
9 Adjustable feet
0 Bottle grill
q Ventilator
w Spacer

Before the First Use

Assembling the adjustable feet

To assemble the adjustable feet 9 it is best to lay
the cooler cabinet on its side.

Note:
One of the adjustable feet 9 is somewhat shorter
than the other three. This adjustable foot must be
screwed into the threaded hole located to the front
right of the hinge retainer.

• Screw the adjustable feet 9 into the designated

threaded holes at the corners on the underside
of the appliance.

Important!

NEVER operate the appliance without the spacer w!
The ventilation slits could become covered. This
would lead to overheating and cause irreparable
damage to the appliance.

• Screw the spacer w onto the rear of the cooler
cabinet, as shown on the fold-out side.

Placement of the bottle grill

• Slide the bottle grill 0 into the guide rails.
Ensure that the recesses for the bottles point
downwards.

Note:

• Slide the bottle grills 0 along the guide rails until

they engage. If the bottle grills 0 do not engage,
they have been inserted the wrong way round.

• You can also stand the bottles upright in the wine

cooler cabinet. To do this, remove the bottle grills 0.

Placement

Important!

When the appliance is in use, ensure that the venti­lation slits and the ventilator q cannot be covered.
Risk of overheating! Maintain a clear distance of
approx. 15 cm between the ventilation slits and
other objects.

Place the wine cooler cabinet on to a clean and
level surface.

Should the wine cooler cabinet sway a little, the
unevenness of the footprint can be levelled by cali­bration of the adjustment feet 9. For this, turn the
appropriate adjustment foot 9 until the wine cooler
cabinet is standing firmly.

- 3 -