®
Nexia® CS
DSP Conference System
Nexia CS is a digital signal processor with 10 mic/line inputs and 6 mic/line outputs. Intended for a variety of conferencing applications such as boardrooms, courtrooms, and council chambers, Nexia CS includes a broad selection of audio components, routing options, and signal processing. The internal system design is completely user definable via PC software, and can be controlled via daVinci™ software screens, RS-232 control systems, and/or a variety of optional remote control devices. Multi-unit Nexia systems can be created utilizing Ethernet and NexLink digital audio linking.
FEATURES
•10 balanced mic/line inputs on plug-in barrier strip
•6 balanced mic/line outputs on plug-in barrier strip
•Ethernet port for software configuration/control
•serial port for third-party RS-232 remote control
•remote control bus for dedicated control panels
•NexLink ports for multi-unit system designs
•Nexia software for Windows® XP Professional/Vista
•pre-configured I/O with definable processing
•mix, route, combine, EQ, delay, control, etc.
•RoHS compliance and AES grounding practices
•CE marked and UL listed
•covered by Biamp Systems' five-year warranty
•Ability to select, view, and calibrate:
-Mixers: standard, automatic, matrix, combiners
-Equalizers: graphic, parametric, feedback
-Filters: HPF, LPF, high shelf, low shelf, all-pass
-Crossovers: 2-Way, 3-Way and 4-way
-Dynamics: leveler, comp/limiter, ducker, ANC
-Routers: 2x1 ~ 32x32
-Delays: 0 ~ 2000 ms
-Controls: levels, presets, logic, RS-232, etc.
-Meters: signal present, peak, RMS
-Generators: tone, pink-noise, white-noise
-Diagnostics: transfer function
ARCHITECTS & ENGINEERS SPECIFICATION
The DSP conference system shall provide ten balanced mic/line inputs and six balanced mic/line outputs on plug-in barrier-strip connectors. Inputs and outputs shall be analog, with internal 24-bit A/D & D/A converters operating at a sample rate of 48kHz. All internal processing shall be digital (DSP). NexLink connections shall allow sharing of digital audio within multi-unit systems.
Software shall be provided for creating/connecting DSP system components within each hardware unit. Available system components shall include (but not be limited to) various forms of: mixers, equalizers, filters, crossovers, dynamics/gain controls, routers, delays, remote controls, meters, generators, and diagnostics. Ethernet communications shall be utilized for software control and configuration. After initial programming, processors may be controlled via dedicated software screens, third-party RS-232 control systems, and/or optional remote control devices. Software shall operate on a PC computer, with network card installed, running Windows® XP Professional/Vista. The DSP conference system shall be CE marked, UL listed, and shall incorporate AES48-2005 Grounding & EMC practices. The DSP conference system shall be compliant with EU Directive 2002/95/EC, the RoHS directive. Warranty shall be 5 years.
The DSP conference system shall be Nexia® CS.
Biamp Systems, 10074 S.W. Arctic Drive, Beaverton, Oregon 97005 U.S.A. (503) 641-7287 www.biamp.com
Loading...