Page 1
TL 30
G Bright light
Instruction for Use
ELECTROMAGNETIC COMPATIBILITY
INFORMATION
ELECTROMAGNETIC COMPATIBILITY
INFORMATION .................................... 64-66
Distributed by: BEURER GmbH • Söflinger Str. 218 • 89077 Ulm (Germany)
EC|REP
CARLA Sarl • Zone Artisanale • F-67570 La Claquette • France
.............................. 8–13
....................................... 63 – 66
Taishan Anson Electrical Appliances Co. Ltd • Dragon Mountain Industrial Estate
Duanfen • Taishan, Guangdong Province, China
Tel.: +49 (0) 731 / 39 89-144 • Fax: +49 (0) 731 / 39 89-255
www.beurer.com • Mail: kd@beurer.de
0197
Page 2
ENGLISH
1. About the daylight lamp
Dear valued customer,
Thank you for choosing one of our products. Our name stands for high-quality, thoroughly tested products for
applications in the areas of heat, weight, blood pressure, body temperature, pulse, gentle therapy, massage and
air.
With kind regards
Your Beurer team
Why use a daylight lamp?
When the hours of daylight are noticeably decreased in autumn and people increasingly stay inside, the effects
of a lack of light may cumulate. This is often described as „winter depression“. The symptoms can present themselves in a number of ways:
• Imbalance • Need for more sleep
• Subdued mood • Loss of appetite
• Lack of energy and listlessness • Difficulty concentrating
• Generally feeling under the weather
The cause of these symptoms is the fact that light, particularly sunlight, is essential for life and has a direct effect
upon the human body. Sunlight indirectly controls the production of melatonin, which is released into the blood
only in darkness. This hormone tells the body when it is time to sleep. In the months when there is less sunlight,
therefore, production of melatonin increases. This makes it harder to get up in the morning, since the body‘s
functions are shut down. If you use the daylight lamp immediately after waking up in the morning—thus as early
as possible—you can end the production of melatonin so that your mood takes a positive turn. In addition, light
deficiency also hinders production of the happiness hormone serotonin, which decisively affects our well-being.
So application of light involves quantitative changes in hormones and neurotransmitters in the brain, which can
affect our level of activity, our feelings and our well-being. Light can help reverse this hormone imbalance. To
compensate for such a hormonal imbalance, the brightlight creates a suitable replacement for natural sunlight.
In the medical field, brightlights are used to compensate for the effects of a lack of light. Brightlights simulate
daylight over 10,000 lux (10 cm distance). The light can influence the human body and be used as a treatment or
as a preventative measure. Normal electric light is not sufficient to influence the hormonal balance. Because in a
well-lit office the illuminance level amounts to just 500 lux.
Included in delivery: • Daylight lamp
• Holder
• Storage pouch
• Mains part
• These operating instructions
2. Signs and symbols
The following symbols appear in these instructions or on the device.
Read the instructions of use
Note
Warning instruction indicating a risk of injury or
damage to health.
Warning
Safety note indicating possible damage to the
unit/accessory.
Important
SN
Serial number OFF / ON
8
Note on important information
Manufacturer
Device in protection class 2
Page 3
The CE labelling certifies that the product complies with the essential requirements of Directive
93/42/EEC on medical products.
Date of manufacture
IP21
IP22
Protected against foreign objects
equal to or greater than 12.5 mm
in diameter and against vertically
falling drops of water.
Protected against foreign objects
equal to or greater than 12.5 mm
and against angular falling drops
of water
3. Notes
Please read these instructions for use carefully and keep them for later use, be sure to make them accessible to
other users and observe the information they contain.
Safety notes
Warning
• The light of the daylight lamp is only intended for use on the human body.
• Before use, ensure that all packaging materials are removed and that there is no visible damage to the unit
or accessories. When in doubt, do not use the unit and contact your dealer or the customer service address provided.
• Also ensure that the daylight lamp has a firm footing.
• Connect the unit only to the mains voltage listed on the type plate.
• Do not dip the unit into water and do not use it in wet rooms.
•
Do not use it in the vicinity of people who are helpless, children under age 3 or people who are insensitive
to heat (people with skin lesions due to illness); do not use after taking painkillers or drugs or drinking alcohol.
• Keep children away from packaging materials (risk of suffocation).
• Do not cover up or pack away the unit while it is warm.
• Always unplug the mains part and allow the device to cool down before touching it.
• Do not touch the unit with wet hands while it is plugged in; do not allow any water to be sprayed onto the
unit. The unit must be operated only when it is completely dry.
• Ensure that you only insert and remove the mains part with dry hands and that you only press the ON/OFF
button with dry hands.
• Keep the mains cable away from hot objects and naked flames.
• Protect the unit from strong impacts.
• Do not pull the mains part out of the socket using the mains cable.
• If the mains part or its housing is damaged, this must be replaced by customer services or the retailer, as
a special tool is needed for repair.
• Disconnection from the power supply network is only guaranteed when the mains part is unplugged.
•
Do not use the device in the presence of flammable anaesthetic gas connections with air, oxygen or nitrogen oxide.
• No calibration and no preventative checks or maintenance is to be carried out on this device.
• You cannot repair the device. The device contains no parts that you can repair.
• Do not make any changes to the device without the manufacturer’s permission.
• If the device has been changed, thorough tests and checks must be carried out to ensure the continued
safety of further use of the device.
General notes
Important
• If you are taking medication such as pain relievers, antihypertensives or antidepressants, consult your
doctor before using the daylight lamp.
• People with retinal diseases as well as diabetics need to be examined by an ophthalmologist before beginning to use the daylight lamp.
• Please do not use if you have an eye disease such as cataracts, glaucoma, diseases of the optic nerve in
general and inflammation of the vitreous humour.
• If you have health concerns of any kind, contact your general practitioner!
• Before you use the unit for the first time, remove all packaging materials.
• The lamp tubes are excluded from the warranty.
9
Page 4
Repairs
Important
• Do not open the device. Please do not attempt to repair the unit yourself. This could result in serious injuries. Failure to observe this regulation shall void the warranty.
• If you need to have the unit repaired, contact customer service or an authorised dealer.
4. Unit description
Overview
1. Fluorescent screen
2. Rear of the device housing
3. Holder
4. ON/OFF button
5. Mains part connection
6. Storage slot for holder
6
4
2
3
6
1
5
5. Initial use
Take the device out of the plastic wrapping. Check the device for damage or faults. If you notice any damage or
faults on the device, do not use it and contact customer services or your supplier.
Positioning the device
Place the device on an even surface. The position should be chosen to ensure a distance of between 20cm and
60cm between the user and the device. The lamp is most effective at this distance.
Mains connection
• To prevent possible damage to the device, the brightlight must only be used with the mains part described here.
• Insert the mains part into the connection provided for this purpose on the rear of the brightlight. The
mains part must only be connected to the mains voltage that is specified on the type plate.
• After using the brightlight, unplug the mains part from the mains socket first and then disconnect it from
the brightlight.
Note:
• Ensure that there is a socket near the place where the lamp will stand.
• Lay the mains cable in such a way that no one can trip over it.
6. Operation
Remove the holder from the storage slot on the rear of the device.
1
Clip on the holder at the side. The orientation/angle of the TL30 changes depending on where you at-
2
tach the holder to the device. This allows you to tailor the angle as desired. The holder can be attached
on both the long and short sides, which enables you to use the TL30 both horizontally and vertically.
3 Switching on the lamp
Press the On/Off button.
10
Page 5
4 Enjoying the light
Sit as close as possible to the lamp, between 20 cm and 60 cm. You can go about your normal activities
while using it. You can read, write, make telephone calls, etc.
• Every so often, briefly look directly into the light, since the effect results from the eyes/ retina receiving
the light.
• Use the brightlight as often as you want. However, the treatment is at its most effective if you carry
out the light therapy according to the prescribed time period of at least 7 successive days.
• The most effective time of day for the treatment is between 6am and 8pm
and we recommend that it is used for 2 hours per day.
• Do not look directly into the light the whole time you are using it, however, since that could lead to
overstimulation of the retina.
• Start with shorter periods of illumination, which you increase over the course of a week.
Note:
Eye aches and headaches may arise after the first times using the lamp. These will go
away in later sessions, as the nervous system will become accustomed to the new stimulation.
5 Important instructions
When using the lamp, maintain the recommended distance of 20 - 60 cm between your face and the
lamp. The duration of the application depends on the distance:
Distance Duration
Up to 20 cm ½ hour/day
Up to 40 cm 1 hour/day
Up to 60 cm 2 hours/day
Basically, the closer you are to the source of light, the less time you should use it.
6 Enjoying light over longer periods
Repeat your use of the lamp in the dark seasons for at least 7 successive days, or even longer, depending on your individual needs. If possible, conduct the treatment in the morning hours.
7 Switching off the lamp
Press the On/Off button. The LEDs switch off. Unplug the mains part from the mains socket.
CAUTION!
The light remains hot after use.. Let the lamp cool off first long enough before you put it away and/or pack
it up!
7. Cleaning and care of the unit
The unit should be cleaned occasionally.
Important
• Ensure that no water penetrates inside the unit!
Before you clean the unit, always switch it off, unplug it and let it cool off.
• Do not wash the unit in a washing machine!
Use a slightly damp cloth to clean the device.
• Do not touch the unit with wet hands while it is plugged in; do not allow any water to be sprayed onto the
unit. The unit must be operated only when it is completely dry.
Do not use abrasive detergents and never immerse the unit in water.
8. Storage
If you are not going to use the device for an extended period of time, disconnect it and store it in a dry place, out
of the reach of children.
Follow the storage instructions provided in the “Technical data” chapter.
11
Page 6
9. Disposal
For environmental reasons, do not dispose of the device in the household waste at the end of its useful life.
Dispose of the unit at a suitable local collection or recycling point. Dispose of the device in accordance
with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If you have any questions, please
contact the local authorities responsible for waste disposal.
10. What if there are problems?
Problem Possible cause Solution
Device does not
light up
On/off button switched off Switch on the on/off button.
No electricity Connect the mains part properly.
No electricity The mains part is faulty. Contact cus-
LEDs have r
LEDs faulty.
eached the end of their service life.
tomer services or your retailer.
If you need to have the unit repaired,
contact customer service or an authorised dealer.
11. Technical specifications
Model no. TL 30
Type WL 11
Dimensions (WHD) 236 x 156 x 20 mm (26 mm incl. storage slot)
Weight 175 g (260 g incl. mains adapter + storage pouch)
Lighting elements LED
Power 5 Watts
Light intensity 10.000 lux (10 cm)
Radiation Output of radiation beyond the visible spectrum (infrared and UV) is
Operating conditions 0°C to +35°C, 15 - 90 % relative humidity
Storage conditions -20°C to +50°C, 15 - 90 % relative humidity
Product classification External power supply, Protection class II, IP21
Color temperature of tubes 6.500 Kelvin
Included in delivery Daylight lamp, Holder, Storage pouch, Mains part, These operating
so low that it is harmless to eyes and skin.
instructions
Subject to technical modifications.
This device meets the requirements of the European Directive 93/42/EEC and 2007/47/EEC Medical Devices as
well as the Medical Devices Act.
This device complies with European Standard EN60601-1-2 and is subject to particular precautions with regard
to electromagnetic compatibility. Please note that portable and mobile HF communication systems may interfere
with this unit. More details can be requested from the stated Customer Service address or found at the end of
the instructions for use.
12
Page 7
12. Mains part
Model no. EE 16-08
Input
Output
Protection
Classification IP22, protection class II
100–240 V ~ 50/60 Hz
12 V DC, 650 mA, only in connection with TL 30
The device is double protected and therefore corresponds to protection class 2.
Polarity of the the DC voltage connection
13
Page 8
ELECTROMAGNETIC COMPATIBILITY INFORMATION
Technical Description Concerning Electromagnetic Emission
Table 1: Declaration - electromagnetic emissions
Guidance and manufacturer’s declaration - electromagnetic emissions
The model TL30 is intended for use in the electromagnetic environment specified below.
The customer or the user should assure that it is used in such an environment.
Emissions test Compliance Electromagnetic environment – guidance
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Group 1 The models TL30 use RF energy only for its inter
Class B The model TL30 is suitable for used in domestic
Class C
Not applicable
nal function. Therefore, its RF emissions are very
low and are not likely to cause any interference in
nearby electronic equipment.
establishment and in establishment directly con
nected to a low voltage power supply network
which supplies buildings used for domestic
purposes.
-
-
63
Page 9
Technical Description Concerning Electromagnetic Emission
Table 1: Declaration - electromagnetic emissions
Guidance and manufacturer’s declaration – electromagnetic immunity
The model TL30 is intended for use in the electromagnetic environment specified below.
The customer or the user should assure that It is used in such an environment.
Immunity test IEC 60601
test level
Electrostatic
discharge (ESD)
±6 kV contact
±8 kV air
Compliance
level
±6 kV contact
±8 kV air
lEC 61000-4-2
Electrical fast
transient/burst
IEC 61000-4-4
±2 kV for power
supply lines
±1 kV for input/output
±2 kV for power
supply lines
lines
Surge
lEC 61000-4-5
Voltage dips,
short interrup
tions and voltage variations
on power supp
ly input lines
IEC 61000-4-11
Power frequen
±1 kV line to line
±2 kV line to earth Mains power quality should be that
±2 kV line to earth
<5 % U
(>95% dip in UT)
T
for 0.5 cycle
40 % U
(60% dip in UT)
T
for 5 cycles
70% U
-
-
(30% dip in UT)
T
for 25 cycles
<5% U
(>95 % dip in UT)
T
for 5 sec
3 A/m Not applicable Not applicable
<5 % U
(>95% dip in UT)
T
for 0.5 cycle
40 % U
(60% dip in UT)
T
for 5 cycles
70% U
(30% dip in UT)
T
for 25 cycles
<5% U
(>95 % dip in UT)
T
for 5 sec
cy (50/60 Hz)
magnetic field
lEC 61000-4-8
NOTE U
is the a.c. mains voltage prior to application of the test level.
T
Electromagnetic environment –
guidance
Floors should be wood, concrete
or ceramic tile. If floors are covered
with synthetic material, the relative
humidity should be at least 30 %.
Mains power quality should be that
of a typical commercial or hospital
environment.
of a typical commercial or hospital
environment.
Mains power quality should be that
of a typical commercial or hospital
environment. If the user of the
model TL30 require continued ope
ration during power mains interruptions, it is recommended that the
model 168 DAYLUX Therapy Light
be powered from an uninterruptible
power supply or a battery.
64
Page 10
Table 3: Guidance & Declaration - electromagnetic immunity concerning Conducted RF & Radiated RF
Guidance and manufacturer’s declaration – electromagnetic immunity
The model TL30 is intended for use in the electromagnetic environment specified below.
The customer or the user should assure that it is used in such an environment.
Immunity test IEC 60601
test level
Compliance
level
Electromagnetic environment –
guidance
Portable and mobile RF communications
equipment should be used no closer to any
part of the model TL30, including cables,
than the recommended separation distance
calculated from the equation applicable to
the frequency of the transmitter.
Recommended separation distance
3 V
rms
3 V
3V
150 kHz to 80 MHz
Conducted RF lEC
d=1.2 P 80MHz to 800MHz
61000-4-6
Radiated RF lEC
61000-4-3
3 V/m
80 MHz to 2.5 GHz
3 V/m
d=2.3 P 800MHz to 2.5 GHz
where P is the maximum output power rating
of the transmitter In watts (W) according to
the transmitter manufacturer and d Is the
recommended separation distance in meters
(m).
Field strengths from fixed RF transmitters,
as determined by an electromagnetic site
a
survey,
should be less than the compliance
level in each frequency range.
b
Interference may occur In the vicinity of
equipment marked with the following sym
-
bol:
symbol:
NOTE 1 At 80 MHz end 800 MHz. the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorpti
on and reflection from structures, objects and people.
a
Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land
mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted theoreti
cally with accuracy. To assess the electromagnetic environment due to fixed RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the model
TL30 is used e
xceeds the applicable RF compliance level above, the model TL30 should be observed to
verify normal operation. If abnormal performance is observed, additional measures may be necessary, such
as reorienting or relocating the model TL30.
b
Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3V/m.
-
65
Page 11
Table 4: Recommended separation distances between portable and mobile RF communications
equipment and the model TL30
portable and mobile RF communications equipment and the model TL30
The model TL30 is intended for use in electromagnetic environment in which radiated RF disturbances is
controlled. The customer or the user of the model TL30 can help prevent electromagnetic interference by
maintaining a minimum distance between portable and mobile RF communications equipment (transmitters)
and the model TL30 as recommended below, according to the maximum output power of the communications
equipment.
Rated maximum output
power of transmitter
W
0.01 0.12 0.12 0.23
0.1 0.38 0.38 0.73
1 1.2 1.2 2.3
10 3.8 3.8 7.3
100 12 12 23
For transmitters rated at a maximum output power not listed above, the recommended separation distance d
in meters (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is
the maximum output power rating of the transmitter in watts (W) accordable to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz. the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorpti
on and reflection from structures, objects and people.
Recommended separation distances between
Separation distance according to frequency of transmitter
150 kHz to 80 MHz
1.2 P
m
80 MHz to 800 MHz
1.2 P
800 MHz to 2,5 GHz
2.3 P
-
66
Page 12
67
Page 13
68
751.695-1014 Irrtum und Änderungen vorbehalten
Loading...