This section provides the safety
instructions necessary to prevent the risk
of injury and material damage. Failure to
observe these instructions will invalidate
all types of product warranty.
Intended use
WARNING:
Keep ventilation openings, in
the appliance enclosure or in
A
A
A
A
the built-instructure, clear of
obstruction.
WARNING:
Do not use mechanical
devices or other means to
accelerate the defrosting
process, other than those
recommended by the
manufacturer.
WARNING:
Do not damage the refrigerant
circuit.
WARNING:
Do not use electrical
appliances inside the food
storage compartments of the
appliance, unless they are of
the type recommended by the
manufacturer.
1.1. General safety
• This product should not be used by
persons with physical, sensory and
mental disabilities, without sufficient
knowledge and experience or by
children. The device can only be used
by such persons under supervision
and instruction of a person responsible
for their safety. Children should not be
allowed to play with this device.
• In case of malfunction, unplug the
device.
• After unplugging, wait at least 5
minutes before plugging in again.
• Unplug the product when not in use.
• Do not touch the plug with wet hands!
Do not pull the cable to plug off, always
hold the plug.
• Do not plug in the refrigerator if the
socket is loose.
• Unplug the product during installation,
maintenance, cleaning and repair.
• If the product will not be used for a
while, unplug the product and remove
any food inside.
• Do not use the product when the
compartment with circuit cards located
on the upper back part of the product
(electrical card box cover) (1) is open.
This appliance is intended to be used in
household and similar applications such
as
– staff kitchen areas in shops, offices and
other working environments;
– farm houses and by clients in hotels,
motels and other residential type
environments;
– bed and breakfast type environments;
– catering and similar non-retail
applications.
Refrigerator / User Manual
1
1
3 / 31 EN
Safety and environment instructions
• Do not use steam or steamed cleaning
materials for cleaning the refrigerator
and melting the ice inside. Steam may
contact the electrified areas and cause
short circuit or electric shock!
• Do not wash the product by spraying or
pouring water on it! Danger of electric
shock!
• In case of malfunction, do not use
the product, as it may cause electric
shock. Contact the authorised service
before doing anything.
• Plug the product into an earthed
socket. Earthing must be done by a
qualified electrician.
• If the product has LED type lighting,
contact the authorised service for
replacing or in case of any problem.
• Do not touch frozen food with wet
hands! It may adhere to your hands!
• Do not place liquids in bottles and cans
into the freezer compartment. They
may explode.
• Place liquids in upright position after
tightly closing the lid.
• Do not spray flammable substances
near the product, as it may burn or
explode.
• Do not keep flammable materials and
products with flammable gas (sprays,
etc.) in the refrigerator.
• Do not place containers holding liquids
on top of the product. Splashing water
on an electrified part may cause
electric shock and risk of fire.
• Exposing the product to rain, snow,
sunlight and wind will cause electrical
danger. When relocating the product,
do not pull by holding the door handle.
The handle may come off.
• Take care to avoid trapping any part
of your hands or body in any of the
moving parts inside the product.
• Do not step or lean on the door,
drawers and similar parts of the
refrigerator. This will cause the product
to fall down and cause damage to the
parts.
• Take care not to trap the power cable.
1.1.1 HC warning
If the product comprises a cooling system
using R600a gas, take care to avoid
damaging the cooling system and its pipe
while using and moving the product. This
gas is flammable. If the cooling system
is damaged, keep the product away from
sources of fire and ventilate the room
immediately.
C
1.1.2 For models with
water dispenser
• Pressure for cold water inlet shall be
maximum 90 psi (6.2 bar). If your
water pressure exceeds 80 psi (5.5
bar), use a pressure limiting valve in
your mains system. If you do not know
how to check your water pressure, ask
for the help of a professional plumber.
• If there is risk of water hammer effect
in your installation, always use a water
hammer prevention equipment in
your installation. Consult Professional
plumbers if you are not sure that
4 / 31 EN
The label on the inner left
side indicates the type of gas
used in the product.
Refrigerator / User Manual
Safety and environment instructions
there is no water hammer effect in your
installation.
• Do not install on the hot water inlet.
Take precautions against of the risk of
freezing of the hoses. Water temperature
operating interval shall be 33°F (0.6°C)
minimum and 100°F (38°C) maximum.
• Use drinking water only.
1.2. Intended use
• This product is designed for home use. It
is not intended for commercial use.
• The product should be used to store
food and beverages only.
• Do not keep sensitive products requiring
controlled temperatures (vaccines, heat
sensitive medication, medical supplies,
etc.) in the refrigerator.
• The manufacturer assumes no
responsibility for any damage due to
misuse or mishandling.
• Original spare parts will be provided
for 10 years, following the product
purchasing date.
1.3. Child safety
• Keep packaging materials out of
children’s reach.
• Do not allow the children to play with the
product.
• If the product’s door comprises a lock,
keep the key out of children’s reach.
center for the recycling of electrical and electronic
equipment. Please consult your local authorities to
learn about these collection centers.
1.5. Compliance with RoHS Directive
• This product complies with EU
WEEE Directive (2011/65/EU).
It does not contain harmful and
prohibited materials specified in
the Directive.
1.6. Package information
• Packaging materials of the product
are manufactured from recyclable
materials in accordance with our
National Environment Regulations.
Do not dispose of the packaging
materials together with the
domestic or other wastes. Take
them to the packaging material
collection points designated by the
local authorities.
This product has been manufactured
with high quality parts and materials
which can be reused and are suitable
for recycling. Do not dispose of the
waste product with normal domestic
and other wastes at the end of its
service life. Take it to the collection
1.4. Compliance with WEEE Directive
and Disposing of the Waste Product
This product complies with EU WEEE
Directive (2012/19/EU). This product bears a
classification symbol for waste electrical and
electronic equipment (WEEE).
Refrigerator / User Manual
5 / 31 EN
*1
*3
*2
*5
*6
7
*8
9
4
A
B
2 Refrigerator
A- Cooler compartment
B- Freezer compartment
1. Butter-cheese shelf
2. Cooler compartment shelves
3. Shelter wire
*Optional: Figures in this user guide are schematic and may not exactly match your product. If your
product does not comprise the relevant parts, the information pertains to other models.
C
4. Frozen food storing compartments
5. Vegetable bins
6. Breakfast compartment
7. Odour filter
8. Adjustable glass shelves
9. Fan
6 / 31 EN
Refrigerator / User Manual
3 Installation
3.1. Right place for installation
Contact the Authorized Service for the product's
installation. To ready the product for installation,
see the information in the user guide and make
sure the electric and water utilities are as required.
If not, call an electrician and plumber to arrange
the utilities as necessary.
WARNING: The manufacturer assumes
no responsibility for any damage caused
B
B
A
•Placetheproductonaflatsurfacetoavoid
vibration.
•Placetheproductatleast30cmawayfromthe
heater, stove and similar sources of heat and at
least 5 cm away from electric ovens.
function efficiently. If the product will be placed
in an alcove, remember to leave at least 5 cm
distance between the product and the ceiling
and the walls.
must be unplugged during installation.
Failure to do so may result in death or
serious injuries!
WARNING: If the door span is too narrow
for the product to pass, remove the door
and turn the product sideways; if this does
not work, contact the authorized service.
3.2. Attaching the plastic wedges
Use the plastic wedges provided with the product
to provide sufficient space for air circulation
between the product and the wall.
1.
To attach the wedges, remove the screws on the
product and use the screws provided with the wedges.
2.
Attach 2 plastic wedges on the ventilation cover as
shown in the figure.
Refrigerator / User Manual
7 / 31 EN
Installation
3.3. Adjusting the stands
If the product is not in balanced position, adjust the
front adjustable stands by rotating right or left.
3.4. Power connection
WARNING: Do not use extension or
A
B
C
• Our firm will not assume responsibility for any
• The power cable plug must be easily
• Connect the refrigerator to an earthed socket
• Do not use multi-group plug with or without
multi sockets in power connection.
WARNING: Damaged power cable
must be replaced by Authorized
Service.
When placing two coolers in adjacent
position, leave at least 4 cm distance
between the two units.
damages due to usage without earthing and
power connection in compliance with national
regulations.
accessible after installation.
with 220-240V/50 Hz voltage. The socket must
comprise a 10-16A fuse.
extension cable between the wall socket and
the refrigerator.
3.5. Water connection
(Optional)
WARNING: Unplug the product and
the water pump (if available) during
A
The product’s water mains, filter and carboy
connections must be rendered by authorized
service.
The product can be connected to a carboy or
directly to the water mains, depending on the
model. To establish the connection, the water hose
must first be connected to the product.
Check to see the following parts are supplied with
your product’s model:
1
3
1. Connector (1 piece): Used to attach the water
2. Hose clip (3 pieces): Used to fix the water
3. Water hose (1 piece, 5 meter diameter 1/4
4. Faucet adapter (1 piece): Comprises a porous
5. Water filter (1 piece *Optional): Used to
connection.
2
4
hose to the rear of the product.
hose on the wall.
inches): Used for the water connection.
filter, used for connection to the cold water
mains.
connect the mains water to the product. Water
filter is not required if carboy connection is
available.
*5
8 / 31 EN
Refrigerator / User Manual
Installation
3.6. Connecting water
hose to the product
To connect the water hose to the product,
follow the instructions below.
1. Remove the connector on the hose nozzle
adaptor in the back of the product and run the
hose through the connector.
3.7. Connecting to water mains
(Optional)
To use the product by connecting to the cold water
mains, a standard 1/2” valve connector must be
installed to the cold water mains in your home. If
the connector is not available or if you are unsure,
consult a qualified plumber.
1. Detach the connector (1) from the faucet
adaptor (2).
2. Push the water hose down tightly and connect
to the hose nozzle adaptor.
3. Tighten the connector manually to fix on the
hose nozzle adaptor. You may also tighten the
connector using a pipe wrench or pliers.
23
2. Connect the faucet adaptor to the water mains
valve.
3. Attach the connector around the water hose.
1
Refrigerator / User Manual
9 / 31 EN
Installation
4. Attach the connector into the faucet adaptor
and tighten by hand / tool.
2. Connect the other end of the water hose to
the water pump by pushing the hose into the
pump’s hose inlet.
5. To avoid damaging, shifting or accidentally
disconnecting the hose, use the clips provided
to fix the water hose appropriately.
WARNING:After turning the faucet on,
make sure there is no water leak on
A
3.8. For products using water carboy
(Optional)
To use a carboy for the product’s water
connection, the water pump recommended by the
authorized service must be used.
1. Connect one end of the water hose provided
either end of the water hose. In case of
leakage, turn the valve off and tighten all
connections using a pipe wrench or pliers.
with the pump to the product (see 3. 6) and
follow the instructions below.
3. Place and fasten the pump hose inside the
carboy.
4. Once the connection is established, plug in
and start the water pump.
Please wait 2-3 minutes after starting the
C
C
C
3.9 Water filter
(Optional)
The product may have internal or external filter,
depending on the model. To attach the water filter,
follow the instructions below.
pump to achieve the desired efficiency.
See also the pump’s user guide for water
connection.
When using carboy, water filter is not
required.
10 / 31 EN
Refrigerator / User Manual
Installation
3.9.1. Fixing external filter
on the wall (Optional)
WARNING: Do not fix the filter on the
A
Check to see the following parts are supplied with
your product’s model:
1. Connector (1 piece): Used to attach the water
2. Faucet adapter (1 piece): Used for connection
3. Porous filter (1 piece)
4. Hose clip (3 pieces): Used to fix the water
5. Filter connecting apparatus (2 pieces): Used to
6. Water filter (1 piece): Used to connect the
product.
5
4
6
1
hose to the rear of the product.
to the cold water mains.
hose on the wall.
fix the filter on the wall.
mains water to the product. Water filter is not
required if carboy connection is available.
3
2
2. Determine the location to fix the external filter.
Fix the filter’s connecting apparatus (5) on the
wall.
3. Attach the filter in upright position on the filter
connecting apparatus, as indicated on the
label. ( 6 ).
1. Connect the faucet adaptor to the water mains
valve.
Refrigerator / User Manual
11 / 31 EN
4. Attach the water hose extending from the top
of the filter to the product’s water connection
adaptor (see. 3 6).
Installation
After the connection is established, it should look
like the figure below.
Water line:
3.9.2. Internal filter
The internal filter provided with the product is
not installed upon delivery; please follow the
instructions below to install the filter.
1. “Ice Off ” indicator must be active while
installing the filter. Switch the ON-OFF
indicator using the “Ice” button on the screen.
2. Remove the water filter by-pass cover by
pulling.
Carboy line:
A few drops of water may flow out after
C
3. Place the water filter cover into the
12 / 31 EN
removing the cover; this is normal.
mechanism and push to lock in place.
Refrigerator / User Manual
Installation
4. Push the “Ice” button on the screen again to
cancel the “Ice Off ” mode.
The water filter will clear certain foreign
particles in the water. It will not clear the
C
C
microorganisms in the water.
The filter replacement period of your
product is 6 months.
Refrigerator / User Manual
13 / 31 EN
4 Preparation
4.1. What to do for energy saving
Connecting the product to electronic
energy-saving systems is harmful, as it
A
• Do not keep the refrigerator doors open for
• Do not place hot food or beverages into the
• Do not overfill the refrigerator; blocking the
• To be able store maximum food in the freezer
• Depending on the product’s features;
• Make sure the foods are not in contact with
may damage the product.
long periods.
refrigerator.
internal air flow will reduce cooling capacity.
compartment of your refrigerator, the upper
drawers have to be removed and placed on
top of wire rack. The net volume and energy
consumption values specified in the energy
label of the refrigerator was tested after
removing the freezer compartment’s upper
shelf and the ice container which can easily
be removed manually. Using the lower drawer
while loading is highly recommended.
defrosting frozen foods in the cooler
compartment will ensure energy saving and
preserve food quality.
the cooler compartment temperature sensor
described below.
• Food must be stored in drawers inside the
cooler compartment in order to provide energy
saving and preserve the food in a better
ambient.
• Prevent direct contact between the
temperature sensor in the freezer compartment
and the food packages. Energy consumption
may increase in case of a contact with the
sensor.
4.2. First use
Before using your refrigerator, make sure the
necessary preparations are made in line with
the instructions in “Safety and environment
instructions” and “Installation” sections.
• Keep the product running with no food inside
for 6 hours and do not open the door, unless
absolutely necessary.
A sound will be heard when the
compressor is engaged. It is normal to
C
C
C
hear sound even when the compressor is
inactive, due to the compressed liquids and
gasses in the cooling system.
It is normal for the front edges of the
refrigerator to be warm. These areas are
designed to warm up in order to prevent
condensation.
In some models, indicator panel is dimmed
automatically 5 minutes after the door is
closed. It will be activated again when the
door is opened or any key is pressed.
14 / 31 EN
Refrigerator / User Manual
5 Using the product
5.1. Indicator panel
Indicator panels may vary depending on the model of your product.
Audio and visual functions of the indicator panel will assist in using the refrigerator.
8
9
1. Cooler compartment indicator
2. Error status indicator
3. Temperature indicator
4. Vacation function button
5. Temperature adjustment button
6. Compartment selection button
7. Freezer compartment indicator
8. Economy mode indicator
9. Vacation function indicator
*optional
1
7
2
6
3
45
*Optional: The figures in this user guide are intended as drafts and may not perfectly match your
product. If your product does not comprise the relevant parts, the information pertains to other models.
C
Refrigerator / User Manual
15 / 31 EN
Using the product
1. Cooler compartment indicator
The cooler compartment light will turn on when
adjusting the cooler compartment temperature.
2. Error status indicator
This sensor will activate if the refrigerator is not
cooling adequately or in case of sensor fault. When
this indicator is active, the freezer compartment
temperature indicator will display "E" and the
cooler compartment temperature indicator will
display "1, 2, 3..." etc. numbers. The numbers on
the indicator serve to inform the service personnel
about the fault. ( )
3. Temperature indicator
Indicates the temperature of the freezer and cooler
compartments.
4. Vacation function button
To activate this function, press and hold the
Vacation button for 3 seconds. When the Vacation
function is active, the cooler compartment
temperature indicator displays the inscription
"- -" and no cooling process will be active in
the cooling compartment. This function is not
suitable to keep food in the cooler compartment.
Other compartments will remain cooled with the
respective temperature set for each compartment.
Push the Vacation button () again to cancel
this function.
5. Temperature adjustment button
Respective compartment's temperature varies in
-24°C... -18°C and 8°C...1°C ranges. ( )
6. Compartment selection button
Use the refrigerator compartment selection
button to toggle between the cooler and freezer
compartments. ( )
7. Freezer compartment indicator
The freezer compartment light will turn on when
adjusting the freezer compartment temperature.
8. Economy mode indicator
Indicates the refrigerator is running on energysaving mode. This indicator will be active when the
temperature in the freezer compartment is set to
-18°C. ( )
9. Vacation function indicator
Indicates the vacation function is active. ( )
16 / 31 EN
Refrigerator / User Manual
Using the product
Indicator panel
This touch-control indicator panel allows you to set the temperature without opening the door of your
refrigerator. Just touch the relevant button with your finger to set the temperature.
2
1
3
11
7.1
7.2
8910
1- Economic use
2- High temperature / fault alert
3- Energy saving function (display off)
4- Rapid cooling
5- Vacation function
6- Cooler compartment temperature setting
7- Energy saving (display off) / Alarm off warning
8- Keypad lock
9- Eco-fuzzy
10- Freezer compartment temperature setting
11- Rapid freezing
56
4
*Optional: The figures in this user guide are intended as drafts and may not perfectly match your
product. If your product does not comprise the relevant parts, the information pertains to other models.
C
Refrigerator / User Manual
17 / 31 EN
Using the product
1. Economic use
This sign will light up when the freezer compartment is set to -18°C', the most economical
setting. ( ) Economic use indicator will turn off
when rapid cooling or rapid freezing function is
selected.
2. High temperature / fault alert
This indicator () will light up in case of
temperature faults or fault alerts.This indicator
illuminates during power failure, high temperature
failures and error warnings. During sustained
power failures, the highest temperature that the
freezer compartment reaches will flash on the
digital display. After checking the food located
in the freezer compartment press the alarm off
button to clear the warning.
3. Energy saving function (display off)
If the product doors are kept closed for a long time
energy saving function is automatically activated
and energy saving symbol is illuminated. When
energy saving function is activated, all symbols
on the display other than energy saving symbol
will turn off. When the Energy Saving function is
activated, if any button is pressed or the door is
opened, energy saving function will be cancelled
and the symbols on display will return to normal.
Energy saving function is activated during delivery
from factory and cannot be cancelled.
4. Rapid cooling
When the rapid cooling function is turned on, the rapid
cool indicator will light up ( ) and the cooler compartment temperature indicator will display the value 1.
Push the Rapid cool button again to cancel this function. The Rapid cool indicator will turn off and return
to normal setting. The rapid cooling function will be
automatically cancelled after 1 hour, unless cancelled
by the user. Too cool a large amount of fresh food,
press the rapid cool button before placing the food in
the cooler compartment.
5. Vacation function
To activate the Vacation function, press the
button for () 3 seconds; this will activate the
vacation mode indicator (). When the Vacation
function is active, the cooler compartment
temperature indicator displays the inscription
"- -" and no cooling process will be active in
the cooling compartment. This function is not
suitable to keep food in the cooler compartment.
Other compartments will remain cooled with the
respective temperature set for each compartment.
Push the vacation function button again to
cancel this function
6. Cooler compartment temperature setting
After pressing the button, the cooler compartment
temperature can be set to 8,7,6,5,4,3,2 and 1
respectively. ()
7.1. Energy saving (display off)
Pressing this button () will light up the energy
saving sign () and the Energy-saving function
will activate. Activating the energy-saving function
will turn off all other signs on the display. When
the energy-saving function is active, pressing any
button or opening the door will deactivate the
energy-saving function and the display signals will
return to normal. Pressing this button () again
will turn off the energy-saving sign and deactivate
the energy-saving function.
7.2.Alarm off warning:
In case of power failure/high temperature alarm,
after checking the food located in the freezer
compartment press the alarm off button to clear
the warning.
8. Keypad lock
Press the keypad lock button () simultaneously
for 3 seconds. The keypad lock sign
( ) will light up and the keypad lock will be
activated. The buttons will be inactive when the
Keypad lock is activated. Press the Keypad lock
button again simultaneously for 3 seconds. The
keypad lock sign will turn off and the keypad lock
mode will be disengaged.
Press the keypad lock button () to prevent
changing the refrigerator's temperature settings.
9. Eco-fuzzy
To activate the eco-fuzzy function, press and
hold the eco-fuzzy button for 1 second. When
this function is active, the freezer will switch to
18 / 31 EN
Refrigerator / User Manual
Using the product
the economic mode after at least 6 hours and the
economic use indicator will light up. To deactivate
the ( ) eco-fuzzy function, press and hold the ecofuzzy function button for 3 seconds.
The indicator will light up after 6 hours when the
eco-fuzzy function is active.
10. Freezer compartment temperature setting
The temperature in the freezer compartment is adjustable. Pressing the button will enable the freezer
compartment temperature to be set at -18,-19,
-20, -21, -22, -23 and -24. ()
11. Rapid freezing
For rapid freezing, press the button; this will activate the rapid freezing indicator ().
When the rapid freezing function is turned on, the
rapid freeze indicator will light up and the freezer
compartment temperature indicator will display
the value -27. Press the Rapid freeze button (
) again to cancel this function. The Rapid freeze
indicator will turn off and return to normal setting.
The rapid freezing function will be automatically
cancelled after 24 hours, unless cancelled by the
user. To freeze a large amount of fresh food, press
the rapid freeze button before placing the food in
the freezer compartment.
Refrigerator / User Manual
19 / 31 EN
Using the product
1
2
3
4
56
7.2
7.1
8910
11
12
11
1
10.1
10.2
(*)
4
2
3
1. Freezer compartment temperature setting
2. Economy mode
3- Energy saving function (display off)
*Optional: The figures in this user guide are intended as drafts and may not perfectly match your
product. If your product does not comprise the relevant parts, the information pertains to other models.
20 / 31 EN
Refrigerator / User Manual
Using the product
1. Freezer compartment temperature setting
Pressing the button () will enable the freezer
compartment temperature to be set at -18,-19,20,-21 ,-22,-23,-24,-18...
2. Economy mode
Indicates the refrigerator is running on energysaving mode. This indicator will be active when
the freezer compartment temperature is set at -18
or the energy-saving cooling is engaged by eco-
extra function. ()
3. Energy saving function (display off)
If the product doors are kept closed for a long time
energy saving function is automatically activated
and energy saving symbol is illuminated. When
energy saving function is activated, all symbols
on the display other than energy saving symbol
will turn off. When the Energy Saving function is
activated, if any button is pressed or the door is
opened, energy saving function will be cancelled
and the symbols on display will return to normal.
Energy saving function is activated during delivery
from factory and cannot be cancelled.
4. Error status
This sign will activate if the refrigerator is not
cooling adequately or in case of sensor fault. ()
When this indicator is activated, the freezer
compartment temperature indicator will display "E"
and the cooler compartment temperature indicator
will display "1, 2, 3..." etc. numbers. The numbers
on the indicator serve to inform the service
personnel about the fault.
5. Cooler compartment temperature setting
After pressing the button () , the cooler
compartment temperature can be set to
8,7,6,5,4,3,2... respectively.
6. Rapid cooling
For rapid cooling, press the button; this will
activate the rapid cooling indicator ().
Press this button again to deactivate this function.
Use this function when placing fresh foods into
the cooler compartment or to rapidly cool the
food items. When this function is activated, the
refrigerator will be engaged for 1 hour.
Refrigerator / User Manual
21 / 31 EN
7. Vacation function
When the Vacation function () is active, the
cooler compartment temperature indicator displays
the inscription "- -" and no cooling process
will be active in the cooling compartment. This
function is not suitable to keep food in the cooler
compartment. Other compartments will remain
cooled with the respective temperature set for
each compartment.
Press the vacation function button again to
cancel this function. ()
Press keypad lock button ( ) to activate the
keypad lock. You may also use this function to
prevent changing the refrigerator's temperature
settings. The refrigerator's filter must be replaced
every 6 months. If you follow the instructions in
the section 5.2, the refrigerator will automatically
calculate the remaining period and the filter
replacing alert indicator () will light up when
filter expires.
Press and hold the button () for 3 seconds to
turn off the filter alert light.
9. Ice making on/off
Press the button () to cancel () or
activate () ice-making.
10.1 Display on/off
Press the button to cancel () or
activate () display on/off.
10.2 Alarm off warning
In case of power failure/high temperature alarm,
after checking the food located in the freezer
compartment press the alarm off button to clear
the warning.
11. Autoeco
Press the auto eco button
(), for 3 seconds to activate this function. If
the door remains closed for a long time when this
function is activated, the cooler section will switch
to economic mode. Press the button again to
deactivate this function.
Using the product
The indicator will light up after 6 hours when the
auto eco function is active. ( )
12. Rapid freezing
Press the button
() for rapid freezing. Press the button again to
deactivate the function.
5.2. Zero degree compartment
(Optional)
Use this compartment to keep delicatessen
at lower temperatures or meat products for
immediate consumption. Do not place fruits and
vegetables in this compartment.
You can expand the product's internal volume by
removing any of the zero degree compartments.
To remove the compartment, simply pull forth, lift
up and pull out.
5.3. Vegetable bin
The refrigerator's vegetable bin is designed to
keep vegetables fresh by preserving humidity.
For this purpose, the overall cold air circulation
is intensified in the vegetable bin. Keep fruits
and vegetables in this compartment. Keep the
greenleaved vegetables and fruits separately to
prolong their life.
5.5. Description and
cleaning of odour filter
(Optional)
Odor filter prevents unpleasant odour build-up in
your product.
1. Pull the cover into which the odour filter is
installed downwards from the front section and
remove as illustrated.
2. Leave the filter under sunlight for one day. Filter
will be cleaned during this time.
3. Install the filter back to its place.
Odor filter must be cleaned once in a year.
C
5.4. Blue light
(Optional)
The product's vegetable bins comprise blue
light. The vegetables in the bin will continue
photosynthesize under the blue light's wavelength
effect and remain live and fresh.
22 / 31 EN
Refrigerator / User Manual
Using the product
5.6. Telescopic drawer
Pay attention not to squeeze any parts of your
body such as hands, feet and etc. between the
movable parts while the drawer is in use in order
to avoid any injury.
You can remove the partition in the drawer as
illustrated when you want to clean it.
You can remove the drawers only for cleaning.
It is not possible to group the drawers in their
places after loading them with food when they are
removed.
5.7. Ionizer
(Optional)
The ionizer system in the cooler compartment’s
air duct serves to ionize the air. The negative
ion emissions will eliminate bacteria and other
molecules causing odour in the air.
5.8. Humidity controlled crisper
(FreSHelf)
(This feature is optional)
Humidity rates of the vegetables and fruit are
kept under control with the feature of humiditycontrolled crisper and the food is ensured to stay
fresh for longer.
We recommend you to place the leafy vegetables
such as lettuce, spinach and the vegetables
which are sensitive to humidity loss, in a horizontal manner as much as possible inside the
crisper, not on their roots in a vertical position.
While the vegetables are being placed, specific
gravity of the vegetables should be taken into
consideration. Heavy and hard vegetables should
be put at the bottom of the crisper and the
lightweight and soft vegetables should be placed
over.
Never leave the vegetables inside the crisper in
their bags. If the vegetables are left inside their
bags, this will cause them to decompose in a
short period of time. In case contacting with
other vegetables is not preferred for hygiene
concerns, use a perforated paper and other
similar packaging materials instead of a bag.
Do not place together the pear, apricot, peach,
etc. and apple in particular which have a high
level of generation of ethylene gas in the same
crisper with the other vegetables and fruit. The
ethylene gas which is emitted by these fruit may
cause the other fruit to ripen faster and decompose in a shorter time.
Refrigerator / User Manual
23 / 31 EN
Using the product
5.9. Movable middle section
Movable middle section is intended to prevent
the cold air inside your refrigerator from escaping
outside.
Sealing is provided when the gaskets on the door
presses on the surface of the movable middle
section while the cooler compartment doors are
closed.
Another reason that your refrigerator is equipped
with a movable middle section is that it increases
the net volume of the cooler compartment.Standard
middle sections occupy some non-usable volume in
the refrigerator.
Movable middle section is closed when the left
door of the cooler compartment is closed.
It must not be opened manually. It moves under the
guidance of the plastic part on the body while the
door is closed.
5.10. Ice container
(Optional)
Ice container allows you to obtain ice from the
product easily.
Using the ice container
1. Remove the ice container from the freezer
compartment.
2. Fill the ice container with water.
3. Place the ice container in the freezer
compartment. About two hours later, the ice is
ready.
4. Remove the ice container from the freezer
compartment and bend it over the service plate.
Ice cubes will easily fall down to the service plate.
24 / 31 EN
Refrigerator / User Manual
Using the product
5.11. Ice box
Please read the warnings carefully on the ice container. The ice container is used for ice collection
poured ice machine. Do not put water in it to make
ice as it may break. The ice container is not used
for storing foods.
Warning: Do not change the location of the ice
container.
5.12. Ice maker
The ice machine is nonremovable. There must be
ice container at the bottom of the ice machine.
Refrigerator / User Manual
25 / 31 EN
Using the product
5.13. Freezing fresh food
• To preserve food quality, the food items placed
in the freezer compartment must be frozen as
quickly as possible, use the rapid freezing for
this.
• Freezing the food items when fresh will extend
the storage time in the freezer compartment.
• Pack the food items in air-tight packs and seal
tightly.
• Make sure the food items are packed before
putting in the freezer. Use freezer holders,
tinfoil and damp-proof paper, plastic bag
or similar packaging materials instead of
traditional packaging paper.
• Mark each food pack by writing the date on the
package before freezing. This will allow you to
determine the freshness of each pack every
time the freezer is opened. Keep the earlier
food items in the front to ensure they are used
first.
• Frozen food items must be used immediately
after defrosting and should not be frozen again.
• Do not froze large quantities of food at once.
Freezer
Compartment
Setting
-18°C4°CThis is the default, recommended setting.
-20,-22 or
-24°C
Rapid Freeze4°C
-18°C or colder2°C
5.14. Recommendations for
storing frozen foods
The compartment must be set to at least -18°C.
1. Place the food items in the freezer as quickly
as possible to avoid defrosting.
2. Before freezing, check the “Expiry Date” on
the package to make sure it is not expired.
3. Make sure the food’s packaging is not
damaged.
Cooler
compartment
Setting
4°C
Descriptions
These settings are recommended for ambient temperatures
exceeding 30°C.
Use this to freeze food items in a short time. The product will reset
to previous settings when the process is completed.
Use these settings if you believe the cooler compartment is not cold
enough due to ambient temperature or frequently opening the door.
The food items to be frozen must not contact
the already-frozen food inside to avoid partial
defrosting.
5.15. Deep freezer details
As per the IEC 62552 standards, the freezer must
have the capacity to freeze 4.5 kg of food items at
-18°C or lower temperatures in 24 hours for each
100 litres of freezer compartment volume.
Food items can only be preserved for extended
periods at or below temperature of -18°C .
You can keep the foods fresh for months (in deep
freezer at or below temperatures of 18°C ).
26 / 31 EN
Refrigerator / User Manual
Using the product
Boil the vegetables and filter the water to extend
the frozen storage time. Place the food in air-tight
packages after filtering and place in the freezer.
Bananas, tomatoes, lettuce, celery, boiled eggs,
potatoes and similar food items should not be
frozen. When these foods are frozen, only their
nutritional value and taste shall be affected
negatively. They shall not be spoiled so that they
would create a risk for human health.
5.16. Placing the food
Freezer
compartment
shelves
Cooler
compartment
shelves
Cooler
compartment
door shelves
Vegetable bin Fruits and vegetables
Fresh food
compartment
Various frozen foods including
meat, fish, ice cream,
vegetables etc.
Food items inside pots, capped
plate and capped cases, eggs
(in capped case)
Small and packed food or
beverages
Delicatessen (breakfast food,
meat products to be consumed
in short notice)
5.18. Interior light
Interior light uses a LED type lamp. Contact the
authorized service for any problems with this lamp.
Interior light used in this product is not intended
for home lighting and not suitable for such
purposes. Interior lights in cooler or freezer
compartments are intended to help safe and
convenient food placement into the refrigerator.
The lamp(s) used in this appliance is not suitable
for household room illumination. The intended
purpose of this lamp is to assist the user to place
foodstuffs in the refrigerator/freezer in a safe and
comfortable way.
5.17. Door open alert
(Optional)
An audible alert will be heard if the product's door
remains open for 1 minute. The audible alert will
stop when the door is closed or any button on the
display (if available) is pressed.
Refrigerator / User Manual
27 / 31 EN
6 Maintenance and cleaning
Cleaning your fridge at regular intervals will
extend the service life of the product.
B WARNING:
Unplug the product before cleaning it.
• Never use gasoline, benzene or
similar substances for cleaning
purposes.
• Never use any sharp and abrasive
tools, soap, household cleaners,
detergent and wax polish for
cleaning.
• For non-No Frost products,
water drops and frosting up to a
fingerbreadth occur on the rear wall
of the Fridge compartment. Do not
clean it; never apply oil or similar
agents on it.
• Only use slightly damp microfiber
cloths to clean the outer surface of
the product. Sponges and other types
of cleaning cloths may scratch the
surface
• Dissolve one teaspoon of bi-
carbonate in half litre of water. Soak
a cloth with the solution and wrung
it thoroughly. Wipe the interior of the
refrigerator with this cloth and the
dry thoroughly.
• Make sure that no water enters the
lamp housing and other electrical
items.
• If you will not use the refrigerator
for a long period of time, unplug it,
remove all food inside, clean it and
leave the door ajar.
• Check regularly that the door gaskets
are clean. If not, clean them.
• To remove door and body shelves,
remove all of its contents.
• Remove the door shelves by pulling
them up. After cleaning, slide them
from top to bottom to install.
• Never use cleaning agents or water
that contain chlorine to clean the
outer surfaces and chromium coated
parts of the product. Chlorine causes
corrosion on such metal surfaces.
6.1 Avoiding bad odours
• Materials that may cause odour
are not used in the production of
our refrigerators. However, due
to inappropriate food preserving
conditions and not cleaning the inner
surface of the refrigerator as required
can bring forth the problem of odour.
Pay attention to following to avoid
this problem:
• Keeping the refrigerator clean is
important. Food residuals, stains, etc.
can cause odour. Therefore, clean
the refrigerator with bi-carbonate
dissolved in water every few months.
Never use detergents or soap.
• Keep the food in closed containers.
Microorganisms spreading out from
uncovered containers can cause
unpleasant odours.
• Never keep the food that have passed
best before dates and spoiled in the
refrigerator.
6.2 Protecting the plastic surfaces
Do not put liquid oils or oil-cooked meals in your
refrigerator in unsealed containers as they damage
the plastic surfaces of the refrigerator. If oil is
spilled or smeared onto the plastic surfaces, clean
and rinse the relevant part of the surface at once
with warm water.
28 / 31 EN
Refrigerator / User Manual
7. Troubleshooting
Check this list before contacting the service.
Doing so will save you time and money. This list
includes frequent complaints that are not related to
faulty workmanship or materials. Certain features
mentioned herein may not apply to your product.
The refrigerator is not working.
• The power plug is not fully settled.
>>> Plug it in to settle completely
into the socket.
• The fuse connected to the socket
powering the product or the main
fuse is blown. >>> Check the fuses.
Condensation on the side wall of the cooler
compartment (MULTI ZONE, COOL, CONTROL
and FLEXI ZONE).
• The door is opened too frequently
>>> Take care not to open the
product’s door too frequently.
• The environment is too humid. >>>
Do not install the product in humid
environments.
• Foods containing liquids are kept
in unsealed holders. >>> Keep the
foods containing liquids in sealed
holders.
• The product’s door is left open. >>>
Do not keep the product’s door open
for long periods.
• The thermostat is set to too low
temperature. >>> Set the thermostat
to appropriate temperature.
Compressor is not working.
• In case of sudden power failure
or pulling the power plug off and
putting back on, the gas pressure
in the product’s cooling system is
not balanced, which triggers the
compressor thermic safeguard.
The product will restart after
approximately 6 minutes. If the
product does not restart after this
period, contact the service.
• Defrosting is active. >>> This
is normal for a fully-automatic
Refrigerator / User Manual
29 / 31 EN
defrosting product. The defrosting is
carried out periodically.
• The product is not plugged in. >>>
Make sure the power cord is plugged
in.
• The temperature setting is incorrect.
>>> Select the appropriate
temperature setting.
• The power is out. >>> The product will
continue to operate normally once the
power is restored.
The refrigerator’s operating noise is
increasing while in use.
• The product’s operating performance
may vary depending on the ambient
temperature variations. This is normal
and not a malfunction.
The refrigerator runs too often or for too long.
• The new product may be larger than
the previous one. Larger products will
run for longer periods.
• The room temperature may be high.
>>> The product will normally run
for long periods in higher room
temperature.
• The product may have been recently
plugged in or a new food item is placed
inside. >>> The product will take
longer to reach the set temperature
when recently plugged in or a new
food item is placed inside. This is
normal.
• Large quantities of hot food may have
been recently placed into the product.
>>> Do not place hot food into the
product.
• The doors were opened frequently or
kept open for long periods. >>> The
warm air moving inside will cause the
product to run longer. Do not open the
doors too frequently.
• The freezer or cooler door may be ajar.
>>> Check that the doors are fully
closed.
Loading...
+ 335 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.