Page 1
Quick Guide
Operating the product
Read “Safety Instructions” section first!
1 2 3
109
1 On/Off Key
2. Rinse Aid Indicator
3. Programme Indicators / Water Overflow Warning (P1 Flashes)
4.
Extra Drying Function
5.
Half Load function
6. Delayed Start Key
7. Time Delay Countdown Indicator
8. Start / Pause / Cancel Key
9. Salt Indicator
10. Water Cut-off Indicator
4 5 6 7 8
Page 2
12345
Intensive Eco *** Clean&Shine Quick&Shine Mini
70 ºC 50 ºC 65 ºC 60 ºC 35 ºC
Suitable for heavily
soiled dishes, pots
and pans.
Suitable for washing
dishes with normal
amount of soil. It is
the most efficient
program in terms of
combined power and
water consumption.
This is used for
assessing the
compliance with EU's
eco-design directive.
Daily washing
programme for
normally soiled
dishes.
Daily washing
programme for
normally soiled
dishes in the fastest
way.
Suitable for lightly
soiled daily dishes
that are scraped or
pre-cleaned.
High Medium Medium Medium Low
+++ - -
+++++
++++ -
115 210 120 58 30
14.8 11.9 15 10.6 10.4
1.28 0,73* / 0,755** 1.18 1.12 0.77
Loading Capacity: 10
Degree of Soiling
Energy (kWh)
Prewash
Wash
Dry
Duration (min)
Water (I)
Programme Data and Average Consumption Values Table
* : EN 60436:2016 ** : EN 60436:2020 The consumption values shown in the table were determined under standard conditions. Differences may therefore occur under practical conditions.
*** Reference programme for testing institutes. The tests in accordance with EN 50242/60436 must be carried out with a full water softener salt dispenser and a full rinse aid reservoir, and
using the test programme. The values given for programmes other than Eco 50°C program me are indicative only.
Programme number
Programme name
Cleaning temperature
Programme Table
Page 3
Quick Guide
Adjusting the water softening system
Washing, rinsing and drying performance of your dishwasher will improve when the water
softening system is adjusted correctly.
To adjust the system, first learn the water hardness in your region and adjust as indicated
below.
• Unpack the test strip.
• Open the tap and let the water flow for approx. 1
minute.
• Dip in the test strip into the water for 1 second.
• Take out the strip from the water and shake it.
• Wait for 1 minute.
• Make the necessary adjustment according to the test
strip.
After detecting the water hardness:
1. After turning on your machine, press and hold the Delayed Start and Start/Pause/
Cancel keys respectively.
2. Using the Delayed Start key, turn on LEDs 9 and 3.
3. Use the function keys to adjust the water hardness level.
4. Press On / Off key to save the setting.
Water hardness level adjustment table
Level 0
Level 1
Level 2
Level 3
Level 4
Level 5
Hardness
Level
Level 0
Level 1
Level 2
Level 3
Level 4
Level 5
English Water
Hardness °dE
10-15 8-12 14-22 On the 2nd level, the 2nd programme LED turns on.
16-19 13-15 23-27 On the 3rd level, the 3rd programme LED turns on.
20-24 16-19 28-34 On the 4th level, the 4th programme LED turns on.
25-62 20-50 35-90
German Water
Hardness °dH
0-5 0-4 0-8
6-9 5-7 9-13
French* Water
Hardness °dF
Water Hardness Level Indicator
On the 1st level, the 1st programme LED turns on.
On the 5th level, the 1st, 2nd, 3rd and 4th programme LEDs
turn on.
Page 4
• If the hardness level of the water that you use is above 50°dH or if you are using well
water, than it is recommended to use filter and water purification devices.
• If the hardness level of the water that you use is below 7°dH, there is no need to use
salt in your dishwasher. In this case, the Salt Indicator light on the control panel of your
dishwasher will light continuously.
• If the water hardness is set to level 1, the Salt Indicator will light continuously although
it is not necessary to use salt. If you use salt under this condition, salt will not be
consumed and the lamp will not illuminate.
When moving, you will need to set the water hardness level of your dishwasher again
according to the information above, depending on the water hardness of the place you
have moved to. If the water hardness level of your machine is adjusted previously, your
machine will display the most recent hardness level adjustment.
17 4177 0100-AA_BEKO_45E10_EN/ 27-08-20.(12:49)
Loading...