Dishwasher |
User’s Manual |
DEN59420DX |
EN |
Document Number : 15 9267 0100_AA_BEKO_E8P_EN/ 06-08-18.(17:14) |
Dishwasher
User’s Manual
DEN59420DX
EN
Document Number : 15 9267 0100_AA_BEKO_E8P_EN/ 06-08-18.(17:14)
Please read these instructions first before using your appliance
Thank you for choosing a Beko appliance.
Please take some time to read this user manual before using your appliance, to ensure you know how to safely operate the controls and functions.
Carefully follow all unpacking and installation instructions to ensure the appliance is correctly connected and fitted prior to use.
Please write your product model and serial number on the last page of this user manual, and store in a safe location close to the appliance for easy future reference.
This user manual may also be applicable for several other models. Differences between models will be listed.
If you have any questions or concerns, please call our contact centre or find help and information online at www.beko.co.uk
Explanation of symbols
Throughout this User Manual the following symbols are used:
CImportant information or useful hints about usage.
AWarning for hazardous situations with regard to life and property.
BWarning for electric shock.
Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations.
Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.
This product was manufactured using the latest technology in environmentally friendly conditions.
Please read these instructions first before using your appliance
Thank you for choosing a Beko appliance.
Please take some time to read this user manual before using your appliance, to ensure you know how to safely operate the controls and functions.
Carefully follow all unpacking and installation instructions to ensure the appliance is correctly connected and fitted prior to use.
Please write your product model and serial number on the last page of this user manual, and store in a safe location close to the appliance for easy future reference.
This user manual may also be applicable for several other models. Differences between models will be listed.
If you have any questions or concerns, please call our contact centre or find help and information online at www.beko.co.uk
Explanation of symbols
Throughout this User Manual the following symbols are used:
CImportant information or useful hints about usage.
AWarning for hazardous situations with regard to life and property.
BWarning for electric shock.
Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations.
Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.
CONTENTS |
|
1 INSTRUCTIONS FOR SAFETY |
|
AND ENVIRONMENT |
4 |
General safety........................................ |
4 |
Intended use.......................................... |
4 |
Children’s safety..................................... |
5 |
Disposing of packaging material......... |
5 |
Transportation of the product............. |
5 |
Compliance with WEEE Directive and |
|
Disposing of the Waste Product.......... |
6 |
Compliance with RoHS Directive......... |
6 |
Package information............................. |
6 |
2 DISHWASHER |
7 |
Overview................................................. |
7 |
Fan drying system................................. |
8 |
Technical specifications....................... |
8 |
3 INSTALLATION |
9 |
Appropriate installation location........ |
9 |
Connecting water supply..................... |
9 |
Connection to the drain..................... |
10 |
Adjusting the feet.............................. |
10 |
Electrical connection......................... |
10 |
This appliance must be earthed........ |
11 |
Fitting a different plug........................ |
11 |
Initial use............................................... |
11 |
4 PREPARATION |
12 |
Tips for energy saving........................ |
12 |
Water softening system..................... |
12 |
Adjusting the water softening |
|
system................................................... |
12 |
Adding salt............................................ |
14 |
Detergent.............................................. |
15 |
Adding Liquid/Gel Detergent and |
|
Rinse Aid ............................................... |
16 |
Powder Detergents............................. |
17 |
Tablet detergents............................... |
18 |
Collapsible upper basket wires.......... |
21 |
Tray Wash Supports............................. |
21 |
Upper basket multipurpose service |
|
rack........................................................ |
22 |
Upper basket height adjustable |
|
rack........................................................ |
22 |
Cutlery basket .................................... |
23 |
Collapsible lower basket tines.......... |
23 |
Adjusting the height of the upper |
|
basket................................................... |
24 |
5 OPERATING THE PRODUCT25 |
|
Programme Selection / Programme |
|
Cancel key............................................ |
26 |
Function Keys...................................... |
26 |
Preparing the machine...................... |
26 |
Programme selection......................... |
26 |
Auxiliary functions............................. |
29 |
Scheduling the washing time............ |
31 |
Starting the programme.................... |
32 |
Cancelling the programme................ |
32 |
Adjusting the amount of rinse aid... |
33 |
Salt indicator ( )............................... |
33 |
Rinse Aid indicator ( )...................... |
33 |
End of programme.............................. |
33 |
Water cut-off warning....................... |
33 |
Overflowing warning......................... |
34 |
6 HOMEWHIZ FUNCTION |
35 |
HomeWhiz Setup and User Account |
|
Settings................................................ |
35 |
7 MAINTENANCE AND |
|
CLEANING |
39 |
Cleaning the outer surface of the |
|
product................................................. |
39 |
Cleaning the interior of the machine39 |
|
Cleaning the filters............................. |
39 |
Cleaning the hose filter..................... |
40 |
Cleaning the impellers....................... |
41 |
Lower impeller.................................... |
41 |
Upper impeller .................................... |
41 |
8 TROUBLESHOOTING |
42 |
9 GUARANTEE |
47 |
1 Instructions for safety and envIronment
This section contains safety instructions that will help to give protection from risk of personal injury or property damage. Failure to follow these instructions shall void all warranties.
General safety
•• Never place the product on a carpet-covered floor; otherwise, lack of airflow beneath the product will cause electrical parts to overheat. This will cause
problems with your product.
•• Do not operate the product if the power cable / plug is damaged! Call the Authorised Service Agent.
•• Connect the product to a grounded outlet protected by a fuse complying with the values in the “Technical specifications” table. Do not neglect to have the grounding installation made by a qualified electrician. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.
•• The water supply and draining hoses must be securely fastened and remain undamaged.
•• Unplug the product when not in use.
•• Never wash the product by spreading or pouring water onto it! There is the risk of electric shock!
•• Never touch the plug with wet hands! Never unplug by pulling on the cable, always pull out by grabbing the plug.
•• The product must be unplugged during installation, maintenance, cleaning and repairing procedures.
•• Always have the repair procedures carried out by the Authorised Service Agent. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorised persons.
•• Never use chemical solvents in the product. They bring forth the risk of explosion.
•• When you pull the upper and lower baskets out completely, the door of the product will bear all the weight of the baskets. Do not put other loads on the door; otherwise, the product may tilt.
•• Never leave the door of the product open apart from loading and unloading procedures.
•• Do not to open the door of the product when it is running unless necessary. Be careful for the rush of hot steam when you need to open the door.
Intended use
•• This product has been designed for domestic use.
•• It must be used to do the domestic type dishes only.
4 /53 EN |
Dishwasher / User’s Manual |
Instructions for safety and envIronment
•• This appliance is intended to be used in household and similar applications such as:
- Staff kitchen areas in shops, offices and other working environments.
•• Only dishwasher safe detergents, rinse aids and additives must be used.
•• The manufacturer waives any responsibility arisen from incorrect usage or transportation.
•• This appliance can be used by children aged from 8 years and above and persons with reduced physical,sensory
or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
Children’s safety
•• Electrical products are dangerous for the children. Keep children away from the product when it is in use. Do not let them to tamper with the product.
•• Do not forget to close the door of the product when leaving the room where it is located.
•• Store all detergents and additives in a safe place away from the reach of the children.
Disposing of packaging material
Packaging materials are dangerous to children. Keep packaging materials in a safe place away from reach of the children.
Packaging materials of the product are manufactured from recyclable materials. Dispose of them properly and sort in accordance with recycled waste instructions. Do not dispose
of them with normal domestic waste.
Transportation of the product
AIf you need to move the product, do it in upright position and hold from the rear side. Tilting the product onto its front side may cause the electronic parts in it get wet and damaged.
1.Unplug the product before transporting it.
2.Remove water drainage and water supply connections.
3.Drain the remaining water in the product completely.
Dishwasher / User’s Manual |
5/53 EN |
Instructions for safety and envIronment
Compliance with WEEE Directive and Disposing of the Waste Product
This product complies with
EU WEEE Directive (2012/19/EU). This product bears a classification symbol
for waste electrical and electronic equipment (WEEE).This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Do not dispose of the waste product with normal domestic and other wastes at the end of its service life. Take it to the collection center for the recycling of electrical and electronic equipment. Please consult your local authorities to learn about these collection centers.
Compliance with RoHS Directive
The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.
Package information
Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.
6 /53 EN |
Dishwasher / User’s Manual |
2Dishwasher
Overview
1.Upper basket
2.Cutlery basket
3.Lower basket
4.Automatic Liquid/Gel Detergent and Rinse Aid Dosing System
5.Type Label
6.Control panel
7.Door
11. Lower impeller
9.Salt reservoir lid
10.Filters
11.Upper impeller
12.Upper basket rail
13.Upper cutlery basket ( depends on model )
14.Upper table ( depends on model )
15.Ceiling impeller ( depends on model )
16.Fan drying system ( depends on model )
16 |
Dishwasher / User’s Manual |
7/53 EN |
Dishwasher
Technical specifications
Compliance to standards and test data / EC declaration of conformity
This product complies with the following EU directives;
Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations.
2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242
Power input |
220-240 V, 50 Hz (see rating label) |
|
Total power consumption |
1800-2100 W (see rating label) |
|
Heater power consumption |
1800 W (see rating label) |
|
Total current (depends on the model) |
10 A (see rating label) |
|
Drain pump power consumption |
30 W (see rating label) |
|
Water pressure |
0.3 –10 bar (= 3 – 100 N/cm² = 0.01-1.0 |
|
|
|
Mpa) |
|
|
|
C |
Technical specifications may be changed without prior notice to improve the |
|
quality of the product. |
|
|
|
|
|
C |
Figures in this manual are schematic and may not match the product exactly. |
|
C Values stated on the markings of the product or in the printed documents accompanying the product are obtained in the laboratory on basis of the relevant standards. Depending on operational and environmental conditions of the product, these values may vary.
Fan drying system
Fan drying system ensures efficient drying of your dishes.
It is normal to hear a different sound than that of washing cycle during fan operation.
Note for test institutions:
Data required for performance tests shall be provided upon request. Requests can be
e-mailed to the following address: dishwasher@standardloading.com
Do not forget to provide the code, stock and serial numbers of the product to be tested in your request e-mail along with your contact information. Code, stock and serial numbers of the product may be found on the type label attached to the side wall of the door.
8 /53 EN |
Dishwasher / User’s Manual |
3 Installation
To make the product ready for use, make sure that the electricity, tap water supply and water drainage systems are appropriate before calling the Authorised Service Agent. If they are not, call a qualified technician and plumber to have any necessary arrangements carried out.
C Preparation of the location and electrical, tap water and waste water installations at the place of installation is under customer's responsibility.
BManufacturer shall not be held responsible for damages arising from processes carried out by unauthorised persons.
APrior to installation, visually check if the product has any defects on it. If so, do not have it installed. Damaged products cause risks for your safety.
C Make sure that the water inlet and discharge hoses are not folded, pinched or crushed while pushing the product into its place after installation or cleaning procedures.
When placing the product, pay attention not to damage the floor, walls, piping, etc. Do not hold the product from its door or panel to move it.
Appropriate installation location
•• Place the product on a solid and flat floor that has sufficient load carrying capacity! The product must be installed on a flat surface in order for the door to be closed comfortably and securely.
•• Do not install the product at places where temperature may fall below 0ºC.
•• Place the product on a rigid floor. Do not place it on a long pile rug or similar
surfaces.
B
•• Make sure that you select a location that will allow you to load and unload the dishes in a fast and comfortable manner.
•• Install the product in a place close to the tap and the drain. Select the installation location by considering that it will not be changed after the connections are made.
Connecting water supply
•• Do not use old or used water inlet hose on the new product. Use the new water inlet hose supplied with the product.
•• Connect the water inlet hose directly to the cold water tap. Permitted water temperature up to 25°C. Pressure coming from the tap should be minimum 0.3 and maximum 10 bars. If the water pressure exceeds 10 bars, a pressure relief valve should be installed in between.
•• Open the tap completely after making the connections to check for water
leaks.
A
Dishwasher / User’s Manual |
9/53 EN |
Installation
Connection to the drain
Water discharge hose can directly be connected to the drain hole or sink’s drainage. The length of this connection must be min. 50 cm and max. 100 cm from the floor. A discharge hose longer than 4 meters will cause washing performance to be affected.Attach the water discharge hose to the drainpipe without bending it. Tightly fix the water discharge hose to the
drainpipe in order to prevent any dislocation of the water discharge hose during operation of the product.
max 1000 min 500 |
min 120 |
min 300 |
C Drainpipe must be connected to the foul water system and it should not be connected to any surface water drain.
Adjusting the feet
If the door of the product cannot be closed properly or if the product wobbles when you push it slightly, then you need to adjust the feet of the product. Adjust the feet of the product as illustrated in the relevant section.
ADiswashers door must be aligned properly otherwise hot steam can escape! Danger of serious burns, other injury or may damage furniture.
Electrical connection
Before you insert the plug into the wall socket make sure that the voltage and the frequency shown in the rating label corresponds to your electricity supply.
We recommend that this appliance be connected to the mains supply via a suitable switched and fused socket in a readily accessible position.
If the supply cord or the mains lead is damaged please do not replace it yourself. The supply cord or the mains lead must be replaced by a Authorised Service Agent or a similarly qualified person.
10 /53 EN |
Dishwasher / User’s Manual |
Installation
AThis appliance must be earthed
If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted. Destroy the old plug, which is cut off as a plug with a bared cord could cause a shock hazard if inserted into a socket elsewhere in the house.
The moulded plug on this appliance incorporates a 13A fuse. Should the fuse need to be replaced an ASTA approved BS1362 fuse of the same rating must be used. Do not forget
to refit the fuse cover. In the event of losing the fuse cover, the plug must not be used until a replacement fuse cover has been fitted. Colour of the
replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any good electrical store.
Fitting a different plug
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals on your plug, proceed as follows:
1.Connect the green - yellow or green (earth) wire to the terminal in the plug marked ‘E’ or with the symbol 
or coloured green and yellow or green.
2.Connect the blue (neutral) wire to the terminal in the plug marked ‘N’ or coloured black.
3.Connect the brown (live) wire to the terminal in the plug marked ‘L’ or coloured red.
Green and yellow or green
N |
L |
|
Blue or |
||
Brown or red |
||
black |
||
|
With the alternative plugs a 13A fuse must be fitted either in the plug or adaptor or in the main fuse box. If in doubt contact a qualified electrician.
Initial use
Before starting to use the product, make sure that all preparations are made in accordance with the instructions in sections “Important safety instructions” and “Installation”.
•• Before using the product, fill the salt reservoir with 1 litre of water, add salt (see next page) and stir to dissolve. Run the Dishwasher without dishes on a short programme with a small amount of detergent.
AThere might be a small amount of water left in the product after factory quality control tests. This causes no harm to the product.
Dishwasher / User’s Manual |
11/53 EN |
4PreparatIon
Tips for energy saving
Following information will help you use the product in an ecological and energyefficient manner.
Wipe away any coarse food remnants on the dishes before putting them in the product. Operate the product after filling it completely.
When selecting a programme, consider the table of "Programme data and average consumption values".
Do not put more detergent than suggested on the detergent package.
Water softening system
The product is equipped with a water softening system which reduces the hardness of incoming water. This system softens the supply water to a level that will allow washing the dishes with the required quality.
Dishwasher salt is used for this purpose.
Adjusting the water softening system
Cleaning, rinsing and drying performance of your dishwasher will increase when water softening system is adjusted properly. Adjust the new water hardness level according to the Water hardness level instruction in this booklet.
Use the test strip supplied with the product according to the steps given below to determine hardness level of your supply water.
12 /53 EN |
Dishwasher / User’s Manual |
PreparatIon
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Remove the test |
Turn on the tap and |
Hold the test strip in |
Remove the test |
Wait for 1 minute. |
The |
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
||||||||
test strip shows |
|
|||||||||||||
strip from the |
let the water run for |
the water for about |
strip from the water |
|
you the hardness |
|||||||||
packet. |
about a minute. |
a second. |
and shake it. |
|
level. |
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
After determining hardness level of the supply water:
1.After switching on your machine, long press the Menu key
2.Pres the settings menu key for 3 seconds to enter the Settings Menu.
3.Using <- and +> keys, proceed until the water hardness setting indicator becomes on (“r” position will be displayed).
4.Using the Selection key, adjust water hardness level according to the hardness of the supply water. For correct setting please see “Water hardness level setting table”.
5.Press the Menu key to exit the settings menu. Your setting will be saved automatically.
Water hardness level adjustment table
Hardness |
English Water |
German Water |
French Water |
Water Hardness Level Indicator |
||||||||||||||||
Level |
Hardness °dE |
Hardness °dH |
Hardness °dF |
|||||||||||||||||
|
||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Level 0 |
0-5 |
0-4 |
0-8 |
Press the Selection key to switch the water |
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
Level 1 |
6-9 |
5-7 |
9-13 |
hardness level to position 1. (r1) |
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Level 2 |
10-15 |
8-12 |
14-22 |
Press the Selection key to switch the water |
||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
hardness level to position 2. (r2) |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
Level 3 |
16-19 |
13-15 |
23-27 |
Press the Selection key to switch the water |
||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
hardness level to position 3. (r3) |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
Level 4 |
20-24 |
16-19 |
28-34 |
Press the Selection key to switch the water |
||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
hardness level to position 4. (r4) |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
Level 5 |
25-62 |
20-50 |
35-90 |
Press the Selection key to switch the water |
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
hardness level to position 5. (r5) |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
In order to protect your glassware against glass corrosion in an optimal way, you have to perform the same hardness settings, which you have made in the control panel, with the regeneration setting switch.
For example, if you have adjusted to “3rd level” in the control panel, also set the regeneration adjustment switch to 3rd level.
Regeneration Adjustment Switch |
|
|
|
|
|
0th Level |
1st Level |
2nd Level |
3rd Level |
4th Level |
5th Level |
1 |
1 |
2 |
3 |
4 |
5 |
Dishwasher / User’s Manual |
13/53 EN |
PreparatIon
If the hardness level of the supply water |
|
|
|
||||
|
|
|
|||||
is above 90 °dF or if you are using well |
|
|
|
||||
water, then it is recommended to use water |
|
|
|
||||
purification devices and special filters. |
|
|
|
||||
If the hardness level of the supply water is |
|
|
|
||||
below 13°dF, there is no need to use salt |
|
|
|
||||
in your dishwasher. If this is the case, “No |
|
|
|
||||
Salt Warning Indicator” (if any) illuminates |
|
|
|
||||
continuously on the panel of your machine. |
|
|
|
||||
If the water hardness level adjustment is set |
|
|
|
||||
to level 1, the “No salt warning indicator” will |
|
|
|
||||
|
|
|
|||||
illuminate continuously although it is not |
3. Add 1 litre of water to salt reservoir of |
||||||
necessary to use salt. If you use salt under this |
your machine only in initial use. |
||||||
condition, salt will not be consumed and the |
4. Add salt to the salt compartment. To |
||||||
Salt indicator will not illuminate. |
|||||||
speed up dissolution rate of salt in |
|||||||
C |
If you move your house, it is |
|
water, stir it with a spoon. |
||||
necessary to readjust water |
|
|
|
||||
C |
You can put about 2 kg of |
||||||
|
hardness level of your machine |
|
softening salt into the salt |
||||
|
by considering the information |
|
|||||
|
given above according to the |
|
|
reservoir. |
|||
|
|
5. Replace the lid and tighten it when the |
|||||
|
hardness level of the supply |
|
|||||
|
water in your new location. |
|
reservoir is full. |
||||
|
Your machine will display the |
|
|
|
|
||
C |
You need to add salt right before |
||||||
|
most recently adjusted water |
|
|||||
|
|
starting the machine. Thus, the |
|||||
|
hardness level. |
|
|||||
|
|
|
|
|
overflowing salty water will be |
||
|
|
|
|
|
|||
|
|
|
|
flushed immediately, preventing |
|||
C |
Adjust the water softness |
|
|||||
level according to the "Water |
|
|
|
the risk of corrosion in machine. |
|||
|
hardness level instruction" |
|
|
In cases where you would not |
|||
|
supplied with your machine. |
|
|
start washing immediately, |
|||
Adding salt |
|
|
run your machine empty in the |
||||
|
shortest program. |
||||||
|
|
|
|
|
|||
C |
Use only special softening salts |
|
|
|
|||
C |
Since different salt brands in the |
||||||
produced particularly for the |
|
market have different particle |
|||||
dishwashers in your machine. |
|
sizes and since the water |
|||||
1. First take the lower basket out to add |
|
hardness may vary, dissolution |
|||||
|
of the salt in water may take |
||||||
softening salt. |
|
||||||
|
a couple of hours. Therefore, |
||||||
2. Turn the salt reservoir lid counter- |
|
||||||
|
Salt Indicator remains on for a |
||||||
clockwise to open it (A). |
|
while after adding salt into the |
|||||
|
|
|
|
|
machine. |
||
14 /53 EN |
Dishwasher / User’s Manual |
PreparatIon
Detergent
You can use powder, tablet and liquid/gel detergent in the machine.
AOnly use the detergents produced particularly for use with dishwashers in the machine. We recommend you not to use detergents that
contain chlorine and phosphate as they are harmful for the environment.
Your dishwasher is equipped with an Automatic Liquid/Gel Detergent Dosing System.
Thanks to this system, the amount of rinse aid and liquid/gel detergent required for the selected washing programme is adjusted automatically.
C Please read the information given in section “Operating the Product” to activate or deactivate the Automatic Liquid/Gel Detergent Dosing adjustment.
C When the Automatic Liquid/ Gel Detergent function is enabled, the Automatic Liquid/ Gel Detergent indicator on the panel will light up if there is liquid/gel detergent in the
detergent box. If there is little or no detergent in the detergent box, the indicator will flash.
C When the Automatic Liquid/Gel Detergent indicator starts to flash, there is enough detergent for at least 5 washing cycles.
•• Factory settings of the Automatic Liquid/Gel Detergent Dosing System are based on the detergent
amount recommended by detergent manufacturers.
•• You can proceed to the Settings menu to change the Automatic Liquid/Gel Detergent Dosing setting according to your habits, or according to the recommendations by the detergent manufacturer if you are using a different liquid/gel detergent.
CPlease follow the instructions given in section “Operating the Product” to change the settings of the Automatic Liquid/Gel Detergent Dosing System and Rinse Aid.
CIn addition to liquid/gel detergents that function only as a detergent, there are also liquid/gel detergents that act as rinse aid and/or soften water. Follow the manufacturer’s recommendations when using these detergents.
Detergent manufacturer’s recommendations about the amount of liquid/gel detergent to be used are as
follows: |
|
For lightly soiled dishes |
20 ml |
For moderately soiled dishes |
25 ml |
For heavily soiled dishes |
30 ml |
C Some gel-type detergents may not be suitable for automatic dosing as they are highly viscous. Apply this type of detergents onto the inner surface of the dishwasher’s door or directly into the dishwasher, paying attention to the recommendations of the detergent manufacturer.
Dishwasher / User’s Manual |
15/53 EN |
Loading...