Behringer UB1002 Specification Sheet
Technical Specications
EURORACK UB1002
Ultra-Low Noise Design 10-Input 2-Bus Mic/Line Mixer
2 EURORACK UB1002 Technical Specifications
EURORACK UB1002
Ultra-Low Noise Design 10-Input 2-Bus Mic/Line Mixer
Ultra low noise design, highest possible headroom, ultra-transparent audio
2 state-of-the-ar t, studio-grade IMP “Invisible” Mic Preamps with 130 dB dynamic range for 24-bit, 192 kHz sampling rate inputs
Eective, extremely musical 3-band EQ plus sw itchable low-cut lter on all mono channels
10 balanced high-headroom line inputs wit h +4/-10 level selection on all stereo channels
One post fader FX send per channel for external FX devices
Clip LEDs on all mono channels
Main mix outputs plus sep arate control room, headphone and 2-track ou tputs
2-track input s assignable to main mix or control room/headphone outputs
FX to control r oom function helps to monitor eects signal via headphone and control room outputs
Switchable +4 8 V phantom power for condenser microphones
External power supply for noise-free audio and superior transient response
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Specications
Mono Inputs
Microphone Inputs (IMP “Invisible” Mic Preamp)
Type XLR connec tor, elec tronically
balanced, discrete input circuit
Mic E.I.N.1 (20 Hz - 20 kHz)
@ 0 source resis tance -134 dB / 135.7 dB A-weighted
@ 50 source resis tance -131 dB / 133.3 dB A-weighted
@ 150 source resistance -129 dB / 130.5 dB A-weighted
Frequency Response
<10 Hz - 150 kHz -1 dB
<10 Hz - 200 kHz -3 dB
Gain range +10 dB to +60 dB
Max. input level +12 dBu @ +10 dB GAIN
Impedance approx. 2.6 k b alanced
Signal-to-noise ratio 110 dB / 112 dB A-weighted
(0 dBu In @ +22 dB GAIN)
Line Input
Type ¼" TRS jack, electronically balanced
Impedance approx. 20 k b alanced,
approx. 10 k unbalanced
Gain range -10 dB to +40 dB
Max. input level +22 dBu @ 0 dB GAIN
Fade-Out Attenuation2 (Crosstalk Attenuation)
Main fader closed 90 dB
Channel muted 89.5 dB
Channel fader muted 89 dB
Frequency Response (Mic In Main Out)
<10 Hz - 90 kHz +0 dB / -1 dB
<10 Hz - 160 kHz +0 dB / -3 dB
Stereo Inputs
Distortion (THD + N) 0.005% / 0.004% A-weighted
Type ¼" TRS jack, electronically balanced
Impedance approx. 20 k
Max. input level +22 dBu
Loading...