Behringer Power Overdrive PO300 Owner's Manual
POWER OVERDRIVE PO300
Ultimate Powe r Overdrive Eec ts Pedal
Thank you for show ing your condence in us by purchasing the BEHRINGER POWER OVERDRIVE PO300.
This high-quality e ects pedal enables you to produce sup er thick, tube-like overdrive plus endless
sustain. Thanks to its high-per formance features you c an achieve classic hard rock or heavy metal
overdrive sounds.
1. Controls
(5)
(1)
(4)
(2) (3)
(8)
(7)
(6)
(1) The LEVEL control adjust s the output level.
(2) The PHAT control modies the frequency range to ac hieve a more robust and “fatter” sound.
(3) The POWER control adjusts the streng th of the sound. High settings provide a more
mid-accentuated sound, while low settings cut away some midrange energy.
(4) The DRIVE control adjusts the amount of overdrive eec t.
(5) The ON /BATT LED illuminates when the eect is ac tivated. It also serves as a battery level indicator.
(6) Use the foot switch to activate/deac tivate the eect.
(7) Use this ¼" TS IN connector to plug in the ins trument cable.
(8) The ¼" TS OUT connector s ends the signal to your amp.
Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V bat tery
(not included), press the hinges with a ballpoint pen and remove the pedal cover. Be caref ul not to
scratch the unit.
◊ The PO300 has no on /o switch. As soon as you inser t the plug into the in connector,
the PO300 is on. When not in use, remove the plug from the in connec tor. This ex tends
the life of the battery.
The SERIAL NUMBER is located at the underside.
POWER OVERDRIVE PO300
2. Safety Instructions
Do not use near water, or install near heat s ources. Use only authorize d attachments/accessories.
Do not service produc t yourself. Contact our qualied servicing personnel for servicing or rep airs,
especially w hen power supply cord or plug is damaged.
3. Warranty
Please regis ter your new BEHRINGER equipment right after your purchas e by visiting
http://behringer.com and read the terms and conditions of our warranty care fully.
4. Specications
In
Connec tor ¼" TS
Impedanc e 500 kΩ
Out
Connec tor ¼" TS
Impedanc e 1 kΩ
Power Supply
9 V𝌂, 100 mA regulate d
BEHRINGER PSU-SB
USA/Canad a 120 V~, 60 Hz
Europe/ U.K./ 230 V~, 50 Hz
Australia
China 220 V~, 50 Hz
Korea 220 V~, 60 Hz
Japan 100 V~, 50/60 Hz
Power conne ctor 2 mm DC jack,
negative center
Batter y 9 V type 6LR 61
Power consumption 30 mA
Physical/Weight
Dimensio ns approx. 2 ⁄ x 2 ¾ x 4 ⁄"
(H x W x D) approx. 5 4 x 70 x 123 mm
Weight approx. 0.73 lbs / 0.33 kg
BEHRING ER is constant ly strivin g to maintain the
highes t professio nal standard s. As a result of t hese eff orts,
modifi cations may be m ade from tim e to time to exis ting
produc ts withou t prior notice . Specific ations and app earance
may there fore diff er from thos e listed or show n.
TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER IS PART OF THE
MUSIC GROUP (MUSIC-GROUP.COM). ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. MUSICGROUP ACCEPTS NO LIABILITY FOR ANY LOSS
WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN.
COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS
ONLY. FULLFILLERSAND RESELLERS ARE NOT AGENTS OF MUSICGROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND MUSICGROUP BY ANY EXPRESS OR
IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM
OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS
WRITTEN PERMISSION OF MUSICGROUPIPLTD. ALL RIGHTS RESERVED. © 2012 MUSICGroupIPLtd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town,
Tortola, British Virgin Islands
Loading...