Behringer PMP980S, PMP1280S User Manual
ENGLISH
User Manual
EUROPOWER
PMP960M/PMP980S/
PMP1280S
900/1,200-Watt 6/10-Channel
Powered Mixer with Dual
Multi-FX Processor and FBQ
Feedback Detection System
Thank you
Thank you for choosing one of the PMP series powered mixers from
BEHRINGER. These mixers pack impressive features such as digital
effects, graphic EQs, FBQ feedback destroyer and unique voice
cancelling function – all in a lightweight, portable package. You
now have a versatile combination of inputs, routing options, effects
and power amp operations for your rehearsal space, small venue
or portable PA needs. But why bother with manuals? We know you
want to get started right away, but please read this manual carefully
and keep it handy for ongoing reference. These instructions show
you all the inside features, tricks, and tips you need to build the best
possible sound with your new PMP powered mixer.
After all, it’s all about your sound.
This manual is available in English, German, French,
Spanish, Italian, Russian, Polish, Dutch, Finnish, Swedish,
Danish, Portugese, Greek, Japanese and Chinese. There may
also be more current versions of this document. Download them
by going to the appropriate product page at:
Table of Contents
Thank you ..................................................................... 1
Important Safety Instructions ................................... 2
1. Before you get started ........................................... 3
2. Control Elements .................................................... 3
3. Digital Effects Processor ........................................ 6
4. Installation ............................................................... 6
5. Wiring Examples ..................................................... 9
6. Specifications ........................................................11
Legal Disclaimer ........................................................ 13
Waranty.......................................................................14
www.behringer.com
XXX-XXXXX-XXXXX
ENGLISH
EUROPOWER PMP960M/PMP980S/PMP1280S User Manual
2
*
Terminals marked with this symbol carry electrical current of
suffi cient magnitude to constitute risk of electric shock. Use
only high-quality commercially-available speaker cables with ¼" TS
plugs pre-installed. All other installation or modifi cation should be
performed only by qualifi ed personnel.
*
This symbol, wherever it appears, alerts you to the presence of
uninsulated dangerous voltage inside the enclosure - voltage that
may be suffi cient to constitute a risk of shock.
!
This symbol, wherever it appears, alerts you to important operating
and maintenance instructions in the accompanying literature.
Please read the manual.
Caution !
To reduce the risk of electric shock, do not remove the top cover
(or the rear section). No user serviceable parts inside. Refer servicing
to qualifi ed personnel.
Caution !
To reduce the risk of fi re or electric shock, do not expose this
appliance to rain and moisture. The apparatus shall not be exposed
to dripping or splashing liquids and no objects fi lled with liquids,
such as vases, shall be placed on the apparatus.
Caution !
These service instructions are for use by qualifi ed service personnel
only. To reduce the risk of electric shock do not perform any
servicing other than that contained in the operation instructions.
Repairs have to be performed by qualifi ed service personnel.
Read these instructions.
[1]�
Keep these instructions.[2]�
Heed all warnings.[3]�
Follow all instructions.[4]�
Do not use this apparatus near water.[5]�
Clean only with dry cloth.[6]�
Do not block any ventilation openings. Install in accordance [7]�
with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat
[8]�
registers, stoves, or other apparatus (including amplifi ers) that
produce heat.
Do not defeat the safety purpose of the polarized or
[9]�
grounding- type plug. A polarized plug has two blades with one
wider than the other. A grounding-type plug has two blades
and a third grounding prong. The wide blade or the third prong
are provided for your safety. If the provided plug does not fi t
into your outlet, consult an electrician for replacement of the
obsolete outlet.
Place the power cord so that it is protected from being walked
{10}�
on and sharp edges. Be sure that the power cord is protected
particularly at plugs, convenience receptacles and the point
where it exits from the apparatus.
The apparatus shall be connected to a MAINS socket outlet
{11}�
with a protective earthing connection.
Where the MAINS plug or an appliance coupler is used as
{12}�
the disconnect device, the disconnect device shall remain
readily operable.
Only use attachments/accessories specifi ed by the
{13}�
manufacturer.
Use only with the cart, stand, tripod, bracket,
{14}�
or table specifi ed by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Unplug this apparatus during lightning
{15}�
storms or when unused for long periods of time.
Refer all servicing to qualifi ed service personnel. Servicing is
{16}�
required when the apparatus has been damaged in any way,
such as power supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.
EN
Important Safety Instructions
ENGLISH
EUROPOWER PMP960M/PMP980S/PMP1280S User Manual
3
Before you get started1.
Shipment1.1
Your PMP mixer was carefully packed at the factory and the
packaging is designed to protect the unit from rough handling.
Nevertheless, we recommend that you carefully examine the
packaging and its contents for any signs of physical damage
which may have occurred during transit.
If the unit is damaged, please do NOT return it to
◊
BEHRINGER, but notify your dealer and the shipping
company immediately. Otherwise, claims for damage or
replacement may not be granted.
We recommend that you use a ight case, so as to give your
◊
power mixer optimum protection during use or transport.
Always use the original packing carton to prevent damage
◊
during storage or transport.
Make sure that children cannot play unsupervised with the
◊
device or its packaging.
Please ensure proper disposal of all packing materials.
◊
Online registration1.3
Please do remember to register your new BEHRINGER equipment right after your purchase by visiting www.behringer.com
(alternatively www.behringer.de) and kindly read the terms and
conditions of our warranty carefully.
Should your BEHRINGER product malfunction, our goal is to
have it repaired as quickly as possible. To arrange for warranty
service, please contact the retailer from whom the equipment
was purchased. Should your BEHRINGER dealer not be located
in your vicinity, you may directly contact one of our subsidiaries.
Corresponding contact information is included in the original
equipment packaging (Global Contact Information/European
Contact Information). Should your country not be listed, please
contact the distributor nearest you. A list of distributors can be
found in the support area of our website (www.behringer.com).
Registering your purchase and equipment with us helps us
process your repair claims quicker and more efciently.
Thank you for your cooperation!
The manual1.4
Initial operation1.2
Be sure that there is enough air space around the unit for
cooling and, to avoid overheating, please do not place the EUROPOWER near radiators, etc.
Blown fuses must be replaced by fuses of the same type and
◊
rating! Please refer to the “Specications” for details.
The mains connection is made using the enclosed power cord
and a standard IEC receptacle. It meets all of the international
safety certication requirements.
Please make sure that all units have proper ground con-
◊
nection. For your own safety, never remove or disable the
ground conductor from the unit or on the AC power cord.
Important notes concerning installation: The sound quality
◊
may diminish within the range of powerful broadcasting
stations and high-frequency sources. Increase the distance
between the transmitter and the device and use shielded
cables for all connections.
This manual is designed to give you both an overview of all
control elements and to provide detail about how to use them. To
provide you with a clear structure, we have grouped the control
elements according to their function. They can easily be found
on the enclosed numbered illustrations. If you need more
detailed information on specic topics, please visit our web site
www.behringer.com. The product-related information pages and
the Ultranet-based glossary explain the relevant audio engineering terminology in full detail.
ENGLISH
EUROPOWER PMP960M/PMP980S/PMP1280S User Manual
4
Front Panel
Rear Panel
ENGLISH
EUROPOWER PMP960M/PMP980S/PMP1280S User Manual
5
Control Elements2.
A detailed description of all functions of your power mixer can be
found in the following chapters. Please also refer to the enclosed
sheet with the numbered illustrations to get an overview of the
control layout.
Mono and stereo channels2.1
The HIGH control in the EQ section governs the high-
[1]
frequency range of the respective channel.
Use the MID control to boost or cut the mid-range frequen-
[2]
cies.
The LOW control allows you too boost/cut the low-frequency
[3]
range.
With the MON control you can adjust the volume of each
[4]
channel in the monitor mix.
The FX control determines the signal level sent from each
[5]
channel to the built-in effects processor; this signal is also
present at the FX OUT jack (see (32)). The PMP980S/
PMP1280S has two FX controls (FX 1 and FX 2), so that
you can use two effects simulteneously. Accordingly, it also
provides two effect Aux paths (see (32)).
Please note that the effects processor signal will be
◊
inaudible when the FX RETURN control (21) is set fully
counter-clockwise.
For the mono input channels, the PMP980S/PMP1280S has
[6]
a PAN(ORAMA) control which determines the position of
the channel signal in the stereo main mix. The PMP960M
has no PAN on the input channels, because it is a dualmono power mixer.
The BAL(ANCE) control for the stereo channels of the
[7]
PMP980S/PMP1280S corresonds to the PAN control for the
mono channels. It determines the relative volume of the
left and right input signals before they are routed to the
stereo main output. The PMP960M has no stereo channels
and hence no BAL control, because it is a dual-mono power
mixer.
The LEVEL control adjusts the channel signal level in the
[8]
main mix.
Input section2.1.1
The CLIP LED is very useful to control the input gain. It
[9]
should never be constantly illuminated (only with signal
peaks).
The PAD switch reduces the input sensitivity of the
[10]
channel by approx. 30 dB, to connect for example line-level
signals.
The balanced HI-Z input (¼" TRS) can be used for line-level
[11]
signal sources, e.g. keyboards, electric guitars and basses.
Each channel has a balanced LOW-Z microphone input
[12]
with XLR connectors, which also supply the +48 V phantom
power for condenser microphones (see (27)).
Unbalanced stereo line inputs with ¼" connectors for stereo
[13]
channels 7 to 10 of the PMP980S/PMP1280S. They can be
used for connecting keyboards with stereo outputs or stereo
drum machines.
Please remember to use either the microphone or the line
◊
input of a channel at a time, but never both at the same
time!
Effects section2.2
List of all multi-effects presets.
[14]
LED level meter of the effects processor. Since the PMP980S/
[15]
PMP1280S allows you to select two effects simultaneously, it
also has two level meters (DUAL FX). Be sure that the clip
LED illuminates for signal peaks only. If it is illuminated all
the time, it is a sign that the effects processor is overloading
and hence producing unpleasant distortion.
The Effect display (PMP980S/PMP1280S: two displays)
[16]
shows the currently selected preset.
Turn the PROGRAM control (PMP980S/PMP1280S: one
[17]
control each for FX 1 and FX 2) to select an effects preset
(preset number starts ashing). Push the control briey to
conrm your selection.
Press the FX IN button (PMP980S/PMP1280S: FX 1 IN and
[18]
FX 2 IN) to activate the effects processor.
Main and monitor section2.3
Your power mixer is equipped with two graphic 7-band
[19]
equalizers. The upper one processes the monitor signal, the
lower one the main signal. Use the EQs to adjust the sound
to the room acoustics.
Press the FBQ IN switch to activate the FBQ Feedback
[20]
Detection System. The frequencies causing feedback are
shown by the brightly lit fader LEDs. Simply lower the
level of the respective frequency range until feedback disappears and the LED goes out. Your power mixer offers this
function both for the main and the monitor mix.
Turn the FX RET control to add the effect signal to the
[21]
main mix (lower) or monitor mix (upper). The PMP980S/
PMP1280S allows you to use two effects at the same time,
it also has two FX controls each for the main and monitor
mixes: when the FX RET 1 and FX RET 2 controls are fully
counterclockwise, no effect signal is added.
The CD/TAPE IN control adjusts the volume of the 2 Track
[22]
In signal (see (35)).
The MONITOR MASTER control adjusts the monitor
[23]
output volume.
Loading...