Behringer OD300 User Manual

OVERDRIVE DISTORTION OD300

Thank you for showing your confidence in us by purchasing the BEHRINGER
OVERDRIVE DISTORTION OD300. This effects pedal is ideally suited for electric guitars.
Thanks to its high-performance features you can create state-of-the-art overdrive,
distortion or a combination of both effects.

1. CONTROLS

Top view

The LEVEL control adjusts the output level.

The TONE control allows you to shape your overall sound.

The DRIVE control adjusts the intensity of the overdrive/distortion effect.

Use the MODE control to adjust the balance between overdrive and distortion
effect. In leftmost position you got pure overdrive effect and in the rightmost
position you get pure distortion.

The ON/BATT LED illuminates when the effect is activated. It also serves as a
battery level indicator.

Use the footswitch to activate/deactivate the effect.

Use this 1/4" TS IN connector to plug in the instrument cable.

The 1/4" TS OUT connector sends the signal to your amp.

Use the DC IN connection at the front of the unit to plug in a 9 V power supply (not included).

The BATTERY COMPARTMENT is located underneath the pedal cover. To install or
replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. Be
careful not to scratch the unit.

+ The OD300 has no on/off switch. As soon as you insert the jack into the

IN connector, the OD300 begins running. When not using the OD300,
remove the jack from the IN connector. This extends the life of the
battery.

The SERIAL NUMBER is located at the bottom.

OVERDRIVE DISTORTION OD300

2. WARRANTY

For our current warranty terms, please refer to our website at http://
www.behringer.com.

3. SPECIFICATIONS

In

Connector 1/4" TS
Impedance 500 kW

Out

Connector 1/4" TS
Impedance 1 kW

Power supply 9 V , 100 mA, regulated

Power connector 2 mm DC jack, negative center
Battery 9 V type 6LR61
Power consumption 30 mA
Dimensions (H x W x D) approx. 54 mm (2 1/8") x 70 mm (2 3/4") x 123 mm (4 4/5")
Weight approx. 0.33 kg (0.73 lbs)

BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications
may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from
those listed or shown.

BEHRINGER PSU-SB
U.S./Canada 120 V~, 60 Hz
China/Korea 220 V~, 50 Hz
U.K./Australia 240 V~, 50 Hz
Europe 230 V~, 50 Hz
Japan 100 V~, 50 - 60 Hz

Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service product yourself.

4. SAFETY INSTRUCTIONS

Contact our qualified servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged.

No utilizar cerca de agua o instalar cerca de fuentes de calor. Utilice sólo accesorios y aditamentos autorizados. No intenté
reparar el producto usted mismo. Contacte a nuestro personal técnico cualificado para servicio y reparaciones, especialmente

cuando la fuente o el cable de alimentación estén dañados.

Íåэксплуатируйте приборвблизиîòисточниковâîäû èтепла.Применяйте толькоавторизованныедополнительные
устройства.Íèê îãäàíå ремонтир óéòåприборсамостоятельно. Ð емонтìîæåò произвоäèòüòî ëüê î квалифицированный
специализированныйперсонал,

Die deutsche Anleitung ist erhältlich @ www.behringer.com
Manuel francophone en téléchargement sur www.behringer.com
Manual en español disponible en www.behringer.com
Manuali italiani disponibili @ www.behringer.com

Ðóññêоязычноеðóêîâîдство@www.behringer.com

Polskainstrukcjadostêpnajestpodadresem@www.behringer.com

Nederlandse handleiding beschikbaar @ www.behringer.com
Suomenkielinen käyttöohje saatavilla osoitteesta www.behringer.com
Svensk manual finns tillgänglig på www.behringer.com
Dansk vejledning findes på @ www.behringer.com
Manual português disponível @ www.behringer.com

Еллзнйкь егчейсЯдйп хрЬсчей дйбиЭуймп уфз дйеэихнуз www.behringer.com

Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time
of printing. The names of companies, institutions or publications pictured or mentioned and their respective logos are registered
trademarks of their respective owners. Their use neither constitutes a claim of the trademarks by BEHRINGER® nor affiliation of
the trademark owners with BEHRINGER®. BEHRINGER® accepts no liability for any loss which may be suffered by any person
who relies either wholly or in part upon any description, photograph or statement contained herein. Colours and specification may
vary slightly from product. Products are sold through our authorised dealers only. Distributors and dealers are not agents of
BEHRINGER® and have absolutely no authority to bind BEHRINGER® by any express or implied undertaking or representation.
No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including
photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER Spezielle
Studiotechnik GmbH. BEHRINGER® is a registered trademark. ALL RIGHTS RESERVED. © 2006 BEHRINGER Spezielle
Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany. Tel. [phone],
Fax [phone]

особенноïðèповрежденияхсетевого проводаèëèсетевойвилки.