Behringer FBQ1502 User Manual

User Manual
ULTRAGRAPH PRO FBQ6200/FBQ3102/FBQ1502
Audiophile 31-Band and 15-Band Stereo Graphic Equalizer with FBQ Feedback Detection System
2 ULTRAGRAPH PRO FBQ6200/FBQ3102/FBQ1502 User Manual
Table of Contents
Thank you ....................................................................... 2
Important Safety Instructions ...................................... 3
Legal Disclaimer .............................................................3
Limited Warranty ........................................................... 3
1. Introduction ...............................................................5
1.1 Before you get started ...................................................... 5
1.2 The user’s manual ............................................................... 5
2. Control Elements and Connectors ...........................6
2.1 Front panel ............................................................................ 6
2.2 Rear panel ............................................................................. 6
2.3 Additional FBQ6200 control elements ...................... 7
3. Application Examples ............................................... 8
3.1 Master equalizer in sound
reinforcement systems ............................................................ 9
3.2 Equalizer in the monitor path ........................................ 9
3.3 Using the ULTRAGRAPH PRO in the studio .............10
3.4 Special sound eects ......................................................10
4. Installation ............................................................... 10
4.1 Rack mounting .................................................................. 10
4.2 Audio connections ........................................................... 10
5. Specications ........................................................... 12

Thank you

3 ULTRAGRAPH PRO FBQ6200/FBQ3102/FBQ1502 User Manual
Terminals marked with this symbol carry electrical current of su cient magnitude
to constitute risk of electric shock. Use only high-quality commercially-available speaker cables with ¼" TS plugs pre-installed. All other installation or modi cation should be per formed only by quali ed personnel.
This symbol, wherever it appears,
alerts you to the presence of uninsulated
dangerous voltage inside the enclosure - voltage that may be su cient to constitute a risk of shock.
This symbol, wherever it appears,
alerts you to important operating and
maintenance instructions in the accompanying literature. Please read the manual.
Caution
To reduce the risk of electric shock, do
not remove the top cover (or the rear section). No user serviceable parts inside. Refer servicing to quali ed personnel.
Caution
To reduce the risk of  re or electric shock,
do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects  lled with liquids, such as vases, shall be placed on the apparatus.
Caution
These service instructions are for use
by quali ed service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by quali ed service personnel.
Read these instructions.1.
Keep these instructions.2.
Heed all warnings.3.
Follow all instructions.4.
Do not use this apparatus near water.5.
Clean only with dry cloth.6.
Do not block any ventilation openings. Install in 7.
accordance with the manufacturer’s instructions.
Do not install near any heat sources such as 8.
radiators, heat registers, stoves, or other apparatus (including ampli ers) that produce heat.
Do not defeat the safety purpose of the polarized 9.
or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not  t into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or 10.
pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Use only attachments/accessories speci ed by 11.
the manufacturer.
Use only with the 12.
cart, stand, tripod, bracket, or table speci ed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
Unplug this apparatus during lightning storms or 13.
when unused for long periods of time.
Refer all servicing to quali ed service personnel. 14.
Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
The apparatus shall be connected to a MAINS socket 15.
outlet with a protective earthing connection.
Where the MAINS plug or an appliance coupler is 16.
used as the disconnect device, the disconnect device shall remain readily operable.
Technical speci cations and appearance are subject to change without notice. The information contained herein is correct at the time of printing. All trademarks are the property of their respective owners. MUSIC Group accepts no liability for any loss which may be su ered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colors and speci cations may vary slightly from product. BEHRINGER products are sold through authorized dealers only. Distributors and dealers are not agents of MUSIC Group and have absolutely no authority to bind MUSIC Group by any express or implied undertaking or representation. This manual is copyrighted. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of MUSIC Group IP Ltd.
ALL RIGHTS RESERVED. © 2011 MUSIC Group IP Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town, Tortola, British Virgin Islands
Warranty§ 1
This limited warranty is valid only if you purchased (1)
the product from a BEHRINGER authorized dealer in the country of purchase. A list of authorized dealers can be found on BEHRINGER’s website behringer. com under “Where to Buy“, or you can contact the BEHRINGER o ce closest to you.
MUSIC Group* warrants the mechanical and (2)
electronic components of this product to be free of defects in material and workmanship if used under normal operating conditions for a period of one (1) year from the original date of purchase (see the Limited Warranty terms in § 4 below), unless a longer minimum warranty period is mandated by applicable local laws. If the product shows any defects within the speci ed warranty period and that defect is not excluded under § 4, MUSIC Group shall, at its discretion, either replace or repair the product using suitable new or reconditioned product or parts. In case MUSIC Group decides to replace the entire product, this limited warranty shall apply to the replacement product for the remaining initial warranty period, i.e., one (1) year (or otherwise applicable minimum warranty period) from the date of purchase of the original product.
Upon validation of the warranty claim, the repaired (3)
or replacement product will be returned to the user freight prepaid by MUSIC Group.
Warranty claims other than those indicated above (4)
are expressly excluded.
PLEASE RETAIN YOUR SALES RECEIPT. IT IS YOUR PROOF OF PURCHASE COVERING YOUR LIMITED WARRANTY. THIS LIMITED WARRANTY IS VOID WITHOUT SUCH PROOF OF PURCHASE.
Online registration§ 2
Please do remember to register your new BEHRINGER equipment right after your purchase at behringer. com under “Support” and kindly read the terms and conditions of our limited warranty carefully. Registering your purchase and equipment with us helps us process your repair claims quicker and more e ciently. Thank you for your cooperation!
Return materials authorization§ 3
To obtain warranty service, please contact the (1)
retailer from whom the equipment was purchased. Should your BEHRINGER dealer not be located in your vicinity, you may contact the BEHRINGER distributor for your country listed under “Support” at behringer. com. If your country is not listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at behringer. com. Alternatively, please submit an online warranty claim at behringer. com BEFORE returning the product. All inquiries must be accompanied by a description of the problem and the serial number of the product. After verifying the product’s warranty eligibility with the original sales receipt, MUSIC Group will then issue a Return Materials Authorization (“RMA”) number.
Legal Disclaimer
Limited Warranty

Important Safety Instructions

Legal Disclaimer

Limited Warranty

4 ULTRAGRAPH PRO FBQ6200/FBQ3102/FBQ1502 User Manual
Subsequently, the product must be returned in (2)
its original shipping carton, together with the return authorization number to the address indicated by MUSIC Group.
Shipments without freight prepaid will not (3)
be accepted.
Warranty Exclusions§ 4
This limited warranty does not cover consumable (1)
parts including, but not limited to, fuses and batteries. Where applicable, MUSIC Group warrants the valves or meters contained in the product to be free from defects in material and workmanship for a period of ninety (90) days from date of purchase.
This limited warranty does not cover the product (2)
if it has been electronically or mechanically modi ed in any way. If the product needs to be modi ed or adapted in order to comply with applicable technical or safety standards on a national or local level, in any country which is not the country for which the product was originally developed and manufactured, this modi cation/adaptation shall not be considered a defect in materials or workmanship. This limited warranty does not cover any such modi cation/adaptation, regardless of whether it was carried out properly or not. Under the terms of this limited warranty, MUSIC Group shall not be held responsible for any cost resulting from such a modi cation/adaptation.
This limited warranty covers only the product (3)
hardware. It does not cover technical assistance for hardware or software usage and it does not cover any software products whether or not contained in the product. Any such software is provided “AS IS” unless expressly provided for in any enclosed software limited warranty.
This limited warranty is invalid if the factory-(4)
applied serial number has been altered or removed from the product.
Free inspections and maintenance/repair work (5)
are expressly excluded from this limited warranty, in particular, if caused by improper handling of the product by the user. This also applies to defects caused by normal wear and tear, in particular, of faders, crossfaders, potentiometers, keys/buttons, guitar strings, illuminants and similar parts.
Damage/defects caused by the following conditions (6)
are not covered by this limited warranty:
improper handling, neglect or failure to operate the • unit in compliance with the instructions given in BEHRINGER user or service manuals;
connection or operation of the unit in any way • that does not comply with the technical or safety regulations applicable in the country where the product is used;
damage/defects caused by acts of God/Nature • (accident,  re,  ood, etc) or any other condition that is beyond the control of MUSIC Group.
Any repair or opening of the unit carried out by (7)
unauthorized personnel (user included) will void the limited warranty.
If an inspection of the product by MUSIC Group (8)
shows that the defect in question is not covered by the limited warranty, the inspection costs are payable by the customer.
Products which do not meet the terms of this (9)
limited warranty will be repaired exclusively at the buyer’s expense. MUSIC Group or its authorized service center will inform the buyer of any such circumstance. If the buyer fails to submit a written repair order within 6 weeks after noti cation, MUSIC Group will return the unit C.O.D. with a separate invoice for freight and packing. Such costs will also be invoiced separately when the buyer has sent in a written repair order.
Authorized BEHRINGER dealers do not sell new (10)
products directly in online auctions. Purchases made through an online auction are on a “buyer beware” basis. Online auction con rmations or sales receipts are not accepted for warranty veri cation and MUSIC Group will not repair or replace any product purchased through an online auction.
Warranty transferability§ 5
This limited warranty is extended exclusively to the original buyer (customer of authorized retail dealer) and is not transferable to anyone who may subsequently purchase this product. No other person (retail dealer, etc.) shall be entitled to give any warranty promise on behalf of MUSIC Group.
Claim for damage§ 6
Subject only to the operation of mandatory applicable local laws, MUSIC Group shall have no liability to the buyer under this warranty for any consequential or indirect loss or damage of any kind. In no event shall the liability of MUSIC Group under this limited warranty exceed the invoiced value of the product.
Limitation of liability§ 7
This limited warranty is the complete and exclusive warranty between you and MUSIC Group. It supersedes all other written or oral communications related to this product. MUSIC Group provides no other warranties for this product.
Other warranty rights and § 8
national law
This limited warranty does not exclude or limit the (1)
buyer’s statutory rights as a consumer in any way.
The limited warranty regulations mentioned herein (2)
are applicable unless they constitute an infringement of applicable mandatory local laws.
This warranty does not detract from the seller’s (3)
obligations in regard to any lack of conformity of the product and any hidden defect.
Amendment§ 9
Warranty service conditions are subject to change without notice. For the latest warranty terms and conditions and additional information regarding MUSIC Group’s limited warranty, please see complete details online at behringer. com.
* MUSIC Group Macao Commercial O shore Limited of Rue de Pequim No. 202-A, Macau Finance Centre 9/J, Macau, including all MUSIC Group companies
5 ULTRAGRAPH PRO FBQ6200/FBQ3102/FBQ1502 User Manual

Introduction1.

FBQ Feedback Detection System
The FBQ Feedback Detec tion System is one of the most outstanding characteristcs of our graphic equalizers. This ingenious circuitry lets you immediately recognize and eliminate feedback frequencies. The FBQ Feedback Detec tion System uses the LEDs in the frequency band faders to indicate the critical frequencies. This way, what once used to be a labor-intensive search for feedback frequencies is now an activity that even a child could master.
In normal operation, the fader LEDs indicate frequency ranges with the highest energy levels, therefore replacing a separate audio analyzer. If you keep an eye on the LEDs while you play back your music (or during the sound check before a show), you can easily identify those frequency ranges showing the highest energy levels. Similarly, increased signal levels on individual frequency bands indicate a higher likelihood that feedback may occur.
All three models feature a dedicated subwoofer output with adjustable cut-o frequency. You can also adjust the fader range from ±6 to ±12 dB for each channel independently.
The FBQ1502 requires just one rack space, yet it oers you tons of eective methods for adjusting the sound characteristics, and is ultra-compact and extremely simple to operate.
The FBQ3102 features 31 frequency bands per channel as well as adjustable high-pass and low-pass lters. These lters further augment the adjustability options available to you.

Before you get started1.1

Shipment1.1.1
The ULTRAGRAPH PRO was carefully packed at the factory to assure secure transport. Should the condition of the cardboard box suggest that damage may have taken place, please inspect the unit immediately and look for physical indications of damage.
Damaged units should NEVER be sent directly to us. Please inform the dealer from whom you acquired the unit immediately as well as the transportation company from which you took delivery of the unit. Otherwise, all claims for replacement/repair may be rendered invalid.
Initial operation1.1.2
Please make sure the unit is provided with sucient ventilation, and never place the ULTRAGRAPH PRO on top of an amplier or in the vicinity of a heater to avoid the risk of overheating.
Before plugging the unit into a power socket, please make sure you have selected the correct voltage:
The fuse compartment near the power plug socket contains three triangular markings. Two of these triangles are opposite one another. The voltage indicated adjacent to these markings is the voltage to which your unit has been set up, and can be altered by rotating the fuse compartment by 180°.
ATTENTION: This does not apply to export models that were for example manufactured only for use with 120 V!
With its integrated limiters, noise generator and the adjustable subwoofer output with signal level display and its 62 lighted 45 mm faders, the FBQ6200 is our top model in this category.
Future-oriented BEHRINGER technology
To assure the highest possible degree of usability, all our equipment is manufactured adhering to the highest quality standards in the audio industry. Your equalizer has been manufactured under ISO9000 certied management system.
Relay-controlled hard bypass
The so-called hard bypass relays were integrated into the development concept of the FBQ6200 and the FBQ3102. These relays assure that your equalizer is automatically switched into bypass mode in the event of loss of power or faulty power delivery. These fail-safe relays also produce a slight delay during powering up in order to avoid dangerous switch-on thumps.
Balanced inputs and outputs
The BEHRINGER ULTRAGRAPH PRO models feature electronic servo-balanced inputs and outputs. The servo function performs automatically, recognizing when unbalanced signals are connected and internally converts the nominal signal level so that no signal level dierence between input and output signals occurs (6 dB correction).
The following user’s manual is intended to familiarize you with the unit’s control elements, so that you can master all the functions. After having thoroughly read the user’s manual, store it at a safe place for future reference.
If you alter the unit’s voltage, you must change the fuse accordingly. The correct value of the fuse needed can be found in the chapter “Specifications”.
Faulty fuses must be replaced with fuses of appropriate rating without exception! The correct value of the fuse needed can be found in the chapter “Specifications”.
Power is delivered via the cable provided with the unit. All requiered safety precautions have been adhered to.
Please make sure that the unit is grounded at all times. For your own protection, you should never tamper with the grounding of the cable or the unit itself.
Warranty1.1.3
Please take a few minutes and send us the completely lled out warranty card within 14 days of the date of purchase. You may also register online at behringer.com. The serial number needed for the registration is located on the rear of the unit. Failure to register your product may void future warranty claims.

The user’s manual1.2

The user’s manual is designed to give you both an overview of the control elements, as well as detailed information on how to use them. In order to help you understand the links between the controls, we have arranged them in groups according to their function. Should you need detailed information about specic topics not covered in this manual, please visit our website at behringer.com. For example, additional information about power amps and eects processors is found there.
Loading...
+ 10 hidden pages