Technical Specifications
Version 1.1 May 2000
ARCHITECTURE
The BEHRINGER ULTRA-DI DI100 is the ultimate universal helper on
stage and in the studio. The active BEHRINGER Direct Injection box
puts an end to hum and impedance problems. You can get to grips with
any imaginable source of sound e.g. electic guitar, bass or keyboards,
and route it into the mixing console clean and balanced. Pick up any
guitar amp directly at the loudspeaker output – on systems up to 3,000
Watts.
FEATURES
s Professional, multi-functional DI box for all live and studio applications
s Ultra-flat frequency response due to our renowned BEHRINGER OT-1
transformer
s Super-rugged metal housing with tough rubber corners for protection
s Internal battery automatically gets de-coupled when you use phantom
power
ENGLISH
s Ultra-low noise op amps for superior sound
s Gold-plated XLR connectors and phone jacks for input and link output
DI100
®
The information contained in this sheet is subject to change without notice. No part of this sheet may be reproduced or
transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for
any purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH.
BEHRINGER and ULTRA-DI are registered trademarks. ALL RIGHTS RESERVED.
BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany
ULTRA-DI
© 2000 BEHRINGER Spezielle Studiotechnik GmbH.
T el. +49 (0) 21 54 / 92 06-0, Fax +49 (0) 21 54 / 92 06-30
SPECIFICATIONS
Frequency Response 10 Hz to 93 kHz
Noise Level -110 dBu
THD+N @ 1 kHz / 0 dBu < 0,005 %
Input Impedance >250 kOhm
Load Impedance >600 Ohm
Inputs 1/4" jack unbal. In/ Link Out
XLR unbalanced In
Output XLR balanced Out
Maximum Input level +10/+30/+50 dBu
Power supply
Phantom power 18 V DC to 48 V DC
Battery 9 V blockcell 6LR91
Dimensions 5.91" (150 mm) x 5.12" (130 mm)
x 2.36" (60 mm)
Weight approx. 650 g
BEHRINGER is constantly striving to maintain the highest professional
standards. As a result of these efforts, modifications may be made from
time to time to existing products without prior notice. Specifications and
appearance may differ from those listed or illustrated.
www.behringer.com