Baumer GXM7W User Manual

Manual

Absolute Encoder with RS485 – SLIN interface

Baumer IVO GmbH & Co. KG

Dauchinger Strasse 58-62
DE-78056 Villingen-Schwenningen
Phone [phone]
Fax [phone].11 · 174.02.054/3
[e-mail] Subject to modification in technic and design.
www.baumer.com Errors and omissions excepted.

Contents
Page

1. Introduction 3

1.1. Scope of delivery 3

1.2. Product assignment 3

2. Safety and operating instructions 4

3. SLIN protocol 5

3.1. Technical data 5

3.2. Data transmission 5

3.3. Check sum 7

Manual_RS485_SLIN_BIDE_EN.doc 2/7 Baumer IVO GmbH & Co. KG

04.05.11 Villingen-Schwenningen, Germany

Disclaimer of liability

The present manual was compiled with utmost care, errors and omissions reserved. For this reason
Baumer IVO GmbH & Co. KG rejects any liability for the information compiled in the present manual.
Baumer IVO nor the author will accept any liability for direct or indirect damages resulting from the use of the
present information.

At any time we should be pleased receiving your comments and proposals for further improvement of the
present document.

1. Introduction

1.1. Scope of delivery

Please check the delivery upon completeness prior to commissioning.
Depending on encoder configuration and part number delivery is including:

• Encoder

• Manual available as download in the Internet

1.2. Product assignment

Shaft encoder

Product Product family

GXM7W SLIN Shaft encoder, Multiturn

Manual_RS485_SLIN_BIDE_EN.doc 3/7 Baumer IVO GmbH & Co. KG

04.05.11 Villingen-Schwenningen, Germany