bauknecht TRKK 6860 INSTRUCTION FOR USE

GB TRKK 6860

QUICK REFERENCE GUIDE

Please also carefully read the “Instructions for Use”.

Very

Wet

Load

Drying options

Buzzer & Anti-Crease

Wet

Load

cannot be selected together

Load

Fabric

Gentle

Drying

Buzzer

Anticrease

Start delay

Indicative

programmes

Plus

& Drying

Buzzer

Start Delay

Gentle

Dryness

Anti-Crease

drying

Kg

times (in

levels

Reduces drying

Adjustment

Signals/

Prevents

Delays the

intensity

(Adjusts Dryness

Sounds end of

laundry from

drying cycle

minutes)

(recommended

Level according

drying cycle

creasing

start

for delicate

to wishes)

at Intervals

items)

95’

80’

3.0

Extra dry

Cotton

135’

110’

5.0

max 5 kg

60’

50’

3.0

Cotton

80’

60’

3.0

Cupboard dry *

110’

90’

5.0

90’

70’

5.0

Iron dry *

Synthetics

25’

20’

1.0

Cupboard dry *

-

45’

35’

2.5

Synthetics

20’

15’

1.0

-

max 2.5 kg

Iron dry

35’

25’

2.5

Delicate

Delicate

Especially for delicate items

-

-

-

30’

20’

1.5

Delicate

Delicate

max 1.5 kg

(e.g. shirts).

Airing

-

-

-

Airing

Laundry is aired and

-

-

refreshed for 30 minutes

Airing

Airing

Airing

without heating.

Time

-

-

-

Completes drying or

-

-

(suitable for all fabrics).

dries single items

			Start				Starts the drying cycle. The Start/
			Pause
							Pause indicator lamp is blinking
							during the selection phase.
							Press to confirm the final selection.
	Programme						Turn the programme selector knob to
		selection					the desired programme. The indicator
							next to the programme name lights up.
							The start indicator blinks to show, that
							the dryer is in selection mode. After
							the Start / Pause button is pressed the
							start indicator lamp lights up and the
							programme starts.
							Delays the drying cycle start from
							1 up to 12 hours.
							To select the start delay turn the
							programme selector knob to the desired
							programme, select the desired options
							and press the start delay button. With
							each touch of the start delay button,
							drying cycle start is delayed by one hour.
							Press the Start/Pause button to confirm
							your final selection. Start delay indicator
							blinks and the count-down is running by
							reducing the time in one hour steps. The
							count-down is indicated by the blinking
	Start delay						of the start-delay indicator located
							above the button. During count-down
							the drum will turn from time to time to
							redistribute the laundry and the pump
							may be heard working for a short time.
							To cancel or to change the previously
							set time turn programme selector knob
							to “0” or open the door.
Remaining time							After cycle start a default drying time is
	indication						indicated depending on the selected
		Remaining time					drying programme and the dryness
							adjustment. After 15 seconds the time
		h.		min.
							will be adjusted to the real expected
							remaining time, depending on size,
							type and humidity of the load.
							Dryness adjustment is an option to adjust
		Dryness					the dryness of the laundry according to
							your wishes. Select the desired
	Adjustment						programme and the option dryness level
							adjustment by pressing the button “+“
			Drying level				for more dry or the button “–“ for more
			+1				humid. The selected dryness will be
							stored as a pre-setting to the selected
	Normal						drying programme. Using the drying
			-1				programme next time the pre-setting
							appears. By pressing the dryness
							adjustment buttons “+” or “–” the pre-
							setting can be changed.
			Filter				The indicator lamp lights up when the
							filter needs cleaning. Clean the filter
							at the end of every cycle.
							Lights up when water container needs
			Water				to be emptied. The drying cycle is
							automatically interrupted. Empty the
		Container					water container. Press the Start/Pause
							button to restart the dryer and to
							continue the programme.

PROGRAMME SEQUENCE INDICATION

The programme sequence is indicated by lamps, switching on when programme step starts and switching off when the programme step is passed.

* Test programmes according IEC 61121

5019 407 00241

PREPARING THE LAUNDRY

1.Check that all fastenings are closed and that pockets are empty.

2.Turn the articles inside out.

3.Place laundry loosely in the drum to make sure it doesn’t become tangled.

Sort laundry as follows:

A)By care symbols (on the collar or inside seam):

Suitable for tumble drying

Tumble drying with reduced drying intensity only. Press gentle button

Do not tumble dry

B)By amount and thickness/weight

Whenever the load to be dried exceeds dryer capacity, separate laundry according to weight (e.g. towels from thin underwear).

C)By type of fabrics

Cotton/linen: towels, cotton jersey, bed and table linen made of cotton or linen.

Synthetics/Easy Care: blouses, shirts, overalls, etc. made of polyester or polyamide, as well as cotton/synthetic mixes.

D)By drying level

•Sort into: iron dry, cupboard dry, etc. Do not tumble dry: woollens, silk, nylon stockings, delicate embroidery, fabrics with metallic decorations, bulky items such as sleeping bags, etc.

Important: only use specific indicated dryer-safe additives and rinse items that have been treated with stain remover thoroughly in plenty of water before drying. Only use specific indicated dryer-safe plastic items and never dry rubber or articles contaminated with vegetable oil in the dryer

DRUM LIGHT OPTION

(Option only available when Programme is selected).

•Push the button to turn the drum light on for 30 sec. and push again to turn the drum light off.

SELECTING A PROGRAMME & OPTIONS

Programme and Options:

•To select a programme, turn the programme selector knob to the required position. The Start/Pause indicator lamp is blinking, indicating that the cycle needs to be started.

•To select an option, press the corresponding button. The indicator light above the button lights up confirming that the selection has been made.

•Press the option button again to cancel the option.

STARTING & COMPLETING A

PROGRAMME

1.Having selected the desired programme and options, press the Start/Pause button.

If the laundry is not removed at the end of the drying cycle, an automatic anti-crease cycle will operate for maximum 60 min. The drum rotates at regular intervals, preventing the laundry from creasing.

Anti-Crease protection re-distributes laundry in the drum.

When the Anti-Crease option is selected and laundry has not been taken out, an anti-crease cycle is activated for 12 hrs.

2.On completion of the programme, set the programme selector knob to position “0”.

CHANGING A PROGRAMME

When changing the programme during the drying cycle, the dryer stops. The Start/ Pause indicator lamp is blinking.

To operate the new programme, press the Start/Pause button.

INTERRUPTING A PROGRAMME

To interrupt the dryer during operation

1.Set the programme selector knob to Airing.

2.Press the Start/Pause button.

Wait at least 5 minutes before opening the door to allow the dryer to cool down. For your safety the programme stops automatically if you open the door.

3.To restart, after door opening, close the door and press the Start/Pause button again.

DAILY MAINTENANCE & CLEANING

Clean the lint filter at the end of every drying cycle:

1.Open the door.

2.Pull the filter upwards.

3.Open the filter.

4.Remove lint using a soft brush or your fingertips.

5.Close the filter.

6.Push the filter back into place.

Empty the water container at the end of every drying cycle.

1.Pull the handle to remove the water container.

2.Empty the water container.

3.Replace the water container when empty by pushing it completely back in place.

TROUBLESHOOTING GUIDE

If a fault occurs, before contacting our After-Sales Service, make the following checks to try and remedy the problem:

Drying takes too long / laundry is not dry enough:

•Was the correct programme selected?

•Was the inserted laundry too wet (Washing machine spin speed less than 800 rpm? When the spinning speed is less than 800 rpm the water container fault may occur during the drying cycle)?

•Is the lint filter dirty (filter indicator lamp on)?

•Is the heat exchanger dirty (refer to the Instructions for use)?

•Is the ambient temperature too high?

The dryer does not operate: (after a power failure and/or interruption to the mains supply,

always press the Start/Pause button).

•Is the plug properly inserted into the mains electricity socket?

•Is there a power failure?

•Has the fuse blown?

•Is the door properly closed?

•Has the programme been selected?

•Has the start-delay option been selected?

•Has the Start/Pause button been pressed?

Lint filter or water container indicator lamp on:

•Is the lint filter clean?

•Is the water container empty?

•Is the water container correctly positioned?

•Is the heat exchanger clean?

Water droplets underneath the dryer:

•Is the heat exchanger correctly positioned?

•Has any fluff on the heat exchanger seal been wiped away?

•Has any fluff on the door seal been wiped away?

•Has the water container been positioned correctly?

All programme sequence indicators blinking:

•Service call necessary.

Replacing the drum light bulb (if supplied):

•If the inside lamp does not work, the bulb may be faulty.

•Unplug the dryer.

•Open the door and unscrew the glass cover insie the drum.

•Replace the faulty bulb with a new one and screw the glass cover back on.

•Replacement bulb: Philips 15W, 230/240V, E14.

AFTER-SALES SERVICE

If, after carrying out the above checks the malfunction persists or appears again, turn the dryer off and call our After-Sales Service (refer to guarantee).

Please specify:

•The nature of the fault.

•The dryer type and model.

•The service code (the number after the word Service on the adhesive rating plate) on the right-hand side when the door is open.

•Your full address and phone number.

5019 407 00241