bauknecht TRKK 6858/2 EX, TRKK 6858 EX INSTRUCTION FOR USE

GB TRKK 6858 EX

QUICK REFERENCE GUIDE

Please also carefully read the “Instructions for Use”.

Very

Wet

Load

Drying options

Buzzer & Anti-Crease

Wet

Load

cannot be selected

Load

together

Indicative

Kg

Fabric

drying

Gentle

Dryness

Buzzer

Anti-Crease

Start Delay

times (in

programmes

Reduces drying

Adjustment

Signals/

Prevents

Delays the

minutes)

& Drying

intensity

(Adjusts Dryness

Sounds end of

laundry

drying cycle

(recommended

Level according

drying cycle

from

start

levels

for delicate items)

to wishes)

at Intervals

creasing

95’

80’

3.0

Cupboard dry +

135’

110’

5.0

Cotton

Cotton

80’

60’

3.0

Cupboard dry *

110’

90’

5.0

max 5 kg

60’

50’

3.0

Iron dry *

90’

70’

5.0

Synthetics

25’

20’

1.0

Cupboard dry *

-

35’

25’

2.5

max 2.5 kg

-

45’

35’

2.5

Synthetics

20’

15’

1.0

Iron dry

Delicate

Delicate

30’

20’

1.5

Especially for delicate

-

-

-

items (e.g. shirts).

max 1.5 kg

Airing

-

-

-

Airing

Laundry is aired and

-

-

refreshed for 30 minutes

without heating.

Time

-

-

-

Completes drying or dries

-

-

single items (suitable for

all fabrics).

	Start			Starts the drying cycle. The Start/
	Pause
				Pause indicator lamp is blinking
				during the selection phase.
				Press to confirm the final selection.
	Programme			Turn the programme selector knob to the
	selection
				desired programme. The indicator next to
				the programme name lights up. The start
				indicator blinks to show, that the dryer is
				in selection mode. After the Start / Pause
				button is pressed the start indicator lamp
				lights up and the programme starts.
				Delays the drying cycle start from 1
				up to 12 hours.
				To select the start delay turn the programme
				selector knob to the desired programme,
				select the desired options and press the start
				delay button. With each touch of the start
				delay button, drying cycle start is delayed by
				one hour. Press the Start/Pause button to
				confirm your final selection. Start delay
				indicator blinks and the count-down is
	Start delay			running by reducing the time in one hour
				steps. The count-down is indicated by the
				blinking of the start-delay indicator located
				above the button. During count-down the
				drum will turn from time to time to
				redistribute the laundry and the pump may
				be heard working for a short time.
				To cancel or to change the previously set
				time turn programme selector knob to “0”
				or open the door.
	Remaining time			After cycle start a default drying time is
	indication			indicated depending on the selected
				drying programme and the dryness
				adjustment. After 15 seconds the time will
				be adjusted to the real expected
				remaining time, depending on size, type
				and humidity of the load.
				Dryness adjustment is an option to adjust
	Dryness			the dryness of the laundry according to your
				wishes. Select the desired programme and
	Adjustment
				the option dryness level adjustment by
				pressing the button “+“ for more dry or the
				button “–“ for more humid. The selected
				dryness will be stored as a pre-setting to the
				selected drying programme. Using the
				drying programme next time the pre-setting
				appears. By pressing the dryness adjustment
				buttons “+” or “–” the pre-setting can be
				changed.
	Filter			The indicator lamp lights up when the
				filter needs cleaning. Clean the filter at
				the end of every cycle.
	Water			Lights up when water container needs to
				be emptied. The drying cycle is
	Container			automatically interrupted. Empty the
				water container. Press the Start/Pause
				button to restart the dryer and to
				continue the programme.

PROGRAMME SEQUENCE INDICATION

The programme sequence is indicated by lamps, switching on when programme step starts and switching off when the programme step is passed.

* Test programmes according IEC 61121

5019 407 00263

PREPARING THE LAUNDRY

1.Check that all fastenings are closed and that pockets are empty.

2.Turn the articles inside out.

3.Place laundry loosely in the drum to make sure it doesn’t become tangled.

Sort laundry as follows:

A)By care symbols (on the collar or inside seam):

Suitable for tumble drying

Tumble drying with reduced drying intensity only. Press gentle button

Do not tumble dry

B)By amount and thickness/weight

Whenever the load to be dried exceeds dryer capacity, separate laundry according to weight (e.g. towels from thin underwear).

C)By type of fabrics

Cotton/linen: towels, cotton jersey, bed and table linen made of cotton or linen.

Synthetics/Easy Care: blouses, shirts, overalls, etc. made of polyester or polyamide, as well as cotton/synthetic mixes.

D)By drying level

•Sort into: iron dry, cupboard dry, etc. Do not tumble dry: woollens, silk, nylon stockings, delicate embroidery, fabrics with metallic decorations, bulky items such as sleeping bags, etc.

Important: only use specific indicated dryer-safe additives and rinse items that have been treated with stain remover thoroughly in plenty of water before drying. Only use specific indicated dryer-safe plastic items and never dry rubber or articles contaminated with vegetable oil in the dryer.

SELECTING A PROGRAMME & OPTIONS

Programme and Options:

•To select a programme, turn the programme selector knob to the required position. The Start/Pause indicator lamp is blinking, indicating that the cycle needs to be started.

•To select an option, press the corresponding button. The indicator light above the button lights up confirming that the selection has been made.

•Press the option button again to cancel the option.

STARTING & COMPLETING A

PROGRAMME

1.Having selected the desired programme and options, press the Start/Pause button.

If the laundry is not removed at the end of the drying cycle, an automatic anti-crease cycle will operate for maximum 60 min. The drum rotates at regular intervals, preventing the laundry from creasing.

Anti-Crease protection re-distributes laundry in the drum.

When the Anti-Crease option is selected and laundry has not been taken out, an anti-crease cycle is activated for 12 hrs.

2.On completion of the programme, set the programme selector knob to position “0”.

CHANGING A PROGRAMME

When changing the programme during the drying cycle, the dryer stops. The Start/ Pause indicator lamp is blinking.

To operate the new programme, press the Start/Pause button.

INTERRUPTING A PROGRAMME

To interrupt the dryer during operation

1.Set the programme selector knob to Airing.

2.Press the Start/Pause button.

Wait at least 5 minutes before opening the door to allow the dryer to cool down. For your safety the programme stops automatically if you open the door.

3.To restart, after door opening, close the door and press the Start/Pause button again.

DAILY MAINTENANCE & CLEANING

Clean the lint filter at the end of every drying cycle:

1.Open the door.

2.Pull the filter upwards.

3.Open the filter.

4.Remove lint using a soft brush or your fingertips.

5.Close the filter.

6.Push the filter back into place. Empty the water container at the end of every drying cycle.

1.Pull the handle to remove the water container.

2.Empty the water container.

3.Replace the water container when empty by pushing it completely back in place.

TROUBLESHOOTING GUIDE

If a fault occurs, before contacting our After-Sales Service, make the following checks to try and remedy the problem:

Drying takes too long / laundry is not dry enough:

•Was the correct programme selected?

•Was the inserted laundry too wet (Washing machine spin speed less than 800 rpm? When the spinning speed is less than 800 rpm the water container fault may occur during the drying cycle)?

•Is the lint filter dirty (filter indicator lamp on)?

•Is the heat exchanger dirty (refer to the Instructions for use)?

•Is the ambient temperature too high?

The dryer does not operate: (after a power failure and/or interruption to the mains supply,

always press the Start/Pause button).

•Is the plug properly inserted into the mains electricity socket?

•Is there a power failure?

•Has the fuse blown?

•Is the door properly closed?

•Has the programme been selected?

•Has the start-delay option been selected?

•Has the Start/Pause button been pressed?

Lint filter or water container indicator lamp on:

•Is the lint filter clean?

•Is the water container empty?

•Is the water container correctly positioned?

•Is the heat exchanger clean?

Water droplets underneath the dryer:

•Is the heat exchanger correctly positioned?

•Has any fluff on the heat exchanger seal been wiped away?

•Has any fluff on the door seal been wiped away?

•Has the water container been positioned correctly?

All programme sequence indicators blinking:

•Service call necessary.

Replacing the drum light bulb (if supplied):

•If the inside lamp does not work, the bulb may be faulty.

•Unplug the dryer.

•Open the door and unscrew the glass cover insie the drum.

•Replace the faulty bulb with a new one and screw the glass cover back on.

•Replacement bulb: Philips 15W, 230/240V, E14.

AFTER-SALES SERVICE

If, after carrying out the above checks the malfunction persists or appears again, turn the dryer off and call our After-Sales Service (refer to guarantee).

Please specify:

•The nature of the fault.

•The dryer type and model.

•The service code (the number after the word Service on the adhesive rating plate) on the right-hand side when the door is open.

•Your full address and phone number.

5019 407 00263