bauknecht TRKK 6858/2 EX, TRKK 6858 EX INSTRUCTION FOR USE
TRKK 6858 EXGB
QUICK REFERENCE GUIDE
Please also carefully read the
Instructions for Use.
Very
Wet
Load
80
110
60
90
50
70
20
35
15
25
Load
Kg
3.0
5.0
3.0
5.0
3.0
5.0
1.0
2.5
1.0
2.5
Fabric
programmes
& Drying
levels
Cotton
max 5 kg
Synthetics
max 2.5 kg
Delicate
max 1.5 kg
Airing
Wet
Load
Indicative
drying
times (in
minutes)
95
135
80
110
Cotton
60
90
25
45
20
35
Synthetics
30 20 1.5
Delicate
---
Airing
---
Time
Drying options
Cupboard dry +
Cupboard dry *
Iron dry *
Cupboard dry *
Iron dry
Especially for delicate
items (e.g. shirts).
Laundry is aired and
refreshed for 30 minutes
without heating.
Completes drying or dries
single items (suitable for
all fabrics).
Gentle
Reduces drying
intensity
(recommended
for delicate items)
-- -
--
--
Dryness
Adjustment
(Adjusts Dryness
Level according
to wishes)
-
-
Buzzer & Anti-Crease
cannot be selected
together
Buzzer
Signals/
Sounds end of
drying cycle
at Intervals
Anti-Crease
Prevents
laundry
creasing
from
Start Delay
Delays the
drying cycle
start
Start
Pause
Programme
selection
Start delay
Remaining time
indication
Dryness
Adjustment
Filter
Water
Container
PROGRAMME SEQUENCE INDICATION
The programme sequence is indicated by lamps, switching
on when programme step starts and switching off when
the programme step is passed.
Starts the drying cycle. The Start/
Pause indicator lamp is blinking
during the selection phase.
Press to confirm the final selection.
Turn the programme selector knob to the
desired programme. The indicator next to
the programme name lights up. The start
indicator blinks to show, that the dryer is
in selection mode. After the Start / Pause
button is pressed the start indicator lamp
lights up and the programme starts.
Delays the drying cycle start from 1
up to 12 hours.
To select the start delay turn the programme
selector knob to the desired programme,
select the desired options and press the start
delay button. With each touch of the start
delay button, drying cycle start is delayed by
one hour. Press the Start/Pause button to
confirm your final selection. Start delay
indicator blinks and the count-down is
running by reducing the time in one hour
steps. The count-down is indicated by the
blinking of the start-delay indicator located
above the button. During count-down the
drum will turn from time to time to
redistribute the laundry and the pump may
be heard working for a short time.
To cancel or to change the previously set
time turn programme selector knob to 0
or open the door.
After cycle start a default drying time is
indicated depending on the selected
drying programme and the dryness
adjustment. After 15 seconds the time will
be adjusted to the real expected
remaining time, depending on size, type
and humidity of the load.
Dryness adjustment is an option to adjust
the dryness of the laundry according to your
wishes. Select the desired programme and
the option dryness level adjustment by
pressing the button + for more dry or the
button for more humid. The selected
dryness will be stored as a pre-setting to the
selected drying programme. Using the
drying programme next time the pre-setting
appears. By pressing the dryness adjustment
buttons + or the pre-setting can be
changed.
The indicator lamp lights up when the
filter needs cleaning.
the end of every cycle.
Lights up when water container needs to
be emptied. The drying cycle is
automatically interrupted.
water container.
button to restart the dryer and to
continue the programme.
Clean the filter at
Empty the
Press the Start/Pause
* Test programmes according IEC 61121
5019 407 00263
PREPARING THE LAUNDRY SELECTING A PROGRAMME & OPTIONS
1. Check that all fastenings are closed and
that pockets are empty.
2. Turn the articles inside out.
3. Place laundry loosely in the drum to
make sure it doesnt become tangled.
Sort laundry as follows:
A) By care symbols (on the collar or
inside seam):
Suitable for tumble drying
Tumble drying with reduced
drying intensity only. Press
gentle button
Do not tumble dry
B) By amount and thickness/weight
Whenever the load to be dried exceeds
dryer capacity, separate laundry
according to weight (e.g. towels from
thin underwear).
C) By type of fabrics
Cotton/linen
bed and table linen made of cotton or
linen.
Synthetics/Easy Care
overalls, etc. made of polyester or
polyamide, as well as cotton/synthetic
mixes.
D) By drying level
Sort into: iron dry, cupboard dry, etc.
Do not tumble dry:
stockings, delicate embroidery, fabrics
with metallic decorations, bulky items such
as sleeping bags, etc.
Important: only use specific indicated
dryer-safe additives
that have been treated with stain remover
thoroughly in plenty of water before
drying.
Only use specific indicated
dryer-safe plastic items
rubber or articles contaminated with
vegetable oil in the dryer.
: towels, cotton jersey,
: blouses, shirts,
woollens, silk, nylon
and rinse items
and never dry
Programme and Options:
To select a programme, turn the
programme selector knob to the
required position. The Start/Pause
indicator lamp is blinking, indicating
that the cycle needs to be started.
To select an option, press the
corresponding button. The indicator light
above the button lights up confirming
that the selection has been made.
Press the option button again to cancel
the option.
STARTING & COMPLETING A
PROGRAMME
1. Having selected the desired
programme and options, press the
Start/Pause button.
If the laundry is not removed at the
end of the drying cycle, an automatic
anti-crease cycle will operate for
maximum 60 min. The drum rotates at
regular intervals, preventing the
laundry from creasing.
Anti-Crease protection re-distributes
laundry in the drum.
When the Anti-Crease option is selected
and laundry has not been taken out, an
anti-crease cycle is activated for 12 hrs.
2.
On completion of the programme, set
the programme selector knob to
position
CHANGING A PROGRAMME
When changing the programme during
the drying cycle, the dryer stops. The Start/
Pause indicator lamp is blinking.
To operate the new programme, press the
Start/Pause button.
INTERRUPTING A PROGRAMME
To interrupt the dryer during operation
1. Set the programme selector knob to
Airing.
2. Press the Start/Pause button.
Wait at least 5 minutes before opening
the door to allow the dryer to cool down.
For your safety the programme stops
automatically if you open the door.
3.
To restart, after door opening, close
the door and press the Start/Pause
button again.
0
.
DAILY MAINTENANCE & CLEANING
Clean the lint filter at the end of every
drying cycle:
1. Open the door.
2. Pull the filter upwards.
3. Open the filter.
4. Remove lint using a soft brush or your
fingertips.
5. Close the filter.
6. Push the filter back into place
Empty the water container at the end
of every drying cycle.
1. Pull the handle to remove the water
container.
2. Empty the water container.
3. Replace the water container when
empty by pushing it
in place.
TROUBLESHOOTING GUIDE
If a fault occurs, before contacting our
After-Sales Service, make the
following checks to try and remedy
the problem:
Drying takes too long / laundry is not
dry enough:
Was the correct programme selected?
Was the inserted laundry too wet
(Washing machine spin speed less than
800 rpm? When the spinning speed is
less than 800 rpm the water container
fault may occur during the drying cycle)?
Is the lint filter dirty (filter indicator
lamp on)?
Is the heat exchanger dirty (refer to the
Instructions for use)?
Is the ambient temperature too high?
The dryer does not operate:
(after a power failure and/or
interruption to the mains supply,
always press the Start/Pause button).
Is the plug properly inserted into the
mains electricity socket?
Is there a power failure?
Has the fuse blown?
Is the door properly closed?
Has the programme been selected?
Has the start-delay option been selected?
Has the
pressed?
Start/Pause
completely
button been
.
back
Lint filter or water container indicator
lamp on:
Is the lint filter clean?
Is the water container empty?
Is the water container correctly
positioned?
Is the heat exchanger clean?
Water droplets underneath the dryer:
Is the heat exchanger correctly
positioned?
Has any fluff on the heat exchanger
seal been wiped away?
Has any fluff on the door seal been
wiped away?
Has the water container been
positioned correctly?
All programme sequence indicators
blinking:
Service call necessary.
Replacing the drum light bulb (if
supplied):
If the inside lamp does not work, the bulb
may be faulty.
Unplug the dryer.
Open the door and unscrew the glass
cover insie the drum.
Replace the faulty bulb with a new one
and screw the glass cover back on.
Replacement bulb: Philips 15W,
230/240V, E14.
AFTER-SALES SERVICE
If, after carrying out the above checks the
malfunction persists or appears again, turn
the dryer off and call our After-Sales
Service (refer to guarantee).
Please specify:
The nature of the fault.
The dryer type and model.
The service code (the number after the
word Service on the adhesive rating
plate) on the right-hand side when the
door is open.
Your full address and phone number.
5019 407 00263
Loading...