bauknecht TRKK 6855 INSTRUCTION FOR USE

W

GB TRKK 6855

QUICK REFERENCE GUIDE

Please also carefully read the “Instructions for Use”.

Very

Wet

Load

Drying options

Buzzer & Anti-Crease

Wet

Load

cannot be selected

Load

together

Indicative

Kg

Gentle

Dryness

Buzzer

Anti-Crease

drying

Fabric

Start Delay

times (in

Reduces drying

Adjustment

Signals/

Prevents

Delays the

programmes

intensity

(Adjusts

Sounds end of

laundry from

drying cycle

minutes)

& Drying

(recommended

Dryness Level

drying cycle

creasing

start

for delicate

according to

at Intervals

levels

items)

wishes)

95’

80’

3.0

Ready to wear

Cotton

135’

110’

5.0

Cotton

80’

60’

3.0

Cupboard dry *

110’

90’

5.0

max 5 kg

60’

50’

3.0

Iron dry *

90’

70’

5.0

Fabrics

25’

20’

1.0

Cupboard dry *

45’

35’

2.5

Mixed Fabrics

Mixed

20’

15’

1.0

max 2.5 kg

Iron dry

35’

25’

2.5

Extra Care

Extra Care

Low drying intensity for

-

-

100’

85’

2.5

delicates and garments

max 2.5 kg

labelled

Airing

-

-

-

Airing

Laundry is aired and

-

-

refreshed for 30 minutes

without heating.

Time

-

-

-

Completes drying or dries

-

-

single items (suitable for all

fabrics).

			Start
			Pause						Starts the drying cycle. The Start/
			Start						Pause indicator lamp is blinking
				Pauze
									during the selection phase.
									Press to confirm the final selection.
	Programme								Turn the programme selector knob to
		selection							the desired programme. The indicator
									next to the programme name lights up.
									The start indicator blinks to show, that
									the dryer is in selection mode. After
									the Start / Pause button is pressed the
									start indicator lamp lights up and the
									programme starts.
									Delays the drying cycle start from
									1 up to 12 hours.
									To select the start delay turn the
									programme selector knob to the desired
									programme, select the desired options
									and press the start delay button. With
									each touch of the start delay button,
									drying cycle start is delayed by one hour.
									Press the Start/Pause button to confirm
									your final selection. Start delay indicator
									blinks and the count-down is running by
	Start delay								reducing the time in one hour steps. The
									count-down is indicated by the blinking
									of the start-delay indicator located
									above the button. During count-down
									the drum will turn from time to time to
									redistribute the laundry and the pump
									may be heard working for a short time.
									To cancel or to change the previously
									set time turn programme selector knob
									to “0” or open the door.
Remaining time									After cycle start a default drying time is
	indication								indicated depending on the selected
									drying programme and the dryness
									adjustment. After 15 seconds the time
									will be adjusted to the real expected
									remaining time, depending on size,
									type and humidity of the load.
									Dryness adjustment is an option to adjust
		Dryness							the dryness of the laundry according to
									your wishes. Select the desired
	Adjustment								programme and the option dryness level
									adjustment by pressing the button “+“
									for more dry or the button “–“ for more
									humid. The selected dryness will be
									stored as a pre-setting to the selected
									drying programme. Using the drying
									programme next time the pre-setting
									appears. By pressing the dryness
									adjustment buttons “+” or “–” the pre-
									setting can be changed.
			Filter						The indicator lamp lights up when the
									filter needs cleaning. Clean the filter
									at the end of every cycle.
			Water						Lights up when water container needs
									to be emptied. The drying cycle is
	Container								automatically interrupted. Empty the
									water container. Press the Start/Pause
									button to restart the dryer and to
									continue the programme.

PROGRAMME SEQUENCE INDICATION

The programme sequence is indicated by lamps, switching on when programme step starts and switching off when the programme step is passed.

* Test programmes according IEC 61121

5019 407 00423

PREPARING THE LAUNDRY

1.Check that all fastenings are closed and that pockets are empty.

2.Turn the articles inside out.

3.Place laundry loosely in the drum to make sure it doesn’t become tangled.

Sort laundry as follows:

A)By care symbols (on the collar or inside seam):

Suitable for tumble drying

Tumble drying with reduced drying intensity only. Press gentle button or select specific programme

Do not tumble dry

B)By amount and thickness/weight

Whenever the load to be dried exceeds dryer capacity, separate laundry according to weight (e.g. towels from thin underwear).

C)By type of fabrics

Cotton/linen: towels, cotton jersey, bed and table linen made of cotton or linen.

Synthetics/Easy Care: blouses, shirts, overalls, etc. made of polyester or polyamide, as well as cotton/synthetic mixes.

D)By drying level

•Sort into: iron dry, cupboard dry, etc. Do not tumble dry: woollens, silk, nylon stockings, delicate embroidery, fabrics with metallic decorations, bulky items such as sleeping bags, etc.

Important: only use specific indicated dryer-safe additives and rinse items that have been treated with stain remover thoroughly in plenty of water before drying.

Only use specific indicated dryer-safe plastic items and never dry rubber or articles contaminated with vegetable oil in the dryer.

SELECTING A PROGRAMME & OPTIONS

Programme and Options:

•To select a programme, turn the programme selector knob to the required position. The Start/Pause indicator lamp is blinking, indicating that the cycle needs to be started.

•To select an option, press the corresponding button. The indicator light above the button lights up confirming that the selection has been made.

•Press the option button again to cancel the option.

STARTING & COMPLETING A

PROGRAMME

1.Having selected the desired programme and options, press the Start/Pause button. If the laundry is not removed at the end of the drying cycle, an automatic anticrease cycle will operate for maximum 60 min. The drum rotates at regular intervals, preventing the laundry from creasing.

Anti-Crease protection re-distributes laundry in the drum.

When the Anti-Crease option is selected and laundry has not been taken out, an anti-crease cycle is activated for 12 hrs.

2.On completion of the programme, set the programme selector knob to position

“0”.

CHANGING A PROGRAMME

When changing the programme during the drying cycle, the dryer stops. The Start/Pause indicator lamp is blinking.

To operate the new programme, press the Start/Pause button.

INTERRUPTING A PROGRAMME

To interrupt the dryer during operation

1.Set the programme selector knob to Airing.

2.Press the Start/Pause button.

Wait at least 5 minutes before opening the door to allow the dryer to cool down. For your safety the programme stops automatically if you open the door.

3.To restart, after door opening, close the door and press the Start/Pause button again.

DAILY MAINTENANCE & CLEANING

Clean the lint filter at the end of every drying cycle:

1.Open the door.

2.Pull the filter upwards.

3.Open the filter.

4.Remove lint using a soft brush or your fingertips.

5.Close the filter.

6.Push the filter back into place.

Empty the water container at the end of every drying cycle.

1.Pull the handle to remove the water container.

2.Empty the water container.

3.Replace the water container when empty by pushing it completely back in place.

DRAINAGE SYSTEM

The 6 kg cotton programmes are made for matching a 6 kg washed load of cotton spun at more than 1000 rpm. With a 6 kg load spun at lower speed than 1000 rpm, we recommend to connect your dryer to an external drainage hose for direct water drainage to avoid water container emptying.

TROUBLESHOOTING GUIDE

If a fault occurs, before contacting our After-Sales Service, make the following checks to try and remedy the problem: Drying takes too long / laundry is not dry enough:

•Was the correct programme selected?

•Was the inserted laundry too wet?

•Is the lint filter dirty (filter indicator lamp on)?

•Is the heat exchanger dirty (refer to the Instructions for use)?

•Are the END and Anti-crease indicator lamps lighting up? The drying cycle is complete and the laundry can be taken out.

•Is the ambient temperature too high?

The dryer does not operate: (after a power failure and/or

interruption to the mains supply, always press the Start/Pause button).

•Is the plug properly inserted into the mains electricity socket?

•Is there a power failure?

•Has the fuse blown?

•Is the door properly closed?

•Has the programme been selected?

•Has the start-delay option been selected?

•Has the Start/Pause button been pressed?

Lint filter or water container indicator lamp on:

•Is the lint filter clean?

•Is the water container empty?

•Is the water container correctly positioned?

•Is the heat exchanger clean?

Water droplets underneath the dryer:

•Is the heat exchanger correctly positioned?

•Has any fluff on the heat exchanger seal been wiped away?

•Has any fluff on the door seal been wiped away?

•Has the water container been positioned correctly?

All programme sequence indicators blinking:

•Service call necessary.

Replacing the drum light bulb (if supplied):

•If the inside lamp does not work, the bulb may be faulty.

•Unplug the dryer.

•Open the door and unscrew the glass cover insie the drum.

•Replace the faulty bulb with a new one and screw the glass cover back on.

•Replacement bulb: Philips 15W, 230/240V, E14.

AFTER-SALES SERVICE

If, after carrying out the above checks the malfunction persists or appears again, turn the dryer off and call our After-Sales Service (refer to guarantee).

Please specify:

•The nature of the fault.

•The dryer type and model.

•The service code (the number after the word Service on the adhesive rating plate) on the right-hand side when the door is open.

•Your full address and phone number.

5019 407 00423