bauknecht TRKK 6731 INSTRUCTION FOR USE

GB TRKK 6731

QUICK REFERENCE GUIDE

Please also carefully read the “Instructions for Use”.

Very

Wet

Load

Drying options

Buzzer & Anti-Crease

Wet

Load

cannot be selected together

Load

Indicative

Dryness

Anti-

Crease

Fabric

Gentle

Buzzer

drying

Kg

Reduces drying

Adjustment

Signals/Sounds

Prevents

times (in

programmes

intensity

(Adjusts

end of drying

laundry from

minutes)

& Drying

(recommended

Dryness Level

cycle at Intervals

creasing

for delicate

according to

levels

items)

wishes)

95’

80’

3.0

Cupboard dry +

Cotton

135’

110’

5.0

Cotton

80’

60’

3.0

Cupboard dry *

110’

90’

5.0

max 5 kg

60’

50’

3.0

Iron dry *

90’

70’

5.0

Synthetics

25’

20’

1.0

Cupboard dry *

-

45’

35’

2.5

Synthetics

20’

15’

1.0

Iron dry

-

max 2.5 kg

35’

25’

2.5

Delicate

Delicate

-

-

30’

20’

1.5

max 1.5 kg

Especially for delicate items (e.g.

shirts).

Airing

-

-

-

Airing

Laundry is aired and refreshed

-

-

for 30 minutes without heating.

Time

-

-

-

Completes drying or dries single

-

-

items (suitable for all fabrics).

										Starts the drying cycle. The
										Start/Pause indicator lamp is
										blinking during the selection
										phase.
										Press to confirm the final
										selection.
		Programme								Turn the programme selector knob
										to the desired programme. The
		selection								indicator next to the programme
										name lights up. The start indicator
										blinks to show, that the dryer is in
										selection mode. After the Start /
										Pause button is pressed the start
										indicator lamp lights up and the
										programme starts.
										Dryness adjustment is an option to
										adjust the dryness of the laundry
										according to your wishes. Select the
			Dryness							desired programme and the option
		Adjustment								dryness level adjustment by pressing
										the button “+“ for more dry or the
										button “–“ for more humid. The
										selected dryness will be stored as a
										pre-setting to the selected drying
										programme. Using the drying
										programme next time the pre-
										setting appears. By pressing the
										dryness adjustment buttons “+” or
										“–” the pre-setting can be changed.
			Filter							The indicator lamp lights up when
										the filter needs cleaning. Clean the
										filter at the end of every cycle.
										Lights up when water container
			Water							needs to be emptied. The drying
										cycle is automatically interrupted.
		Container
										Empty the water container. Press
										the Start/Pause button to restart the
										dryer and to continue the
										programme.

PROGRAMME SEQUENCE INDICATION

The programme sequence is indicated by lamps, switching on when programme step starts and switching off when the programme step is passed.

* Test programmes according IEC 61121

5019 407 00191

PREPARING THE LAUNDRY

1.Check that all fastenings are closed and that pockets are empty.

2.Turn the articles inside out.

3.Place laundry loosely in the drum to make sure it doesn’t become tangled.

Sort laundry as follows:

A)By care symbols (on the collar or inside seam):

Suitable for tumble drying

Tumble drying with reduced drying intensity only. Press gentle button

Do not tumble dry

B)By amount and thickness/weight

Whenever the load to be dried exceeds dryer capacity, separate laundry according to weight (e.g. towels from thin underwear).

C)By type of fabrics

Cotton/linen: towels, cotton jersey, bed and table linen made of cotton or linen.

Synthetics/Easy Care: blouses, shirts, overalls, etc. made of polyester or polyamide, as well as cotton/synthetic mixes.

D)By drying level

• Sort into: iron dry, cupboard dry, etc.

Do not tumble dry: woollens, silk, nylon stockings, delicate embroidery, fabrics with metallic decorations, bulky items such as sleeping bags, etc.

Important: only use specific indicated dryer-safe additives and rinse items that have been treated with stain remover thoroughly in plenty of water before drying. Only use specific indicated dryer-safe plastic items and never dry rubber or articles contaminated with vegetable oil in the dryer.

SELECTING A PROGRAMME & OPTIONS

Programme and Options:

•To select a programme, turn the programme selector knob to the required position. The Start/Pause indicator lamp is blinking, indicating that the cycle needs to be started.

•To select an option, press the corresponding button. The indicator light above the button lights up confirming that the selection has been made.

•Press the option button again to cancel the option.

STARTING & COMPLETING A

PROGRAMME

1.Having selected the desired programme and options, press the Start/Pause button.

If the laundry is not removed at the end of the drying cycle, an automatic anti-crease cycle will operate for maximum 60 min. The drum rotates at regular intervals, preventing the laundry from creasing.

Anti-Crease protection re-distributes laundry in the drum.

When the Anti-Crease option is selected and laundry has not been taken out, an anti-crease cycle is activated for 12 hrs.

2.On completion of the programme, set the programme selector knob to position “0”.

CHANGING A PROGRAMME

When changing the programme during the drying cycle, the dryer stops. The Start/ Pause indicator lamp is blinking.

To operate the new programme, press the Start/Pause button.

INTERRUPTING A PROGRAMME

To interrupt the dryer during operation

1.Set the programme selector knob to Airing.

2.Press the Start/Pause button.

Wait at least 5 minutes before opening the door to allow the dryer to cool down. For your safety the programme stops automatically if you open the door.

3.To restart, after door opening, close the door and press the Start/Pause button again.

DAILY MAINTENANCE & CLEANING

Clean the lint filter at the end of every drying cycle:

1.Open the door.

2.Pull the filter upwards.

3.Open the filter.

4.Remove lint using a soft brush or your fingertips.

5.Close the filter.

6.Push the filter back into place.

Empty the water container at the end of every drying cycle.

1.Pull the handle to remove the water container.

2.Empty the water container.

3.Replace the water container when empty by pushing it completely back in place.

TROUBLESHOOTING GUIDE

If a fault occurs, before contacting our After-Sales Service, make the following checks to try and remedy the problem:

Drying takes too long / laundry is not dry enough:

•Was the correct programme selected?

•Was the inserted laundry too wet (Washing machine spin speed less than 800 rpm? When the spinning speed is less than 800 rpm the water container fault may occur during the drying cycle)?

•Is the lint filter dirty (filter indicator lamp on)?

•Is the heat exchanger dirty (refer to the Instructions for use)?

•Is the ambient temperature too high?

The dryer does not operate: (after a power failure and/or interruption to the mains supply,

always press the Start/Pause button).

•Is the plug properly inserted into the mains electricity socket?

•Is there a power failure?

•Has the fuse blown?

•Is the door properly closed?

•Has the programme been selected?

•Has the Start/Pause button been pressed?

Lint filter or water container indicator lamp on:

•Is the lint filter clean?

•Is the water container empty?

•Is the water container correctly positioned?

•Is the heat exchanger clean?

Water droplets underneath the dryer:

•Is the heat exchanger correctly positioned?

•Has any fluff on the heat exchanger seal been wiped away?

•Has any fluff on the door seal been wiped away?

•Has the water container been positioned correctly?

All programme sequence indicators blinking:

•Service call necessary.

Replacing the drum light bulb (if supplied):

•If the inside lamp does not work, the bulb may be faulty.

•Unplug the dryer.

•Open the door and unscrew the glass cover insie the drum.

•Replace the faulty bulb with a new one and screw the glass cover back on.

•Replacement bulb: Philips 15W, 230/240V, E14.

AFTER-SALES SERVICE

If, after carrying out the above checks the malfunction persists or appears again, turn the dryer off and call our After-Sales Service (refer to guarantee).

Please specify:

•The nature of the fault.

•The dryer type and model.

•The service code (the number after the word Service on the adhesive rating plate) on the right-hand side when the door is open.

•Your full address and phone number.

5019 407 00191