Bang & Olufsen BeoLink Passive User Manual

B E O L I N K P A S S I V E

1
With the BeoLink Passive kit and
a pair of Passive Bang & Olufsen
loudspeakers your main Bang &
Olufsen system gets an extra
dimension.
Now you can play any source you like
and listen to it – via your BeoLink
installation – in the room with the
BeoLink Passive and your extra
speakers.
But this is not all. You can even control
the daily playback functions in your
main system via the BeoLink Passive,
using the Beo4 remote control.
This guide explains how...
User’s guide
2

C O N T E N T S

4 Nice to know about...
..Music in other rooms
5 Close-up operation
Sound control
Timer Play control
Volume adjustment
6 Remote operation
Using the Beo4 remote control
7 Controlling your main system
8 Nice to know
9 Adjusting BeoLink Passive sound
10 Using the Beolink 1000 remote
control
3
This guide describes how to operate your BeoLink Passive setup (BeoLink Passive kit and a pair of passive Bang & Olufsen loudspeakers).
The separate Setting-up guide, which is also enclosed with the BeoLink Passive kit, describes in detail how to install the BeoLink Passive with your Bang & Olufsen loudspeakers, and it describes how to make the BeoLink Passive ready for use.
4

…Music in other rooms

N I C E T O K N O W A B O U T …

The BeoLink Passive kit and your passive Bang & Olufsen loudspeakers give your main Bang & Olufsen system an extra dimension:
• You can listen to any source you like from your main system (audio or video) in your BeoLink Passive room.
• You can control a number of functions in your main system from your BeoLink Passive room - using the Beo4 remote control.
BeoLink Passive and the two speakers will give you the full benefit of the high-quality stereo sound produced by your main system.
This guide explains how…
Operating BeoLink Passive close-up, you can:
• Switch on to the radio (or TV) program that was last playing in your main Bang & Olufsen system, or listen-in on a source (audio/video) that is currently playing.
• Adjust the volume level in the two loudspeakers connected to the BeoLink Passive.
• Include your BeoLink Passive room in a Timer Play programming of your main system.
Using the Beo4 remote control, you can:
• Switch on any source you like in your main Bang & Olufsen system (audio/video) via the BeoLink Passive receiver.
• Operate all the daily playback functions for the source that is currently playing.
• Adjust the sound in the two loudspeakers connected to the BeoLink Passive.
Your main Bang & Olufsen system (audio, video, or AV) and your BeoLink Passive setup must be interconnected by a Bang & Olufsen BeoLink installation.
You will then be able to listen to any source from your main system (and even to control the source) in the room with your BeoLink Passive setup.
Loading...
+ 8 hidden pages