Bang & Olufsen BeoLab 8000 User Manual
BeoLab 8000
Guide
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: To reduce the risk of
electric shock, do not remove
cover (or back).
No User-serviceable parts inside.
Refer servicing to qualified service
personnel.
WARNING: To reduce the risk of fire or
electric shock, do not expose this appliance
to rain or moisture. Do not expose this equipment to dripping or splashing and ensure
that no objects filled with liquids, such as
vases, are placed on the equipment.
To completely disconnect this equipment
from the AC Mains, disconnect the power
supply cord plug from the AC receptacle.
The lightning flash with arrowhead symbol
within an equilateral triangle, is intended
to alert the user to the presence of un-
insulated “dangerous voltage” within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
For the US-market only!
NOTE: This equip ment has been tested and
found to comply with the limits for a class B
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protec tion against harmful interference in a residential in stal lation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
in stalled and used in accordance with the
instruc tions, may cause harmful interference
to radio communi cations. However, there is
no guaran tee that inter ference will not occur
in a particu lar in stal lation. If this equip ment
does cause harmful inter ference to radio or
tele vision re ception, which can be determined by turning the equip ment off and on,
the user is en cou raged to tr y to correct the
inter ference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equip-
ment and receiver.
– Connect the equipment into an outlet on a
cir cuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced radio/
TV technician for help.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the
literature accompanying the product.
READY FOR USE…
Once you have assembled the speakers they
are ready for connection to the audio system
(or video system), and to the mains (see
assembly instructions on the enclosed
instruction sheet).
Placement
The BeoLab 8000 occupies very little space on
the floor. In fact, it can be placed wherever it
is most convenient for your room layout, and
for your preferred listening position.
The BeoLab 80 00 is designed for use in dry
environments only!
3
The four rubber feet should be
mounted on the base
Loading...