Badger Meter THT Specifications

Model THT

Temperature Sensors

The Data Industrial THT
temperature sensor
provides accurate remote
temperature sensing for
use with Data Industrial
Series 340, 1550 and 2300
Btu meters and other
building automation
applications. The THT
includes unique mounting
hardware incorporating an
isolation valve allowing the temperature probe to be hot tapped, or installed in a working pipeline
without shutting down or draining the line. This hot tap capability allows temperature sensors to be
retrofit to existing pipelines at a fraction of the cost of thermowell installations. For Btu
measurement or submetering applications THT temperature sensors should always be installed in
pairs to match their reaction time to temperature change.

The THT sensor features a precision 10 KΩ thermistor element encapsulated with a temperature

conductive compound within a 316 Stainless Steel probe. These two-wire devices have a thermal
accuracy of +/- 0.36°F (0.2°C).

Model THT Dimensions

Ordering information

Model Number Description

THT-000 1" Stainless Steel hot tap temperature sensor complete
XTHT-000 Replacement thermistor probe
A-1027 Brass tapping nipple- adapts threads to NPT for tapping machine, re-useable

Data Industrial Corporation, 11 Industrial Drive, P.O. Box 740, Mattapoisett, MA 02739, Telephone: [phone] Fax: [phone]

web site: www.dataindustrial.com email: [e-mail]

Not a controlled document

082803

Specifications

Sensing element

2 wire thermistor (thermal resistor)

Accuracy

+/-0.36°F (0.2°C) from 32°F to
158°F (0°C to 70°C)

Temperature range

0°F to 250°F (-17°C to 121°C)

Stability

.024°F(0.13°C) over 5 years

Heat Dissipation

2mW/°C typical before potting

Temperature V.S. Resistance

10K: Thermistors

°F °C

32 0 32,654
50 10 19,903
68 20 12,493
77 25 10,000

86 30 8,056
104 40 5,325
122 50 3,602
140 60 2,488
158 70 1,753
176 80 1,257
194 90 917
212 100 679

Resistance

Ohms

Wetted Materials

316 Stainless Steel, Viton O-rings

Service connection size

1" NPT

Pressure rating

1,000 psi

Insertion force required

approximately 20% of line pressure

Mounting

1" NPT tap, tapping saddle or weldment

Electrical connection

6" 24 AWG flying leads with ½ conduit thread

Model THT Ball Valve Dimensions

Temperature probe removed from Valve

Data Industrial Corporation, 11 Industrial Drive, P.O. Box 740, Mattapoisett, MA 02739, Telephone: [phone] Fax: [phone]

web site: www.dataindustrial.com email: [e-mail]

Not a controlled document

082803