
ORION®
Water Endpoint
ORI-I-79 (11-11)
62014-144 Rev. 2
IMPORTANT:
This manual contains important information.
READ AND KEEP FOR REFERENCE.
Installation Data

Installation Data
CONTENTS
Overview ................................................................................................................................................................... 5
Product Unpacking and Inspection ........................................................................................................................ 5
License Requirements .............................................................................................................................................. 5
Identication ............................................................................................................................................................6
Network Endpoint Installation ................................................................................................................................ 7
Splicing Considerations ...........................................................................................................................................7
ORION Installation Kit Part Numbers ...................................................................................................................... 7
Pit Installation ...........................................................................................................................................................8
Through the Lid Installation Kit (SE, ME and CE Endpoints) .................................................................................8
Below Lid with Knuckles Installation Kit (ME and CE Endpoints) ......................................................................... 9
Integrated Pit Lid Hanger Installation Kit (ME and CE Endpoints) .....................................................................10
Vault Installation Kit (ME and CE Endpoints) .......................................................................................................10
Remote Installation ................................................................................................................................................11
Remote Wall Mount Box Enclosure Kit (SE, ME and CE Endpoints) .....................................................................11
Remote Installation Bracket Kit (SE, ME and CE Endpoints) ...............................................................................14
Wiring a Universal Endpoint ..................................................................................................................................17
Universal Endpoint Identication .........................................................................................................................17
Required Splice Tools .............................................................................................................................................17
Wiring the ORION Universal Endpoint to an Encoder ..........................................................................................17
Encoder Register Installation ................................................................................................................................19
11-11
Page iii

Installation Data
Overview
This manual contains installation and programming instructions for the ORION® water endpoint.
Proper performance and reliability of ORION endpoints depend upon installation in accordance with these instructions.
Product Unpacking and Inspection
Upon receipt of the product, perform the following unpacking and inspection procedures.
NOTE: If damage to the shipping container is evident upon receipt, request the carrier to be present when the product is
unpacked.
Carefully open the shipping package, follow any instructions that may be marked on the exterior. Remove all cushioning
material surrounding the product and carefully lift the product from the package.
Retain the package and all packing material for possible use in reshipment or storage.
Visually inspect the product and applicable accessories for any physical damage such as scratches, loose or broken parts or
any other sign of damage that may have occurred during shipment.
NOTE: If damage is found, request an inspection by the carrier’s agent within 48 hours of delivery and le a claim with
the carrier. A claim for equipment damage in transit is the sole responsibility of the purchaser.
Carefully remove the pre-wired ORION endpoint and encoder assembly or ORION endpoint from the shipping carton and
inspect for damage. Retain the contents of the installation kit for use in mounting the endpoint in the eld.
License Requirements
This device complies with Part 15 of FCC Rules. Operation of this device is subject to the following conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation of the device.
In accordance with FCC Regulations, “Code of Federal Regulations” Title 47, Part 2, Subpart J, Section 1091, transmitters pass
the requirements pertaining to RF radiation exposure. However, to avoid public exposure in excess of limits for general
population (uncontrolled exposure), a 40 centimeter distance between the transmitter and the body of the user must be
maintained during testing.
No FCC license is required by a utility to operate an ORION SE meter reading system.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement.
IMPORTANT
Transportation: The Federal Aviation Administration prohibits operating endpoints and receivers on all commercial aircraft.
The ORION endpoint is considered an operating transmitter and cannot be shipped by air.
11-11
Page 5

ORION® Water Endpoint
Identication
Each ORION endpoint can be identied using the unique numeric serial number located on a tag attached to the wire harness
and etched on the top (CE) or side (SE, ME) of the endpoint housing. Each Badger Meter encoder is clearly identied on the
face of the register with an assembly number, unit of measure and meter model.
SE/ME Endpoint (Medium Gray) CE RTR® Endpoint (Black) CE ADE® Endpoint (Light Gray)
Recordall® Transmitter
Register (RTR®)
Absolute Digital
Encoder (ADE®)
Figure 1: Endpoints and Encoders
Page 6
11-11