Baby Lock BLSOG2 Ellisimo Gold II User Manual

Page 1

Page 2

Trademarks

FlashFX® is a registered trademark of Datalight, Inc. FlashFX U.S.Patent Office 5,860,082/6,260,156 FlashFX Datalight Copyright 1989-2007 Datalight, Inc., All Rights Reserved Video powered by Mobiclip™ encoding and playback technology.

Pro™ is a trademark of Datalight, Inc.

is a registered trademark of Datalight, Inc.

IMPORTANT:

READ BEFORE DOWNLOADING, COPYING, INSTALLING OR USING. By downloading, copying, installing or using the software you agree to this license. If you do not agree to this license, do not download, install, copy or use the software.

Intel License Agreement For Open Source Computer Vision Library

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

• Redistribution’s of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

• Redistribution’s in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

• The name of Intel Corporation may not be used to endorse or promote products derived from this software without specific prior written permission.

This software is provided by the copyright holders and contributors “as is” and any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. In no event shall Intel or contributors be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possibility of such damage.

All information provided related to future Intel products and plans is preliminary and subject to change at any time, without notice.

Secure Digital (SD) Card is a registered trademark or a trademark of SD Card Association. CompactFlash is a registered trademark or a trademark of Sandisk Corporation. Memory Stick is a registered trademark or a trademark of Sony Corporation. SmartMedia is a registered trademark or a trademark of Toshiba Corporation. MultiMediaCard (MMC) is a registered trademark or a trademark of Infineon Technologies AG. xD-Picture Card is a registered trademark or a trademark of Fuji Photo Film Co. Ltd. IBM is a registered trademark or a trademark of International Business Machines Corporation. Microsoft, Windows and Windows Vista are registered trademarks or trademarks of Microsoft Corporation. “Adobe” and “Adobe Reader” are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.

Each company whose software title is mentioned in this manual has a Software License Agreement specific to its proprietary programs.

All other brands and product names mentioned in this manual are registered trademarks of their respective companies. However, the explanations for markings such as ® and ™ are not clearly described within the text.

Page 3

INTRODUCTION

Thank you for purchasing this embroidery and sewing machine. Before using this machine, carefully read the “IMPORTANT SAFETY INSTRUCTIONS”, and then study this manual for the correct operation of the various functions. In addition, after you have finished reading this manual, store it where it can quickly be accessed for future reference.

IMPORTANT SAFETY INSTRUCTIONS

Please read these safety instructions before attempting to use the machine.

DANGER - To reduce the risk of electric shock

1Always unplug the machine from the electrical outlet immediately after using, when cleaning, when making any

user servicing adjustments mentioned in this manual, or if you are leaving the machine unattended.

WARNING - To reduce the risk of burns, fire, electric shock, or injury to

persons.

2Always unplug the machine from the electrical outlet when removing covers, or when making any adjustments

mentioned in the instruction manual.

• To unplug the machine, switch the machine to the symbol “O” position to turn it off, then grasp the plug and pull it out of the electrical outlet. Do not pull on the cord.

• Plug the machine directly into the electrical outlet. Do not use an extension cord.

• Always unplug your machine if the power is cut.

3Electrical Hazards:

• This machine should be connected to an AC power source within the range indicated on the rating label. Do not connect it to a DC power source or inverter. If you are not sure what kind of power source you have, contact a qualified electrician.

• This machine is approved for use in the country of purchase only.

4Never operate this machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped

or damaged, or water is spilled on the unit. Return the machine to the nearest authorized retailer for examination, repair, electrical or mechanical adjustment.

• While the machine is stored or in use if you notice anything unusual, such as an odor, heat, discoloration or deformation, stop using the machine immediately and unplug the power cord.

• When transporting the sewing machine, be sure to carry it by its handle. Lifting the sewing machine by any other part may damage the machine or result in the machine falling, which could cause injuries.

• When lifting the sewing machine, be careful not to make any sudden or careless movements, otherwise you may injure your back or knees.

Page 4

IMPORTANT SAFETY INSTRUCTIONS

5Always keep your work area clear:

• Never operate the machine with any air openings blocked. Keep ventilation openings of the sewing machine and foot control free from the build up of lint, dust, and loose cloth.

• Do not store objects on the foot controller.

• Do not use extension cords. Plug the machine directly into the electrical outlet.

• Never drop or insert any object into any opening.

• Do not operate where aerosol (spray) products are being used or where oxygen is being administered.

• Do not use the machine near a heat source, such as a stove or iron; otherwise, the machine, power cord or garment being sewn may ignite, resulting in fire or an electric shock.

• Do not place this sewing machine on an unstable surface, such as an unsteady or slanted table, otherwise the sewing machine may fall, resulting in injuries.

6Special care is required when sewing:

• Always pay close attention to the needle. Do not use bent or damaged needles.

• Keep fingers away from all moving parts. Special care is required around the machine needle.

• Switch the sewing machine to the symbol “O” position to turn it off when making any adjustments in the needle area.

• Do not use a damaged or incorrect needle plate, as it could cause the needle to break.

• Do not push or pull the fabric when sewing, and follow careful instruction when free motion stitching so that you do not deflect the needle and cause it to break.

7This machine is not a toy:

• Your close attention is necessary when the machine is used by or near children.

• The plastic bag that this sewing machine was supplied in should be kept out of the reach of children or disposed of. Never allow children to play with the bag due to the danger of suffocation.

• Do not use outdoors.

8For a longer service life:

• When storing this machine, avoid direct sunlight and high humidity locations. Do not use or store the machine near a space heater, iron, halogen lamp, or other hot objects.

• Use only neutral soaps or detergents to clean the case. Benzene, thinner, and scouring powders can damage the case and machine, and should never be used.

• Always consult the operation manual when replacing or installing any assemblies, the presser feet, needle, or other parts to assure correct installation.

9For repair or adjustment:

• If the light unit is damaged, it must be replaced by an authorized retailer.

• In the event a malfunction occurs or adjustment is required, first follow the troubleshooting table in the back of the operation manual to inspect and adjust the machine yourself. If the problem persists, please consult your local authorized Baby Lock retailer.

Page 5

IMPORTANT SAFETY INSTRUCTIONS

Use this machine only for its intended use as described in the manual.

Use accessories recommended by the manufacturer as contained in this manual.

Use only the interface cable (USB cable) included with this machine.

Use only the USB mouse included with this machine.

Use only the pen tablet included with this machine.

The contents of this manual and specifications of this product are subject to change without notice.

For additional product information and updates, visit our website at www.babylock.com

SAVE THESE INSTRUCTIONS

This machine is intended for household use.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

FOR USERS IN THE UK, EIRE, MALTA

AND CYPRUS ONLY

IMPORTANT

• In the event of replacing the plug fuse, use a fuse approved by ASTA to BS 1362, i.e. carrying the mark,

rating as marked on plug.

• Always replace the fuse cover. Never use plugs with the fuse cover omitted.

• If the available electrical outlet is not suitable for the plug supplied with this equipment, you should contact your

authorized retailer to obtain the correct lead.

Page 6

IMPORTANT SAFETY INSTRUCTIONS

Federal Communications Commission (FCC)

Declaration of Conformity (For USA Only)

Responsible Party: Tacony Corporation

1760 Gilsinn Lane, Fenton, Missouri 63026 USA

declares that the product

Product Name: Model Number:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Baby Lock Sewing Machine BLSOG2

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the retailer or an experienced radio/TV technician for help.

• The included interface cable should be used in order to ensure compliance with the limits for a Class B digital device.

• Changes or modifications not expressly approved by Tacony Corporation could void the user’s authority to operate the equipment.

Page 7

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

WARNING LABEL

The following warning label is on the included side cutter. Be sure to observe the precaution.

• When using the side cutter, sew between low and mid-speed and do not touch the knives or operation lever of the side cutter while sewing to avoid equipment damage or injury.

a Guide plate (lower knife) b Upper knife c Operation lever

Label location

Page 8

OUTSTANDING FEATURES

Display the Fabric While Aligning the Embroidering Position

The fabric hooped in the embroidery frame can be displayed on the LCD so that the embroidery position can be easily aligned.

This feature allows you to easily combine patterns while checking the final image. See “Display the Fabric While Aligning the Embroidering Position” on page 211.

Expand Your Creativity With Bobbin Work

Example with decorative stitches

You can create bobbin work, which gives a threedimensional appearance to the surface of the fabric, by winding the bobbin with heavy weight thread or ribbon too thick to be fed through the sewing machine needle and sewing on the wrong side of the fabric.

Bobbin work is sewn using the special bobbin case (gray) included with this machine. See “How to Create Bobbin Work” on page 307.

Multi-Function Foot Controller Allows You Easy Sewing

Change the Pattern Size While Maintaining the Desired Thread Density (Stitch Recalculator)

In the embroidery edit screen, the size of the pattern can be changed while the desired thread density is maintained.

With this function, the pattern will be enlarged or reduced at a larger ratio than with normal pattern resizing.

See “Changing the Pattern Size While Maintaining the Desired Thread Density (Stitch Recalculator)” on page 270.

The multi-function foot controller allows you various sewing machine operations in addition to starting/stopping sewing, such as thread cutting and reverse stitching, can be specified to be performed. See Instruction and Reference Guide Addendum.

Page 9

Find New Color Schemes With

Create Patterns With On Screen

the Color Visualizer Function

With the Color Visualizer function, the machine suggests new color schemes for the embroidery pattern that you have selected. After you select the desired effect from one of the four available color schemes (“RANDOM”, “VIVID”, “GRADIENT” and “SOFT”) the sample for the selected effect is displayed. See “Find New Color Schemes With the Color Visualizer Function” on page 283.

LED Pointer Shows You the

Designer™

Any image that you draw in the LCD screen area of your machine can immediately become an embroidery pattern. Specify colors and sewing settings as you desire. Compose embroidery from children’s drawings or of your signature to add to your original artwork. This is a function that everyone will enjoy using. The included pen tablet makes this function even easier to use. Refer to the instruction manual (PDF format) stored in the On Screen Designer™ CD.

Needle Drop Position

Included Embroidery foot with LED pointer indicates the needle position with a red LED point. The LED pointer shows you the location of the needle penetration so that it is easier to adjust the embroidery position. See “Attaching Embroidery Foot “W2”” on page 186 of this guide, and Instruction and Reference Guide Addendum.

Easily Perform On Screen Designer™ Operations With the Included Pen Tablet

The included pen tablet can be used to perform On Screen Designer™ operations effectively, along with normal screen operations. Since the range of operation with the pen tablet is wider than the machine’s LCD screen, you can easily perform intricate procedures.

See “Using the Pen Tablet” on page 23 and “Using the Pen Tablet” on page 34.

Page 10

WHAT YOU CAN DO WITH THIS MACHINE

Getting Ready

To learn the operation of the principal parts and the screens

Chapter 1

Page 25

Utility Stitches

Pre-programmed with more than 100 frequently used stitches

Chapter 3

Page 89

Embroidery

Maximum 30 cm × 20 cm (approx. 12 × 8 inches) for large embroidery designs

Sewing Basics

To learn how to prepare for sewing and basic sewing operations

Chapter 2

Page 71

Character/Decorative Stitches

The variety of stitches widen your creativity

Chapter 4

Page 155

Embroidery Edit

Designs can be combined, rotated or enlarged

Chapter 5

Page 185

How to Create Bobbin Work

To learn how to create bobbin work

Chapter 7

Page 307

Chapter 6

Page 263

Appendix

Caring for your machine and dealing with errors and malfunctions

Chapter 8

Page 325

Page 11

HOW TO USE THIS MANUAL

Chapter 1 Chapter 2

Chapter 3

Chapter 4

Chapter 1 Chapter 2 Chapter 5 Chapter 6

Chapter 1 and Chapter 2 explain your sewing machine’s basic operation procedures for someone who is using the sewing machine for the first time. If you want to sew utility stitches or character/ decorative stitches, read Chapter 1 and Chapter 2, then go on to Chapter 3 (Utility Stitches) or Chapter 4 (Character/ Decorative Stitches). When you are ready to begin using the embroidery function after reading Chapter 1 and Chapter 2, proceed to Chapter 5 (Embroidery). Once you understand the steps explained in Chapter 5, go on to Chapter 6 (Embroidery Edit) for an explanation about the embroidery edit functions. In the screens appearing in the step-by-step instructions, the parts referred to in the operations are marked

with . Compare the screen in the directions with the actual screen, and carry out the operation. If, while using the machine, you experience something you do not understand, or there is a function you

would like to know more about, refer to the index at the back of the Instruction and Reference Guide in conjunction with the table of contents to find the section of the manual you should refer to.

To sew utility stitches To sew character or decorative stitches

To do machine embroidery

Page 12

CONTENTS

INTRODUCTION ..................................................1

IMPORTANT SAFETY INSTRUCTIONS .................1

OUTSTANDING FEATURES ..................................6

WHAT YOU CAN DO WITH THIS MACHINE ......8

HOW TO USE THIS MANUAL ..............................9

NAMES OF MACHINE PARTS AND THEIR

FUNCTIONS.........................................................13

Machine................................................................................13

Needle and Presser Foot Section ...........................................14

Embroidery Unit....................................................................15

Operation Buttons.................................................................15

Using the Flat Bed Attachment..............................................16

Using the Accessory Case......................................................16

Using the Embroidery Unit Carrying Case .............................17

Included Accessories.............................................................17

Options.................................................................................20

Using the Spool Stand ...........................................................21

Using the Pen Tablet .............................................................23

Chapter 1 Getting Ready 25

TURNING THE MACHINE ON/OFF....................26

LCD SCREEN .......................................................28

USB Connectivity ..................................................................32

Using the Machine Setting Mode Key ...................................35

Using the Sewing Machine Help Key ...................................44

Using the Operation Guide Function.....................................45

Using the Sewing Guide Function .........................................46

Using the Pattern Explanation Function .................................47

LOWER THREADING ..........................................48

Winding the Bobbin ..............................................................48

Setting the Bobbin .................................................................54

Pulling Up the Bobbin Thread ...............................................55

UPPER THREADING............................................57

Upper Threading...................................................................57

Using the Twin Needle Mode................................................60

Using the Spool Stand ...........................................................63

Using Threads that Unwind Quickly .....................................64

CHANGING THE PRESSER FOOT .......................65

Removing the Presser Foot ....................................................65

Attaching the Presser Foot .....................................................65

Attaching the Walking Foot ...................................................66

CHANGING THE NEEDLE...................................67

About the Needle ..................................................................69

Fabric/Thread/Needle Combinations .....................................69

Chapter 2 Sewing Basics 71

SEWING ..............................................................72

Sewing a Stitch......................................................................72

Sewing Reinforcement Stitches..............................................74

Sewing Curves.......................................................................74

Changing Sewing Direction...................................................75

Sewing Heavyweight Fabrics.................................................75

Sewing Hook-and-Loop Fastener ...........................................76

Sewing Lightweight Fabrics ...................................................76

Sewing Stretch Fabrics...........................................................77

STITCH SETTINGS...............................................78

Setting the Stitch Width.........................................................78

Setting the Stitch Length ........................................................79

Setting the Thread Tension ....................................................79

USEFUL FUNCTIONS..........................................81

Automatic Reinforcement Stitching .......................................81

Automatic Thread Cutting .....................................................82

Using the Knee Lifter .............................................................83

Pivoting.................................................................................84

Automatic Fabric Sensor System (Automatic Presser Foot

Pressure)................................................................................85

Needle Position – Stitch Placement....................................... 86

Locking the Screen ............................................................... 86

Checking the Needle Location in the Screen......................... 87

Chapter 3 Utility Stitches 89

SELECTING UTILITY STITCHES .......................... 90

Selecting a Stitch .................................................................. 91

Saving Your Stitch Settings.................................................... 92

SEWING THE STITCHES ..................................... 94

Straight Stitches .................................................................... 94

Dart Seam............................................................................. 99

Gathering ............................................................................. 99

Flat Fell Seam ..................................................................... 100

Pintuck ............................................................................... 101

Zigzag Stitches.................................................................... 102

Elastic Zigzag Stitches......................................................... 104

Overcasting ........................................................................ 105

Quilting.............................................................................. 110

Blind Hem Stitches............................................................. 122

Appliqué............................................................................. 125

Shelltuck Stitches................................................................ 126

Scallop Stitches................................................................... 127

Crazy Quilting.................................................................... 127

Smocking Stitches............................................................... 128

Fagoting.............................................................................. 128

Tape or Elastic Attaching .................................................... 129

Heirloom............................................................................ 130

One-step Buttonholes ......................................................... 132

Four-step Buttonholes ......................................................... 136

Bar Tacks............................................................................ 140

Button Sewing .................................................................... 142

Eyelet.................................................................................. 144

Multi-directional Sewing (Straight Stitch and Zigzag Stitch)

Zipper Insertion.................................................................. 146

Edge Sewing ....................................................................... 148

... 145

Chapter 4 Character/Decorative Stitches 155

SELECTING STITCH PATTERNS ........................ 156

Selecting Decorative Stitch Patterns/7mm Decorative Stitch Patterns/Satin Stitch Patterns/7mm Satin Stitch Patterns/

Cross Stitch/Utility Decorative Stitch Patterns ..................... 158

Alphabet Characters ........................................................... 158

SEWING STITCH PATTERNS ............................ 161

Sewing Attractive Finishes .................................................. 161

Basic Sewing ...................................................................... 161

Making Adjustments........................................................... 162

EDITING STITCH PATTERNS............................ 164

Changing the Size............................................................... 166

Changing the Length (for 7mm Satin Stitch Patterns Only)

Creating a Vertical Mirror Image......................................... 166

Creating a Horizontal Mirror Image .................................... 167

Sewing a Pattern Continuously ........................................... 167

Changing Thread Density (for Satin Stitch Patterns Only) .... 167

Returning to the Beginning of the Pattern............................ 168

Checking the Image............................................................ 168

COMBINING STITCH PATTERNS..................... 170

Before Combining............................................................... 170

Combining Various Stitch Patterns...................................... 170

Combining Large and Small Stitch Patterns......................... 171

Combining Horizontal Mirror Image Stitch Patterns ............ 172

Combining Stitch Patterns of Different Length..................... 173

Making Step Stitch Patterns (for 7mm Satin Stitch Patterns Only)

USING THE MEMORY FUNCTION .................. 176

Stitch Data Precautions....................................................... 176

Saving Stitch Patterns in the Machine’s Memory................. 177

Saving Stitch Patterns to USB Media................................... 178

Saving Stitch Patterns in the Computer................................ 179

Retrieving Stitch Patterns from the Machine’s Memory ....... 180

.... 166

.... 174

Page 13

CONTENTS

Recalling from USB Media.................................................. 181

Recalling from the Computer ..............................................182

Chapter 5 Embroidery 185

BEFORE EMBROIDERING .................................186

Embroidery Step by Step .....................................................186

Attaching Embroidery Foot “W2”........................................ 186

Attaching the Embroidery Unit............................................188

SELECTING PATTERNS......................................190

Selecting Embroidery Patterns/Baby Lock “Exclusives”/ Greek Alphabet Patterns/Floral Alphabet Patterns/

Utility Embroidery Patterns .................................................193

Selecting Alphabet Character Patterns.................................194

Selecting Frame Patterns .....................................................196

Selecting Patterns from Embroidery Cards........................... 197

Selecting Patterns from USB Media/Computer..................... 197

VIEWING THE SEWING SCREEN......................198

PREPARING THE FABRIC ..................................200

Attaching Iron-on Stabilizers (Backing) to the Fabric ...........200

Hooping the Fabric in the Embroidery Frame ...................... 202

Embroidering Small Fabrics or Fabric Edges ........................ 205

ATTACHING THE EMBROIDERY FRAME..........206

CONFIRMING THE PATTERN POSITION.........208

Aligning the Embroidering Position Using the Built-In Camera Display the Fabric While Aligning the Embroidering Position Using the Built-In Camera to Align the Embroidering Position

Checking the Pattern Position .............................................216

Previewing the Completed Pattern ......................................217

SEWING AN EMBROIDERY PATTERN ..............218

Sewing Attractive Finishes...................................................218

Using Prewound Bobbins.................................................... 219

Sewing Embroidery Patterns................................................220

Sewing Embroidery Patterns Which Use Appliqué ..............221

PRINT AND STITCH (COMBINING EMBROIDERY PATTERNS AND PRINTED

DESIGNS) .........................................................223

Selecting a Pattern ..............................................................224

Outputting the Background Image and Positioning Image ...225

Printing the Background and Embroidery Position Sheet ..... 226

Sewing Embroidery Patterns................................................227

ADJUSTMENTS DURING THE EMBROIDERY

PROCESS ............................................................229

If the Bobbin Runs Out of Thread........................................ 229

If the Thread Breaks During Sewing ....................................230

Restarting from the Beginning ............................................. 231

Resuming Embroidery After Turning Off the Power ............. 231

MAKING EMBROIDERY ADJUSTMENTS ..........233

Adjusting Thread Tension ...................................................233

Adjusting the Alternate Bobbin Case (with No Color on the

Screw)................................................................................. 234

Using the Automatic Thread Cutting Function

(END COLOR TRIM)........................................................... 235

Using the Thread Trimming Function (JUMP STITCH TRIM)

Adjusting the Embroidery Speed .........................................237

Changing the Thread Color Display ....................................237

Changing the Embroidery Frame Display ............................238

REVISING THE PATTERN ..................................240

Moving the Pattern.............................................................. 240

Aligning the Pattern and the Needle.................................... 240

Changing the Size of the Pattern ......................................... 241

Rotating the Pattern............................................................. 242

Creating a Horizontal Mirror Image ....................................243

Changing the Density (Alphabet Character and Frame

Patterns Only) ..................................................................... 244

Changing the Colors of Alphabet Character Patterns ...........245

Embroidering Linked Characters .........................................245

Uninterrupted Embroidering (Using a Single Color).............248

...... 208

..... 211

.... 213

..... 236

USING THE MEMORY FUNCTION .................. 249

Embroidery Data Precautions ..............................................249

Saving Embroidery Patterns in the Machine’s Memory ........251

Saving Embroidery Patterns to USB Media...........................252

Saving Embroidery Patterns in the Computer.......................253

Retrieving Patterns from the Machine’s Memory..................254

Recalling from USB Media ..................................................255

Recalling from the Computer...............................................256

EMBROIDERY APPLICATIONS ......................... 258

Using a Frame Pattern to Make an Appliqué (1)...................258

Using a Frame Pattern to Make an Appliqué (2)...................259

Sewing Split Embroidery Patterns ........................................261

Chapter 6 Embroidery Edit 263

EXPLANATION OF FUNCTIONS...................... 264

SELECTING PATTERNS TO EDIT ...................... 265

Selecting Embroidery Patterns/Baby Lock “Exclusives”/ Greek Alphabet Patterns/Floral Alphabet Patterns/

Utility Embroidery Patterns/Frame Patterns..........................266

Selecting Alphabet Character Patterns .................................266

EDITING PATTERNS ......................................... 268

Moving the Pattern ..............................................................270

Rotating the Pattern .............................................................270

Changing the Size of the Pattern..........................................270

Changing the Pattern Size While Maintaining the Desired

Thread Density (Stitch Recalculator)....................................270

Deleting the Pattern.............................................................272

Displaying Patterns in the Screen Magnified by 200% ......... 272

Changing the Configuration of Alphabet Character Patterns

Changing Alphabet Character Spacing ................................273

Reducing Character Spacing................................................274

Separating Combined Character Patterns.............................275

Changing the Color of Each Alphabet Character in a Pattern

Embroidering Linked Characters ..........................................277

Changing the Thread Color .................................................277

Creating a Custom Thread Table .........................................278

Choosing a Color from the Custom Thread Table ................282

Find New Color Schemes With the Color Visualizer Function

Designing Repeated Patterns ...............................................285

Embroidering the Pattern Repeatedly...................................290

Duplicating a Pattern...........................................................293

After Editing ........................................................................293

COMBINING PATTERNS .................................. 294

Editing Combined Patterns ..................................................294

Sewing Combined Patterns..................................................297

VARIOUS EMBROIDERING FUNCTIONS ........ 298

Uninterrupted Embroidering (Using a Single Color) .............298

Basting Embroidery .............................................................298

Creating an Appliqué Piece.................................................299

USING THE MEMORY FUNCTION .................. 305

PRINT AND STITCH (COMBINING EMBROIDERY PATTERNS AND PRINTED

DESIGNS) ........................................................ 305

.....273

....276

.......283

Chapter 7 How to Create Bobbin Work 307

ABOUT BOBBIN WORK................................... 308

PREPARING FOR BOBBIN WORK.................... 309

Required Materials ..............................................................309

Upper Threading.................................................................310

Preparing the Bobbin Thread ...............................................310

CREATING BOBBIN WORK (SEWING) ............ 314

Positioning the Fabric and Sewing.......................................314

Bobbin Work Free Motion Sewing.......................................317

CREATING BOBBIN WORK (EMBROIDERY) ... 318

Selecting the Pattern............................................................318

Start Embroidering...............................................................320

ADJUSTING THE THREAD TENSION............... 322

TROUBLESHOOTING ...................................... 323

Page 14

CONTENTS

Chapter 8 Appendix 325

CARE AND MAINTENANCE..............................326

Restrictions on oiling...........................................................326

Precautions on storing the machine.....................................326

Cleaning the LCD Screen ....................................................326

Cleaning the Machine Casing..............................................326

Cleaning the Race ...............................................................326

Cleaning the Bobbin Case ...................................................328

Cleaning the Cutter in the Bobbin Case Area.......................329

About the Maintenance Message .........................................329

ADJUSTING THE SCREEN .................................330

Adjusting the Brightness of the Screen Display ....................330

Touch Panel is Malfunctioning ............................................330

TROUBLESHOOTING .......................................331

Frequent troubleshooting topics ..........................................331

Upper thread is too tight......................................................331

Tangled thread on wrong side of fabric ...............................332

Incorrect thread tension.......................................................334

Fabric is caught in the machine and cannot be removed .....335

List of Symptoms .................................................................338

ERROR MESSAGES ............................................342

SPECIFICATIONS ..............................................350

UPGRADING YOUR MACHINE’S SOFTWARE

Upgrade Procedure Using USB Media.................................351

Upgrade Procedure Using Computer...................................352

STITCH SETTING CHART..................................353

INDEX ...............................................................362

......351

Page 15

NAMES OF MACHINE PARTS AND THEIR FUNCTIONS

The names of the various parts of the sewing machine and their functions are described below. Before using the sewing machine, carefully read these descriptions to learn the names of the machine parts.

Machine

■ Front View

a Top cover

Open the top cover to thread the machine and wind the bobbin.

b Pre-tension disk

Pass the thread around the pre-tension disk when winding the bobbin thread. (page 48)

c Thread guide for bobbin winding

Pass the thread through this thread guide when winding the bobbin thread. (page 48)

d Spool pin

Place a spool of thread on the spool pin. (page 57)

e Spool cap

Use the spool cap to hold the spool of thread in place. (page 57)

f Supplemental spool pin

Use this spool pin to wind the bobbin thread, or to sew with the twin needle. (page 48, 60)

g Bobbin winder

Use the bobbin winder when winding the bobbin. (page 48)

h LCD (liquid crystal display)

Settings for the selected stitch and error messages appear in the LCD. (page 28)

i Knee lifter

Use the knee lifter to raise and lower the presser foot. (page 83)

j Knee lifter slot

Insert the knee lifter into the slot. (page 83)

k Operation buttons (6 buttons) and sewing speed

controller

Use these buttons and the slide to operate the sewing machine. (page 15)

l Flat bed attachment with accessory compartment

Store presser feet and bobbins in the accessory compartment of the flat bed attachment. When sewing cylindrical pieces, remove the flat bed attachment. (page 16)

m Thread cutter

Pass the threads through the thread cutter to cut them. (page

59)

n Thread guide plate

Pass the thread around the thread guide plate when threading upper thread. (page 57)

■ Right-side/Rear View

a Handle

Carry the sewing machine by its handle when transporting the machine.

b Presser foot lever

Raise and lower the presser foot lever to raise and lower the presser foot. (page 65)

c Main power switch

Use the main power switch to turn the sewing machine ON and OFF. (page 26)

d Multi-function foot controller

Various sewing machine operations can be programmed into the multi-function foot controller. (See Instruction and Reference Guide Addendum.)

e Power cord receptacle

Insert the power cord into the machine receptacle. (page 26)

f Air vent

The air vent allows the air surrounding the motor to circulate. Do not cover the air vent while the sewing machine is being used.

g Foot controller jack and external port

Insert the foot controller plugs where indicated. (page 73, Instruction and Reference Guide Addendum)

h Speaker i USB port for computer

In order to import/export patterns between a computer and the machine, plug the USB cable into the USB port. (page 32, 179,

253)

j USB port for mouse (page 32) k Primary (top) USB port for media

In order to send patterns from/to USB media, plug the USB media directly into the USB port. (page 178, 252)

l Touch pen holder

Use the touch pen holder to hold the touch pen when not in use.

m Handwheel

Rotate the handwheel toward you (counterclockwise) to raise and lower the needle. The wheel should be turned toward the front of the machine.

Page 16

NAMES OF MACHINE PARTS AND THEIR FUNCTIONS

Needle and Presser Foot Section

a Buttonhole lever

The buttonhole lever is used with the one-step buttonhole foot to create buttonholes. (page 132)

b Presser foot holder

The presser foot is attached to the presser foot holder. (page

65)

c Presser foot holder screw

Use the presser foot holder screw to hold the presser foot in place. (page 66)

d Presser foot

The presser foot consistently applies pressure to the fabric as sewing takes place. Attach the appropriate presser foot for the selected stitch. (page 65)

e Feed dogs

The feed dogs feed the fabric in the sewing direction.

f Bobbin cover

Open the bobbin cover to set the bobbin. (page 54, 103)

g Needle plate cover

Remove the needle plate cover to clean the race. (page 97,

219)

h Needle plate

The needle plate is marked with guides to help sew straight seams. (page 96)

i Needle bar thread guide

Pass the upper thread through the needle bar thread guide. (page 57)

j Needle clamp screw

Use the needle clamp screw to hold the needle in place. (page

66)

Measurements on the needle plate, bobbin cover (with mark) and needle plate cover

The measurements on the bobbin cover are references for patterns with a middle (center) needle position. The measurements on the needle plate and the needle plate cover are references for stitches with a left needle position.

a For stitches with a middle (center) needle position b For stitches with a left needle position c Left needle position on the needle plate <inch> d Left needle position on the needle plate <cm> e Middle (center) needle position on the bobbin cover

(with mark) <inch>

f Left needle position on the needle plate cover <inch>

Page 17

NAMES OF MACHINE PARTS AND THEIR FUNCTIONS

CAUTION

Embroidery Unit

a Carriage

The carriage moves the embroidery frame automatically when embroidering. (page 188)

b Release button (located under the embroidery unit)

Press the release button to remove the embroidery unit. (page

189)

c Embroidery frame holder

Insert the embroidery frame into the embroidery frame holder to hold the frame in place. (page 206)

d Frame-securing lever

Press the frame-securing lever down to secure the embroidery frame. (page 206)

e Embroidery unit connection

Insert the embroidery unit connection into the connection port when attaching the embroidery unit. (page 188)

• After the embroidery frame is set in the frame holder, be sure the frame-securing lever is correctly lowered.

Operation Buttons

a “Start/Stop” button

Press this button and the machine will sew a few stitches at a slow speed and then begin sewing at the speed set by the sewing speed controller. Press the button again to stop the machine. Hold the button in to sew at the machine’s slowest speed. The button changes color according to the machine’s operation mode.

Green: The machine is ready to sew or is sewing.

Red: The machine cannot sew.

b “Reverse/Reinforcement Stitch” button

Use this button to sew reinforcement stitches at the beginning and end of sewing. Press this button, and the machine sews 3 stitches in the same spot and stops automatically. For straight and zigzag stitch patterns that take reverse stitches, the machine will sew reverse stitches at low speed only while holding down the “Reverse/Reinforcement Stitch” button (the stitches are sewn in the opposite direction).

c “Needle Position” button

Use this button when changing sewing direction or for detailed sewing in small areas. Press this button to raise or lower the needle position. With this button, you can lower and raise the needle to sew a single stitch.

d “Thread Cutter” button

Press this button after sewing to automatically trim the excess thread.

e “Presser Foot Lifter” button

Press this button to lower the presser foot and apply pressure to the fabric. Press this button again to raise the presser foot.

f Sewing Speed controller

Use this controller to adjust the sewing speed. Move the slide to the left to sew at slower speeds. Move the slide to the right to sew at higher speeds. Beginners should sew at a slow speed.

g “Automatic Threading” button

Use this button to automatically thread the needle.

• Do not press the thread cutter button after the threads have been cut. The needle may break and threads may become tangled, or damage to the machine may occur.

Page 18

NAMES OF MACHINE PARTS AND THEIR FUNCTIONS

Using the Flat Bed Attachment

Pull the top of the flat bed attachment to open the accessory compartment.

Using the Accessory Case

■ Opening the Accessory Case

Fully slide the bar on each side of the accessory case, and then lift off the lid to open the case. The case can only be opened or locked correctly if both bars are slid in the same direction.

■ Closing the Accessory Case

Fully slide the bar on each side of the

accessory case lid to align the notches in the lid with the notches in the bars.

Place the lid on top of the case so that the

notches in the lid align with the tabs on the case, and then slide the bar on each side back to the center of the accessory case.

a Bars

Page 19

■ Using the Accessory Trays

Two presser foot storage trays are stored in the included accessory case. One is for presser feet for utility sewing, and the other is for presser feet for embroidery and machine quilting.

a For presser feet for utility sewing b For presser feet for embroidery and machine

quilting

For your convenience, a presser foot storage tray can be stored in the accessory compartment of the flat bed attachment.

NAMES OF MACHINE PARTS AND THEIR FUNCTIONS

Using the Embroidery Unit Carrying Case

Included accessories 50-53 are contained in the embroidery unit carrying case. To open the embroidery unit carrying case, raise each lock and move the latches out of position. To re-hook the latches and securely close the case, position the latch on the catch of the unit lid and lower the lock till it snaps.

a Storage space of the flat bed attachment b Presser foot storage space of the flat bed

attachment

c Presser foot storage trays

a Latches

Included Accessories

See table on the next page about included accessories.

Page 20

NAMES OF MACHINE PARTS AND THEIR FUNCTIONS

12345 67

8 9 101112131415

* 17* 18*

23 24 25 26 27 28 29 30

31 32 33 34 35 36 37

38 39 40 41 42 43 44 45

75/11 2 needles 90/14 2 needles 90/14 2 needles: Ball point needle (gold colored)

2.0/11 needle2175/11 2needles

46 47 48 49

54 55 56 57 58 59 60

** 51** 52** 53**

*See Instruction and Reference Guide Addendum for presser feet instructions. **Included Accessories 50-53 are contained in the embroidery unit carrying case.

Page 21

NAMES OF MACHINE PARTS AND THEIR FUNCTIONS

Memo

61 62 63 64 65 66 67 68

No. Part Name Part Code

1 Zigzag foot “J” (on machine) XC3021-051

2 Monogramming foot “N” X53840-351

3 Overcasting foot “G” XC3098-051

4 Zipper foot “I” X59370-051

5 Buttonhole foot “A” X57789-251

6 Blind stitch foot “R” X56409-051

7 Button fitting foot “M” 130489-001

8 Walking foot X81064-104

9 Side cutter foot XC3198-101

10 Straight stitch foot XD0826-051

11 Free motion quilting foot “C” XE0765-101

12 Free motion echo quilting foot “E” XE0766-001

13 Free motion open toe quilting foot

“O”

14 Embroidery foot “W2” with LED

pointer

15 Vertical stitch alignment foot “V” XE0005-001

16 Blind stitch foot (with guide)

17 Narrow hemmer foot

18 Cording foot (3 cord guide)

19 Needle set XE4962-001

20 Twin needle XE4963-001

21 Ball point needle set XD0705-051

22 Bobbin × 10

(One is on machine.)

23 Seam ripper XF4967-001

24 Scissors XC1807-121

25 Cleaning brush X59476-051

26 Eyelet punch XZ5051-001

27 Screwdriver (small) X55468-051

28 Screwdriver (large) XC4237-021

29 Disc-shaped screwdriver XC1074-051

30 Spool cap (small) 130013-154

31 Spool cap (medium) × 2

(One is on machine.)

32 Spool cap (large) 130012-054

33 Spool cap (mini insert) XA5752-121

34 Spool stand See page 21

35 Spool felt (on machine) X57045-051

36 Spool net × 2 XA5523-050

37 Embroidery needle plate cover XE5131-001

38 Touch pen (stylus) XA9940-051

39 Knee lifter XE4713-001

40 USB cable XD0745-051

41 Standard bobbin case (green

marking on the screw) (on machine)

42 Alternate bobbin case

(no color on the screw)

* XA0059-001

* 184600-001

* XA6871-001

XE0767-001

XF6319-001

X52800-150

X55260-153

XE5342-101

XC8167-551

No. Part Name Part Code

43 Bobbin case

(gray, for bobbin work)

44 Straight stitch needle plate XE4908-301

45 Cord guide bobbin cover

(with single hole)

46 Bobbin cover (with mark)

(on machine)

47 Bobbin cover XE8992-101

48 Bobbin center pin and instruction

sheet

49 Multi-function foot controller See Instruction and

50 Embroidery frame set (small)

H 2 cm × W 6 cm (H 1 inch × W 2-1/2 inches)

51 Embroidery frame set (medium) H

10 cm × W 10 cm (H 4 inches × W 4 inches)

52 Embroidery frame set (quilt) H 20

cm × W 20 cm (H 8 inches × W 8 inches)

53 Embroidery frame set

(extra large) H 30 cm × W 20 cm (H 12 inches × W 8 inches)

54 Embroidery bobbin thread BBT-W

55 Embroidery positioning sticker

sheets

56 Edge sewing sheet × 6 XE5500-001

57 Stabilizer material X81176-001

58 Chalk pencil XE8568-001

59 USB mouse XE4904-101

60 Pen tablet See page 23

61 LCD cleaning cloth XE5023-101

62 Soft cover XE5112-101

63 Embroidery unit carrying case XE3803-101

64 Accessory case XF7278-001

65 Power cord XC6052-051

66 Instruction and reference guide XF6312-001

67 Quick reference guide XF6313-001

68 Instruction and Reference Guide

Addendum

69 On Screen Designer™ CD XF6584-001

XE8298-001

XE8991-101

XF0750-101

XF5048-001

Reference Guide

Addendum

EF73:Frame

EF77:Embroidery sheet

EF74:Frame

EF78:Embroidery sheet

EF91:Frame

EF93:Embroidery sheet

EF92:Frame

EF94:Embroidery sheet

XE4912-501

XF6314-001

* See Instruction and Reference Guide Addendum for presser feet

instructions.

• Foot controller: Model V

This foot controller can be used on the machine model:BLSOG2.

Page 22

NAMES OF MACHINE PARTS AND THEIR FUNCTIONS

Memo

Note

• Always use accessories recommended for this machine.

• The screw for the presser foot holder is available through your authorized retailer (Part code XA4813-051).

• Included accessories 40, 49, 66, 67 and 68 can be stored in the machine’s soft cover case.

Options

The following are available as optional accessories to be purchased separately.

123

456

789

13 14 15

No. Part Name Part Code

1 Border embroidery frame

H 18 cm × W 10 cm (H 7 inches × W 4 inches)

2 10 spool stand BLSO-TS

3 Embroidery frame set (large)

H 18 cm × W 13 cm (H 7 inches × W 5 inches)

4 Embroidery card reader BLECR

5 Extension Table and free

motion grip

6 Embroidery bobbin thread

(white)

Embroidery bobbin thread (black)

7 Seam guide BLG-SG

8 1/4 inch piecing foot with

guide

9 Edge sewing sheet × 5 BLSO-ESS

10 Embroidery positioning

sticker sheets

11 Border embroidery frame

(large) H 30 cm × W 10 cm (H 12 inches × W 4 inches) with Kit 3 upgrade

12 Embroidery frame set (extra

large) H 26 cm × W 16 cm (H 101/4 inches × W 6-1/4 inches)

13 Embroidery shield BLSO-ES

14 Square embroidery frame

H 150 × W 150 mm (H 6 inches × W 6 inches)

15 Embroidery foot “W” XC8156-651

16 Circular attachment BL-CSA

BLSO-BF

EF75:Frame

EF79:Embroidery sheet

BLSO-ET

BBT-W

BBT-B

ESG-QGF

BLSO-EPS

BLSO-BF2

EF81:Frame

EF86:Embroidery sheet

BLMA-150

10 11 12

• All specifications are correct at the time of printing. Please be aware that some specifications may change without notice.

• Embroidery cards purchased in foreign countries may not work with your machine.

• Visit your nearest authorized retailer for a complete listing of optional accessories.

Page 23

Using the Spool Stand

CAUTION

Note

The included spool stand is useful when using thread spools with a large diameter (cross-wound thread). The spool stand can hold two spools of thread.

123

456

NAMES OF MACHINE PARTS AND THEIR FUNCTIONS

■ How to assemble the spool stand

Fully extend the telescopic thread guide

shaft, and then rotate the shaft until the two internal stoppers click into place.

Insert the telescopic thread guide into the

round hole at the center of the spool support, and then use a screwdriver to securely tighten the screw (a) from the reverse side.

789

No. Part Name Part Code

1 Telescopic thread guide XE0776-001

2 Spool support XE4958-101

3 Spool pin × 2 XA6313-051

4 Screw and washer XC7568-051

5 Spool cap (XL) × 2 XE0779-001

6 Spool holder × 2 XA0679-050

7 Spool cap base × 2 XE0780-001

8 Spool felt × 2 XC7134-051

9 Ring × 4 026030-136

• Do not lift the handle of the machine while the spool stand is installed.

• Do not push or pull the telescopic thread guide or spool pins with extreme force, otherwise damage may result.

• Do not place any object other than spools of thread on the spool support.

• Do not try to wind thread on the bobbin while sewing using the spool stand.

a Screw

• Make sure that the stoppers on the telescopic thread guide shaft are firmly in place and that the top of the thread guide is directly above the spool pins. In addition, check that the shaft is securely tightened in the spool support.

Page 24

NAMES OF MACHINE PARTS AND THEIR FUNCTIONS

Memo

Firmly insert the two spool pins into the two

holes in the spool support.

Open the upper cover of the machine. From

the back of the machine, press in the upper cover latches (one on each side), and then pull the upper cover up to remove it from the machine.

■ How to remove

From the back of the machine, press in the

spool stand latches (one on each side), and then pull the spool stand up to remove it from the machine.

Attach the upper cover to the machine.

Insert the spool stand onto the notches of

the machine.

• See page 52 about the bobbin winding using the spool stand.

• See page 63 about the upper threading using the spool stand.

Page 25

Using the Pen Tablet

Memo

WARNING

CAUTION

Note

• See page 34 about connecting the pen tablet with the sewing machine.

123

NAMES OF MACHINE PARTS AND THEIR FUNCTIONS

Unscrew the upper barrel of the tablet pen.

• Unscrew the upper barrel slowly, so that the tablet pen will not be damaged.

No. Part Name Part Code

1 Pen tablet XF0248-001

2 Tablet pen XF2797-001

3 Tablet pen holder XF0185-001

4 Extra pen tips (4) XF0183-001

5 Pen tip clip XF0184-001

■ Installing a battery in the tablet pen

A battery for the tablet pen is not included with your machine. Use a new AAA alkaline battery (LR03).

• Do not disassemble or modify the tablet pen/ battery.

• Do not use metallic objects, such as tweezers or a metallic pen, when changing the battery.

• Do not throw the battery into fire or expose to heat.

• Remove battery immediately and stop using the machine if you notice abnormal odor, heat, discoloration, deformation or anything unusual while using or storing it.

Install a new AAA alkaline battery (LR03) in

the tablet pen with the positive end (+) pointing up.

Screw the upper barrel to the tablet pen.

■ Replacing the pen tip

When the pen tip is worn out, replace with a new one included with your pen tablet.

• Remove the battery if you do not intend to use tablet pen for an extended period of time.

• Do not set the positive and negative ends of the battery in the wrong direction.

Grasp the old pen tip firmly with the

included pen tip clip.

Page 26

NAMES OF MACHINE PARTS AND THEIR FUNCTIONS

Note

Gently pull the pen tip straight out.

Push in the new pen tip until it is flush with

the tablet pen.

■ Using with On Screen Designer™

Select a favorite picture for creating

embroidery pattern.

Activate On Screen Designer™, then trace

the picture with the tablet pen.

For detailed instructions about operating On Screen Designer™, refer to the Instruction and Reference Guide (PDF format) stored on the On Screen Designer™ CD.

• When you create the embroidery pattern by tracing the picture using the pen tablet, the actual size of the pattern will be bigger than the tracing picture. Check the size of the pattern before embroidering, then change the size of the pattern if needed.

• The pen tablet cannot be used as the USB mouse while tracing the picture. Operate with your finger or touch pen (stylus) while tracing.

Insert the picture under the tablet sheet.

Page 27

Chapter 1

Getting Ready

TURNING THE MACHINE ON/OFF...............26

LCD SCREEN...................................................28

■ Home Page Screen ................................................................... 28

■ Utility Stitch LCD Screen ......................................................... 29

■ Key Functions ........................................................................... 30

USB Connectivity.............................................................. 32

■ Using USB Media or Embroidery Card Reader/

USB Card Writer Module*........................................................ 32

■ Connecting the Machine to the Computer ............................... 33

■ Using a USB Mouse ..................................................................33

■ Clicking a Key ..........................................................................33

■ Changing Pages ........................................................................ 33

■ Using the Pen Tablet ................................................................34

Using the Machine Setting Mode Key ............................... 35

■ Saving a Settings Screen Image to USB Media.......................... 39

■ Changing the Pointer Shape When a USB Mouse Is Used ........39

■ Changing the Screen Saver Image ............................................40

■ Selecting the Initial Screen Display ..........................................41

■ Choosing the Display Language................................................ 41

■ Changing the Background Colors

of the Embroidery Patterns.......................................................42

■ Specifying the Size of Pattern Thumbnails................................43

Using the Sewing Machine Help Key ................................ 44

Using the Operation Guide Function................................ 45

Using the Sewing Guide Function..................................... 46

Using the Pattern Explanation Function ............................ 47

LOWER THREADING .....................................48

Winding the Bobbin .......................................................... 48

■ Using the Supplemental Spool Pin............................................48

■ Using the Spool Pin ..................................................................51

■ Using the Spool Stand ..............................................................52

■ Untangling Thread from Beneath the Bobbin Winder Seat....... 53

Setting the Bobbin ............................................................ 54

Pulling Up the Bobbin Thread........................................... 55

UPPER THREADING.......................................57

Upper Threading............................................................... 57

Using the Twin Needle Mode ........................................... 60

Using the Spool Stand ....................................................... 63

■ Using the Spool Stand ..............................................................63

Using Threads that Unwind Quickly ................................. 64

■ Using the Spool Net .................................................................64

CHANGING THE PRESSER FOOT ..................65

Removing the Presser Foot................................................ 65

Attaching the Presser Foot ................................................ 65

Attaching the Walking Foot .............................................. 66

CHANGING THE NEEDLE..............................67

About the Needle.............................................................. 69

Fabric/Thread/Needle Combinations................................ 69

Page 28

TURNING THE MACHINE ON/OFF

WARNING

CAUTION

TURNING THE MACHINE ON/OFF

• Use only regular household electricity for the power source. Using other power sources may result in fire, electric shock, or damage to the machine.

• Make sure that the plugs on the power cord are firmly inserted into the electrical outlet and the power cord receptacle on the machine.

• Do not insert the plug on the power cord into an electrical outlet that is in poor condition.

• Turn the main power to OFF and remove the plug in the following circumstances: When you are away from the machine After using the machine When the power fails during use When the machine does not operate correctly due to a bad connection or a disconnection During electrical storms

• Use only the power cord included with this machine.

• Do not use extension cords or multi-plug adapters with many other appliances plugged in to them. Fire or electric shock may result.

• Do not touch the plug with wet hands. Electric shock may result.

• When unplugging the machine, always turn the main power to OFF first. Always grasp the plug to remove it from the outlet. Pulling on the cord may damage the cord, or lead to fire or electric shock.

• Do not allow the power cord to be cut, damaged, modified, forcefully bent, pulled, twisted, or bundled. Do not place heavy objects on the cord. Do not subject the cord to heat. These things may damage the cord, or cause fire or electric shock. If the cord or plug is damaged, take the machine to your authorized retailer for repairs before continuing use.

• Unplug the power cord if the machine is not to be used for a long period of time. Otherwise, a fire may result.

• When leaving the machine unattended, either the main switch of the machine should be turned to OFF or the plug must be removed from the socket-outlet.

• When servicing the machine or when removing covers, the machine must be unplugged.

• For U.S.A only This appliance has a polarized plug (one blade wider than the other). To reduce the risk of electrical shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the plug in any way.

Page 29

Insert the power supply cord into the power

Memo

cord receptacle, then insert the plug into a wall outlet.

a Main power switch b Power supply cord

Turn the main power switch to “I” to turn

on the machine.

TURNING THE MACHINE ON/OFF

Getting Ready

a OFF b ON

• When the machine is turned on, the needle and the feed dogs will make sound when they move; this is not a malfunction.

Turn the main power switch to “O” to turn

off the machine.

Page 30

LCD SCREEN

Note

Memo

LCD SCREEN

When the machine is turned on, the opening movie is played. Touch anywhere on the screen for the home page screen to be displayed. Touch the LCD screen or a key with your finger or the included touch pen to select a machine function.

• When the straight stitch needle plate is on the machine, the needle will automatically move to the middle position.

• Only touch the screen with your finger or the included touch pen. Do not use a sharp pencil, screwdriver, or other hard or sharp object. It is not necessary to press hard on the screen. Pressing too hard or using a sharp object may damage the screen.

■ Home Page Screen

No. Display Key Name Explanation Page

a Sewing key Press this key to sew utility stitches or character or decorative stitch

b Embroidery key Attach the embroidery unit and press this key to embroider patterns. 186

c Embroidery Edit key Press this key to combine embroidery patterns. With the embroidery

patterns.

edit functions, you can also create original embroidery patterns or frame patterns.

See the “Key

Functions” table.

264

Page 31

LCD SCREEN

a b

■ Utility Stitch LCD Screen

Press a key with your finger to select the stitch pattern, to select a machine function, or to select an operation indicated on the key.

Getting Ready

a Shows single or twin needle mode setting, and the needle stop position.

Single needle/down position Single needle/up position

Twin needle/down position Twin needle/up position

b Shows the name and code number of the selected stitch. c Shows the presser foot code. Attach the presser foot indicated in this display before sewing. d Shows a preview of the selected stitch.

When shown at 100%, the stitch appears in the screen at nearly its actual size.

e Shows the stitch patterns. f Shows additional pages that can be displayed (Illustration shows page 1 of 2.).

* All key functions of the LCD are explained in the “Key Functions” table on the following page.

Page 32

LCD SCREEN

b e

mno

cxd

■ Key Functions

No. Display Key Name Explanation Page

a Utility stitch key Press this key to select a straight stitch, zigzag stitch, buttonhole, blind hem

b Character/Decorative

c Screen lock key Press this key to lock the screen.When the screen is locked, the various

d Image key Press this key to display an enlarged image of the selected stitch pattern. 92

e Home page screen

f Stitch selection

g Edge sewing key Using the built-in camera, press this key to measure the width of the area from

h Needle mode

i Retrieve key Press this key to retrieve a saved pattern. 93

j Manual memory key Change the stitch pattern settings (zigzag width and stitch length, thread

stitch key

key

display

selection key (single/ double)

stitch, or other stitches commonly used in garment construction.

Press this key to select character or decorative stitch patterns. 156

settings, such as the stitch width and stitch length, are locked and cannot be changed. Press this key again to unlock the settings.

Press this key anytime it is displayed to return to the home page screen and select a different category - “Utility and Decorative Stitches”, “Embroidery” or “Embroidery edit”.

Press the key for the pattern you want to sew. Use

to change to different stitch groups.

the edge of the fabric to the stitch and set the camera for edge sewing.

Press this key to select twin needle sewing mode. The sewing mode changes between single needle mode and twin needle mode each time you press the key. If the key display is light gray, the selected stitch pattern cannot be sewn in the twin needle mode.

tension, automatic thread cutting or automatic reinforcement stitching, etc.), then save them by pressing this key. Five sets of settings can be saved for a single stitch pattern.

148

Page 33

LCD SCREEN

No. Display Key Name Explanation Page

k Reset key Press this key to return the selected stitch pattern saved settings to the default

l Presser foot/Needle

exchange key

m Sewing machine help

key

n Camera view key Touch this key to check the needle location as it is shown on the screen through

o Machine setting mode

key

p Stitch width and stitch

length key

settings.

Press this key before changing the needle, the presser foot, etc. This key locks all key and button functions to prevent operation of the machine.

Press this key to see explanations on how to use the machine. 44

the built in camera.

Press this key to change the needle stop position, change the volume of operation beep, adjust the pattern or screen, and change other machine settings.

Shows the zigzag width and stitch length settings of the currently selected stitch pattern. You can use the plus and minus keys to adjust the zigzag width and stitch length settings.

78-79

65-68

Getting Ready

q Thread tension key Shows the automatic thread tension setting of the currently selected stitch

pattern. You can use the plus and minus keys to change the thread tension settings.

r Mirror image key Press this key to create a mirror image of the selected stitch pattern. If the key

s Automatic thread

cutting key

t Automatic

reinforcement stitch key

u Free motion mode key Press this key to enter free motion sewing mode.

v Pivot key Press this key to select the pivot setting. When the pivot setting is selected,

w Pattern display size Shows the approximate size of the pattern selected.

x Scroll key

display is light gray, a mirror image of the selected stitch pattern cannot be sewn.

Press this key to set the automatic thread cutting function. Set the automatic thread cutting function before sewing to have the machine automatically sew reinforcement stitches at the beginning and end of sewing (depending on the pattern, the machine may sew reverse stitches) and trim the threads after sewing.

Press this key to use the automatic reinforcement stitching (reverse stitching) setting. If you select this setting before sewing, the machine will automatically sew reinforcement stitches at the beginning and end of sewing (depending on the pattern, the machine may sew reverse stitches).

The presser foot is raised to an appropriate height and the feed dog is lowered for free motion quilting.

stopping the machine lowers the needle and slightly raises the presser foot automatically. In addition, when sewing is restarted, the presser foot is automatically lowered.

• If this key appears as , the pivot function cannot be used.

• Be sure the needle position on page 36 of Machine Settings is set to the down position.

: Nearly the same size as the sewn pattern

: 1/2 the size of the sewn pattern

: 1/4 the size of the sewn pattern

* The actual size of the sewn pattern may differ depending on the type of

fabric and thread that is used.

Press or , to move one page at a time, or touch anywhere on the bar

to jump ahead for additional pages of stitches.

116

Page 34

LCD SCREEN

Note

Memo

USB Connectivity

You can perform many functions using the USB ports on the machine. Connect the appropriate devices according to the feature of each ports.

a Primary (top) USB port for media or card Reader/

USB card writer module* (USB2.0)

* If you have purchased the Palette Ver5 or higher,

Palette Petite or Palette PTS, you can plug the included USB card writer module into the machine as an embroidery card reader, and recall patterns.

b USB port for mouse (USB1.1) c USB port for computer

• The processing speed may vary by port selection and quantity of data.

• Do not insert anything other than USB media into the USB media port. Otherwise, the USB media drive may be damaged.

■ Using USB Media or Embroidery Card Reader/USB Card Writer Module*

When sending or reading patterns using the USB media or the embroidery card Reader/USB card writer module*, connect the device to the primary (top) USB port. The primary (top) USB port processes the data faster than the other ports.

* If you have purchased the Palette Ver5 or higher,

Palette Petite or Palette PTS, you can plug the included USB card writer module into the machine as an embroidery card reader, and recall patterns.

a Primary (top) USB port b Embroidery card Reader/USB card writer module*

• Two USB media cannot be used with this machine at the same time. If two USB media are inserted, only the USB media inserted first is detected.

• Use only an embroidery card reader designed for this machine. Using an unauthorized embroidery card reader may cause your machine to operate incorrectly.

• Embroidery patterns cannot be saved from the machine to an embroidery card inserted into a connected USB card writer module.

• USB media is widely used, however some USB media may not be usable with this machine. Please visit our website for more details.

• Depending on the type of USB media being used, either directly plug the USB device into the machine’s USB port or plug the USB media Reader/Writer into the machine’s USB port.

• You can plug the optional embroidery card Reader/USB card writer module* into the primary (top) or center port, when the mouse or the pen tablet is not connected.

• You can plug a USB media into the center port, but the primary (top) USB port processes the data faster. It is recommended to use the primary (top) USB port.

a Primary (top) USB port b USB media

Page 35

■ Connecting the Machine to the

Note

Memo

Computer

Using the included USB cable, the sewing machine can be connected to your computer.

a USB port for computer b USB cable connector

LCD SCREEN

• Do not perform operations with the mouse at the same time that you are touching the screen with your finger or the included touch pen.

• A USB mouse can be connected or disconnected at any time.

• Only the left mouse button and its wheel can be used to perform operations. No other buttons can be used.

• The mouse pointer does not appear in the camera view window, the screen saver or the home page screen.

■ Clicking a Key

When the mouse is connected, the pointer appears on the screen. Move the mouse to position the pointer over the desired key, and then click the left mouse button.

• Double-clicking has no effect.

Getting Ready

• The connectors on the USB cable can only be inserted into a port in one direction. If it is difficult to insert the connector, do not insert it with force. Check the orientation of the connector.

• For details on the position of the USB port on the computer (or USB hub), refer to the instruction manual for the corresponding equipment.

■ Using a USB Mouse

The USB mouse, connected to the sewing machine, can be used to perform a variety of operations in the screens.

Connect a USB mouse to the USB 1.1 port marked

with . You can also connect a USB mouse to

the other USB port (USB 2.0).

a Pointer

■ Changing Pages

Rotate the mouse wheel to switch through the tabs of the pattern selection screens.

• If page numbers and a vertical scroll bar for additional pages are displayed, rotate the mouse wheel or click the left mouse button

with the pointer on / or display the previous or next page.

/ to

a USB port for mouse b USB mouse

Page 36

LCD SCREEN

Note

Memo

■ Using the Pen Tablet

The included pen tablet, connected to the sewing machine, can be used when creating your original embroidery pattern with On Screen Designer™. Also, you can use the pen tablet as a USB mouse when operating your sewing machine. Connect the

pen tablet to the USB 1.1 port marked with . You

can also connect the pen tablet to the other USB port (USB 2.0) when not using the On Screen Designer™ program.

• Working area of the pen tablet differs depending on performing functions of the sewing machine.

a Working area for normal machine operation b Working area when drawing with the pen tablet

using the On Screen Designer™ program

a USB port for mouse b Pen tablet

After connecting the pen tablet to the sewing machine, it is activated when the pointer appears on the screen. The blue LED light on the tablet is the main indicator for hardware operation. The LED normally stays off, and will turn on when you touch the surface of the pen tablet with the tablet pen.

a Working area of the pen tablet b Blue LED light

• The pen tablet can be connected or disconnected at any time.

• Do not perform any operations with the pen tablet at the same time that you are touching the machine’s LCD screen with your finger or the included touch pen (stylus).

Page 37

LCD SCREEN

Memo

Using the Machine Setting Mode Key

Press to change the default machine settings (needle stop position, embroidery speed, opening

display, etc.). To display the different settings screens, press for “Sewing settings”, for

“General settings” or for “Embroidery settings”.

• Press or to display a different settings screen.

Sewing settings

* Refer to Instruction and Reference Guide Addendum, for the detailed instruction of the multi-function foot controller

setting.

Getting Ready

a Select whether to use the sewing speed controller to determine the zigzag width (see page 115). b Make adjustments to character or decorative stitch patterns (see page 162). c Adjust the presser foot height. (Select the height of the presser foot when the presser foot is raised.) d Adjust the presser foot pressure. (The higher the number, the greater the pressure will be. Set the pressure at “3” for

normal sewing.)

e Select whether “1-01 Straight stitch (Left)” or “1-03 Straight stitch (Middle)” is the utility stitch that is automatically

selected when the machine is turned on.

f Change the height of the presser foot when sewing is stopped when the pivot setting is selected (see page 84).

Adjust the presser foot to one of the three heights (3.2 mm, 5.0 mm and 7.5 mm).

g Change the height of the presser foot when the machine is set to free motion sewing mode (see page 116). h When set to “ON”, the thickness of the fabric is automatically detected by an internal sensor while sewing. This

enables the fabric to be fed smoothly (see pages 76 and 85).

i Press to save a settings screen image to USB media (see page 39).

Page 38

LCD SCREEN

CAUTION

General settings

• If “Upper and Bobbin Thread Sensor” is set to “OFF”, remove the upper thread. If the machine is used with the upper thread threaded, the machine will not be able to detect if the thread has become tangled. Continuing to use the machine with tangled thread may cause damage.

a Select the needle stop position (the needle position when the machine is not operating) to be up or down. Select the

down position when using the pivot key.

b Select the operation of the “Needle Position - Stitch Placement” button from the following two sequences (see page

86). Each press of the “Needle Position - Stitch Placement” button: “ON” – raises the needle, stops it at a nearly lowered position, then lowers it “OFF” – raises the needle, then lowers it

c Change the brightness of the Needle Area and Work Area Lights. d Change the speaker volume. e Change the shape of the pointer when a USB mouse is used (see page 39). f Turn both the upper and bobbin thread sensor “ON” or “OFF”. If it is turned “OFF”, the machine can be used without

thread.

g Select the length of time until the screen saver appears. A setting between “OFF” (0) and “60” minutes can be set in

1-minute increments.

h Change the image of the screen saver (see page 40). i Select the initial screen that is displayed when the machine is turned on (see page 41). j Press “ON” when using the embroidery data creation software On Screen Designer™. Refer to the instruction

manual (PDF format) stored in the On Screen Designer™ CD included in this machine.

k Change the display language (see page 41). l Change the screen display brightness (see page 330).

Page 39

LCD SCREEN

Memo

m Use to certify your sewing machine when you

purchase one of the upgrade kits.

n Display the total number of stitches sewn on this

machine, which is a reminder to take your machine in for regular servicing. (Contact your authorized retailer for details.)

o The “No.” is the internal machine number for the

embroidery and sewing machine.

p Display the program version. “Version 1” shows the

program version of the LCD panel, “Version 2” shows the program version of the machine.

q Press to save a settings screen image to USB

media (see page 39).

Getting Ready

• The latest version of software is installed in your machine. Check with your local authorized Baby Lock retailer or at “ www.babylock.com ” for available updates (see page 351).

Embroidery settings

* Refer to Instruction and Reference Guide Addendum, for the detailed instruction of the embroidery foot “W2” setting.

a Select from among 14 embroidery frame displays

(see page 238).

b Change the thread color display on the embroidery

screen; thread number, color name (see page

237).

c When the thread number “#123” is selected, select

from six thread brands (see page 237).

d Adjust the maximum embroidery speed setting

(see page 237).

e Adjust the upper thread tension for embroidering

(see page 233).

f Select the height of the embroidery foot during

embroidering (see page 200).

Page 40

LCD SCREEN

g Change the display units (mm/inch). h Change the initial mode of the display (embroidery/embroidery edit). i Change the color of the background for the embroidery display area (see page 42). j Change the color of the background for the thumbnail area (see page 42). k Adjust the distance between the pattern and the basting stitching (see page 298). l Adjust the distance between the appliqué pattern and the outline (see page 299). m Use to display the fabric while aligning the embroidery position (see page 211). n Press to specify the size of pattern thumbnails (see page 43). o Press to save a settings screen image to USB media (see page 39).

Page 41

LCD SCREEN

Note

Memo

■ Saving a Settings Screen Image to USB Media

An image of the settings screen can be saved as a BMP file. A maximum of 100 images can be saved on a single USB media at one time.

Insert the USB media into the primary (top)

USB port on the right side of the machine.

a Primary (top) USB port b USB media

■ Changing the Pointer Shape When a USB Mouse Is Used

In the settings screen, the shape can be selected for the pointer that appears when a USB mouse is connected. Depending upon the background color, select the desired shape from the three that are available.

• For details on changing the background color, refer to “Changing the Background Colors of the Embroidery Patterns” on page

42.

Press .

→ The Sewing settings screen appears.

Press .

→ The General settings screen appears.

Display 3/8 (page 3 of 8) of the General

settings screen.

Getting Ready

Press .

→ The Sewing settings screen appears. Select the

settings screen page that you want to save the screen image of.

Press .

→ The image file will be saved to the USB media.

Remove the USB media, and then check the

saved image using a computer.

The files for Settings screen images are saved with the name “S**.BMP”.

* “**” in the name “S**.BMP” will automatically be

replaced with a number between 00 and 99.

• If 100 image files have already been saved on the USB media, the following message appears. In this case, delete a file from the USB media or use different USB media.

Use and to choose the pointer

shape from the three settings available

(, and ).

Press to return to the original screen.

• The setting remains selected even if the machine is turned off.

Page 42

LCD SCREEN

Note

■ Changing the Screen Saver Image

Instead of the default image, you can select your own personal images for the screen saver of your machine. Before changing the screen saver image, prepare the image on your computer or USB media.

Compatible image files

Format

File size

File dimension

Number allowed

• When using USB media, make sure that it contains only your own personal images to be selected for the screen saver.

• Folders are recognized. Open the folder that holds your personal images.

Press .

→ The Sewing settings screen appears.

JPEG format (.jpg)

Max. 150 KB for each image

480 × 800 pixels or less, (If the width is more than 480 pixels, the image imported will be reduced to a width of 480 pixels.)

5 or less

Connect the USB media or the computer

(using a USB cable) that contains your personal image to the USB port of the machine.

* See page 32 about USB connectivity.

Press to select the first image.

* The images will appear in a list in this screen. Select

the desired number to specify the image.

Select the device that is connected.

Press .

→ The General settings screen appears.

Display 4/8 (page 4 of 8) of the General

settings screen.

Press .

* Press when connecting USB media to the

primary (top) USB port.

* Press when connecting USB media to the

center USB port.

* Press when connecting a computer using a

USB cable, and then copy your personal images into “Removable Disk”, which appears on the desktop of the computer.

→ A list of your personal images appear on the screen.

Page 43

LCD SCREEN

* Press to delete the selected image.

* Press to view the previous page.

Press a file name to select image and then

press .

Use and to select the setting for the

initial screen display.

* Opening Screen: When the machine is turned on,

the home page screen appears after the opening movie screen is touched.

* Home Page: When the machine is turned on, the

home page screen appears.

* Sewing/Embroidery Screen: When the machine is

turned on, the Embroidery screen appears if the embroidery unit is attached to the machine, or the sewing screen appears if the embroidery unit is not attached to the machine.

Getting Ready

→ The selected image is stored on your machine.

* Press to view the previous page.

Repeat the procedure from step g to select

the remaining images.

Press to return to the original screen.

■ Selecting the Initial Screen Display

The Initial screen that appears on the machine can be changed.

Press .

→ The Sewing settings screen appears.

Press to return to the original screen.

■ Choosing the Display Language

Press .

→ The Sewing settings screen appears.

Press .

→ The General settings screen appears.

Display 4/8 (page 4 of 8) of the General

settings screen.

Use and to choose the display

language.

Press .

→ The General settings screen appears.

Display 4/8 (page 4 of 8) of the General

settings screen.

a Display language

Page 44

LCD SCREEN

Memo

aba

Press to return to the original screen.

■ Changing the Background Colors of the Embroidery Patterns

In the settings screen, the background colors can be changed for the embroidery pattern and pattern thumbnails. Depending on the pattern color, select the desired background color from the 66 settings available. Different background colors can be selected for the embroidery pattern and pattern thumbnails.

Press .

→ The Sewing settings screen appears.

Press .

→ The Embroidery settings screen appears.

• When using the Embroidery or Embroidery Edit, touch to directly access the

Embroidery settings screen.

Display 7/8 (page 7 of 8) of the Embroidery

settings screen.

Select the background color from the 66

settings available.

a Embroidery pattern background b Selected color

Press .

a Embroidery pattern background b Pattern thumbnails background

a Pattern thumbnails background b Selected color

Press to return to the original screen.

• The setting remains selected even if the machine is turned off.

Page 45

LCD SCREEN

Note

■ Specifying the Size of Pattern Thumbnails

The thumbnails for selecting an embroidery pattern can be set to be displayed at the normal size or a larger size. The larger size is 1.5 times the normal size.

Press or to select the desired

thumbnail size.

Getting Ready

Press .

→ The Sewing settings screen appears.

Press .

→ The Embroidery settings screen appears.

Display 8/8 (page 8 of 8) of the Embroidery

settings screen.

• When thumbnail size setting has been changed the pattern selection screen will not immediately reflect the chosen size. To view the patterns with the new thumbnail size, return to the category selection screen, and then select the pattern category again.

Page 46

LCD SCREEN

Using the Sewing Machine Help Key

Press to open the sewing machine help screen. Three functions are available from the screen shown below.

a Press this key to see explanation for upper threading, winding the bobbin, changing the presser foot, preparing to

embroider a pattern, and how to use the machine (see page 47).

b Press this key to select utility stitches when you are not sure which stitch to use or how to sew the stitch (see page

45).

c Press this key to see an explanation of the stitch selected (see page 46).

Page 47

Using the Operation Guide Function

LCD SCREEN

Press to open the screen shown below. Six categories are displayed at the top of the screen.

Press a key to see more information about that category.

displays information about

the main parts of the machine and their functions. This is the first screen displayed

when you press .

the operation buttons.

displays information about

threading the machine, changing presser feet, etc. Some of the functions are described in the movies. Watch these movies for a better understanding of the functions.

Getting Ready

displays information about

attaching the embroidery unit, preparing fabric for embroidering, etc. Some of the functions are described in the movies. Watch these movies for a better understanding of the functions.

information.

displays troubleshooting

displays information about

cleaning the machine, etc. Some of the functions are described in the movies. Watch these movies for a better understanding of the functions.

Page 48

LCD SCREEN

Example: Displaying information about

upper threading

Using the Sewing Guide Function

Press .

→ The lower half of the screen will change.

Press (upper threading).

The sewing guide function can be used to select patterns from the Utility Stitch screen. Use this function when you are not sure which stitch to use for your application, or to get advice about sewing particular stitches. For example, if you want to sew overcasting, but you do not know which stitch to use or how to sew the stitch, you can use this screen to get advice. We recommend that beginners use this method to select stitches.

Enter Utility Stitch category from the home

page.

Press .

→ The advice screen is displayed.

→ The screen shows instructions for threading the

machine.

Read the instructions.

* Press to see a video of the displayed

instructions.

Press under movie to go back to the

beginning. Press to pause. Press to

restart after pause. Press to close out the

movie.

* Press to view the next page.

* Press to view the previous page.

Press to return to the original screen.

Page 49

LCD SCREEN

Note

Memo

Press the key of the category whose sewing

instructions you wish to view.

* Press to return to the original screen.

Press .

Getting Ready

Read the explanations and select the

appropriate stitch.

→ The screen displays directions for sewing the

selected stitch. Follow the directions to sew the stitch.

Using the Pattern Explanation Function

If you want to know more about the uses of a stitch pattern, select the pattern and press and

then to see an explanation of the

stitch selection.

• With the pattern explanation function, descriptions can be displayed for the patterns available on the Utility Stitch and Character/Decorative Stitch screens.

• Descriptions are displayed for each pattern in the Utility Stitch screen. Description for the Character/Decorative Stitch category is also displayed.

Press .

→ The screen shows information.

• If the key appears in gray, the

pattern explanation function cannot be used.

Example: Displaying information about

Press to return to the original screen.

• The settings remain displayed to allow you to fine tune the stitch.

Page 50

LOWER THREADING

CAUTION

LOWER THREADING

Winding the Bobbin

Press → → →

→ in this order to display a

video example of bobbin winding on the LCD (see page 46). Follow the steps explained below to complete the operation.

• The included bobbin was designed specifically for this sewing machine. If bobbins from other models are used, the machine will not operate correctly. Use only the included bobbin or bobbins of the same type (part code: X52800-

150).

■ Using the Supplemental Spool Pin

With this machine, you can wind the bobbin during sewing. While using the main spool pin to sew embroidery, you can conveniently wind the bobbin using the supplemental spool pin.

* Actual size

a This model b Other models c 11.5 mm (approx. 7/16 inch)

a Supplemental spool pin

Turn the main power to ON and open the

top cover.

Align the groove in the bobbin with the

spring on the bobbin winder shaft, and set the bobbin on the shaft.

a Groove in the bobbin b Spring on the shaft

Page 51

LOWER THREADING

CAUTION

Memo

Set the supplemental spool pin in the “up”

position.

a Supplemental spool pin

Place the spool of thread on the

supplemental spool pin, so that thread unrolls from the front. Push the spool cap onto the spool pin as far as possible to secure the thread spool.

• If a spool of thread whose core is 12 mm (1/2 inch) in diameter and 75 mm (3 inches) high is inserted onto the spool pin, use the mini spool insert.

a Spool cap (mini insert) b 12 mm (1/2 inch) c 75 mm (3 inches)

With your right hand, hold the thread near

the thread spool. With your left hand, hold the end of the thread, and use both hands to pass the thread through the thread guide.

Getting Ready

a Spool cap b Spool pin c Thread spool

• If the thread spool and/or spool cap are set incorrectly, the thread may tangle on the spool pin and cause the needle to break.

• Use the spool cap (large, medium, or small) that is closest in size to the thread spool. If a spool cap smaller than the thread spool is used, the thread may become caught in the slit on the end of the spool and cause the needle to break.

• When sewing with fine, cross-wound thread,

use the small spool cap, and leave a small space between the cap and the thread spool.

a Thread guide

Pass the thread around the pre-tension disk

making sure that the thread is under the pre-tension disk.

a Pre-tension disk

→ Make sure that the thread passes under the pre-

tension disk.

a Spool cap (small) b Thread spool (cross-wound thread) c Space

b Pre-tension disk c Pull it in as far as possible.

→ Check to make sure thread is securely set between

pre-tension disks.

Page 52

LOWER THREADING

CAUTION

Memo

Note

Memo

Wind the thread clockwise around the

bobbin 5-6 times.

Pass the end of the thread through the guide

slit in the bobbin winder seat, and pull the thread to the right to cut the thread with the cutter.

Press .

→ Bobbin winding starts automatically. The bobbin

stops rotating when bobbin winding is completed. The bobbin winding switch will automatically return to its original position.

• changes to while the bobbin is winding.

• Stay near the machine while winding the bobbin to make sure the bobbin thread is being wound correctly. If the bobbin thread

is wound incorrectly, press immediately to stop the bobbin winding.

• The sound of winding the bobbin with stiff thread, such as nylon thread for quilting, may be different from the one produced when winding normal thread; however, this is not a sign of a malfunction.

a Guide slit (with built-in cutter) b Bobbin winder seat

• Be sure to follow the process described. If the thread is not cut with the cutter, and the bobbin is wound, when the thread runs low it may tangle around the bobbin and cause the needle to break.

Set the bobbin winding switch to the left,

until it clicks into place.

a Bobbin winding switch

• You can change the winding speed by

pressing (to decrease) or (to

increase) in the bobbin winding window.

• Press to minimize the bobbin winding window. Then, you can perform other

operations, such as selecting a stitch or adjusting the thread tension, while the bobbin is being wound.

• Press (in top right of the LCD screen)

to display the bobbin winding window again.

• Sliding the bobbin winding switch to the left switches the machine into bobbin winding mode.

→ The bobbin winding window appears.

Page 53

LOWER THREADING

Memo

CAUTION

Cut the thread with cutter and remove the

bobbin.

• When removing the bobbin, do not pull on the bobbin winder seat. Doing so could loosen or remove the bobbin winder seat, and could result in damage to the machine.

• Setting the bobbin improperly may cause the thread tension to loosen, breaking the needle and possibly resulting in injury.

Turn the main power to ON and open the

top cover.

Align the groove in the bobbin with the

spring on the bobbin winder shaft, and set the bobbin on the shaft.

a Groove in the bobbin b Spring on the shaft

Pivot the spool pin so that it angles upward.

Set the thread spool on the spool pin so that the thread unwinds from the front of the spool.

Getting Ready

■ Using the Spool Pin

You can use the main spool pin to wind the bobbin before sewing. You cannot use this spool pin to wind the bobbin while sewing.

a Spool pin b Spool cap c Thread spool d Spool felt

Push the spool cap onto the spool pin as far

as possible, then return the spool pin to its original position.

While holding the thread with both hands,

pull the thread up from under the thread guide plate.

a Thread guide plate

Page 54

LOWER THREADING

Memo

CAUTION

Pass the thread through the thread guide.

a Thread guide

Pass the thread around the pre-tension disk

making sure that the thread is under the pre-tension disk.

■ Using the Spool Stand

To wind thread on the bobbin while the spool stand is installed, pass the thread from the spool through the thread guide on the telescopic thread guide, and then wind the bobbin according to steps

k of “Using the Supplemental Spool Pin”on

page 49 to page 51.

e through

a Thread guide b Pre-tension disk

Follow steps g through k on page 50

through 51.

• See page 21 to assemble the spool stand.

• See page 63 to thread the machine using the spool stand.

• When winding thread on the bobbin, do not cross the bobbin winding thread with the upper thread in the thread guides.

Page 55

LOWER THREADING

CAUTION

Note

■ Untangling Thread from Beneath the Bobbin Winder Seat

If the bobbin winding starts when the thread is not passed through the pre-tension disk correctly, the thread may become tangled beneath the bobbin winder seat. Wind off the thread according to the following procedure.

a Thread b Bobbin winder seat

• Do not remove the bobbin winder seat even if the thread becomes tangled under the bobbin winder seat. It may result in injuries.

Cut the thread near the bobbin and hold the

thread end with your left hand. Unwind the thread clockwise near the bobbin winder seat with your right hand as shown below.

Wind the bobbin again.

Getting Ready

If the thread becomes tangled under the

bobbin winder seat, press once to stop the bobbin winding.

Cut the thread with scissors near the pre-

tension disk.

a Pre-tension disk

• Make sure that the thread passes through the pre-tension disk correctly (page 49).

Push the bobbin winder switch to the right,

and then raise the bobbin at least 10 cm (4 inches) from the shaft.

Page 56

LOWER THREADING

CAUTION

Setting the Bobbin

Press → → →

→ in this order to display a

video example of the operation on the LCD (see page 46). Follow the steps explained below to complete the operation.

• Use a bobbin thread that has been correctly wound. Otherwise, the needle may break or the thread tension will be incorrect.

Press to lock all keys and buttons.

Slide the bobbin cover latch to the right.

a Bobbin cover b Latch

→ The bobbin cover opens.

Remove the bobbin cover.

Hold the bobbin with your right hand and

hold the end of the thread with your left hand.

150).

* Actual size

a This model b Other models c 11.5 mm (approx. 7/16 inch)

• Before inserting or changing the bobbin, be sure to press in the LCD, otherwise

injuries may occur if the “Start/Stop” button or any other button is pressed and the machine starts sewing.

Set the bobbin in the bobbin case so that

the thread unwinds to the left.

Hold the bobbin lightly with your right

hand, and then guide the thread with your left hand.

Page 57

Pass the thread through the guide, and then

Note

CAUTION

Memo

pull the thread out toward the front.

LOWER THREADING

Pulling Up the Bobbin Thread

There may be some sewing applications where you want to pull up the bobbin thread; for example, when making gathers, darts, or doing free motion quilting or embroidery.

a Cutter

→ The cutter cuts the thread.

• If the thread is not correctly inserted through the tension spring of the bobbin case, it may cause incorrect thread tension. (see page

79)

• You can pull up the bobbin thread after threading the upper thread (“UPPER THREADING” on page 57).

Guide the bobbin thread through the

groove, following the arrow in the illustration.

* Do not cut the thread with the cutter. * Do not replace the bobbin cover.

While holding the upper thread, press the

“Needle Position” button to lower the needle.

Getting Ready

a Tension spring

• Be sure to hold down the bobbin with your finger and unwind the bobbin thread correctly. Otherwise, the thread may break or the thread tension will be incorrect.

Insert the tab in the lower-left corner of the

bobbin cover (1), and then lightly press down on the right side to close the cover (2).

Press to unlock all keys and

buttons.

a “Needle Position” button

Press the “Needle Position” button to raise

the needle.

Press to lock all keys and buttons.

Page 58

LOWER THREADING

Gently pull the upper thread. A loop of the

bobbin thread will come out of the hole in the needle plate.

Pull up the bobbin thread, pass it under the

presser foot and pull it about 100 mm (approx. 3-4 inches) toward the back of the machine, making it even with the upper thread.

a Upper thread b Bobbin thread

Replace the bobbin cover.

Press to unlock all keys and

buttons.

Page 59

UPPER THREADING

CAUTION

Memo

Note

UPPER THREADING

Upper Threading

Press → → →

→ in this order to display a

video example of the operation on the LCD (see page 46). Follow the steps explained below to complete the operation.

• Be sure to thread the machine properly. Improper threading can cause the thread to tangle and break the needle, leading to injury.

• When using the walking foot, the side cutter or accessories not included with this machine, attach the accessory to the machine after threading the machine.

Turn the main power to ON.

Press the “Presser Foot Lifter” button to

raise the presser foot.

→ The upper thread shutter opens so the machine can

be threaded.

Getting Ready

• The automatic threading function can be

used with sewing machine needle sizes 75/ 11 through 100/16.

• Thread such as transparent nylon monofila-

ment thread and thread with a thickness of 130/20 or thicker cannot be used with the automatic threading function.

• The automatic threading function cannot be

used with the wing needle or the twin needle.

a Upper thread shutter

• This machine is equipped with an upper thread shutter, allowing you to check that the upper threading is performed correctly.

Press the “Needle Position” button to raise

the needle.

• If you try to thread the needle automatically without raising the needle, the thread may not thread correctly.

Page 60

UPPER THREADING

CAUTION

Memo

Pivot the spool pin so that it angles upward.

Set the thread spool on the spool pin so that the thread unwinds from the front of the spool.

a Spool pin b Spool cap c Thread spool d Spool felt

Push the spool cap onto the spool pin as far

as possible, then return the spool pin to its original position.

• If a spool of thread whose core is 12 mm (1/2 inch) in diameter and 75 mm (3 inches) high is inserted onto the spool pin, use the mini spool insert.

a Spool cap (mini insert) b 12 mm (1/2 inch) c 75 mm (3 inches)

While holding the thread with both hands,

pull the thread up from under the thread guide plate.

• If the thread spool and/or spool cap are set incorrectly, the thread may tangle on the spool pin and cause the needle to break.

• When sewing with fine, cross-wound thread,

use the small spool cap, and leave a small space between the cap and the thread spool.

a Spool cap (small) b Thread spool (cross-wound thread) c Space

a Thread guide plate

While holding the thread in your right

hand, pass the thread through the thread guide in the direction indicated.

Guide the thread down, up, then down

through the groove, as shown in the illustration.

Page 61

Memo

• Look in the upper groove area to check if the

Note

Memo

thread catches on the take-up lever visible inside the upper groove area.

a Look in the upper groove area

UPPER THREADING

Pull the thread up through the thread cutter

to cut the thread, as shown in the illustration.

a Thread cutter

Getting Ready

Pass the thread through the needle bar

thread guide (marked “6”) by holding the thread with both hands and guiding it as shown in the illustration.

a Needle bar thread guide

Press the “Presser Foot Lifter” button to

lower presser foot.

• When using thread that quickly winds off the spool, such as metallic thread, it may be difficult to thread the needle if the thread is cut. Therefore, instead of using the thread cutter, pull out about 80 mm (approx. 3 inches) of thread after passing it through the thread guide disks (marked “7”).

a 80 mm (approx. 3 inches) or more

Press the “Automatic Threading” button to

have the machine automatically thread the needle.

Pass the thread through the thread guide

disks (marked “7”). Make sure that the thread passes through the groove in the thread guide.

a Groove in thread guide

→ The thread passes through the eye of the needle.

• When the “Automatic Threading” button is pressed, the presser foot will be automatically lowered. After threading is finished, the presser foot moves back to the position before the “Automatic Threading” button was pressed.

Page 62

UPPER THREADING

Note

Memo

Note

CAUTION

Carefully pull the end of the thread that was

passed through the eye of the needle.

* If a loop was formed in the thread passed through

the eye of the needle, carefully pull on the loop of thread through to the back of the needle.

• Pulling the loop of thread gently will avoid needle breakage.

• Some needles cannot be threaded with the needle threader. In this case, instead of using the needle threader after passing the thread through the needle bar thread guide (marked “6”), manually pass the thread through the eye of the needle from the front.

Pull out about 10-15 cm (approx. 4-6

inches) of the thread, and then pass it under the presser foot toward the rear of the machine.

→ Raise the presser foot lever if the presser foot is

lowered.

a About 10-15 cm (approx. 4-6 inches)

• If the needle could not be threaded or the thread was not passed through the needle bar thread guides, perform the procedure again starting from step Then, pass the thread through the eye of the needle after step

Using the Twin Needle Mode

The twin needle can only be used for patterns that

show after being selected. Before you select a stitch pattern, make sure the stitch can be sewn in

the twin needle mode (refer to the “STITCH SETTING CHART” at the end of this manual).

• Twin needle (part code XE4963-001) is recommended for this machine. Contact your authorized retailer for replacement needles (size 2.0/11 is recommended).

• Be sure to set the twin needle mode when using the twin needle. Using the twin needle while the machine is in single needle mode could cause the needle to break, resulting in damage.

• Do not sew with bent needles. The needle could break and cause injury.

• When using the twin needle, it is recommended to use presser foot “J”.

• When the twin needle is used, bunched stitches may occur depending on the types of fabric and thread that are used. Use monogramming foot “N” for decorative stitches.

• Before changing the needle or threading the machine, be sure to press

Screen, otherwise injuries may occur if the “Start/Stop” button or any other button is pressed and the machine starts sewing.

on the LCD

Page 63

UPPER THREADING

Note

Press to lock all keys and buttons

and then install the twin needle (“CHANGING THE NEEDLE” on page 67).

Thread the machine for the first needle

according to the procedure for threading a single needle (“Upper Threading” on page 57).

Pull up the supplemental spool pin and set it

in the up position.

a Supplemental spool pin

Place the additional spool of thread on the

supplemental spool pin, so that the thread unwinds from the front. Push the spool cap onto the spool pin as far as possible to secure the thread spool.

Getting Ready

Pass the thread through the needle bar

thread guides on the needle bar, then thread the needle on the left side manually.

a Needle bar thread guide

• The “Automatic Threading” button cannot be used. Manually thread the twin needle from front to back. Using the “Automatic Threading” button may result in damage to the machine.

a Spool cap b Spool pin c Thread spool

Hold the thread from the spool with both

hands, and place the thread in the thread guide.

* Do not place the thread in the pre-tension disks.

a Thread guide

Page 64

UPPER THREADING

Note

CAUTION

Memo

While holding the thread from the spool,

pull the thread through the lower notch in the thread guide plate, then through the upper notch. Hold the end of the thread with your left hand, and then guide the thread through the groove, following the arrows in the illustration.

Continue threading however do not pass

the thread in the needle bar thread guide “6” on the needle bar. Thread the needle on the right side.

Press to select the twin needle mode.

a Needle bar thread guide

Press to unlock all keys and

buttons.

Select a stitch pattern. (Example: )

* Refer to the “STITCH SETTING CHART” at the end

of this manual for the proper stitch to use with presser foot “J”.

→ The selected stitch is displayed.

• If the key is light gray after selecting

the stitch, the selected stitch cannot be sewn in the twin needle mode.

a Single needle/twin needle setting

→ appears.

• Be sure to set the twin needle mode when using the twin needle. Using the twin needle while the machine is in single needle mode could cause the needle to break, resulting in damage.

Start sewing.

Sample of Twin Needle Sewing

• To change direction when sewing with the

twin needle, raise the needle from the fabric, raise the presser foot lever, and then turn the fabric.

Page 65

Using the Spool Stand

Memo

The included spool stand is useful when using thread on spools with a large diameter (crosswound thread). This spool stand can hold two spools of thread.

UPPER THREADING

• Depending on the size of spool or the amount of thread remaining, choose the appropriate sized spool cap (large or medium). Spool cap (small) cannot be used with the spool cap base.

• See page 21 to assemble the spool stand.

• See page 52 to wind the bobbin when using the spool stand.

■ Using the Spool Stand

• Be sure to use a spool cap that is slightly larger than the spool. If the spool cap that is used is smaller or much larger than the spool, the thread may catch and sewing performance may suffer.

• When using thread on a thin spool, place the included spool felt on the spool pin, place the thread spool on the spool pin so that the center of the spool is aligned with the hole at the center of the spool felt, and then insert the spool cap onto the spool pin.

a Spool cap b Spool cap base

Attach the spool stand to the machine. (see

page 21.)

Place the spool of thread on the spool pin

so that the thread feeds off the spool clockwise. Firmly insert the spool cap onto the spool pin.

Getting Ready

a Spool felt

• When using thread on a cone spool, use the spool holder.

a Spool holder

Page 66

UPPER THREADING

Note

Memo

• When using 2 spools of thread, make sure that both spools are feeding in the same direction.

• Make sure that the spools do not touch each other, otherwise the thread will not feed off smoothly, the needle may break, or the thread may break or become tangled. In addition, make sure that the spools do not touch the telescopic thread guide at the center.

• Make sure that the thread is not caught under the spool.

Pull the thread off the spool. Pass the thread

from the back to the front through the thread guides at the top.

When using thread that quickly feeds off the spool, such as metallic thread, use the enclosed ring to prevent the thread from becoming entangled. Threading sequence; Pull the thread from the spool, place the thread through the ring from the bottom up (1), into the thread guide (2) and through the ring from the top down (3).

Thread the machine according to the steps

f to o of “Upper Threading” on page 57.

Using Threads that Unwind Quickly

■ Using the Spool Net

If using transparent nylon monofilament thread, metallic thread, or other strong thread, place the included spool net over the spool before using it. When using specialty threads, threading must be done manually. If the spool net is too long, fold it once to match it to the spool size before placing it over the spool.

a Spool net b Thread spool c Spool pin d Spool cap

• Guide the thread so that it does not become entangled with the other thread.

• After feeding the thread as instructed, wind any excess thread back onto the spool, otherwise the excess thread will become tangled.

Pass the thread through the machine's

thread guide from the right to the left.

• When threading the spool with the spool net on, make sure that 5-6 cm (approx. 2 - 2-1/2 inches) of thread are pulled out.

• It may be necessary to adjust the thread tension when using the spool net.

a Thread guide

Page 67

CHANGING THE PRESSER FOOT

CAUTION

CHANGING THE PRESSER FOOT

• Always press on the screen before changing the presser foot. If is not pressed and the “Start/Stop” button or another button is pressed, the machine will start and may cause injury.

• Always use the correct presser foot for the selected stitch pattern. If the wrong presser foot is used, the needle may strike the presser foot and bend or break, and may cause injury.

• Only use presser feet made for this machine. Using other presser feet may lead to accident or injury.

Press the black button on the presser foot

Removing the Presser Foot

Press → → →

→ in this order to display a

holder and remove the presser foot.

Getting Ready

video example of the operation on the LCD (see page 46). Follow the steps explained below to complete the operation.

Press the “Needle Position” button to raise

the needle.

Press to lock all keys and buttons.

* If the message “OK to automatically lower the

presser foot?” appears on the LCD screen, press OK to continue.

→ The entire screen becomes white, and all keys and

operation buttons are locked.

Raise the presser foot lever.

a Black button b Presser foot holder

Attaching the Presser Foot

• Make sure that the presser foot is installed in the correct direction, otherwise the needle may strike the presser foot, breaking the needle and causing injuries.

Place the new presser foot under the

holder, aligning the foot pin with the notch in the holder. Lower the presser foot lever so that the presser foot pin snaps into the notch in the holder.

a Notch b Pin

Page 68

CHANGING THE PRESSER FOOT

Note

Memo

CAUTION

Press to unlock all keys and

buttons.

Raise the presser foot lever.

Attaching the Walking Foot

The walking foot holds the fabric between the presser foot and the feed dogs to feed the fabric. This enables you to have better fabric control when sewing difficult fabrics (such as quilted fabrics or velvet) or fabrics that slip easily (such as vinyl, leather, or synthetic leather).

• Thread the needle manually when using the walking foot, or only attach the walking foot after threading the needle using the “Automatic Threading” button.

• When sewing with the walking foot, sew at medium to low speeds.

Set the operation lever of the walking foot

so that the needle clamp screw is set between the fork. Position the shank of the walking foot on the presser foot bar.

a Operation lever b Needle clamp screw c Fork d Walking foot shank e Presser foot bar

Lower the presser foot lever. Insert the

screw, and tighten the screw securely with the screwdriver.

• The walking foot can only be used with straight or zigzag stitch patterns. Reverse stitches cannot be sewn with the walking foot. Only select straight or zigzag stitch patterns with reinforcement stitches. (see page

74.)

Follow the steps in “Removing the Presser

Foot” on the previous page.

Loosen the screw of the presser foot holder

to remove the presser foot holder.

• Use the included screwdriver to tighten the screw securely. If the screw is loose, the needle may strike the presser foot and cause injury.

• Be sure to rotate the handwheel toward you (counterclockwise) to check that the needle does not strike the presser foot. If the needle strikes the presser foot, injury may result.

Page 69

CHANGING THE NEEDLE

CAUTION

Memo

Note

CHANGING THE NEEDLE

• Always press on the screen before changing the needle. If is not pressed and the Start/ Stop button or another operation button is pressed accidentally, the machine will start and injury may

result.

• Use only sewing machine needles made for home use. Other needles may bend or break and may cause injury.

• Never sew with a bent needle. A bent needle will easily break and may cause injury.

Getting Ready

Press → → →

→ in this order to display a

video example of the operation on the LCD (see page 46). Follow the steps explained below to complete the operation.

• To check the needle correctly, place the flat

side of the needle on a flat surface. Check the needle from the top and the sides. Throw away any bent needles.

a Parallel space b Level surface (bobbin cover, glass, etc.)

→ The entire screen becomes white, and all keys and

operation buttons are locked.

• Before replacing the needle, cover the hole in the needle plate with fabric or paper to prevent the needle from falling into the machine.

Use the screwdriver to turn the screw

toward the front of the machine and loosen the screw. Remove the needle.

Press the “Needle Position” button to raise

the needle.

Press to lock all keys and buttons.

* If the message “OK to automatically lower the

presser foot?” appears on the LCD screen, press OK to continue.

• Do not apply pressure to the needle clamp screw. Doing so may damage the needle or machine.

Page 70

CHANGING THE NEEDLE

CAUTION

With the flat side of the needle facing the

back, insert the new needle all the way to the top of the needle stopper (viewing window) in the needle clamp. Use a screwdriver to securely tighten the needle clamp screw.

a Needle stopper b Hole for setting the needle c Flat side of needle

• Be sure to push in the needle until it touches the stopper, and securely tighten the needle clamp screw with a screwdriver. If the needle is not completely inserted or the needle clamp screw is loose, the needle may break or the machine may be damaged.

Press to unlock all keys and

buttons.

Page 71

CHANGING THE NEEDLE

Memo

CAUTION

About the Needle

The sewing machine needle is probably the most important part of the sewing machine. Choosing the proper needle for your sewing project will result in a beautiful finish and fewer problems. Below are some things to keep in mind about needles.

• The smaller the needle number, the finer the needle. As the numbers increase, the needles get thicker.

• Use fine needles with lightweight fabrics, and thicker needles with heavyweight fabrics.

• To avoid skipped stitches, use ball point needle (golden colored) 90/14 with stretch fabrics.

• To avoid skipped stitches, use ball point needle (golden colored) 90/14 when sewing character or decorative stitches.

• Use needle 75/11 for embroidery. Use ball point needle 75/11 for embroidering patterns with short jump stitches such as alphabet characters when the thread trimming function is turned on.

• Ball point needles (golden colored) 90/14 are not recommended for embroidery, as they may bend or break, causing injury.

• It is recommended that a 90/14 needle should be used when embroidering on heavyweight fabrics or stabilizing products (for example, denim, puffy foam, etc.). A 75/11 needle may bend or break, which could result in injury.

• A home sewing machine needle 75/11 is inserted in the sewing machine.

Fabric/Thread/Needle Combinations

Getting Ready

The following table provides information concerning the appropriate thread and needle for various fabrics. Please refer to this table when selecting a thread and needle for the fabric you wish to use.

Fabric type/Application

Medium weight fabrics Broadcloth Cotton thread

Flannel, Gabardine Silk thread 50

Thin fabrics Lawn Cotton thread

Challis, Satin Silk thread 50

Thick fabrics Denim Cotton thread 30

Corduroy Synthetic thread

Tweed Silk thread

Stretch fabrics Jersey Thread for knits

Tr i c o t

Easily frayed fabrics Cotton thread

Silk thread 50

For top-stitching Synthetic thread

Silk thread

Thread

Type Size

60 - 90

50 - 60

50 - 90

50 90/14 - 100/16

Size of needle

75/11 - 90/14Taffeta Synthetic thread

65/9 - 75/11Georgette Synthetic thread

90/14 - 100/16

Ball point needle

(gold colored)

75/11 - 90/14

65/9 - 90/14Synthetic thread

• For transparent monofilament nylon thread, always use needle sizes 90/14 or 100/16. The same thread is usually used for the bobbin thread and upper thread.

• Be sure to follow the needle, thread, and fabric combinations listed in the table. Using an improper combination, especially a heavyweight fabric (i.e., denim) with a small needle (i.e., 65/9 - 75/11), may cause the needle to bend or break, and lead to injury. Also, the seam may be uneven, the fabric may pucker, or the machine may skip stitches.

Page 72

CHANGING THE NEEDLE

Page 73

Chapter 2

Sewing Basics

SEWING ..............................................................................................72

Sewing a Stitch ........................................................................................................ 72

■ Using the Multi-Function Foot Controller .......................................................................73

Sewing Reinforcement Stitches ...............................................................................74

Sewing Curves ......................................................................................................... 74

Changing Sewing Direction ..................................................................................... 75

■ Sewing a Seam Allowance of 0.5 cm or Less ...................................................................75

Sewing Heavyweight Fabrics................................................................................... 75

■ If the Fabric does not Fit under the Presser Foot.............................................................75

■ If the Fabric does not Feed ..............................................................................................76

Sewing Hook-and-Loop Fastener............................................................................. 76

Sewing Lightweight Fabrics .....................................................................................76

Sewing Stretch Fabrics ............................................................................................77

STITCH SETTINGS...............................................................................78

Setting the Stitch Width ..........................................................................................78

Setting the Stitch Length .........................................................................................79

Setting the Thread Tension ...................................................................................... 79

■ Proper Thread Tension ....................................................................................................79

■ Upper Thread is Too Tight...............................................................................................80

■ Upper Thread is Too Loose..............................................................................................80

USEFUL FUNCTIONS..........................................................................81

Automatic Reinforcement Stitching ........................................................................81

Automatic Thread Cutting ....................................................................................... 82

Using the Knee Lifter...............................................................................................83

Pivoting ................................................................................................................... 84

Automatic Fabric Sensor System (Automatic Presser Foot Pressure) .......................85

Needle Position – Stitch Placement......................................................................... 86

Locking the Screen .................................................................................................. 86

Checking the Needle Location in the Screen ........................................................... 87

Page 74

SEWING

CAUTION

Memo

SEWING

• To avoid injury, pay special attention to the needle while the machine is in operation. Keep your hands away from moving parts while the machine is in operation.

• Do not stretch or pull the fabric during sewing. Doing so may lead to injury.

• Do not use bent or broken needles. Doing so may lead to injury.

• Do not attempt to sew over basting pins or other objects during sewing. Otherwise, the needle may break and cause injury.

• If stitches become bunched, lengthen the stitch length setting before continuing sewing. Otherwise, the needle may break and cause injury.

Sewing a Stitch

Turn the main power to ON and press

to display the utility stitches, and

push the “Needle Position” button to raise the needle.

Press the key of the stitch you want to sew.

Install the presser foot (“CHANGING THE

PRESSER FOOT” on page 65).

• Always use the correct presser foot. If the wrong presser foot is used, the needle may strike the presser foot and bend or break, possibly resulting in injury. Refer to page 353 for presser foot recommendations.

Set the fabric under the presser foot. Hold

the fabric and thread in your left hand, and rotate the handwheel to set the needle in the sewing start position.

→ The symbol of the correct presser foot will be

displayed in the upper left corner of the LCD screen.

• The black button on the left side of presser

foot “J” should be pressed only if the fabric does not feed or when sewing thick seams (see page 76). Normally, you can sew without pressing the black button.

Lower the presser foot.

* You do not have to pull up the bobbin thread.

Page 75

Adjust the sewing speed with the speed

Memo

CAUTION

Note

Memo

CAUTION

control slide.

* You can use this slide to adjust sewing speed during

sewing.

a Slow b Fast

Press the “Start/Stop” button to start

sewing.

* Guide the fabric lightly by hand.

SEWING

• Do not press the “Thread Cutter” button after

the threads have been cut. Doing so could tangle the thread or break the needle and damage the machine.

• Do not press the “Thread Cutter” button when

there is no fabric set in the machine or during machine operation. The thread may tangle, possibly resulting in damage.

• When cutting thread thicker than #30, nylon monofilament thread, or other decorative threads, use the thread cutter on the side of the machine.

Sewing Basics

• When the foot controller is being used, you cannot start sewing by pressing the “Start/ Stop” button.

Press the “Start/Stop” button again to stop

sewing.

Press the “Thread Cutter” button to trim

the upper and lower threads.

When the needle has stopped moving, raise

the presser foot and remove the fabric.

• This machine is equipped with a bobbin thread sensor that warns you when the bobbin thread is almost empty. When the bobbin thread is nearly empty, the machine automatically stops. However, if the “Start/Stop” button is pressed, a few stitches can be sewn. When the warning displays, re-thread the machine immediately.

■ Using the Multi-Function Foot Controller

You can also use the included multi-function foot controller to start and stop sewing.

• Do not allow fabric pieces and dust to collect in the foot controller. Doing so could cause a fire or an electric shock.

→ The needle will return to the up position

automatically.

Page 76

SEWING

Memo

• Refer to Instruction and Reference Guide Addendum for the detailed use and programing of the multi-function foot controller.

• When the foot controller is being used, you cannot start sewing by pressing the “Start/ Stop” button.

• The foot controller cannot be used when embroidering.

• The foot controller can be used for sewing utility and decorative stitches when the embroidery unit is attached.

Insert the plugs for the main foot controller

into the foot controller jack and the external port on the right side of the machine.

* Refer to Instruction and Reference Guide Addendum

for detailed instructions of connecting the multifunction foot controller.

* Before connecting the multi-function foot controller,

be sure to assemble the controller according to Instruction and Reference Guide Addendum.

Sewing Reinforcement Stitches

Reverse/reinforcement stitches are generally necessary at the beginning and end of sewing. You can use the “Reverse/Reinforcement Stitch” button to sew reverse/reinforcement stitches manually (see page 15).

If the automatic reinforcement stitch is selected on the screen, reverse stitches (or reinforcement stitches) will be sewn automatically at the beginning of sewing when the “Start/Stop” button is pressed. Press the “Reverse/Reinforcement Stitch” button to sew reverse stitches (or reinforcement stitches) automatically at the end of sewing (see page 81).

a Foot controller jack b External port

Slowly depress the foot controller to start

sewing.

Pressing down on the foot controller increases the sewing speed; releasing the pressure on the foot controller decreases the sewing speed.

• The speed that is set using the sewing speed controller is the foot controller’s maximum sewing speed.

a Reverse stitch b Reinforcement stitch

If the stitch which you select has a double mark “ ” at the top of the key display, you can sew reverse stitches by holding the “Reverse/ Reinforcement Stitch” button.

If the stitch which you select has a dot mark “ ” at the top of the key display, you can sew reinforcement stitches by holding the “Reverse/ Reinforcement Stitch” button.

Sewing Curves

Sew slowly while keeping the seam parallel with the fabric edge as you guide the fabric around the curve.

Release the foot controller to stop the

machine.

Page 77

SEWING

CAUTION

Memo

Changing Sewing Direction

Stop the machine. Leave the needle in the fabric, and press the “Presser Foot Lifter” button to raise the presser foot. Using the needle as a pivot, turn the fabric so that you can sew in the new direction. Press the “Presser Foot Lifter” button to lower the presser foot and start sewing.

The pivot setting is useful when changing the sewing direction. When the machine is stopped at the corner of the fabric, the machine stops with the needle in the fabric and the presser foot is automatically raised so the fabric can easily be rotated (“Pivoting” on page 84).

■ Sewing a Seam Allowance of 0.5 cm or Less

Baste the corner before sewing, and then, after changing the sewing direction at the corner, pull the basting thread toward the back while sewing.

Sewing Heavyweight Fabrics

The sewing machine can sew fabrics up to 6 mm (approx. 1/4 inch) thick. If the thickness of a seam causes sewing to occur at an angle, help guide the fabric by hand and sew on the downward slope.

Sewing Basics

• Do not forcefully push fabrics more than 6 mm (approx. 1/4 inch) thick through the sewing machine. This may cause the needle to break and cause injury.

• Thicker fabrics require a larger needle (“CHANGING THE NEEDLE” on page 67).

■ If the Fabric does not Fit under the Presser Foot

If the presser foot is in the up position, and you are sewing heavyweight or multiple layers of fabric which do not fit easily under the presser foot, use the presser foot lever to raise the presser foot to its highest position. The fabric will now fit under the presser foot.

a 5 mm (approx. 3/16 inch)

• You cannot use the presser foot lever after the presser foot has been raised using the “Presser Foot Lifter” button.

Page 78

SEWING

Memo

CAUTION

Note

■ If the Fabric does not Feed

If the fabric does not feed when starting to sew or when sewing thick seams, press the black button on the left side of presser foot “J”.

Raise the presser foot.

While keeping the black button on the left

side of presser foot “J” pressed in, press the “Presser Foot Lifter” button to lower the presser foot.

Release the black button.

Sewing Hook-and-Loop Fastener

• Do not use adhesive backed hook-and-loop fastener designed for sewing. If the adhesive sticks to the needle or the bobbin hook race, it may cause malfunction.

• If the hook-and-loop fastener is sewn with a fine needle (65/9-75/11), the needle may bend or break.

• Before starting to sew, baste the fabric and

hook-and-loop fastener together.

Make sure that the needle passes through the hook-and-loop fastener by rotating the handwheel and lower the needle into the hook-and-loop fastener before sewing. Sew the edge of the hookand-loop fastener at a slow speed. If the needle does not pass through the hook-andloop fastener, replace the needle with the needle for thick fabrics (page 69).

→ The presser foot remains level, enabling the fabric to

be fed.

• Once the trouble spot has been passed, the foot will return to its normal position.

• When “Automatic Fabric Sensor System” (Automatic Presser Foot Pressure) in the machine settings screen is set to “ON”, the thickness of the fabric is automatically detected by the internal sensor so the fabric can be fed smoothly for best sewing results. (see page 85 for details.)

a Edge of the hook-and-loop fastener

Sewing Lightweight Fabrics

Place thin paper or tear away embroidery stabilizer under thin fabrics to make sewing easier. Gently tear off the paper or the stabilizer after sewing.

a Thin paper

Page 79

Sewing Stretch Fabrics

Memo

First, baste together the pieces of fabric, and then sew without stretching the fabric.

In addition, a better result can be achieved by using thread for knits or a stretch stitch.

SEWING

• For best results when sewing stretch fabrics, decrease the pressure of the presser foot (“Using the Machine Setting Mode Key” on page 35).

a Basting stitching

Sewing Basics

Page 80

STITCH SETTINGS

Note

Memo

Note

STITCH SETTINGS

When you select a stitch, your machine automatically selects the appropriate stitch width, stitch length, and upper thread tension. However, if needed, you can change any of the individual settings.

• Settings for some stitches cannot be changed (refer to the “STITCH SETTING CHART” at the end of this manual).

• If you turn off the machine or select another stitch without saving stitch setting changes (“Saving Your Stitch Settings” on page 92), the stitch settings will return to their default settings.

Setting the Stitch Width

Follow the steps below when you want to change the zigzag stitch pattern width.

• For an alternate method of changing the stitch width using the speed controller, see page 115.

Example:

Press to narrow the zigzag stitch pattern width.

Press to widen the zigzag stitch pattern width.

→ The value in the display gets bigger.

• Press to return the stitch width to the original setting.

• After adjusting the stitch width, slowly rotate the handwheel toward you (counterclockwise) and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break.

→ The value in the display gets smaller.

Page 81

STITCH SETTINGS

Memo

CAUTION

Setting the Stitch Length

Follow the steps below when you want to change the stitch pattern length.

Example:

Press to shorten the stitch length.

Setting the Thread Tension

You may need to change the thread tension, depending on the fabric and thread being used. Follow the steps below to make any necessary changes.

■ Proper Thread Tension

The upper thread and the bobbin thread should cross near the center of the fabric. Only the upper thread should be visible from the right side of the fabric, and only the bobbin thread should be visible from the wrong side of the fabric.

Sewing Basics

→ The value in the display gets smaller.

Press to lengthen the stitch length.

→ The value in the display gets bigger.

• Press to check changes made to the stitch.

• Press to return the stitch length to the original setting.

a Wrong side b Surface c Upper thread d Bobbin thread

• If the stitches get bunched together, lengthen the stitch length and continue sewing. Do not continue sewing without lengthening the stitch length. Otherwise, the needle may break and cause injury.

Page 82

STITCH SETTINGS

Note

Memo

Note

Memo

■ Upper Thread is Too Tight

If the bobbin thread is visible from the right side of the fabric, the upper thread is too tight.

• If the bobbin thread was incorrectly

threaded, the upper thread may be too tight. In this case, refer to “Setting the Bobbin” (page 54) and rethread the bobbin thread.

a Bobbin thread b Upper thread c Surface d Locks appear on surface of fabric

■ Upper Thread is Too Loose

If the upper thread is visible from the wrong side of the fabric, the upper thread is too loose.

• If the upper thread was incorrectly threaded, the upper thread may be too loose. In this case, refer to “Upper Threading” (page 57) and rethread the upper thread.

a Upper thread b Bobbin thread c Wrong side d Locks appear on wrong side of fabric

Press , to loosen the upper thread.

• When you finish sewing, remove the bobbin cover and then make sure that the thread is shown as below. If the thread is not shown as below, the thread is not inserted through the tension-adjusting spring of the bobbin case correctly. Reinsert the thread correctly. For details, refer to page 54.

Press , to tighten the upper thread.

• Press to return the thread tension to the original setting.

Page 83

USEFUL FUNCTIONS

Memo

Automatic Reinforcement Stitching

USEFUL FUNCTIONS

Set the fabric in the start position and start

sewing.

After selecting a stitch pattern, turn on the automatic reinforcement stitching function before sewing, and the machine will automatically sew reinforcement stitches (or reverse stitches, depending on the stitch pattern) at the beginning and end of sewing.

Select a stitch pattern.

Press to set the automatic

reinforcement stitching function.

a Reverse stitches (or reinforcement stitches)

→ The machine will automatically sew reverse stitches

(or reinforcement stitches) and then continue sewing.

• If you press the “Start/Stop” button to pause sewing, press it again to continue. The machine will not sew reverse/reinforcement stitches again.

Press the “Reverse/Reinforcement Stitch”

button.

Sewing Basics

→ The key will display as .

• Some stitches, such as buttonholes and bar tacks, require reinforcement stitches at the beginning of sewing. If you select one of these stitches, the machine will automatically turn on this function (the key appears

as when the stitch is selected).

a Reverse stitches (or reinforcement stitches)

→ The machine will sew reverse stitches (or

reinforcement stitches) and stop.

• To turn off the automatic reinforcement

stitching function, press again, so it

appears as .

Page 84

USEFUL FUNCTIONS

Memo

Automatic Thread Cutting

After selecting a stitch pattern, turn on the automatic thread cutting function before sewing, and the machine will automatically sew reinforcement stitches (or reverse stitches, depending on the stitch pattern) at the beginning and end of sewing, and trim the threads at the end of sewing. This function is useful when sewing buttonholes and bar tacks.

Select a stitch pattern.

Press to set the automatic thread

cutting function.

Set the fabric in the start position and start

sewing.

a Reverse stitches (or reinforcement stitches)

→ The machine will automatically sew reverse stitches

(or reinforcement stitches) and then continue sewing.

• If you press the “Start/Stop” button to pause sewing, press the same button again to continue. The beginning reverse/reinforcement stitches will not be sewn again.

→ The key will display as .

• This function is set automatically when sewing embroidery.

Press the “Reverse/Reinforcement

Stitching” button.

a Reverse stitches (or reinforcement stitches)

→ The machine will sew reverse stitches (or

reinforcement stitches), then trim the thread.

• To turn off the automatic thread cutting func-

tion, press again, so it appears as

Page 85

Using the Knee Lifter

CAUTION

Note

CAUTION

Memo

Using the knee lifter, you can raise and lower the presser foot with your knee, leaving both hands free to handle the fabric.

Change the operating position of the knee

lifter handle before inserting into the machine. Slide up the knee lifter handle slightly and rotate it while releasing pressure so handle will click into position.

* The knee lifter can be adjusted to three different

angles.

USEFUL FUNCTIONS

Align the tabs on the knee lifter with the

notches in the knee lifter slot on the front of the machine. Insert the knee lifter bar as far as possible.

• Only change position of the knee lifter handle when knee lifter is not on the machine, otherwise the knee lifter may damage the mounting slot on front of the machine.

Sewing Basics

a Knee lifter handle

→ Rotate knee lifter handle till it clicks into the

selected position that is most comfortable for you.

• If the knee lifter bar is not pushed into the

mounting slot as far as possible, it may come out during use.

Use your knee to move the knee lifter bar to

the right in order to raise the presser foot. Release the knee lifter to lower the presser foot.

• Be sure to keep your knee away from the knee lifter during sewing. If the knee lifter is pushed during machine operation, the needle may break or the thread tension may loosen.

• When the presser foot is in the up position,

move the knee lifter to the far right and then release to return the presser foot to the down position.

Page 86

USEFUL FUNCTIONS

CAUTION

Memo

Note

Pivoting

If the pivot setting is selected, the machine stops with the needle lowered (in the fabric) and the presser foot is automatically raised to an appropriate height when the “Start/Stop” button is pressed. When the “Start/Stop” button is pressed again, the presser foot is automatically lowered and sewing continues. This function is useful for stopping the machine to rotate the fabric.

• When the pivot setting is selected, the machine starts when the “Start/Stop” button is pressed or the foot controller is pressed down even if the presser foot has been raised. Be sure to keep your hands and other items away from the needle, otherwise injuries may occur.

• When the pivot setting is selected, the

height of the presser foot when sewing is stopped can be changed according to the

type of fabric being sewn. Press to display “Pivoting Height” on 2/8 of the

settings screen. Press or to select

one of the three heights (3.2 mm, 5.0 mm or

7.5 mm). To raise the presser foot further, increase the setting. (Normally, 3.2 mm is set.)

• The “Needle Position – UP/DOWN” (3/8 of the settings screen) must be set in the down

position

used. When “Needle Position – UP/DOWN”

is set in the raised position, appears as light gray and cannot be used.

• The pivot function can only be used with stitches where presser foot J or N is indicated in the upper-left corner of the

screen. If any other stitch is selected, appears as light gray and is not available.

• Use the “Presser Foot Lifter” button to make sure the presser foot is lowered, and then press the “Start/Stop” button to continue sewing.

• If the pivot setting is selected, and

beside “Presser Foot Height” in the settings screen are not available and the setting cannot be changed.

Select a stitch.

Press to select the pivot setting.

for the pivot function to be

→ The key appears as .

Page 87

Place the fabric under the presser foot with

Memo

the needle at the starting point of the stitching, and then press the “Start/Stop” button. The machine will begin sewing.

• If you press the “Start/Stop” button to pause sewing, press it again to continue, reverse stitches (or reinforcement stitches) will not be sewn.

USEFUL FUNCTIONS

Automatic Fabric Sensor System (Automatic Presser Foot Pressure)

The thickness of the fabric is automatically detected and the presser foot pressure is automatically adjusted with an internal sensor while sewing, to insure that your fabric is fed smoothly. The fabric sensor system works continuously while sewing. This function is useful for sewing over thick seams (see page 75), or quilting (see page 113).

Sewing Basics

Press the “Start/Stop” button to stop the

machine at the point where the sewing direction changes.

→ The machine stops with the needle in the fabric, and

the presser foot is raised.

Rotate the fabric, and then press the “Start/

Stop” button.

Press .

→ The settings screen appears.

Set “Automatic Fabric Sensor System” to

“ON”.

→ The presser foot is automatically lowered, and

sewing continues.

Press to return to the original screen.

Page 88

USEFUL FUNCTIONS

CAUTION

Needle Position – Stitch Placement

When the “Needle Position – Stitch Placement” is on, the needle will be partially lowered for precise stitch placement and then press the “Needle Position” button to lower the needle completely. Each press of the “Needle Position” button changes the needle to the next position. When the “Needle Position – Stitch Placement” is turned off, each press of the “Needle Position” button simply raises and then lowers the needle.

a Pointing needle mode is ON b Pointing needle mode is OFF

* When the needle is nearly lowered by pressing the

“Needle Position” button, the feed dogs are lowered. At this time, the fabric can be shifted to finely adjust the needle drop position.

Locking the Screen

If the screen is locked before starting to sew, the various settings such as the stitch width and stitch length are locked and cannot be changed. This prevents screen settings from accidentally being changed or the machine from being stopped while large pieces of fabric or projects are being sewn. The screen can be locked when sewing utility stitches and character decorative stitches.

Select a stitch pattern.

If necessary, adjust any settings such as the

stitch width and stitch length.

Press to lock the screen settings.

→ The key appears as .

Sew your project.

When you are finished sewing, press

again to unlock the screen settings.

Press .

Set “Needle Position – Stitch Placement” to

“ON” or “OFF”.

• If the screen is locked ( ), unlock the

screen by pressing . While the screen is

locked, no other key can be operated.

• The settings are unlocked when the machine is turned off and on.

Press to return to the original screen.

Page 89

Checking the Needle Location in

Note

the Screen

Press to use the built-in camera to view the sewing area in the LCD screen. View the location of the needle from 2 different angles and the needle drop position, even if the needle has not actually been lowered.

USEFUL FUNCTIONS

GRID VIEW

Press this key to display a grid.

→ The camera view window appears.

a CAMERA IMAGE b GRID VIEW c CLOSE d VIEW ANGLE e NEEDLE DROP POSITION f ZOOM

Sewing Basics

Press this key to close the screen.

VIEW ANGLE

Each press of switches the built-in camera

between a front view and an angled top view.

NEEDLE DROP POSITION

Press to show the needle drop position in

the screen as “ ”.

Lower the presser foot before pressing .

Once the needle drop position appears on the screen, you can raise the presser foot and change the needle drop position by moving the fabric.

CAMERA IMAGE

Press this key to save a camera image to the USB media. Insert the USB media to the machine to save a camera image (Refer to “Saving a Settings Screen Image to USB Media” on page 39). The files for camera images are saved with the name “C**.BMP”. A maximum of 100 camera images can be saved in one USB media.

* “**” in the name “C**.BMP” will automatically be

replaced with a number between 00 and 99.

a Needle drop position

ZOOM

Press to enlarge the image in the screen.

Press again to return the image to its original

display size.

• The camera view window disappears when you start sewing.

• When sewing thick fabrics, the needle drop position indicated in the screen may differ from the actual position.

Page 90

USEFUL FUNCTIONS

Page 91

Chapter 3

Utility Stitches

SELECTING UTILITY STITCHES......................90

■ Stitch Selection Screens............................................................90

Selecting a Stitch .............................................................. 91

■ Using the Mirror Image Key .....................................................91

■ Using the Image Key.................................................................92

Saving Your Stitch Settings ............................................... 92

■ Saving Settings..........................................................................92

■ Retrieving Saved Settings..........................................................93

SEWING THE STITCHES.................................94

Straight Stitches ................................................................ 94

■ Changing the Needle Position

(Left or Middle Needle Position Stitches Only) ........................ 96

■ Aligning the Fabric with a Mark on the Needle Plate

or Bobbin Cover (with Mark) ...................................................96

■

Aligning the Fabric with the Vertical Stitch Alignment “V” Foot

■

Using the Straight Stitch Needle Plate and the Straight Stitch Foot

■ Basting ..................................................................................... 98

Dart Seam......................................................................... 99

Gathering.......................................................................... 99

Flat Fell Seam.................................................................. 100

Pintuck............................................................................ 101

Zigzag Stitches................................................................ 102

■ Overcasting (Using a Zigzag Stitch) .......................................102

■ Appliqué (Using a Zigzag Stitch) ............................................102

■ Patchwork (for Crazy Quilt)................................................... 103

■ Sewing Curves (Using a Zigzag Stitch) ................................... 103

■ Cord Guide Bobbin Cover (Using a Zigzag Stitch) .................103

Elastic Zigzag Stitches ..................................................... 104

■ Tape Attaching .......................................................................104

■ Overcasting ............................................................................ 104

Overcasting .................................................................... 105

■ Overcasting Using Presser Foot “G” ...................................... 105

■ Overcasting Using Presser Foot “J”........................................ 106

■ Overcasting Using the Side Cutter ......................................... 107

■ When Sewing Straight Stitches While Using the Side Cutter.. 109

Quilting .......................................................................... 110

■ Piecing ................................................................................... 113

■ Quilting .................................................................................. 113

■ Appliqué.................................................................................114

■ Quilting with Satin Stitches.................................................... 115

■ Free Motion Quilting..............................................................116

■ Echo Quilting Using the Free Motion Echo

Quilting Foot “E”....................................................................119

Blind Hem Stitches ......................................................... 122

■ If the Needle Catches Too Much of the Hem Fold .................124

■ If the Needle does not Catch the Hem Fold ........................... 124

Appliqué ......................................................................... 125

■ Appliqué Sharp Curves ...........................................................125

■ Appliqué Corners ...................................................................125

Shelltuck Stitches............................................................ 126

Scallop Stitches ............................................................... 127

Crazy Quilting ................................................................ 127

Smocking Stitches ........................................................... 128

Fagoting .......................................................................... 128

Tape or Elastic Attaching ................................................ 129

........ 97

.... 97

Heirloom .........................................................................130

■ Hemstitching (1) (Daisy Stitch)...............................................130

■ Hemstitching (2) (Drawn Work (1))........................................130

■ Hemstitching (3) (Drawn Work (2))........................................131

One-step Buttonholes ......................................................132

■ Sewing Stretch Fabrics ............................................................135

■ Odd Shaped Buttons/Buttons that do Not Fit into the Button

Holder Plate............................................................................135

Four-step Buttonholes......................................................136

■ Darning...................................................................................138

Bar Tacks .........................................................................140

■ Bar Tacks on Thick Fabrics......................................................141

Button Sewing .................................................................142

■ Attaching 4 Hole Buttons........................................................143

■ Attaching a Shank to the Button .............................................143

Eyelet...............................................................................144

Multi-directional Sewing (Straight Stitch and Zigzag Stitch)

.....145

Zipper Insertion ...............................................................146

■ Centered Zipper......................................................................146

■ Inserting a Side Zipper............................................................147

Edge Sewing..................................................................... 148

Page 92

SELECTING UTILITY STITCHES

■ Stitch Selection Screens

There are 6 categories of Utility Stitches. If a page number such as appears, there is more than one stitch

selection screen for that category.

Straight/Overcasting Decorative Stitches Heirloom Stitches

Buttonholes/Bar tacks Multi-directional Sewing Quilting Stitches

Page 93

■ Using the Mirror Image Key

Memo

Note

Selecting a Stitch

Turn the main power to ON and press

to display the utility stitches.

→ Either “1-01 Straight stitch (Left)” or “1-03 Straight

stitch (Middle)” is selected, depending on the setting selected in the setting screen.

Use to select

the category you want.

* Press to view the next page.

* Press to view previous page.

Depending on the type of utility stitch you select, you may be able to sew a horizontal mirror image of the stitch.

If is lit when you select a stitch, it will be

possible to make a mirror image of the stitch.

• If is light gray after you select a stitch,

Press to create a horizontal mirror image of the

selected stitch.

SELECTING UTILITY STITCHES

you cannot create a horizontal mirror image of the selected stitch due to the type of stitch or type of presser foot recommended (this is true of buttonholes, multi-directional sewing, and others).

a Preview of the selected stitch b Stitch selection screen c Percentage size of view

The key will display as .

Utility Stitches

Press the key of the stitch you want to sew.

• For details on each stitch, refer to the “STITCH SETTING CHART” at the end of this manual.

Page 94

SELECTING UTILITY STITCHES

Memo

Note

■ Using the Image Key

You can display an image of the selected stitch. You can check and change the colors of the image of the screen.

Press .

→ An image of the selected stitch is displayed.

Press to change the thread color of

the stitch on the screen.

Saving Your Stitch Settings

The settings for the zigzag stitch width, stitch length, thread tension, automatic thread cutting, automatic reinforcement stitching, etc., are preset in the machine for each stitch. However, if you have specific settings that you wish to reuse later for a stitch, you can change the settings so that they can be saved for that stitch. Five sets of settings can be saved for a single stitch.

* Press to display an enlarged image of the

stitch.

■ Saving Settings

Select a stitch. (Example: )

Specify your preferred settings.

a Stitch screen

• The color changes every time you press

• If stitches are wider or larger than display, press darkened arrows to move the stitch pattern for better visibility.

Press to go back to the original

screen.

Page 95

SELECTING UTILITY STITCHES

Memo

Press .

Press the numbered key of the settings to be

retrieved.

* Press to return to the original screen without

retrieving settings.

Utility Stitches

→ The settings are saved and the original screen

automatically appears.

• If you try to save settings when there are already 5 sets of settings saved for a stitch, the message “The pockets are full. Delete a pattern” will appear. Close the message and delete a setting referring to page 93.

■ Retrieving Saved Settings

Select a stitch.

• When a stitch is selected, the last settings retrieved are displayed. The last settings retrieved are retained even if the machine was turned off or a different stitch was selected.

Press .

a Numbered keys

Press .

→ The selected settings are retrieved, and the original

screen automatically appears.

• To save new settings when there are already 5 sets of settings saved for a stitch,

press . Press the numbered key of

the setting to be deleted. Press ,

press and then . The new setting will be saved in place of the recently

deleted setting.

• You can delete all the saved settings by

pressing .

Page 96

SEWING THE STITCHES

Memo

SEWING THE STITCHES

Straight Stitches

Stitch Stitch name

Straight stitch (Left) General sewing, gather, pintuck,

Straight stitch (Middle)

Triple stretch stitch General sewing for

Stem stitch Reinforced stitching, sewing and

Decorative stitch Decorative stitching, top

Presser

foot

Applications

etc. Reverse stitch is sewn while pressing “Reverse/ Reinforcement Stitch” button.

etc. Reinforcement stitch is sewn while pressing “Reverse/ Reinforcement Stitch” button.

General sewing, gather, pintuck, etc. Reverse stitch is sewn while pressing “Reverse/ Reinforcement Stitch” button.

General sewing, gather, pintuck, etc. Reinforcement stitch is sewn while pressing “Reverse/ Reinforcement Stitch” button.

reinforcement and decorative topstitching

decorative applications

stitching

Stitch width

[mm (inch)]

Auto Manual Auto Manual

0.0 (0)

3.5

(1/8)

3.5

(1/8)

0.0 (0)

1.0

(1/16)

0.0 (0)

0.0 - 7.0 (0 - 1/4)

1.0 - 3.0

(1/16 - 1/8)

0.0 - 7.0 (0 - 1/4)

Stitch length

[mm (inch)]

2.5

(3/32)

2.5

(3/32)

2.5

(3/32)

2.5

(3/32)

2.5

(3/32)

2.5

(3/32)

2.5

(3/32)

0.2 - 5.0

(1/64 - 3/16)

0.2 - 5.0

(1/64 - 3/16)

0.2 - 5.0

(1/64 - 3/16)

0.2 - 5.0

(1/64 - 3/16)

1.5 - 4.0

(1/16 - 3/16)

1.0 - 4.0

(1/16 - 3/16)

1.0 - 4.0

(1/16 - 3/16)

Twin

needle

( J )

Basting stitch Basting

a Left needle position b Middle needle position

0.0 (0)

0.0 - 7.0 (0 - 1/4)

a Reverse stitch b Reinforcement stitch

(3/4)

5 - 30

(3/16 - 1-3/16)

• If the selected stitch has a double mark “ ” at the top of the key display, you can sew reverse stitches holding the “Reverse/Reinforcement Stitch” button.

• If the selected stitch has a dot mark “ ” at the top of the key display, you can sew reinforcement stitches holding the “Reverse/Reinforcement Stitch” button (see page 74).

Page 97

SEWING THE STITCHES

CAUTION

Memo

Select a stitch.

Attach presser foot “J”.

* Attach presser foot “N” when you select .

Hold the thread tail and fabric with your

left hand, and rotate the handwheel with your right hand to insert the needle into the fabric.

Press the “Start/Stop” button to sew

forward.

a Reverse stitches

→ The machine will begin sewing slowly.

• Be sure the needle does not strike a basting pin, or any other objects, during sewing. The thread could tangle or the needle could break, causing injury.

When sewing is completed, hold the

“Reverse/Reinforcement Stitch” button to sew 3-4 reverse stitches (or reinforcement stitches) at the end of the seam.

Utility Stitches

a Sewing start position

Lower the presser foot, and hold the

“Reverse/Reinforcement Stitch” button to sew 3-4 stitches.

→ The machine sews reverse stitches (or reinforcement

stitches).

After sewing, press the “Thread Cutter”

button to trim the threads.

• When the automatic thread cutting and auto-

matic reinforcement stitch keys on the screen are selected, reverse stitches (or reinforcement stitches) will be sewn automatically at the beginning of sewing when the “Start/Stop” button is pressed. Press the “Reverse/Reinforcement Stitch” button to sew reverse stitches (or reinforcement stitches) and trim the thread automatically at the end of sewing.

Page 98

SEWING THE STITCHES

■ Changing the Needle Position (Left or Middle Needle Position Stitches Only)

When you select left or middle needle position

stitches, you can use and in the stitch

width display to change the position of the needle. Match the distance from the right edge of the presser foot to the needle with the stitch width, then align the edge of the presser foot with the edge of the fabric during sewing for an attractive finish.

a Stitch width

Example: Left/Middle needle position stitches

■ Aligning the Fabric with a Mark on the Needle Plate or Bobbin Cover (with Mark)

While sewing, align the edge of the fabric with the 16 mm (approx. 5/8 inch) mark on the needle plate or bobbin cover (with mark) depending on the needle position (left or middle (center) needle position stitches only).

For stitches with a left needle position (Stitch width: 0.0 mm)

12.0 mm (approx.

1/2 inch)

8.5 mm

(approx.

11/32

inch)

6.5 mm (approx. 1/4 inch)

a Seam b Presser foot c Centimeters d Inches e Needle plate f 16 mm (5/8 inch)

For stitches with a middle (center) needle position (Stitch width: 3.5 mm)

5.0 mm

(approx.

3/16 inch)

a Seam b Presser foot c Inches d Bobbin cover (with mark) e 16 mm (5/8 inch)

Page 99

SEWING THE STITCHES

CAUTION

Note

■ Aligning the Fabric with the Vertical Stitch Alignment “V” Foot

Sew while keeping the right edge of the fabric aligned with a desired position of markings on the vertical stitch alignment “V” foot. You can also use the vertical stitch alignment “V” foot for setting a stitch width using the built-in camera (see page 148).

a Seam b Vertical stitch alignment “V” foot c Markings

■ Using the Straight Stitch Needle Plate and the Straight Stitch Foot

The straight stitch needle plate and the straight stitch foot can only be used for straight stitches (middle needle position stitches). Use the straight stitch needle plate and the straight stitch foot when sewing thin fabrics or when sewing small pieces which tend to sink into the hole of the regular needle plate during sewing. The straight stitch foot is perfect to reduce puckering on lightweight fabrics. The small opening on the foot provides support for the fabric as the needle travels through the fabric.

Grasp both sides of the needle plate cover,

and then slide it toward you.

a Needle plate cover

Grasp the bobbin case, and then pull it out.

a Bobbin case

Use the disc-shaped screw driver included

with the machine to unscrew and remove the regular needle plate.

Utility Stitches

• Always use the straight stitch foot in combination with the straight stitch needle plate.

Press the “Needle Position” button to raise

the needle and turn the main power to OFF or press .

Remove the needle and the presser foot

holder (see page 66 through 67).

Remove the flat bed attachment or the

embroidery unit if either are attached.

Set the straight stitch needle plate in place

and use the disc-shaped screw driver to tighten the plate.

a Round hole

• Align the two screw holes on the needle plate with the two holes on the machine. Use the disc-shaped screw driver included with the machine to secure the screws in the needle plate.

Page 100

SEWING THE STITCHES

Memo

CAUTION

Memo

Insert the bobbin case in its original

position, and then attach the needle plate cover.

After reinstalling the needle plate cover,

select any of the straight stitches.

• When using the straight stitch needle plate, all straight stitches become middle needle position stitches. You cannot change the needle position using the width display.

• Always secure the needle plate before inserting the bobbin case into its original position.

• Selecting other stitches will cause an error message to be displayed.

• Slowly rotate the handwheel toward you (counterclockwise) before sewing and make sure that the needle is not contacting the straight stitch foot and straight stitch needle plate.

Insert needle and attach the straight stitch

foot.

■ Basting

Select and attach presser foot “J”.

Press the “Reverse/Reinforcement Stitch”

button to sew reinforcement stitches, then continue sewing.

• When you use the basting stitch for gathering, do not use a reinforcement stitch at the beginning; you should lift the presser foot, rotate the handwheel toward you (counterclockwise), pull up the bobbin thread and pull a length of top and bobbin thread out from the rear of the machine.

• You can set the stitch length between 5 mm (approx. 3/16 inch) and 30 mm (approx. 1-3/16 inches)

a Notch b Pin

Start sewing.

* After sewing, make sure to remove the straight stitch

needle plate and the straight stitch foot, and reinstall the regular needle plate, the needle plate cover and the presser foot “J”.

• To prevent puckering on fine fabrics, use a fine needle, size 75/11, and a short stitch length. For heavier fabrics, use a heavier needle, size 90/14, and longer stitches.

a Between 5 mm (approx. 3/16 inch) and 30 mm

(approx. 1-3/16 inches)

Sew while keeping the fabric straight.

End the basting with reinforcement stitches.

Baby Lock BLSOG2 Ellisimo Gold II User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual