INSTALLATION GUIDE
Vertical Tilt Adaptor for AXIS 212 PTZ-V
ENGLISH DEUTSCH
FRAN
Ç
AIS
ITALIANO
ESPAÑOL
Vertical Tilt Adaptor - AXIS 212 PTZ-V Page 3
Vertical Tilt Adaptor
The vertical tilt adaptor enables mounting the camera on a
wall at a downward angle. It is ideal for use in a corridor or
above a door. At this angle the camera captures only essential
views and eliminates the ceiling from images.
The vertical tilt adaptor is made of metal, and is vandal
resistant.
Package contents
1. Vertical Tilt Adaptor
2. Four plastic plugs
3. Four screws: M4x16 Resitorx ISO7380
4. Four screws: ST4.2x38 RXS-Z FZB
5. Drill template
6. Documentation
ENGLISH
Mounting the vertical tilt adaptor on a wall
1. Using the supplied drill template, drill holes in the wall.
2. Insert plastic plugs into the holes.
3. Place the vertical tilt adaptor on the wall, insert the four ST4.2x38 RXS-Z FZB screws, and
tighten.
Mounting the camera
1. Mount the camera on the vertical tilt adaptor using two of the M4x16 Resitorx ISO7380
screws. See the camera’s installation guide for details.
2. Place the dome casing over the camera. Insert two of the M4x16 Resitorx ISO7380 screws at
the sides and tighten.
The installation is now complete.