AVF TP800-XL User Manual
TP800 (S, D, XL)
Page 1
of 5
Assembly and Setup Instructions
Thank you for purchasing VFI's TP800 telepresence stand.
This product was designed for video conferencing and collaboration applications
and is compatible with most residential and commercial TV's.
Note:
If you cannot understand these instructions or are concerned about safety of the installation
Contact a qualified contractor or contact VFI at 1-877-834-3876.
Not all hardware supplied will be used depending on configuration and manufacturer of your display/s.
Rev 5.0
Supplied Parts:
Tube (1)
Length varies for S/XL/D
TP-1000
Hardware
Bag
Tower (1)
Tube Bracket (2)
Base (1)
Supplied Hardware:
TV Hardware
Bag
Camera
Hardware
Bag
Tools required:
(Not Included)
Cam Shelf (1)
1/4" Bolt
(16)
M8 x 12
(2)
M8 x 40
(4)
M6 x 12
(2)
(S) TV Bracket (2)
(D) TV Bracket (4)
Carriage Bolt
(2)
M8 Nut
(11)
(XL) TV Bracket (2)
Washer
(6)
5/16" Nut (Black)
(2)
Cam Plate (1)
M8 Hex Key
(1)
M6 Hex Key
(1)
7/16"
Wrench
or Socket
13mm
Wrench
or Socket
Phillips
Screwdriver
VIDEO FURNITURE INTERNATIONAL
190 Don Hillock Drive Aurora , Ontario L4G 0G9 www.video-furn.com
Toll Free: 1-877-834-3876 Fax: 1-905-751-1488 Local:905-751-1459
Assembling Stand
Step 1
1) Remove M8 nuts from top of Base.
Remove the back cover of the spine
assembly with an M6 hex key. Align
the holes on the bottom of the spine
assembly with the bolts on the base
and secure in place using M8 nuts.
M8 Nut
(5)
13mm
Wrench
or Socket
Remove M8 nuts
from base before
placing tower.
Use these nuts to
secure Base to tower.
Page 2
of 5
Mounting Tube Brackets
Step 2
1)
Place the tube brackets at a
desired height and secure in place
using M8 bolts, Washers and M8 nuts.
Use inside hole locations if your TV's hole
pattern interferes with the
outside tube bracket locations.
2)
Slide the tube through the
tube brackets until centred. Secure in
place using attached tightening
bolts while ensuring that it is level.
13mm Wrench
or Socket
Brackets can
be flipped upside
down for lower
Tv Heights.
M8 x 40
(4)
Washer
(4)
M8 Nut
(4)
VIDEO FURNITURE INTERNATIONAL
190 Don Hillock Drive Aurora , Ontario L4G 0G9 www.video-furn.com
Toll Free: 1-877-834-3876 Fax: 1-905-751-1488 Local:905-751-1459
Loading...