AVF MM1232 User Manual
MM-1232
Assembly and mounting Instructions
Thank you for purchasing VFI's small-medium display mounting system.
This product was designed for tabletop mounting of a
single lcd display sized 12-32" and weighing
no more than a 60lbs.
Note:
If you cannot understand these instructions or are concerned about safety of the installation
Contact a qualified contractor or contact VFI at 1-877-834-3876.
Confirm all hardware is included before you begin assembly.
Not all hardware supplied will be used depending on the manufacturer of your display/s.
Supplied Parts:
Hardware Bag
1x
Page 1
of 2
Camera Neck 1x
Supplied Hardware:
(See Hardware Bag)
Cable Tie Mount
(2)
Cable Tie
(2)
Tools required:
Step 1
Spacer
(4)
M3 x 8
(4)
Spine 1x
5/16 Nut
(3)
1/4-20 x 3/8
(1)
4mm Hex Key
5mm Hex Key
6mm Hex Key
Wrench or Socket
1/2 inch
(1)
(1)
(1)
TV Bracket 1x
M4 x 25
(4)
M5 x 25
(4)
M6 x 25
(4)
M4 x 12
(4)
M5 x 12
(4)
M6 x 12
(4)
Clamp 1x
M4 Washer
(4)
M5 Washer
(4)
M6 Washer
(4)
Place TV Bracket over the TV's
mounting holes. Attach
using the provided bolts and Hex
key. Spacer and longer bolts may
be required if TV is not flat or inputs
are blocked.
VIDEO FURNITURE INTERNATIONAL
190 Don Hillock Drive Aurora , Ontario L4G 0G9 www.video-furn.com
Toll Free: 1-877-834-3876 Fax: 1-905-751-1488 Local:905-751-1459
Step 2
Step 3
Page 2
of 2
Feed cables for camera and TV through spine.
Use cable ties and cable tie mounts to restrain
loose cables.
Using the M6 Bolt
and Wing nut.
Tighten using 5mm
Hex Key.
Step 4
Place the spine over the grommet hole.
Then feed the cables though before tightening.
Tighten the clamp against the cart surface
using a 5/16 nut and wrench.
Step 5
Attach camera to the camera neck using
M3 bolts or 1/4-20. (depending on camera model)
(Camera and
TV hidden)
Alighn the TV and camera neck at the desired height.
Use 5/16 nuts and wrench to secure in place.
If you have any problems,questions or suggestions, we value your feedback. Toll free 1-877-834-3876
You're Done!
VIDEO FURNITURE INTERNATIONAL
190 Don Hillock Drive Aurora , Ontario L4G 0G9 www.video-furn.com
Toll Free: 1-877-834-3876 Fax: 1-905-751-1488 Local:905-751-1459
Loading...