AVF L MC1000 User Manual
MC1000-D
Assembly and mounting Instructions
Thank you for purchasing VFI's MC1000 Metal Cart.
This product was designed for video conferencing applications
and is suitable for dual 42-58" TV configurations.
Note:
If you cannot understand these instructions or are concerned about safety of the installation
Contact a qualified contractor or contact VFI at 1-877-834-3876.
Confirm all hardware is included before you begin assembly.
Not all hardware supplied will be used depending on the manufacturer of your display/s.
Page 1
of 6
Base:
Supplied Parts:
Hardware
Bag
Cart
Handle (2)
Options:
Shelf
Cam Plate (1)
Cam Arm (1)
Tube Bracket (2)
TV Bracket (4)
Cam Bracket (1)
Supplied Hardware:
M8 x 20
(8)
5-16 Carriage
Bolt (4)
Tools required:
(Not Included)
VIDEO FURNITURE INTERNATIONAL
190 Don Hillock Drive Aurora , Ontario L4G 0G9 www.video-furn.com
Toll Free: 1-877-834-3876 Fax: 1-905-751-1488 Local:905-751-1459
Spine
Assembly (1)
TV
Hardware Bag
Hardware
Lock
Washer (4)
9/16" Wrench
or Socket
Camera
Bag
5-16 Hex
Nut (8)
Tube (1)
M6 x 40
(1)
M8 x 12
(2)
M8 Hex Key
(1)
1/2" Wrench
or Socket
M6 x 12
(1)
M6 Hex Key
(1)
Attaching Handles
Step 1
Align handles with the matching
locations on the sides of the cart. Use
an M8 bolt and hex key to secure the
front side and a 1/2" wrench or socket
to secure the back side.
Page 2
of 6
Installing Spine Assembly
Step 2
Slide the spine assembly into the
locations on the top of the cart with
the large cover facing the back.
Secure in place with an M8 bolt on
each side.
1/2" Wrench
or Socket
5/16 Nut (4)
M8 Hex Key
M8 x 20
(4)
VIDEO FURNITURE INTERNATIONAL
190 Don Hillock Drive Aurora , Ontario L4G 0G9 www.video-furn.com
Toll Free: 1-877-834-3876 Fax: 1-905-751-1488 Local:905-751-1459
M8 Hex Key
M8 x 12
(2)
Loading...