Page 1
AVerMedia®
AVerDiGi EH5216/EH5108 series
EH5216+/EH5216/EH5216 Lite
EH5108+/EH5108/EH5108 Lite
AVerDiGi EH5216H/5108H series
EH5216H+/EH5216H/EH5216H Lite
EH5108H+/EH5108H/EH5108H Lite
AVerDiGi EXR5008/EXR5016 series
EXR5008+/EXR5008/EXR5008 Lite
EXR5016+/EXR5016/EXR5016 Lite
Quick Installation Guide
Page 2
Page 3
COPYRIGHT
© 2010 by AVerMedia Information, Inc. All right reserved. Reproduction without permission is
prohibited
No part of this document may be reproduced or transmitted in any form, or by any means without the
prior written permission of AVerMedia Information Inc. AVerMedia Information Inc. reserves the right
to modify its models, including their characteristics, specifications, accessories and any other
information stated herein without notice. The official printout of any information shall prevail should
there be any discrepancy between the information contained herein and the information contained in
that printout.
NOTICE
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.
THE INFORMATION CONTAINED HEREIN IS TO BE CONSIDERED FOR REFERENCE ONLY.
WARNING
TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK. DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
WARRANTY VOID FOR ANY UNAUTHORIZED PRODUCT MODIFICATION.
INFORMATION
For more information, please refer to the user manual in the software CD.
Page 4
Page 5
Table of Content
I. Package Contents ........................................................................................ 1
EH5216/EH5108 Series .............................................................................. 1
EH5216H/EH5108H Series ......................................................................... 2
Optional Accessories ................................................................................... 3
EXR5016 Series .......................................................................................... 4
Optional Accessories(EXR5016 series) ...................................................... 4
II. Hardware Installation ................................................................................... 5
A. Install the hard disk ............................................................................. 5
B. Device Connection ........................................................................... 10
EH5216/EH5216H series ................................................................. 10
EH5108/EH5108H series ................................................................. 10
EXR5016 series ............................................................................... 12
III. Using DVR System .................................................................................... 14
A. Way to Operate DVR ........................................................................ 14
B. First Time Using DVR Unit................................................................ 14
IV. Familiarizing the Buttons in Preview Mode ................................................ 16
V. Familiarizing the Buttons in Playback Mode .............................................. 18
Page 6
Page 7
I. Package Contents
EH5216/EH5108 Series
a b c
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
If there is any damage, shortage or inappropriate item in the package contents, please
contact with local dealer
(1) DVR unit
a. EH5216+/EH5108+
b. EH5216/EH5108
c. EH5216 Lite/EH5108 Lite
(2) AVerMedia Optical USB mouse
(3) Quick Installation Guide
(4) Software CD (Manual is included)
(5) Screws for internal HDD installation
(6) Power adaptor
(7) Power Cord (*The power cord may vary
according to the local electricity system.)
(8) SATA cables
EH5216 series and EH5108 series outside looking are same except the name of product
and connection of camera.
1
Page 8
a
b c
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
If there is any damage, shortage or inappropriate item in the package contents, please
contact with local dealer
(1) DVR unit
a. EH5216H+/EH5108H+
b. EH5216H/EH5108H(No DVD-ROM)
c. EH5216H Lite/EH5108H Lite
(2) AVerMedia Optical USB mouse
(3) Quick Installation Guide
(4) Software CD (Manual is included)
(5) Screws for internal HDD installation
(6) Power adaptor
(7) Power Cord (*The power cord may vary
according to the local electricity system.)
(8) SATA cables
(9) Audio cable for EH5216H series
(Red cable: 16CH audio in/White cable: 1CH
audio out/Black cable: 1CH MIC in)
(10) Audio cable for EH5108H series
(Red cable: 8CH audio in/White cable: 1CH
audio out/Black cable: 1CH MIC in)
EH5216H series and EH5108H series outside looking are same except the name of
product and connection of camera.
EH5216H/EH5108H Series
2
Page 9
Remote controller
DVI cable for EH5216/EH5216H series
(16CH Loop out)
Audio cable
(For EH5216 series)
Audio cable
(For EH5108 series)
SATA cable hard disk installation
HDD Holder
( for 4th hard disk)
IR extended cable
Rack ears
Optional Accessories
3
Page 10
a b c
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
If there is any damage, shortage or inappropriate item in the package contents, please
contact with local dealer
(1) DVR unit
a. EXR5008+/EXR5016+
b. EXR5008/EXR5016
c. EXR5008 Lite/EXR5016 Lite
(2) AVerMedia Optical USB mouse
(3) Quick Installation Guide
(4) Software CD (Manual is included)
(5) Screws for internal HDD installation
(6) Power adaptor
(7) Power Cord (*The power cord may vary
according to the local electricity system.)
(8) SATA cables
Remote controller
Audio cable
(White cable: 1CH audio out
Black cable: 1CH MIC in)
IR extended cable
Rack ears
SATA cable hard disk installation
HDD Holder
( for 4th hard disk)
90W power adaptor for 3rd and 4th
hard disk
(for EXR5008/5016 Lite only)
EXR5008/EXR5016 Series
Optional Accessories for EXR5008/EXR5016 series
4
Page 11
For hard disk spec, please referring to http://www.avermedia.com/AVerDiGi/Product/ →
Embedded Hybrid DVR/NVR → AVerDiGi EH5216 series, AVerDiGi EH5108 series ,
or Pure NVR → AVerDiGi EXR5008 series or AVerDiGi EXR5016 series → Hardware
Recommendations
EXR5008 Lite and EXR5016 Lite MUST purchase 90W adaptor for 3rd and 4th hard disk
installation.
1. Loosen all screws
2. Push the cover backward and lift
3. Loosen the screws of holder in order to take
out the hard disk rack.
4. Loosen all the screws of hard disk plate.
II. Hardware Installation
A. Install the hard disk
Hard disk installation for EH5216 series, EH5108 series, EH5216H series, EH5108H series,
EXR5008 series, and EXR5016 series are same. The following is an EH5216 Lite for an example.
Follow the illustrated instructions below to install the hard disk:
5
Page 12
5. The hard disk plate can be installed 3 hard
disks. User can choose the position and place
the hard disk on it.
6. Turn the plate and hard disk over carefully
and screw the hard disk on the plate. If hard
disk cannot match to the screw hole, then,
you may adjust the hard disk position to
match the screw hole.
7. The look of three hard disks is installed on
hard disk plate.
8. Plug the SATA cable into SATA connector on
the PC board.
Some of DVR model may not have
DVD-ROM that depends on the DVR
user has purchased.
9. Plug the power cable into hard disk
10. Plug the SATA cable into hard disk
- User can leave un-plug the SATA cable
of the left side HDD for screwing plate
inside the DVR more easily later.
These 2 SATA
connectors are
for eSATA
connector and
DVD-ROM
drive
6
Page 13
11. Screw the plate within hard disk inside the
DVR unit
12. Plug the SATA cable into the left side hard
disk.
User can adjust the step 9, 10, and 11 for easily install process if necessary.
13. If user wants to install 4th HDD, then follow the steps to continue. Otherwise, go to the last two
steps to complete the installation.
14. Place the 4th hard disk on the HDD holder.
The head side of hard disk is same side of
the screw hole of HDD holder.
15. Screw (6 screws for both side) the hard
disk on the HDD holder.
HDD holder is an optional accessory.
User need to purchase from your dealer.
16. Plug the SATA cable into SATA connector on the PC board.
7
Page 14
17. Plug the power cable into the hard disk.
18. Plug the SATA cable into the hard disk.
The SATA cable is an optional
accessory. Please purchase from your
dealer.
19. Place the HDD holder inside the DVR unit. The screw hole of HDD holder is aligning with
screw hole on the DVR unit.
20. Push the HDD holder forward and screw hole of HDD holder will match the screw hole on the
DVR unit and HDD holder should hook on the stabled hook on the DVR unit.
8
Page 15
21. Screw the HDD holder inside the DVR unit.
22. Screw the holder on the DVR unit.
23. The look of four hard disks is installed.
24. Push the cover forward and secure the
cover
25. You may now connect all the cables and power on the DVR unit.
9
Page 16
Pen drive and external hard disk must be FAT32 format.
i
All connected devices have their own power supply are necessary.
B. Device Connection
EH5216/EH5216H series
The back panel of the DVR unit, user can connect up to 16 cameras in combination of analog and IP
camera. The DVR unit also can connect 16 sensor devices, 4 alarm devices, and output video to a
TV or CRT/LCD monitor. Follow the illustration below to make the connection:
EH5108/EH5108H series
The back panel of the DVR unit, user can connect up to 8 cameras in combination of analog and IP
camera. The DVR unit also can connect 16 sensor devices, 4 alarm devices, and output video to a
TV or CRT/LCD monitor. Follow the illustration below to make the connection:
10
Page 17
EH5216+/EH5108+
EH5216H+/EH5108H+
EH5108H/EH5216H
EH5216
EH5216 Lite/EH5108 Lite
EH5216H Lite/EH5108H Lite
For backup recorded video, plugging the pen drive or external hard disk through USB port that are
located at front panel of DVR unit, and then, use the bundled software enables user to transfer,
playback and segment the video. Follow the illustration below to make the connection:
11
Page 18
EXR5008+/EXR5016+
EXR5008/EXR5016 series
The back panel of the DVR unit, user can connect up to 16 IP cameras. The DVR unit also can
connect 16 sensor devices, 4 alarm devices, and output video to a CRT/LCD monitor.
Follow the illustration below to make the connection:
For backup recorded video, plugging the pen drive or external hard disk through USB port that are
located at front panel of DVR unit, and then, use the bundled software enables user to transfer,
playback and segment the video.
Follow the illustration below to make the connection:
12
Page 19
Pen drive and external hard disk must be FAT32 format.
i
- All connected devices have their own power supply are necessary.
- EXR DVR unit can connect 16 IP cameras.
EXR5008/EXR5016
EXR5008 Lite/EXR5016 Lite
13
Page 20
For the first time using DVR unit, using mouse and keyboard to setup all configurations.
The superuser has full authority to configure and operate DVR system.
III. Using DVR System
A. Way to Operate DVR
There are three ways can be managed the DVR unit:
1. Using mouse and keyboard
Connecting the mouse and keyboard through USB interface, user can easily to management the
DVR unit. For the first time using DVR unit, mouse and keyboard is the best way to set up all
DVR relevant configurations.
2. Using Remote Controller(Optional accessory)
After DVR unit has been setup, user can use remote control to preview, playback, backup, reset
alarm, output video and so on functions.
3. Using Front Panel button(For EH5216+, EH5108+, EH5216H+, EH5108H+, EH5216H,
EH5108H, EXR5008+, and EXR5016+)
It’s an optional way to operate DVR unit. Front panel button function acts as same as remote
controller.
B. First Time Using DVR Unit
1. Connect the mouse and keyboard to DVR unit(through USB interface)
2. Power on the DVR unit.
3. For security purpose, the DVR system would require you to enter User ID and Password before it
can be accessed. When the Authorization dialog box appears, enter the ID (superuser) and
Password (111111).
After login, the main GUI as following shown:
EH5216/EH5216H series Preview UI
14
Page 21
– EH5216/EH5216H series can connect 16 cameras of analog and IP cameras
combo.
– EH5108/EH5108H series can connect 8 cameras of analog and IP cameras
combo.
– EXR5008/EXR5016 series only can connect 8/16 IP cameras.
– DVR unit doesn’t supply the power to connected external device.
4. The hard disk must be formatted before user can use it with DVR unit. Following the below steps
to format the hard disk.
a. Click Setup and enter the password
b. Click System → Add
c. Select the hard disk from device list and select Format type
d. Click Format button to start formatting
e. When formatting is done, click OK.
5. Setup the date and time in order to have correct recording time and date. Following the below
steps to setup date and time:
a. Click Setup and enter the password
b. Click System
c. In Time section, click Setting button of System Time.
d. Select the date and adjust the time, and then, click OK.
6. Connecting the camera.
To connect analog camera(EH series only):
a. Plug the analog camera video cable into DVR unit.
b. Click Setup and enter the password
c. Click Camera
d. Select camera channel and type of camera – Analog Camera
e. And then, enable the camera
f. Give a name of camera and enter short description.
g. Adjust the bright, contrast, hue, and saturation of camera
h. Click OK
To connect IP camera:
a. Click Setup and enter the password
b. Click Camera
c. Select camera channel and type of camera – IP Camera
d. And then, enable the camera
e. Click IP Setting
f. Enable Protocol, and then, select protocol, mode, video format, resolution, and
channel of IP camera.
g. Enter IP address or URL of IP camera.
h. Enter ID and password if IP camera’s access authority is required.
Click OK.
i.
15
Page 22
Name
Function
(1) Exit
Reboot: To restart the DVR system. It is required to enter the password
Power Off: To shut down the DVR system. It is required to enter the
password
Login: Using different ID to login to DVR system.
Cancel: To return to DVR application.
(2) Split Screen
Mode
Select from 6 different split screen types to view all the camera, or one
camera over the other or alongside on a single screen. It also allows you to
switch and view different camera number.
(3) Record
Start/stop video recording.
(4) EMap
Display the map in each area, and the location of camera/ sensor/ relay and
the warning.
(5) Network
Enable/disable remote system access. This feature allows you to access
DVR server from a remote location via internet connection. The default is
enabling.
(6) Setup
Configure the system settings.
(7) PTZ
Access PTZ control panel.
(8) Preview
Switch to Preview mode. This allows you to view live camera display.
(9) Playback
Switch to Playback mode. This allows you to view the recorded video file.
(10) Status bar
Display the current date, time, hard disk free space, and system
temperature.
(11) Camera ID
Show the number of cameras that are being viewed. When you are in single
screen mode, click the camera ID number to switch and view other camera.
(12) Snapshot
Capture and save the screen shot in *.jpg format.
(13) Event log
Show the record of activities that take place in the system.
IV. Familiarizing the Buttons in Preview Mode
16
Page 23
Name
Function
(14) AutoScan
Start/Stop video screen cycle switch.
(15) Full screen
View in full screen. To return, press the right button of the mouse or ESC on
the keyboard or click the arrow icon.
Click to exit from
full screen mode
When you switch to full screen in multiple-screen mode, Left click to toggle
to only display one of the video in the multiple-screen mode or all.
(16) Alarm
Alert and display warning info. Superuser and user both can reset alarm
status.
(17) Virtual
Keyboard
Click to enable virtual keyboard.
17
Page 24
Name
Function
(1) Split Screen
Mode
Select from 6 different split screen type to playback the recorded video
file of all the camera, or one camera over the other or alongside on a
single screen.
(2) Progress bar
Show the progress of the file being played. You may move the bar to seek
at any location of the track.
(3) Hour Buttons
Select and click to playback the recorded video file on the specific time
frame.
The Hour buttons represent the time in 24-hour clock. The blue bar on top of the hour
button indicates that there is a recorded video file on that period of time. While the red
bar indicates that you are currently viewing the recorded video file.
(4) Playback
Control Buttons
Begin: Move at the beginning of the recorded video file.
Previous: Go back to the previous frame.
Slower: Play the recorded video file at the speed of 1/2X, 1/4X, 1/8X,
1/16X, or 1/32X
Rewind: Wind back the recorded video file.
Pause: Briefly stop playing the recorded video file.
Play: Play the recorded video file.
Faster: Play the recorded video file at the speed of 2X, 4X, 8X, 16X, 32X,
or 64X.
Next: Go to the next frame.
End: Go to the end of the recorded video file.
V. Familiarizing the Buttons in Playback Mode
To switch in Playback mode, click Playback button at the lower right corner of Preview mode user
interface.
18
Page 25
Name
Function
(5) Date
Select the date on the calendar and the time from 00 to 23 to where to
start playing the recorded video file.
The numbers from 00 to 23 represent the time in 24-hour clock. The numbers from 01
to 16 represent the camera ID. The blue colored column indicates that there is a
recorded video file on that period of time. While the red colored column indicates on
where to start playing the recorded video file.
(6) Preview
Switch to Preview mode.
(7) Playback
Switch to Playback mode to view the recorded video file.
(8) Status bar
Display the recorded date, time and play speed.
(9) Camera ID
Show the number of cameras that are being viewed. When you are in
single screen mode, click the camera ID number to switch and view other
camera.
(10) Export
Export includes Snapshot, Output Video Clip, and Backup function.
Snapshot: Capture and save the screen shot in *.jpg format.
Output Video Clip: Save the segmented file in *.dvr format to
external USB storage device.
Backup: Save the playback file to USB device or DVD disk
(11) Segment
Keep a portion of the recorded video.
1. Use the Playback Control buttons or drag the bar on the playback
progress bar and pause on where you want to start the cut. Then,
click Segment to set the begin mark.
2. Use the Playback Control buttons or drag the bar on the playback
progress bar and pause on where you want to end the cut. Then,
click Segment to set the end mark. To cancel segmentation or set
the segment marks from the start, click Segment button again.
3. Click Export button → Output Video Clip to save the video
segment to the USB storage device.
(12) Full screen
View in full screen. To return, press the right button of the mouse or ESC
on the keyboard or click the arrow icon.
When you switch to full screen in multiple-screen mode, Left click to
toggle to only display one of the video in the multiple-screen mode or all.
(13) Event log
Show the record of activities that take place in the system. To filter the
records, select and click the option button to only display Event, System,
Operation, Network or All.
(14) Bookmark
Mark a reference point when reviewing the recorded video file to which
you may return for later reference.
1. Click Bookmark button
2. In the Bookmark dialog box, you may do the following:
- Add to create the new reference mark in the bookmark list.
- Edit to change the mark description.
- Delete to remove the selected reference mark in the list.
- Delete All to remove all the reference marks in the list.
- Exit to close Bookmark dialog box.
3. Select and click one in the bookmark list to review the file.
19
Page 26
Name
Function
(15) Visual Search
Search from a specific camera by Date, Hour, Minute, 10 Seconds and
Second.
1. Click Visual Search.
2. In the Visual Search Setting dialog box, select the Camera number
and the date. Then click OK.
3.
When a series of frames appear by date, click on the frame to display
another series of frames and search by every Hour of that date, every
Minutes of that hour, and every Seconds of that minute. Using
and to go next and last page of time page. To go back last time
selection (hour, minute, or second), click . To close event
search, click . Click to select different date of video for
visual search.
4.
On the time second screen, click the channel and playback button will
appear. Click playback button to playback the selected channel video
frame.
(16) Find Next
Search for the next event or changes in the motion detector frame. You
can use this when you are using Event Search function.
(17) Event Search
Search from the recorded activities that were recorded in event log (i.e.,
Sensor, Motion, Video Loss).
(18) De-interlace
To enhance the video quality. Set the de-interlace mode to #1, if you are
capturing motionless picture and #2, if it captures lots of movement.
20
Page 27
P/N: 300AF2X8-DD9
April 2010
Loading...