Avaya BayRS Routers and Protocols User Manual

Documentation Roadmap

for Configuring BayRS

Routers and Protocols

What do
services so you can customize and manage your network. This roadmap provides an overview of the
documentation set followed by a brief description of each manual and a link to it.

To navigate around the roadmap, click on any box. To open a specific manual, click on the name of the
manual (shown in italics).

you

want your

Locating BayRS
Documentation

Installing

Configuring

router

to be? Whatever it is, Nortel Networks offers dozens of protocols and

Hard copy, CD, and

Web documents

Release notes

Configuration tools

Installation guides

Line services

Managing and

Troubleshooting

WAN protocols

IP protocols

IBM protocols

Managing routers

Security

LAN protocols

ATM protocols

Troubleshooting

Documentation Roadmap (308665-14.20 Rev 00) 1

Where to Locate BayRS Documentation

Your router comes with several hard-copy documents including the installation guide, release
notes, known anomalies, and fixed anomalies. Other documents for configuring and managing
your router come on a CD called the Online Library. This CD comes with a manual that describes
how to install the online library and provides an overview of the library’s features. You can view
the library on a PC, UNIX, or Macintosh platform.

All manuals (except the known anomalies and fixed anomalies documents) are also available on
the Web at http://www25.nortelnetworks.com/library/tpubs/

Back to Roadmap

Release notes

Read the following release notes for the latest hardware and software information:

the BCC

Notes for Site

Manager

Known Anomalies Fixed AnomaliesNotes for BayRS and

Release Notes for BayRS

These release notes provide information about the latest version of BayRS. They include
information about new features, upgrading your software, general guidelines, BCC guidelines, and
operating limitations. The release notes also include information about supported protocols,
standards, and flash memory cards.

Back to Roadmap

Release Notes for Site Manager

These release notes provide information about the latest version of Site Manager. They include
information about compatibility with BayRS, system requirements, and general guidelines.

Back to Roadmap

BayRS, BCC, and Site Manager Known Anomalies

This hard-copy document lists the known anomalies (also referred to as bugs, change requests, or
CRs) that were found in the latest version of BayRS, the BCC, and Site Manager.

Back to Roadmap

BayRS, BCC, and Site Manager Fixed Anomalies

This hard-copy document lists the fixed anomalies (also referred to as bugs, change requests, or
CRs) that were fixed in the latest version of BayRS, the BCC, and Site Manager.

Back to Roadmap

2 Documentation Roadmap (308665-14.20 Rev 00)

Installation

Refer to the appropriate installation guide to install your router and then read Quick-Starting
Routers to connect it to a network.

Hardware

Installation Guides

Quick-Starting

Routers

ASN Routers AN and ARN Remote

Access

Hardware Installation Guides

The following manuals describes how to install, configure, and maintain BayRS routers.
For information about a specific platform, click on the appropriate title.

• Installing and Maintaining BN Platforms

• Installing and Maintaining ASN Routers and BNX Platforms

• Installing and Operating AN and ANH Routers

• Installing and Operating ARN Routers

• Quick Installation and Reference for the System 5000 Net Modules

• Installing and Operating the Passport 5430 Multiservice Access Switch

• Installing and Operating the Passport 2430 Multiservice Access Switch

• Cable Guide -- This guide lists the specific cables for your Nortel Networks router. If you need
to meet special requirements, this guide also provides the pinout information and references to
the industry specifications and standards so that you can build your own cables.

Back to Roadmap

Quick-Starting Routers

This manual describes how to boot your router locally and configure its initial interface to an IP
network. When you complete the quick-start installation procedure, the router will route IP traffic
on your network. This manual also describes how to install Site Manager and provides an
overview of BayRS security features.

Back to Roadmap

Connecting ASN Routers to a Network

This manual describes how to boot an Access Stack Node (ASN) router over a network interface to
connect it to a network.

Back to Roadmap

Configuring AN and ARN Remote Access

This manual describes how to connect Access Node (AN), Access Node Hub (ANH), and
Advanced Remote Node (ARN) routers to corporate backbone networks.

Back to Roadmap

Documentation Roadmap (308665-14.20 Rev 00) 3

Configuration tools

Three configuration tools support BayRS: the BCC, Site Manager, and the Technician Interface.
Nortel Networks recommends using either the BCC or Site Manager. In most cases, you can use
either tool to configure your router.

The Technician Interface is for experienced network administrators. Nortel Networks recommends
using the Technician Interface for troubleshooting only because it provides limited support for
configuring protocol parameters. It also does not verify configuration files or check them for
consistency before allowing you to save them.

Click on any configuration tool for a more detailed description:

BCC Site Manager Technician Interface

Bay Command Console (BCC)

This section describes the two BCC manuals: a user guide and a quick reference.

Using the Bay Command Console (BCC)

The BCC is the Nortel Network command-line interface for configuring routers. This manual
explains how to use all the BCC commands, and provides a tutorial that guides you through the
initial configuration of a Nortel Networks router. You can use the BCC to perform tasks such as
creating or deleting IP interfaces on the router.

Back to Configuration Tools

Back to Roadmap

BCC Quick Reference

This quick reference provides experienced users with a sample configuration, a table of the most
commonly used BCC commands, and helpful shortcuts and tips.

Back to Configuration Tools

Back to Roadmap

4 Documentation Roadmap (308665-14.20 Rev 00)

Site Manager

Configuring and Managing Routers with Site Manager

Site Manager is a graphical user interface (GUI) for configuring routers. This manual describes
how to create configuration files, customize software images, manage configuration files, and
monitor router performance.

You can use Site Manager on a PC or a UNIX workstation and integrate it with many popular
Simple Network Management Protocol (SNMP) applications, such as the Hewlett-Packard
OpenView Network Node Manager.

Back to Configuration Tools

Back to Roadmap

Technician Interface

The three manuals in this section document the Technician Interface, which resides in the router’s
operating system kernel. The Technician Interface automatically loads when you boot the router.
You can establish a session through the router’s console port, through a local ASCII terminal, or a
dial-up connection.

Using Technician Interface Software

The Technician Interface is a command-line interface for configuring routers. This manual
explains how to use the Technician Interface to install a router, maintain or diagnose router
operation, and monitor and configure certain basic router functions.

Back to Configuration Tools

Back to Roadmap

Using Technician Interface Scripts

Technician Interface scripts enable you to view and use information stored in the management
information base (MIB). This manual describes how to use the script commands (
and enable/disable) to display statistical and configuration information about router services, and to
enable or disable those services.

Back to Configuration Tools

Back to Roadmap

show/monitor

Writing Technician Interface Scripts

Technician Interface scripts enable network administrators to read and execute Technician
Interface commands from a remote workstation and transfer the files to the router via TFTP or
XMODEM. This manual describes how to write your own Technician Interface scripts, which are
very similar to UNIX shell scripts.

Back to Configuration Tools

Back to Roadmap

Documentation Roadmap (308665-14.20 Rev 00) 5

Security

Depending on your security needs, you can configure your router with one or more of the
following security services and protocols.

• FireWall-1 protects data on your router from unauthorized users.

• IPsec protects data while it travels over public networks.

• L2TP protects data by creating a virtual private network (VPN).

• RADIUS protects data by authorizing remote users before giving them access to a network.

Click on any of the following security services for a more detailed description:

FireWall

IPsec L2TP RADIUS

Configuring BaySecure FireWall-1

BaySecure FireWall-1 integrates firewall security features into the operating system of Nortel
Networks BN, ASN, and ARN routers. BaySecure FireWall-1 is a firewall only, and does not
include the entire suite of Check Point Software Technologies features. BaySecure FireWall-1
supports the inspection module and logging capabilities of the Check Point FireWall-1 product.
This manual describes how to configure FireWall-1 services on a Nortel Networks router.

Back to Security

Back to Roadmap

Configuring IPsec Services

The IP Security (IPsec) standards were developed to ensure secure, private communications for
the remote access, extranet, and intranet virtual private networks (VPNs) used in enterprise
communications. This manual describes how to configure IPsec services on a Nortel Networks
router.

Back to Security

Back to Roadmap

6 Documentation Roadmap (308665-14.20 Rev 00)

Configuring L2TP Services

Layer 2 Tunneling Protocol (L2TP) provides remote users, such as telecommuters, mobile
professionals, and personnel in remote branch offices, with dial-in access to a corporate network.
L2TP enables users to create a virtual private network (VPN) over a public network, such as the
Internet, but offers the security and exclusivity of a private network. This manual describes how to
configure L2TP services on a Nortel Networks router.

Back to Security

Back to Roadmap

Configuring RADIUS

Remote Authentication Dial-In User Service (RADIUS) centralizes security and controls the
billing of services. RADIUS authentication identifies remote users before you give them access
to a central network site. RADIUS accounting collects data during a remote user’s dial-in session
so that you can determine billing charges. This manual describes how to configure RADIUS
services on a Nortel Networks router.

Back to Security

Back to Roadmap

Documentation Roadmap (308665-14.20 Rev 00) 7

LAN protocols

Nortel Networks supports the following LAN protocols. Click on any of the following for a
description:

AppleTalk Bridging DECnet IPX

OSI VINES XNS

Configuring AppleTalk Services

This manual describes how to configure AppleTalk services on a Nortel Networks router.

Back to LAN Protocols

Back to Roadmap

Configuring Bridging Services

This manual includes information on the following topics: transparent bridges, source routing
bridges, NetBIOS, translation bridges, native mode LANs, and spanning trees. This manual
describes how to configure bridging services on a Nortel Networks router.

Back to LAN Protocols

Back to Roadmap

Configuring DECnet Services

This manual describes how to configure DECnet services on a Nortel Networks router.

Back to LAN Protocols

Back to Roadmap

Configuring IPX Services

This manual describes how to configure Internetwork Packet Exchange (IPX) services on a Nortel
Networks router.

Back to LAN Protocols

Back to Roadmap

Configuring OSI Services

This manual describes how to configure Open Systems Interconnection (OSI) services on a Nortel
Networks router.

Back to LAN Protocols

Back to Roadmap

8 Documentation Roadmap (308665-14.20 Rev 00)