Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
M240HW01 V8
( ) Preliminary Specification
( V) Final Specification
Module 24” Color TFT-LCD
Model Name M240HW01 V8
Customer Date
Approved by
Approved by Date
Frankie Wang
Prepared by
2011/7/01
Note: This Specification is subject to
change without notice.
document version 0.1 1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
CJH
Desktop Display Business Group /
AU Optronics corporation
2011/7/01
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
Contents
M240HW01 V8
1.0 Handling Precautions............................................................. 4
2.0 General Description ............................................................... 5
2.1 Display Characteristics.................................................................................................................... 5
2.2 Optical Characteristics ....................................................................................................................6
3.0 Functional Block Diagram .................................................... 10
4.0 Absolute Maximum Ratings......................................................... 11
4.1 TFT LCD Module..............................................................................................................................11
4.2 Backlight Unit.................................................................................................................................... 11
4.3 Absolute Ratings of Environment ...................................................................................................... 11
5.0 Electrical characteristics...................................................... 12
5.1 TFT LCD Module............................................................................................................................ 12
5.1.1 Power Specification.............................................................................................. 12
5.1.2 Signal Electrical Characteristics.............................................................................. 13
5.2 Backlight Unit.................................................................................................................................... 15
6.0 Signal Characteristic............................................................ 16
6.1 Pixel Format Image........................................................................................................................16
6.2 The input data format .................................................................................................................... 17
6.3 Signal Description..........................................................................................................................18
6.4 Timing Characteristics ....................................................................................................................... 21
6.5 Timing diagram...............................................................................................................................22
6.6 Power ON/OFF Sequence ...........................................................................................................23
7.0 Connector & Pin Assignment ............................................... 24
7.1 TFT LCD Module............................................................................................................................ 24
7.1.1 Pin Assignment ................................................................................................... 24
7.2 Connector on Backlight Unit.............................................................................................................. 26
7.2.1 Pin assignment ................................................................................................... 26
8.0 Reliability Test..................................................................... 27
9.0 Shipping Label ..................................................................... 28
10.0 Mechanical Characteristics ................................................ 29
11. Packing Specification........................................................... 32
document version 0.1 2
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
M240HW01 V8
AU OPTRONICS CORPORATION
Record of Revision
Version and Date Page Old description New Description Remark
0.1
2011/03/15
0.2
2011/6/24
12 2D/3D switch voltage define remove
First Version
20,26 Pin1 : 2D/3D switch Pin1 : NC
document version 0.1 3
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
M240HW01 V8
1.0 Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth
when handling.
7) Do not open or modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) In case if a Module has to be put back into the packing container slot after once it was taken
out from the container, do not press the center of the LED lightbar edge. Instead, press at the
far ends of the LED light bar edge softly. Otherwise the TFT Module may be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the
Interface Connector of the TFT Module.
11) After installation of the TFT Module into an enclosure, do not twist nor bend the TFT Module
even momentary. At designing the enclosure, it should be taken into consideration that no
bending/twisting forces are applied to the TFT Module from outside. Otherwise the TFT
Module may be damaged.
12) Small amount of materials having no flammability grade is used in the LCD module. The LCD
module should be supplied by power complied with requirements of Limited Power Source
(IEC60950 or UL1950), or be applied exemption.
13) Pls avoid touching COF position while you are doing mechanical design
14) When storing modules as spares for a long time, the following precaution is necessary:
Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep
the temperature between ˈˈˈˈккккʳ ˴˷ʳˆˈ
ʳ ˴˷ʳˆˈккккʳ ˴ʳ˴˿ʳ˻˼˷˼ˁ
ʳ ˴˷ʳˆˈʳ ˴˷ʳˆˈ
ʳ ˴ʳ˴˿ʳ˻˼˷˼ˁ
ʳ ˴ʳ˴˿ʳ˻˼˷˼ˁʳ ˴ʳ˴˿ʳ˻˼˷˼ˁ
document version 0.1 4
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
M240HW01 V8
2.0 General Description
This specification applies to the 24 inch-FHD Color a-Si TFT-LCD Module M240HW01. The
display supports the FHD - 1920(H) x 1080(V) screen format and 16.7M colors (RGB 6-bits +
Hi-FRC data). The light source of this TFT-LCD module is W-LED. All input signals are 4-channel
LVDS interface and this module doesn’t contain a driver for backlight.
2.1 Display Characteristics
The following items are characteristics summary on the table under 25к condition:
ITEMS Unit SPECIFICATIONS
Screen Diagonal [mm] 609.7(24.0”)
Active Area [mm] 531.36 (H) x 298.89 (V)
Pixels H x V 1920(x3) x 1080
Pixel Pitch [um] 276.75 (per one triad) ×276.75
Pixel Arrangement R.G.B. Vertical Stripe
Display Mode TN Mode, Normally White
White Luminance ( Center ) [cd/m2]
350 cd/m
Contrast Ratio 1000 (Typ.)
Optical Response Time [msec] 5ms (Typ., on/off)
Nominal Input Voltage VDD [Volt] +5.0 V (Typ)
Power Consumption
(VDD line + LED line)
[Watt] PCBA:7.25W
BL : 19.71W
Weight [Grams] 2200 Typ.
Physical Size [mm] 556.0(H)x323.2(V)x14.4(D)
Electrical Interface 4 channel LVDS
Support Color 16.7M colors (RGB 6-bit + Hi_FRC )
Surface Treatment Anti-Glare, 3H
Temperature Range
Operating
Storage (Shipping)
o
[
C]
o
[
C]
0 to +50
-20 to +60
RoHS Compliance RoHS Compliance
TCO Compliance TCO 5.1 Compliance
2
(Typ.)
document version 1.4 5
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25к:
Item Unit Conditions Min. Typ. Max. Note
Viewing Angle [degree]
Contrast ratio Normal Direction
Response Time [msec]
Horizontal (Right)
CR = 10 (Left)
75
75
Vertical (Up)
CR = 10 (Down)
70
70
600
Raising Time (TrR)
Falling Time (TrF)
Raising + Falling
Red x
-
-
-
0.620 0.650 0.680
M240HW01 V8
85
85
80
80
1000 -
3.5 7.4
1.5 2.6
5 10
-
-
-
2
-
3
4
Color / Chromaticity
Coordinates (CIE)
Color Coordinates (CIE) White
Red y
Green x
Green y
Blue x
Blue y
White x
White y
0.299 0.329 0.359
0.301 0.331 0.361
0.592 0.622 0.652
0.121 0.151 0.181
0.023 0.053 0.083
0.283 0.313 0.343
0.299 0.329 0.359
Central Luminance [cd/m2] 300 350 - 6
Luminance Uniformity
Crosstalk (in 60Hz)
Flicker
[%]
[%]
dB
75 80
-
1.5 8
-20
5
7
9
document version 1.4 6
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
M240HW01 V8
Note 1: Measurement method
The LCD module should be stabilized at given temperature for 30 minutes to avoid abrupt
temperature change during measuring (at surface 35
. In order to stabilize the luminance, the
measurement should be executed after lighting Backlight for 30 minutes in a stable, windless and
dark room. ʳ
Photo detector
Measured distance
-
Note 2: Definition of viewing angle measured by ELDIM (EZContrast 88)
Viewing angle is the measurement of contrast ratio Њ10, at the screen center, over a 180°
horizontal and 180° vertical range (off-normal viewing angles). The 180° viewing angle range is
broken down as follows; 90° (θ) horizontal left and right and 90° (Φ) vertical, high (up) and low
(down). The measurement direction is typically perpendicular to the display surface with the screen
rotated about its center to develop the desired measurement viewing angle.
Center of the screen
document version 1.4 7
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
M240HW01 V8
Note 3: Contrast ratio is measured by TOPCON SR-3
Note 4: Definition of Response time measured by Westar TRD-100A
The output signals of photo detector are measured when the input signals are changed from “Full
Black” to “Full White” (rising time, T
), and from “Full White” to “Full Black” (falling time, TrF),
rR
respectively. The response time is interval between the 10% and 90% (1 frame at 60 Hz) of
amplitudes.
%
Optical
Optical
response
response
100
100
90
10
10
%
White Black
0
0
T
rF
Black
1 Frame 1 Frame
T
rR
White
T
+ TrF = 5 msec (typ.).
rR
Note 5: Color chromaticity and coordinates (CIE) is measured by TOPCON SR-3
Note 6: Central luminance is measured by TOPCON SR-3
Note 7: Luminance uniformity of these 9 points is defined as below and measured by
TOPCON SR-3
Uniformity =
9)-(1 points 9in LuminanceMinimum
9)-(1 Points 9in LuminanceMaximum
document version 1.4 8
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
L
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
Note 8: Crosstalk is defined as below and measured by TOPCON SR-3
CT = | YB – YA | / YA 100 (%)
Where
YA = Luminance of measured location without gray level 0 pattern (cd/m2)
YB = Luminance of measured location with gray level 0 pattern (cd/m2)
M240HW01 V8
Note 9: Test Patern: Subchecker Pattern measured by TOPCON SR-3
BRGB
G
R
Gray Level = L127
R GBRGB
RGBRGB
Gray Level = L0
Method: Record dBV & DC value with TRD-100
Amplitude
DC
AC
Time
Hz) 30Level(at AC
log20(dB)Flicker =
evel DC
document version 1.4 9
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
g
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
M240HW01 V8
3.0 Functional Block Diagram
The following diagram shows the functional block of the 24.0 inch Color TFT-LCD Module:
LVDS
+5V
Connector
Receiver
Connector
Converter
LVDS
DC/DC
AUO
ASIC
Timing
Controller
miniLVDS
Transmitter
Gamma
Correction
G1080
G1
Y-Driver IC
TFT-LCD
1920(x3) x 1080
Pixels
D1
-
D5760
LED
Backli
ht
I/F PCB Interface:
185132-15021/P-two
Mating Type:
12507HS-15L/Yeon Ho
I/F + X-PCB
DC
LED Driver on system
document version 1.4 10
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
4.0 Absolute Maximum Ratings
Absolute maximum ratings of the module are as following:
4.1 TFT LCD Module
Item Symbol Min Max Unit Conditions
Logic/LCD Drive
Voltage
4.2 Backlight Unit
Item Symbol Min Max Unit Conditions
LED Current ILED
4.3 Absolute Ratings of Environment
Item Symbol Min. Max. Unit Conditions
VDD 0 6.0 [Volt] Note 1,2
- 120
M240HW01 V8
[mA] Note 1,2
Operating Temperature TOP 0 +50 [oC] Note 3
Glass surface temperature
(operation)
Operation Humidity HOP 5 90 [%RH]
Storage Temperature TST -20 +60 [oC]
Storage Humidity HST
Note 1: With in Ta (25к)
Note 2: Permanent damage to the device may occur if exceeding maximum values
Note 3: Temperature and relative humidity range are shown as the below figure.
1. 90% RH Max ( Taʳ Љˆˌкʼʳ
2. Max wet-bulb temperature at 39кʳ ʳ˿˸ˁʳʻʳ˧˴ʳ Љˆˌкʼʳ
ʳʳʳʳʳʳʳʳˆˁʳˡʳ˶˷˸˴˼ʳ
Note 4: Function Judged only
TGS 0 +65 [
5 90
o
C] Note 3, Note 4
Note 3
[%RH]
Operating Range
document version 1.4 11
Storage Range
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
M240HW01 V8
AU OPTRONICS CORPORATION
5.0 Electrical characteristics
5.1 TFT LCD Module
5.1.1 Power Specification
Input power specifications are as following:
Symbol Parameter Min Typ Max Unit Conditions
5.5
1.74
[Volt] +/-10%
[A]
VDD= 5.0V,All Black Pattern,
At 120Hz
VDD= 5.0V,All Black Pattern,
At 120Hz
VDD LCD Drive Voltage
IDD Input Current
PDD
VDD Power
IRush Inrush Current
4.5
-
-
-
5.0
1.45
7.25 8.7 [Watt]
- 3 [A] Note 1
VDDrp
Allowable Logic/LCD
Drive Ripple Voltage
-
INote 1: Measurement conditions:
The duration of rising time of power input is 470us.
- 500 [mV] p-p
VDD= 5.0V, All Black Pattern
At 120Hz
document version 1.4 12
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
M240HW01 V8
AU OPTRONICS CORPORATION
5.1.2 Signal Electrical Characteristics
Input signals shall be low or Hi-Z state when VDD is off. Please refer to specifications of
SN75LVDS82DGG (Texas Instruments) in detail.
1. DC Characteristics of each signal are as following:
Symbol Parameter Min Typ Max Units Condition
VTH
VTL
ūVIDū Input Differential Voltage 100 - 600 [mV] Note 1
VCM
Differential Input High
Threshold
Differential Input Low
Threshold
Differential Input Common
Mode Voltage
- - +100 [mV]
-100 - - [mV]
+1.0 +1.2 +1.5 [V]
= 1.2V
V
CM
Note 1
= 1.2V
V
CM
Note 1
V
= 200MV (max)
TH-VTL
Note 1
Note 1: LVDS Signal Waveform
document version 1.4 13
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
q
x
r
V
t
www.panelook.com
2. AC Characteristics
Description Symbol Min Max Unit Note
Maximum deviation of input
clock frequency during SSC
Maximum modulation frequency
of input clock during SSC
Fre
Fma
Fcente
Product Specification
AU OPTRONICS CORPORATION
FDEV -
FMOD - 200 KHz
3
%
M240HW01 V8
Fcenter * FDE
Fmin
1
F
MOD
< Spread Spectrum>
ime
document version 1.4 14
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
M240HW01 V8
AU OPTRONICS CORPORATION
5.2 Backlight Unit
Parameter guideline for LED driving is under stable conditions at 25к (Room Temperature):
Symbol Parameter Min.
IR
LED Operation Current - 110
LED
VLB
P
BLU Power consumption (for reference)
BLU
LT
LED life Time (Typical)
LED
Light Bar Operation Voltage
(for reference)
Note 1 :The specified current is input LED chip 100% duty current.
Note 2 : The value showed in the table is one light bar’s operation voltage.
Note 3 : Definition of life time : brightness becomes 50% of its original value. The minimum life time of LED unit is on the
condition of IR
= 110mA and 25±2к(Room temperature).
LED
Note 4: Each LED light bar consists of 56 pcs LED package ( 4 strings x 14 pcs / string ).
Typ. Max. Unit Note
120
42 44.8 47.6
[mA]
Note 1
[Volt]
Note 2
- 19.71 22.85 [Watt]
30,000 -- -
[Hour]
Note 3
Operating with fixed
driving current
document version 1.4 15
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
M240HW01 V8
AU OPTRONICS CORPORATION
6.0 Signal Characteristic
6.1 Pixel Format Image
Following figure shows the relationship of the input signals and LCD pixel format.
document version 1.4 16
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
6.2 The input data format
M240HW01 V8
document version 1.4 17
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
M240HW01 V8
6.3 Signal Description
The module using one LVDS receiver SN75LVDS82(Texas Instruments). LVDS is a
differential signal technology for LCD interface and high speed data transfer device. LVDS
transmitters shall be SN75LVDS83(negative edge sampling). The first/third LVDS
port(RxOxxx) transmits odd pixels while the second/fourth LVDS port(RxExxx) transmits
even pixels.
Pin number Signal name Description
1 RxO1CN0 F path_ Negative LVDS differential data input (Odd data)
2 RxO1CP0 F path_ Positive LVDS differential data input (Odd data)
3 RxO1CN1 F path_ Negative LVDS differential data input (Odd data)
4 RxO1CP1 F path_ Positive LVDS differential data input (Odd data)
5 RxO1CN2 F path_ Negative LVDS differential data input (Odd data)
6 RxO1CP2 F path_ Positive LVDS differential data input (Odd data)
7 GND Power Ground
8 RxO1CCLKN F path_ Negative LVDS differential clock input (Odd clock)
9 RxO1CCLKP F path_ Positive LVDS differential clock input (Odd clock)
10 GND Power Groundʳ
11 RxO1CN3 F path_ Negative LVDS differential data input (Odd data)
12 RxO1CP3 F path_ Positive LVDS differential data input (Odd data)
13 GND ʳ Power Ground
14 RxE2CN0 F path_ Negative LVDS differential data input (Even data)
15 RxE2CP0 F path_ Positive LVDS differential data input (Even data)
16 RxE2CN1 F path_ Negative LVDS differential data input (Even data)
17 RxE2CP1 F path_ Positive LVDS differential data input (Even data)
18 RxE2CN2 F path_ Negative LVDS differential data input (Even data)
19 RxE2CP2 F path_ Positive LVDS differential data input (Even data)
20 GND Power Groundʳ
21 RxE2CCLKN F path_ Negative LVDS differential clock input (Even clock)
22 RxE2CCLKP F path_ Positive LVDS differential clock input (Even clock)
23 GND Power Groundʳ
24 RxE2CN3 F path_ Negative LVDS differential data input (Even data)
25 RxE2CP3 F path_ Positive LVDS differential data input (Even data)
26 GND Power Groundʳ
27 RxO3CN0 B path_ Negative LVDS differential data input (Odd data)
28 RxO3CP0 B path_ Positive LVDS differential data input (Odd data)
29 RxO3CN1 B path_ Negative LVDS differential data input (Odd data)
30 RxO3CP1 B path_ Positive LVDS differential data input (Odd data)
31 RxO3CN2 B path_ Negative LVDS differential data input (Odd data)
32 RxO3CP2 B path_ Positive LVDS differential data input (Odd data)
document version 1.4 18
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
M240HW01 V8
AU OPTRONICS CORPORATION
33 GND Power Groundʳ
34 RxO3CCLKN B path_ Negative LVDS differential clock input (Odd clock)
35 RxO3CCLKP B path_ Positive LVDS differential clock input (Odd clock)
36 GND Power Groundʳ
37 RxO3CN3 B path_ Negative LVDS differential data input (Odd data)
38 RxO3CP3 B path_ Positive LVDS differential data input (Odd data)
39 GND Power Groundʳ
40 RxE4CN0 B path_ Negative LVDS differential data input (Even data)
41 RxE4CP0 B path_ Positive LVDS differential data input (Even data)
42 RxE4CN1 B path_ Negative LVDS differential data input (Even data)
43 RxE4CP1 B path_ Positive LVDS differential data input (Even data)
44 RxE4CN2 B path_ Negative LVDS differential data input (Even data)
45 RxE4CP2 B path_ Positive LVDS differential data input (Even data)
46 GND Power Groundʳ
47 RxE4CCLKN B path_ Negative LVDS differential clock input (Even clock)
48 RxE4CCLKP B path_ Positive LVDS differential clock input (Even clock)
49 GND Power Groundʳ
50 RxE4CN3 B path_ Negative LVDS differential data input (Even data)
51 RxE4CP3 B path_ Positive LVDS differential data input (Even data)
VDD
Pin number Signal name Description
1 NC Do not connect (for AUO test only.)
2 NC Do not connect (for AUO test only.)
3 NC Do not connect (for AUO test only.)
4 GND Power Ground
5 GND Power Ground
6 GND Power Ground
7 GND Power Ground
8 NC Do not connect (for AUO test only.)
9 NC Do not connect (for AUO test only.)
10 GND Power Ground
11 VDD Power +5V
12 VDD Power +5V
13 VDD Power +5V
14 VDD Power +5V
15 VDD Power +5V
Note1: Start from left side
document version 1.4 19
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
M240HW01 V8
Note2: Input signals of odd and even clock shall be the same timing.
document version 1.4 20
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
M240HW01 V8
6.4 Timing Characteristics
Basically, interface timing described here is not actual input timing of LCD module but close to
output timing of SN75LVDS82DGG (Texas Instruments) or equivalent.
Item Symbol Min Typ Max Unit
Data CLK
Tclk
32
75.9
98
<Note 2>
[MHz]
Period Th 510 560 600 [Tclk]
H-section
Display Area Tdisp(h) 480 480 480 [Tclk]
Blanking
Tblk(h)
30
<Note 2>
80 120 [Tclk]
Period Tv 1088 1130 1715 [Th]
V-section
Display Area Tdisp(v) 1080 1080 1080 [Th]
Blanking
Frame Rate
Note1 : DE mode only
Note2 : OD function turn off
Tblk(v)
8 50 635 [Th]
F 50 - 120 [Hz]
document version 1.4 21
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
6.5 Timing diagram
Product Specification
M240HW01 V8
AU OPTRONICS CORPORATION
document version 1.4 22
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
M240HW01 V8
AU OPTRONICS CORPORATION
6.6 Power ON/OFF Sequence
VDD power and lamp on/off sequence are as follows. Interface signals are also shown in the
chart. Signals from any system shall be Hi-Z state or low level when VDD is off.
Note 1: Insert a black pattern
Note 2: Insert a white pattern after valid data and last until VDD falls to 10%
Value
Parameter
Min. Max.
T1 0.5 10 [msec]
T2 0 50 [msec]
T3 500 - [msec]
T4 200 - [msec]
T5 40 - [msec]
T6 1000 - [msec]
Unit
document version 1.4 23
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
M240HW01 V8
7.0 Connector & Pin Assignment
Physical interface is described as for the connector on module. These connectors are capable of
accommodating the following signals and will be following components.
7.1 TFT LCD Module
LVDS
Connector Name / Designation Interface Connector / Interface card
Manufacturer JAE or compatible
Type Part Number FI-RE51S-HF
Mating Housing Part Number JAE FI-RE51HL
VDD
Connector Name / Designation Interface Connector / Interface card
Manufacturer P-TWO or compatible
Type Part Number 185132-15021
Mating Housing Part Number Yeon-Ho 12507HS-15L
7.1.1 Pin Assignment
LVDS
Pin number Signal name Pin number Signal name
1 RxO1CN0 26 GND
2 RxO1CP0 27 RxO3CN0
3 RxO1CN1 28 RxO3CP0
4 RxO1CP1 29 RxO3CN1
5 RxO1CN2 30 RxO3CP1
6 RxO1CP2 31 RxO3CN2
7 GND 32 RxO3CP2
8 RxO1CCLKN 33 GND
9 RxO1CCLKP 34 RxO3CCLKN
10 GND 35 RxO3CCLKP
11 RxO1CN3 36 GND
12 RxO1CP3 37 RxO3CN3
13 GND 38 RxO3CP3
document version 1.4 24
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
14 RxE2CN0 39 GND
15 RxE2CP0 40 RxE4CN0
16 RxE2CN1 41 RxE4CP0
17 RxE2CP1 42 RxE4CN1
18 RxE2CN2 43 RxE4CP1
19 RxE2CP2 44 RxE4CN2
20 GND 45 RxE4CP2
21 RxE2CCLKN 46 GND
22 RxE2CCLKP 47 RxE4CCLKN
23 GND 48 RxE4CCLKP
24 RxE2CN3 49 GND
25 RxE2CP3 50 RxE4CN3
51 RxE4CP3
M240HW01 V8
VDD
Pin number Signal name Pin Signal name
1 NC 9 NC
2 NC 10 GND
3 NC 11 VDD
4 GND 12 VDD
5 GND 13 VDD
6 GND 14 VDD
7 GND 15 VDD
8 NC
document version 1.4 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
7.2 Connector on Backlight Unit.
This connector is mounted on LED light-bar.
Connector Name / Designation Light Bar Connector
Manufacturer ENTERY INDUSTRIAL CO., LTD.
Type Part Number 3707K-Q06N-01R
7.2.1 Pin assignment
Pin no. Signal name
1 IRLED (current out)
2 IRLED (current out)
3 VLED (voltage in)
4 VLED (voltage in)
5 IRLED (current out)
6 IRLED (current out)
M240HW01 V8
document version 1.4 26
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
8.0 Reliability Test
Environment test conditions are listed as following table.
Items Required Condition
Temperature Humidity Bias (THB)
High Temperature Operation (HTO)
Low Temperature Operation (LTO)
High Temperature Storage (HTS)
Low Temperature Storage (LTS)
Vibration Test
(Non-operation)
Ta= 50
Ta= 50
Ta= 0
Ta= 60
Ta= -20
Acceleration: 1.5 Grms
Wave: Random
Frequency: 10 - 200 Hz
Duration: 30 Minutes each Axis (X, Y, Z)
к, 80%RH, 300hours
к, 50%RH, 300hours
к, 300hours
к, 300hours
к, 300hours
M240HW01 V8
Note
Acceleration: 50 G
Shock Test
(Non-operation)
Drop Test Height: 46 cm, package test
Thermal Shock Test (TST)
On/Off Test On/10sec, Off/10sec, 30,000 cycles
ESD (Electro Static Discharge)
Altitude Test
Wave: Half-sine
Active Time: 20 ms
Direction: X,ʳY,ʳZ (one time for each Axis)
к/30min, 60к/30min, 100 cycles
-20
Contact Discharge: ± 8KV, 150pF(330Ω ) 1sec,
15 points, 25 times/ point.
Air Discharge: ± 15KV, 150pF(330Ω ) 1sec
15 points, 25 times/ point.
Operation:10,000 ft
Non-Operation:30,000 ft
1
2
Note 1: The TFT-LCD module will not sustain damage after being subjected to 100 cycles of rapid
temperature change. A cycle of rapid temperature change consists of varying the temperature from
-2˃к to 6˃к, and back again. Power is not applied during the test. After temperature cycling, the
unit is placed in normal room ambient for at least 4 hours before power on.
Note 2: EN61000-4-2, ESD class B: Certain performance degradation allowed
No data lost
Self-recoverable
No hardware failures.
document version 1.4 27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
9.0 Shipping Label
The label is on the panel as shown below:
Manufactured: XX/XX
Model No: M240HW01 V.8
AU Optronics
Made in XXXXX
M240HW01 V8
Note 1: For Pb Free products, AUO will add
Note 2: For RoHS compatible products, AUO will add
Note 3: For China RoHS compatible products, AUO will add
for identification.
for identification.
for identification.
Note 4: The Green Mark will be presented only when the green documents have been ready by
AUO Internal Green Team.
document version 1.4 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Ver 1.2
10.0 Mechanical Characteristics
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Ver 1.2
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Ver 1.2
Avoid touching COF position
when doing mechanical design
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
p
11. Packing Specification
Module
www.panelook.com
Top cover
Paste protect film
Paste lamp wire
1pcs Module/ESD
Stretch film
Label
Corner angle
8 pcs/carton
Cushion
Carton
Moi sture-proof film
PET band
Put top cover
”H ”Ta
e
Corner angle
Pall et
Pallet and shipment information
Item
Specification
Q'ty Dimension Weight(kg)
1 Panel 1 556(H)mm x 323.2(V)mm x 14.4(D)mm 2.20
2 Cushion 1 - 1.51
3 Box 1 406(L)mm x 281(W)mm x 651(H)mm 1.185 without Panel & cushion
4 Packing Box 8 pcs/Box 406(L)mm x 281(W)mm x 651(H)mm
˅˃ˁ˅ˌ
5 Pallet 1 1140(L)mm x 830(W)mm x 138(H)mm 12
6 Pallet after Packing 16 boxes/pallet 1140(L)mm x 830(W)mm x 142.2(H)mm
ˆˆˉˁˉˇ
Remark
±0.08kg
with panel & cushion
Ver 0.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...