Atec EMP300K-5-500 User Manual
- Short Pulse Generator 350 kV
This generator is used to measure the performance of conductive points of entry and of
protective devices according to MIL-STD188-125-1/2 (PCI: pulse current injection). It produces
double exponential current pulses of short duration up to 5 kA. It can be fully controlled by a
computer through a RS232 and USB interface. We provide all the necessary accessories like
current probes, coupling and decoupling networks, fibre optic links, etc. The automation
software is also proposed as an option.
SPECIFICATIONS
Type EMP300K-5-500
Standard
Type
Peak erected voltage
Peak short circuit current
Source impedance
Current rise time (short circuit)
Current pulse length (short circuit)
Repetition frequency
Insulation
Output connector
Interface
Power rating
Storage / working temperature
Dimensions (control unit / generator)
MIL-STD-188-125-1 and -2 / short pulse
Marx + peaking
50 to 350 kV, positive only
5 kA max
60 ohm
< 20 ns
500 - 550 ns (FWHM)
1 pulse every 30 sec
SF6 and N2
custom (connecting bar)
RS 232 and USB
210 - 250 Vac / 50 - 60 Hz / 600 VA
5 - 50 °C / 10 - 45 °C
45 x 19 x 56 cm / 60 x 42 x 188 cm (W x H x L)
Weight (control unit / generator)
montena technology - 1728 Rossens - Switzerland - phone + 41 26 411 84 84 - fax + 41 26 411 17 79
www.montena.com e-mail: products@montena.com
13 / 175 kg
Loading...