Atec EMP10K-5-500 User Manual
- Short Pulse Generator 10 kV
This generator is used to measure the performance of points of entry and of protective devices
according to MIL-STD188-125-1/2 (PCI: pulse current injection). It produces double exponential
current pulses of short duration. As an alternative to the 80 kV / 1.2 kA generator, this
equipment allows the test of each wire of a cable bundle for which the total current of 5 kA is
split in each connection. An important advantage of this generator is the wide amplitude range
from less than 0.2 kV to 10 kV. It can be fully controlled by a computer through a RS232 and
USB interface. We also provide all the necessary accessories like current probes, coupling and
decoupling networks, fibre optic links, etc. The automation software is also proposed as an
option.
SPECIFICATIONS
Type EMP10K-5-500
Standard
Peak open circuit voltage
Source impedance
Peak short circuit current
Rise time of the current (short circuit)
Pulse length (FWHM) (short circuit)
Charging time
Output connectors
Interface
Power rating
Storage / working temperature
Dimensions
Weight
MIL-STD-188-125-1 and -2 / short pulse
typically ≤ 0.2 kV to ≥ 12 kV, positive only
≥ 60 ohm
≥ 200A
< 20 ns
500 - 550 ns
< 10 sec
LEMO type FFA 3Y415
RS 232 / USB
85 - 264 Vac / 50 - 60 Hz / 150 VA
5 - 50 °C / 15 - 45 °C
56 x 19 x 45 cm (L x H x W)
15 kg
montena technology - 1728 Rossens - Switzerland - phone + 41 26 411 84 84 - fax + 41 26 411 17 79
www.montena.com e-mail: products@montena.com
Loading...