Page 1
6509 Loop Antenna
search
Go
Frequency Range: 1 kHz - 30 MHz. The Model 6509 is a passive
loop antenna designed for shielding effectiveness and immunity.
Description Config Specs Charts All Info
Key Features
Individually Calibrated
Switchable four-band transformer
Two Year Warranty
Description
The base of the Model 6509 loop antenna contains a type N female connector and a manually switchable four-band transformer. The
transformer gives the antenna greater efficiency resulting in a better conversion of power to field strength.
Every loop antenna is individually calibrated in accordance with the IEEE-291 Section 2.3.1 methods, using NIST traceable equipment. By
knowing the actual antenna factors and performance characteristics of an antenna instead of typical data, you can more accurately measure
field strength in your tests.
Standard Configuration
Mounting Bracket drilled accepts an ETS-Lindgren or other tripod mount with standard 1/4 in x 20 threads.
Antenna/loop assembly
Options
Individually calibrated per IEEE STD 291. Actual individual calibration factors and signed Certificate of Calibration Conformance
included in Manual.
Custom cases are available on request.
Page 2
Electrical Specifications
Frequency Minimum 1 kHz
Frequency Maximum 30 MHz
Connectors Type N (f)
Impedance (Nominal) 50 Ω
Maximum Input Power 1 kW
Pattern Type omnidirectional
Polarization linear
Physical Specifications
Height 47.8 cm (18.82 inches)
Length 15.25 cm (6.00 inches)
Weight 1.3 kg ( 2.87 lb )
Width 7.63 cm (3.00 inches)
Technical Charts
6509 Loop Antenna Electric Antenna Factor
6509 Loop Antenna Magnetic Antenna Factor
© 2012 ETS- Lindgren Privacy Site Map Careers
Loading...