No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless
such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation and to the
owners’ benet, without intent to infringe.
Offer to Provide Source Code of Certain Software
This product contains copyrighted software that is licensed under the General Public License (“GPL”),
under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software
Licenses. Such software in this product is distributed without any warranty to the extent permitted by the
applicable law. Copies of these licenses are included in this product.
Where the applicable license entitles you to the source code of such software and/or other additional data,
you may obtain it for a period of three years after our last shipment of the product, either
(1) for free by downloading it from http://support.asus.com/download
or
(2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location
where you want to have it shipped to, by sending a request to:
ASUSTeK Computer Inc.
Legal Compliance Dept.
15 Li Te Rd.,
Beitou, Taipei 112
Taiwan
In your request please provide the name, model number and version, as stated in the About Box of the
product for which you wish to obtain the corresponding source code and your contact details so that we
can coordinate the terms and cost of shipment with you.
The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as
the corresponding binary/object code.
This offer is valid to anyone in receipt of this information.
ASUSTeK is eager to duly provide complete source code as required under various Free Open Source
Software licenses. If however you encounter any problems in obtaining the full corresponding source
code we would be much obliged if you give us a notication to the email address gpl@asus.com, stating
the product and describing the problem (please DO NOT send large attachments such as source code
archives, etc. to this email address).
ii
Contents
Safety information ....................................................................................................... v
About this guide .......................................................................................................... v
Package contents ...................................................................................................... vii
Z170-E specifications summary............................................................................... vii
Chapter 1: Product Introduction
1.1 Before you proceed ...................................................................................1-1
ASUS contact information ...................................................................................... A-5
iv
Safety information
Electrical safety
• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet
before relocating the system.
• When adding or removing devices to or from the system, ensure that the power cables
for the devices are unplugged before the signal cables are connected. If possible,
disconnect all power cables from the existing system before you add a device.
• Before connecting or removing signal cables from the motherboard, ensure that all
power cables are unplugged.
• Seek professional assistance before using an adapter or extension cord. These devices
could interrupt the grounding circuit.
• Ensure that your power supply is set to the correct voltage in your area. If you are not
sure about the voltage of the electrical outlet you are using, contact your local power
company.
• If the power supply is broken, do not try to x it by yourself. Contact a qualied service
technician or your retailer.
Operation safety
• Before installing the motherboard and adding components, carefully read all the manuals
that came with the package.
• Before using the product, ensure all cables are correctly connected and the power
cables are not damaged. If you detect any damage, contact your dealer immediately.
• To avoid short circuits, keep paper clips, screws, and staples away from connectors,
slots, sockets and circuitry.
• Avoid dust, humidity, and temperature extremes. Do not place the product in any area
where it may be exposed to moisture.
• Place the product on a stable surface.
• If you encounter technical problems with the product, contact a qualied service
technician or your retailer.
About this guide
This user guide contains the information you need when installing and conguring the
motherboard.
How this guide is organized
This guide contains the following parts:
•Chapter1:ProductIntroduction
This chapter describes the features of the motherboard and the new technology it
supports. It includes descriptions of the switches, jumpers, and connectors on the
motherboard.
•Chapter2:BIOSSetup
This chapter discusses changing system settings through the BIOS Setup menus.
Detailed descriptions for the BIOS parameters are also provided.
v
Where to find more information
Refer to the following sources for additional information and for product and software
updates.
1. ASUS websites
The ASUS website provides updated information on ASUS hardware and software
products. Refer to the ASUS contact information.
2. Optional documentation
Your product package may include optional documentation, such as warranty yers,
that may have been added by your dealer. These documents are not part of the
standard package.
Conventions used in this guide
To ensure that you perform certain tasks properly, take note of the following symbols used
throughout this manual.
DANGER/WARNING: Information to prevent injury to yourself when
completing a task.
CAUTION: Information to prevent damage to the components when
completing a task.
IMPORTANT: Instructions that you MUST follow to complete a task.
NOTE: Tips and additional information to help you complete a task.
Typography
Bold text
Italics
<Key>Keys enclosed in the less-than and greater-than sign
<Key1> + <Key2> + <Key3>If you must press two or more keys simultaneously, the key
vi
Indicates a menu or an item to select.
Used to emphasize a word or a phrase.
means that you must press the enclosed key.
Example: <Enter> means that you must press the Enter or
Return key.
names are linked with a plus sign (+).
Package contents
Check your motherboard package for the following items:
Motherboard
Cables
ASUS Z170-E Motherboard
2 x Serial ATA 6.0 Gb/s cables
1 x ASUS SLI bridge connector
Accessories
1 x M.2 screw package
1 x CPU installation tool
Application DVD
Documentation
If any of the above items is damaged or missing, contact your retailer.
- Supports jack-detection, multi-streaming, front panel jack-retasking (MIC)
Intel® Z170 Express Chipset- supports ASUS USB 3.1 Boost
- 6 x USB 3.0/2.0 ports (4 ports at mid-board, 2 ports at back panel, blue)
- 6 x USB 2.0/1.1 ports (4 ports at mid-board, 2 ports at back panel)
ASMedia® USB 3.1 controllers- supports ASUS USB 3.1 Boost and 3A power
output
- 1 x USB 3.1/3.0/2.0 port at back panel (Type-C)
viii
(continued on the next page)
Z170-E specifications summary
Superb Performance
OC Design - ASUS PRO Clock Technology
- Full BCLK range for extreme overclocking performance
5-Way Optimization
- Whole system optimization with a single click! Perfectly consolidates better
CPU performance, power saving, digital power control, system cooling and app
usages
DIGI+ VRM
- CPU Power: Digital 4-phase power design
- iGPU Power: Digital 2-phase power design
TPU
- Auto Tuning, TPU, GPU Boost
EPU
- EPU
ASUS
Exclusive
Features
Fan Xpert 3 featuring Fan Auto Tuning function and multiple thermistors
Turbo App featuring system performance tuning, network priority, and audio
UEFI BIOS
- Most advanced options with fast response time
Special Memory O.C. Design
- Superb memory O.C. capability under full load by minimizing the coupling noise
and signal reection effect
PC Cleaner
- Fast and easy way to get rid of unnecessary junk les
Remote Entertainment
Media Streamer
- Pipe music or movies from your PC to a smart TV, your entertainment goes
wherever you go!
- Media Streamer app for portable smartphone/tablet, supporting iOS 7 &
Android 4.0 systems and above
HyStream
- Stream iOS devices’ screen on your PC screen*
* Contact your device vendor for supporting information.
selection for optimized system cooling control
scene conguration for selected applications
(continued on the next page)
ix
Z170-E specifications summary
eSports Champions
Turbo LAN
- Fast and smooth online gaming with lower pings and less lags
Crystal Sound 2
- Hear the cleanest sound with dedicated audio design onboard!
Turbo APP
- Tailored app performance, network priority and audio conguration for your
ASUS
Exclusive
Features
ASUS Special
Features
needs
EZ DIY
Push Notice
- Monitor your PC status with smart devices in real time
UEFI BIOS EZ Mode featuring friendly graphics user interface
- CrashFree BIOS 3
- EZ Flash 3
ASUS Q-Design
- ASUS Q-LED (CPU, DRAM, VGA, Boot Device LED)
- ASUS Q-Slot
- ASUS Q-DIMM
ASUS 5X Protection II
- ASUS LANGuard - 2.5x higher surge tolerance
- ASUS Overvoltage Protection - World-class circuit-protecting power design
- ASUS DIGI+ VRM - 4 Phase digital power design
- ASUS DRAM Overcurrent Protection - Prevents damage from short circuits
- ASUS Stainless-Steel Back I/O - 3x corrosion-resistance for greater durability
Special Features
- Mobo Connect
- LANGuard
- USB 3.1 Boost
- Ai Charger+
- AI Suite 3
- MemOK!
- EZ XMP
(continued on the next page)
x
Z170-E specifications summary
ASUS Quiet
Thermal
Solution
ASUS
Exclusive
Overclocking
Features
Rear Panel I/O
Ports
Internal I/O
Connectors
Quiet Thermal Design:
- ASUS Fan Xpert 3
- ASUS Fanless Design: Heat-sink solution
Precision Tweaker 2:
- CPU Core/Cache Voltage: Adjustable CPU Core/Cache Voltage at 0.005V
increment
- CPU Graphics Voltage: Adjustable CPU Graphics voltage at 0.005V increment
- CPU VCCIO Voltage: Adjustable CPU VCCIO Voltage at 0.0125V increment
- CPU System Agent Voltage: Adjustable CPU System Agent Voltage at 0.0125V
increment
- DRAM Voltage: 152-step Memory voltage control
- PCH Core Voltage: 88-step Chipset voltage control
SFS (Stepless Frequency Selection)
- BCLK/PCIE frequency tuning from 40MHz up to 500MHz at 0.01MHz increment
Overclocking Protection:
- ASUS C.P.R.(CPU Parameter Recall)
1 x PS/2 Keyboard/mouse combo port
1 x HDMI port
1 x DVI-D port
1 x Intel LAN (RJ45) port
1 x USB 3.1/3.0/2.0 port (Type C)
2 x USB 3.0/2.0 ports (blue)
2 x USB 2.0 ports
8-channel Audio I/O ports
2 x USB 3.0/2.0 connectors support additional 4 USB ports (19-pin)
2 x USB 2.0/1/1 connectors support additional 4 USB ports
1 x M.2 Socket 3 (for M Key, type 2242/2260/2280/22110 storage devices)
1 x SATA Express connector (gray)
4 x SATA 6.0 Gb/s connectors (gray)
1 x CPU Fan connector (4-pin) for both 3-pin (DC mode) and 4-pin (PWM mode)
CPU coolers control with auto detection support
1 x CPU OPT Fan connector (4-pin)
1 x Water Pump header (4-pin)
2 x Chassis Fan connectors (4-pin) for both 3-pin (DC mode) and 4-pin (PWM
mode) coolers control
1 x Front panel audio connector (AAFP)
(continued on the next page)
xi
Z170-E specifications summary
1 x S/PDIF out header
1 x Thunderbolt header (5-pin) for ASUS ThunderboltEX series support
1 x TPM connector
1 x COM port
1 x 24-pin EATX Power connector
Internal I/O
Connectors
BIOS Features
Manageability
Accessories
Support DVD
Operating
System
Support
Form FactorATX Form Factor, 12”x 9.2” (30.5cm x 23.4cm)
1 x 8-pin EATX 12V Power connector
1 x System Panel
1 x Speaker header
1 x MemOK! button
1 x Clear CMOS jumper
1 x DRCT (Direct Key) connector
1 x 5-pin EXT_FAN (Extension Fan) connector
128 Mb Flash ROM, UEFI AMI BIOS, PnP, DMI3.0, WfM2.0, SM BIOS 3.0,
ACPI 5.0, Multi-language BIOS, ASUS EZ Flash 3, CrashFree BIOS 3, F11 EZ
Tuning Wizard, F6 Qfan Control, F3 My Favorites, Quick Note, Last Modied
log, F12 PrintScreen and ASUS DRAM SPD (Serial Presence Detect) memory
information
WfM 2.0, DMI 3.0, WOL by PME, PXE
2 x Serial ATA 6.0Gb/s cables
1 x ASUS SLI bridge connector
1 x M.2 screw package
1 x User’s manual
1 x CPU installation tool
Drivers
ASUS Utilities
EZ Update
Anti-virus software (OEM version)
Windows® 10*
Windows® 8.1*
Windows® 7
*64-bit supported only
Specications are subject to change without notice.
xii
Chapter 1: Product Introduction
Product Introduction
1
1.1 Before you proceed
Take note of the following precautions before you install motherboard components or change
any motherboard settings.
• Unplug the power cord from the wall socket before touching any component.
• Before handling components, use a grounded wrist strap or touch a safely grounded
object or a metal object, such as the power supply case, to avoid damaging them due
to static electricity.
• Hold components by the edges to avoid touching the ICs on them.
• Whenever you uninstall any component, place it on a grounded antistatic pad or in the
bag that came with the component.
• Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so
may cause severe damage to the motherboard, peripherals, or components.
1.2 Motherboard overview
Before you install the motherboard, study the conguration of your chassis to ensure that the
motherboard ts.
Unplug the power cord before installing or removing the motherboard. Failure to do so can
cause you physical injury and damage to motherboard components.
1.2.1 Placement direction
When installing the motherboard, place it into the chassis in the correct orientation. The edge
with external ports goes to the rear part of the chassis.
ASUS Z170-E Series
1-1
1.2.2 Screw holes
Place nine screws into the holes indicated by circles to secure the motherboard to the
chassis.
Do not overtighten the screws! Doing so can damage the motherboard.
Place this side towards
the rear of the chassis
1-2
Chapter 1: Product Introduction
1.2.3 Motherboard layout
ASUS Z170-E Series
1-3
1.2.4 Layout contents
Connectors/Jumpers/Slots/LEDPage
1.Intel® LGA1151 CPU socket
2.CPU, water pump, CPU optional, extension, and chassis fan connectors
(4-pin CPU_FAN; 4-pin W_PUMP; 4-pin CPU_OPT; 5-pin EXT_FAN; 4-pin
CHA_FAN1-2)
3.DDR4 DIMM slots1-9
4.MemOK! button1-37
5.ATX power connectors (24-pin EATXPWR, 8-pin EATX12V)1-27
6.USB 3.0 connectors (20-1 pin USB3_12, USB3_34)
7. Intel® Z170 Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_12,
SATA6G_34, SATA6G_56, SATA Express)
8.M.2 Socket 31-29
9.DirectKey connector (2-pin DRCT)1-28
10. Clear RTC RAM (2-pin CLRTC)1-20
11. System warning speaker header (4-pin SPEAKER)1-30
12. System panel connector (10-1 pin PANEL)1-31
13. USB 2.0 connectors (10-1 pin USB1112, USB1314)1-32
14. Thunderbolt header (5-pin TB_HEADER)1-34
15. TPM connector (14-1 pin TPM)1-30
16. Serial port connector (10-1 pin COM)1-24
17. Front panel audio connector (10-1 pin AAFP)1-29
18. Digital audio connector (4-1 pin SPDIF_OUT)1-28
19. CPU Over Voltage jumper (3-pin CPU_OV)1-21
1-5
1-26
1-33
1-25
1-4
Chapter 1: Product Introduction
1.3 Central Processing Unit (CPU)
The motherboard comes with a surface mount LGA1151 socket designed for the 6th
Generation Intel® Core™ i7/ i5/ i3, Pentium®, and Celeron® processors.
Ensure that you install the correct CPU designed for LGA1151 socket only. DO NOT install
a CPU designed for other sockets on the LGA1151 socket.
• Ensure that all power cables are unplugged before installing the CPU.
• Upon purchase of the motherboard, ensure that the PnP cap is on the socket and
the socket contacts are not bent. Contact your retailer immediately if the PnP cap
is missing, or if you see any damage to the PnP cap/socket contacts/motherboard
components. ASUS will shoulder the cost of repair only if the damage is shipment/
transit-related.
• Keep the cap after installing the motherboard. ASUS will process Return Merchandise
Authorization (RMA) requests only if the motherboard comes with the cap on the
LGA1150 socket.
• The product warranty does not cover damage to the socket contacts resulting from
incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP
cap.
ASUS Z170-E Series
1-5
1.3.1 Installing the CPU
Top of CPU
1-6
Bottom of CPU
Bottom of CPU
Chapter 1: Product Introduction
Top of CPU
ASUS Z170-E Series
1-7
1.3.2 CPU heatsink and fan assembly installation
Apply the Thermal Interface Material to the
CPU heatsink and CPU before you install
the heatsink and fan, if necessary.
To install the CPU heatsink and fan assembly
1-8
Chapter 1: Product Introduction
To uninstall the CPU heatsink and fan assembly
1.4 System memory
1.4.1 Overview
The motherboard comes with four Double Data Rate 4 (DDR4) Dual Inline Memory Modules
(DIMM) slots.
A DDR4 module is notched differently from a DDR, DDR2, or DDR3 module. DO NOT
install a DDR, DDR2, or DDR3 memory module to the DDR4 slot.
ASUS Z170-E Series
1-9
Recommended memory configurations
1.4.2 Memory configurations
You may install 1 GB, 2 GB, 4 GB, 8GB, and 16 GB unbuffered non-ECC DDR4 DIMMs into
the DIMM sockets. You can refer to the recommended memory population below.
• You may install varying memory sizes in Channel A and Channel B. The system
maps the total size of the lower-sized channel for the dual-channel conguration. Any
excess memory from the higher-sized channel is then mapped for single-channel
operation.
• Always install DIMMs with the same CAS latency. For optimal compatibility, we
recommend that you install memory modules of the same version or date code (D/C)
from the same vendor. Check with the retailer to get the correct memory modules.
• Due to the memory address limitation on 32-bit Windows® OS, when you install 4GB
or more memory on the motherboard, the actual usable memory for the OS can be
about 3GB or less. For effective use of memory, we recommend that you do any of the
following:
a) Use a maximum of 3GB system memory if you are using a 32-bit Windows® OS.
b) Install a 64-bit Windows® OS when you want to install 4 GB or more on the
motherboard.
c) For more details, refer to the Microsoft® support site at http://support.microsoft.
com/kb/929605/en-us.
• This motherboard does not support DIMMs made up of 512 Mb (64 MB) chips or less.
1-10
• The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value. To operate at the vendor-marked
or at a higher frequency, refer to section 2.5 Ai Tweaker menu for manual memory
frequency adjustment.
• For system stability, use a more efcient memory cooling system to support a full
memory load (4 DIMMs).
• Visit the ASUS website at: www.asus.com for the latest QVL.