ASUS Z00TD User Manual

First Edition/ August 2015

Model: ZE551KL (ASUS_Z00TD)

Before you start, ensure that you have read all the safety information and operating instructions in this User Guide to prevent injury or damage to your device.

NOTE: For the latest updates and more detailed information, please visit www.asus.com.

Front features
User Guide			Receiver
LED indicator				Sensor
								Front camera
									Touch screen
									display

Touch keys

Side features

Audio jack

Power Key

Groove

Microphone Micro USB port

NOTE: Pry open the rear cover from the groove.

Rear features

Rear camera

Camera flash

Laser focus

Volume key

Rear cover

Speaker

NOTES:

•Remove the rear cover to display the dual micro

SIM and microSD card slots.

•The micro SIM card slots support LTE, WCDMA, and GSM/EDGE network bands.

•The microSD card slot supports microSD and microSDHC card formats.

E10822

Charging your ASUS Phone

To charge your ASUS Phone:

1.Connect the USB connector into the power adapter’s

USB port.

2.Connect the other end of the micro USB cable to your ASUS Phone.

3.Plug the power adapter into a wall socket.

3	2

1

IMPORTANT!

•When using your ASUS Phone while it is plugged to a power outlet, the grounded power outlet must be near to the unit and easily accessible.

•When charging your ASUS Phone through your computer, ensure that you plug the micro USB cable to your computer’s USB 2.0 / USB 3.0 port.

•Avoid charging your ASUS Phone in an

environment with ambient temperature of above 35oC (95oF).

NOTES:

•Use only the power adapter that came with your device. Using a different power adapter may damage your device.

•Using the bundled power adapter and ASUS Phone signal cable to connect your ASUS Phone to a power outlet is the best way to charge your ASUS Phone.

•The input voltage range between the wall outlet and this adapter is AC 100V - 240V. The output voltage of the micro USB cable is DC +5.2V, 1A, 5W.

Installing a micro SIM card

To install a micro SIM card:

1.Locate the groove on the

bottom-right corner of your

ASUS Phone.

2.Pry the cover loose

and then pull the rear cover off.

3.Remove the battery.

4.Insert the micro SIM card into one of the micro SIM card slots.

Micro SIM card slot 2

Micro SIM/ microSD combo card slot

NOTE: The micro SIM card slot 1 is at the lower part of the micro SIM/ microSD combo card slot.

IMPORTANT: Both micro SIM card slots support 3G

WCDMA/ 4G LTE network band. But only one micro SIM card can connect to 3G WCDMA/ 4G LTE service at a time.

CAUTION: Do not use sharp tools or solvent on your device to avoid scratches on it.

Installing a microSD card

To install a microSD card:

1.Locate the groove on the

bottom-right corner of your

ASUS Phone.

2.Pry the cover loose

and then pull the rear cover off.

3. Remove the battery.

4.Insert the microSD card into the microSD card slot.

Micro SIM/ microSD combo card slot

NOTE: The microSD card slot is at the upper part of the micro SIM/ microSD combo card slot.

Federal Communications Commission Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

The antenna(s) used for this transmitter must not be colocated or operating in conjunction with any other antenna or transmitter.

The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only.

The FCC ID for this device is MSQZ00TD.

Safety information

ASUS Phone care

•Use your ASUS Phone in an environment with ambient temperatures between -10 °C (14 °F) and 35 °C (95 °F).

The battery

Your ASUS Phone is equipped with a high performance detachable Li-Ion battery. Observe the maintenance guidelines for a longer battery life.

•Avoid charging in extremely high or low temperature.

The battery performs optimally in an ambient temperature of +5 °C to +35 °C.

•Use only ASUS battery. Using a different battery may cause physical harm/injury and may damage your device.

•Do not remove and soak the battery in water or any other liquid.

•Never try to open the battery as it contains substances that might be harmful if swallowed or allowed to come into contact with unprotected skin.

•Do not remove and short-circuit the battery, as it may overheat and cause a fire. Keep it away from jewelry or metal objects.

•Do not remove and dispose of the battery in fire. It could explode and release harmful substances into the environment.

•Do not remove and dispose of the battery with your regular household waste. Take it to a hazardous material collection point.

•Do not touch the battery terminals.

NOTES:

•Risk of explosion if battery is replaced by an incorrect type.

•Dispose of used battery according to the instructions.

The highest FCC SAR value for the device is 1.37 W/ kg@1g.

Canada, Industry Canada (IC) Notices

This device complies with Industry Canada’s licenceexempt RSSs. Operation is subject to the following two conditions:

(1)This device may not cause interference; and

(2)This device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:

(1)l'appareil ne doit pas produire de brouillage, et

(2)l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement."

CAN ICES-3(B)/NMB-3(B)

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

The IC ID for this device is 3568A-Z00TD.

L’identifiant Industrie Canada de cet appareil est: 3568A-Z00TD.

RF Exposure Information (SAR)

To reduce exposure to RF energy, use a hands-free accessory or other similar option to keep this device away from your head and body. Carry this device at least

15 mm away from your body to ensure exposure levels remain at or below the as-tested levels. Choose the belt clips, holsters, or other similar body-worn accessories which do not contain metallic components to support operation in this manner. Cases with metal parts may change the RF performance of the device, including its compliance with RF exposure guidelines, in a manner

The charger

•Use only the charger supplied with your ASUS

Phone.

•Never pull the charger cord to disconnect it from the power socket. Pull the charger itself.

Caution

Your ASUS Phone is a high quality piece of equipment. Before operating, read all instructions and cautionary markings on the (1) AC Adapter.

•Do not use the ASUS Phone in an extreme environment where high temperature or high humidity exists. The ASUS Phone performs optimally in an ambient temperature between -10 °C (14 °F) and 35 °C (95 °F).

•Do not disassemble the ASUS Phone or its accessories. If service or repair is required, return the unit to an authorized service center. If the unit is disassembled, a risk of electric shock or fire may result.

•Do not short-circuit the battery terminals with metal items.

Operator access with a tool

If a TOOL is necessary to gain access to an OPERATOR ACCESS AREA, either all other compartments within that area containing a hazard shall be inaccessible

to the OPERATOR by the use of the same TOOL, or such compartments shall be marked to discourage

OPERATOR access.

ASUS Recycling/Takeback Services

ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials.

Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions.

that has not been tested or certified, and use such accessories should be avoided.

CE RF Exposure Compliance

This device meets the EU requirements (1999/519/EC) on the limitation of exposure of the general public to electromagnetic fields by way of health protection.

For body-worn operation, this device has been tested and meets the ICNIRP guidelines and the European Standard EN 62209-2, for use with dedicated accessories. SAR is measured with this device at a separation of 1.5 cm to the body, while transmitting at the highest certified output power level in all frequency bands of this device. Use of other accessories which contain metals may not ensure compliance with ICNIRP exposure guidelines.

CE Mark Warning

56

CE marking for devices with wireless LAN/ Bluetooth

This equipment complies with the requirements of

Directive 1999/5/EC of the European Parliament and Commission from 9 March, 1999 governing Radio and

Telecommunications Equipment and mutual recognition of conformity.The highest CE SAR values for the device are as follows:

•0.361 W/kg@10g (Head)

•0.313 W/kg@10g (Body)

Regional notice for Singapore

This ASUS Phone complies with IDA Standards.

Laser Safety Information

Class 1 LASER PRODUCT

Proper disposal

Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.

DO NOT throw the battery in municipal waste. The symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste.

DO NOT throw this product in municipal waste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment and mercury-containing button cell battery) should not be placed in municipal waste.

Check local regulations for disposal of electronic products.

DO NOT throw this product in fire. DO NOT short circuit the contacts. DO NOT disassemble this product.

Using GPS (Global Positioning System) on your ASUS Phone

To use the GPS positioning feature on your ASUS Phone:

•Ensure that your device is connected to the

Internet before using Google Map or any GPSenabled apps.

•For first-time use of a GPS-enabled app on your device, ensure that you are outdoors to get the best positioning data.

•When using a GPS-enabled app on your device inside a vehicle, the metallic component of the car window and other electronic devices might affect the GPS performance.

Prevention of Hearing Loss

To prevent possible hearing damage, do not listen at high volume levels for long periods.

For France, headphones/earphones for this device are compliant with the sound pressure level requirement laid down in the applicable EN 50332-1:2013 and/or EN50332-2:2013 standard required by French Article L.5232-1.

ASUS

Address: 15 Li-Te Road, Peitou, Taipei, Taiwan

Tel: [phone]

Fax: [phone]

Declaration

We declare that the IMEI codes for this product, ASUS Phone, are unique to each unit and only assigned to this model. The IMEI of each unit is factory set and cannot be altered by the user and that it complies with the relevant IMEI integrity related requirements expressed in the GSM standards.

Should you have any questions or comments regarding this matter, please contact us.

Sincerely yours,

ASUSTeK COMPUTER INC.

Tel: [phone]

Fax: [phone]

Support:

http://vip.asus.com/eservice/techserv.aspx

Copyright © 2015 ASUSTeK COMPUTER INC. All Rights Reserved.

You acknowledge that all rights of this Manual remain with ASUS. Any and all rights, including without limitation, in the Manual or website, and shall remain the exclusive property of ASUS and/or its licensors. Nothing in this Manual intends to transfer any such rights, or to vest any such rights to you.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS.

ZenTalk Fans Forum (http://www.asus.com/zentalk/global_forward.php)

15060-67700000